Skip to main content Skip to search Skip to main navigation
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Mach-Dich-bereit zusätzlicher Header für Kategorien
Defender, Discovery I & II, RRC

Filter products

Checker Plate Tank Connector for Defender

Chequer Plate Cowling Tank Spout Land Rover Defender

Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.

Product number: RBTS-ELM
Weight: 1,0 kg
Parcel shipping
This article is available in different versions

Regular price: From €29.00

Prices incl. VAT;

EBC Greenstuff 6000 Brake Pads

EBC Greenstuff 6000 Brake Pads for 4x4 and SUV

Vehicle model: Land Rover Defender - front axle - free registration

EBC Greenstuff 6000 Brake Pads EBC Greenstuff 6000 brake pads have been designed for heavy off-road vehicles and SUV that need to be stopped fast and efficiently both on and off the road. The Greenstuff pad is tried and tested and is proven to stop your car approx 20 feet (9 metres) quicker than standard Pads from 60mph which is a an impressive braking improvement of 15% offering better brake effect up to 600°C (1100°F) with almost no brake fading. The Greenstuff pads will work better at higher temperatures than standard pads giving you confidence for spirited street driving and perform well on cars under 200bhp. Features: capable of repeated heavy brake use without brake “Fall-Off”. very minimal disc/rotor damage characteristics. ECE R 90 type approved for most cars. features red “brake in’ surface coating for instant safe braking after install. The brake pads are supplied in pairs, i.e. as a full set for one axle. The pads can be supplied for a large variety of vehicles. Please choose your desired vehicle:

Product number: NADP6-708
Weight: 3,1 kg
Parcel shipping

Delivery time 5-10 working days

Regular price: €156.00

Prices incl. VAT;

With clamp closures for easy filling

Cargo Net Mesh for Land Rover Defender until BJ 2016

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

Product number: CN-DEF-BLKM
Weight: 1,2 kg
Parcel shipping
This article is available in different versions

Regular price: €129.00

Prices incl. VAT;

Running Boards with checker plate for Defender

Running board round tube, for Land Rover Defender 90/110

Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.

Product number: TBVZP-90M
Weight: 16,0 kg
Freight forwarding
This article is available in different versions

Regular price: From €375.00

Prices incl. VAT;

Dashboard Console for switches and additional instruments

Dashboard Console for switches and additional instruments

Versatile console for installing 3 or 5 round instruments, switches, displays and sockets Console for installing either up to 3 or 5 round instruments (52 mm) or various switches, displays, sockets etc. Supplied unequipped! Whether rev counter, exhaust gas temperature display, our useful second-zone thermometer or a socket - over time, the need for flat surfaces in the vehicle cockpit that allow clean installation increases. With the two dashboard consoles, this problem is solved regardless of the vehicle - only a flat surface is required. The plastic front panel of the consoles can be easily cut out or drilled so that a variety of different displays, switches and instruments can be mounted. The console can be mounted vertically or suspended on any flat surface. It is ideal for accommodating the Carlingtech Contura switches, the VDO 52 mm round instruments or the BlueSea 12 V and double USB sockets. Dimensions DSBU-3: 230x105x80 mm Dimensions DSBU-5: 344x105x80 mm Please select the desired size of the console.  

Product number: DSBU-3M
Weight: 0,5 kg
Parcel shipping
This article is available in different versions

Regular price: From €69.00

Prices incl. VAT;

Defender LED rear fog light

LED rear fog lamp for Land Rover Defender until MY2016, 95mm, clear. Ready to plug in!

LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.

Product number: NSL-DEF-CLEAR
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €61.90

Prices incl. VAT;

Valve cover gasket, Defender TD4 2.4l

Valve cover gaskets for TD4 and TD5

Valve cover gaskets selectable for different vehicles: Td4 - suitable for 2.4 Diesel from MY 2007 Td4 - suitable for Defender Puma 2.2l TD5 - suitable for Discovery 2, Defender from MY 2004TD5 - suitable for Discovery up to MY 2002

Product number: LR058092GM
Weight: 0,1 kg
Parcel shipping
This article is available in different versions

Regular price: From €16.00

Prices incl. VAT;

Defender LED Nebelschlussleuchte

LED Tail Light / Brake Light for Land Rover Defender, 95mm, smoke grey. Ready to plug in!

LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!    

Product number: NSL-DEF-SMOKE
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €61.90

Prices incl. VAT;

Nakatanenga LED Interior Light Hunter

Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white

Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)    

Product number: NAIRLWR-UNI-WWM
Weight: 1,1 kg
Parcel shipping
This article is available in different versions

Regular price: €147.00

Prices incl. VAT;

Koni HeavyTrack shock absorbers for front axle for Defender, Discovery and Range Rover

KONI HeavyTrack shock absorber Land Rover Defender / Disco 1 / Range Rover Classic - front axle

Precision and Control for Your Steering Axle If you want to elevate the handling of your Land Rover Defender, Discovery 1, or Range Rover Classic to a new level, especially concerning steering precision and control in off-road conditions, the KONI HeavyTrack shock absorbers for the front axle are the top choice. Nakatanenga presents you with these high-performance dampers, specially designed to maximize the performance of your steering axle while providing robustness for off-road use. Why KONI HeavyTrack shock absorbers on the front axle of your Land Rover make the difference: The KONI HeavyTrack series is the answer to the diverse demands placed on modern SUVs and classic off-road vehicles. They combine superior on-road handling with unyielding performance off the beaten path: Significantly improved steering behavior: Experience more direct feedback from the front axle, more precise steering maneuvers, and significantly reduced body roll in corners. Your vehicle will feel more agile and controlled. Optimal damping for every situation: The shock absorbers react sensitively to changing road conditions and ensure maximum tire-to-ground contact. This not only improves traction and braking performance but also overall driving safety. Individually adjustable rebound damping: A hallmark of KONI quality is the ability to adjust the dampers' rebound to your personal driving style, vehicle load, or wear. This adjustability ensures long-lasting optimal performance. Built to last (almost): The use of the highest quality materials and advanced manufacturing technologies makes KONI dampers extremely resistant to the rigors of off-road driving and guarantees a long service life. Precise tuning for the front axle: This specific model has been carefully developed for the dynamic requirements of the front axle of your Land Rover Defender, Discovery 1, or Range Rover Classic. It harmonizes perfectly with standard as well as lift springs. The decisive upgrade for your Land Rover suspension Whether in daily use, on expeditions with a full load, or on challenging off-road tracks – the KONI HeavyTrack shock absorbers for the front axle are a guarantee for a confident driving experience. This investment in the suspension optimization of your Land Rover pays off with an increase in safety, comfort, and driving pleasure. Nakatanenga is at your side not only with the right shock absorbers but also with comprehensive expertise for your Land Rover suspension. All advantages at a glance: Excellent road holding and increased comfort Improved vehicle stability and superior steering precision Superior off-road performance Adjustable damping force (rebound) for individual customization Premium quality and exceptional durability Tailor-made for the front axle of Defender, Discovery 1, Range Rover Classic Give the front axle of your Land Rover a top-class performance upgrade with KONI HeavyTrack shock absorbers! Secure yours now conveniently online at Nakatanenga – your partner for first-class off-road equipment. Note: For optimal suspension balance and performance, we always recommend replacing shock absorbers axle by axle (i.e., in pairs at the front or rear). On this occasion, also check the condition of your shock absorbers on the rear axle.

Product number: 8240-1181SPX
Weight: 3,0 kg
Parcel shipping

Delivery time 5-10 working days

Regular price: €205.00

Prices incl. VAT;

LOF Clutches POWERspec Brake Pads for Defender 90 Rear Axle (MY1994-2016)

LOF Clutches POWERspec Brake Pads for Defender

4x Brake Pads - LOF Brake Pad and Mounting Kit   POWERspec brake pads: LOF POWERspec brake pads are designed for tuned and modified hard working axles.High braking power, improved coefficient of friction (0.57). Designed for fast road use to stop heavily loaded vehicles, including tractors.POWERspec brake pads have edge chamfers that reduce noise but do not reduce service life, uncoated, minimal scattering required. The pads have a noise reducing washer on the back of the pad. Notes on Defender brake parts: All brake pads offered for the Defender have an R90 designation and are therefore registration-free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation.   1. LOF brake pad mounting kit for : Defender 90/110/130 front axle (MY1994-2016)  What is included in the kit? 4x LOF 50V brake pads (ROAD/POWER) 1x STC8575 installation kit 1x LOF Ceratec brake grease 2. LOF brake pad installation kit for : Defender 110/130 rear axle (MY 1998-2016) What is included in the kit? 4x LOF 110 brake pads (ROAD/POWER) 1x 4105 mounting kit 1x LOF Ceratec brake grease 3. LOF brake pad mounting kit for : Defender 90 rear axle (MY 1994-2016) What is included in the kit? 4x LOF 90 brake pads (ROAD/POWER) 1x STC8574 mounting kit 1x LOF Ceratec brake grease    

Product number: DEF-90-REAR-POWERPADM
Weight: 2,6 kg
Parcel shipping
This article is available in different versions

Regular price: From €69.00

Prices incl. VAT;

Defender heritage headlight plates silver

Silver Heritage Headlight plates in aluminium, powder coated

Headlight surrounds Heritage Style aluminium Heritage Style - silver Matching to our silver Heritage grille: Silver headlight plates with inlets and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, silver powder coated Select the colour of the headlight rings. 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130. You can find the heritage-style headlight surround in black here.

Product number: SUHTAL-S-SM
Weight: 0,5 kg
Parcel shipping
This article is available in different versions

Regular price: €269.00

Prices incl. VAT;

Mounting material for 2 pieces Koni / RAID shock absorbers below

Mounting material for 2 pieces Koni / RAID shock absorbers below

Mounting material for 2 pieces KONI/ TREKFINDER Heavy Track RAID  shock absorber 90-5375SP1 + 90-5471 below Mounting material for the pin fastening of the shock absorber - suitable for LAND ROVER Defender models up to approx. 2001 ( no pot mounting ) Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces self-locking nut

Product number: SLSKH
Weight: 1,0 kg
Parcel shipping

Delivery time 5-10 working days

Regular price: €59.00

Prices incl. VAT;

ServiceKit Land Rover Defender 300Tdi

ServiceKit Land Rover Defender 300Tdi

ServiceKit Land Rover Defender 300Tdi Set contains branded filters in original equipment quality.For comparison, we have added the matching Land Rover part numbers.1x Air filter (ESR2623)1x Oil filter (ERR3340)1x Fuel filter (diesel) (AEU2147L)1x Oil pan gasket (UAM2847L)

Product number: SKT300
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €53.00

Prices incl. VAT;

Dirt D-Fenders

Dirt D-Fender Wheel Arch Extensions for Land Rover Defender

Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish. 

Product number: NADD-08M
Weight: 0,5 kg
Parcel shipping
This article is available in different versions

Regular price: €99.00

Prices incl. VAT;

Autoterm Planar 2 D complete set for Land Rover Defender TD5/TDi with PU5 control unit

Parking heater AUTOTERM (Planar) 2D 12 Volt complete set for Land Rover Defender

Accessorie (optional): Simple Contro control element with rotary control (formerly PU-5) Front panel cutouts of the heating console: Planar, 2x Double-USB Vehicle model: Land Rover Defender Td4

Complete set of AUTOTERM Air 2D parking heater for Defender The parking heater set AUTOTERM (Planar) 2D12 for the Land Rover Defender consists of all important components needed for the installation of a parking heater. Included in the delivery are the AUTOTERM 2D 12 Volt parking heater, our Nakatanenga parking heater console, the Nakatanenga mounting plate, a fuel tank extraction, a Webasto air outlet with 60 mm connection, 30 cm warm air pipe and a vibration damper.As a low-priced and powerful alternative to our Webasto parking heater kits, the AUTOTERM (=Planar) 2D parking heater is proving to be a real sales hit. This is partly due to the particularly compact dimensions, which allow installation even in small cars, vans, off-roader motorhomes, construction machinery, boats or in difficult installation situations. In the off-road / 4x4 sector, it is ideally suited for the "typical" off-road vehicles such as Land Rover Defender, Mercedes G or Jeep Wrangler JK.These are only a few of many reasons why we now offer the AUTOTERM (Planar) 2D 12 V parking heater in a clear and comprehensive complete set for the Land Rover Defender at an economical price. For both the Tdi/ Td5 and the Td4, we offer one set each with a perfectly matching accessory kit.You can select different front panel cut-outs for the parking heater console included in the scope of delivery. The associated connections are available in the classic cigarette lighter format (12 V) or as 5 V USB charging sockets for Apple iPhones, navigation devices, iPads and smartphones and are included in the scope of delivery.The parking heater can also be operated while driving.Running time: The AUTOTERM parking heater switches off automatically after 2 hours of operation. However, as soon as you press a button during operation, the parking heater continues to run indefinitely until it is switched off manually.Scope of delivery:- AUTOTERM 2D parking heater 12 volt incl. silencer, intake air hose, heat protection hose, tank intake pipe and corrugated exhaust pipe.- Optionally analogue control unit simple control (PU-5) with rotary control or digital control unit comfort control (PU-29) with time switch- Nakatanenga parking heater console incl. the selected connections- Nakatanenga mounting plate- Fuel filler cap- Webasto air outlet with 60 mm connection, rotatable- 30 cm warm air pipe (diameter: 60 mm)- Vibration damper- Fixing material (screws, nuts, clamps, shrink hose, cable ties)Technical data:- Fuel type: diesel- Heating capacity: max. 1.8 kW, min. 0.8 kW- Volume of heated air: max. 75 m³/h, min. 34 m³/h- Fuel consumption in operation: max. 0.24 l/h, min. 0.1 l/h- Power consumption in operation: max. 29 W, min. 10 W- Weight: 3 kg (independent heater)- Manual start/stop → On the Autoterm.cz site you will find a calculator for the correct dimensioning of the air heater,You can choose between two control elements:- Simple Control (PU-5) element with rotary control: The old PU-10 control element had a relatively inaccessible control surface. Therefore, the reliable control element with rotary control is now the new improved standard of the Planar parking heaters! With the rotary control, you can adjust the heating power of the parking heater and regulate the power of the ventilation in ventilation mode! The PU-5 control element with rotary control can also be purchased separately here.- The digital control element comfort control (PU-29) with timer has an OLED display and an understandable and clear interface.  Temperature, ventilation and power can be configured via the display and the various buttons. With the timer, you can easily set the start of the parking heater to a specific time. The digital control element with timer can also be purchased separately here.Setting options comfort control (PU-29):- Temperature and power (adjustable for the parking heater, the control panel and for an external heater).- Time and date - Operating language (English or Russian)Functions of the timer comfort control (PU-29):- Memory function: save the time so that the parking heater starts at this time every day - Configurable memory locations: Up to 3 different weekdays with different times can be set and saved. The AUTOTERM (=Planar) 2D12 is equipped with an altitude kit.This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content drops. The maximum heat output decreases proportionally to the amount of oxygen in the air. Roughly speaking, from 2,000 metres the loss of output per 500 m altitude is approx. 5%. Manufacturer tests up to 3,440 m were trouble-free. Up to 4,000 m no difficulties are to be expected. Up to 5,000 m the software calculates itself - but this could not yet be tested at real altitude. Important:Especially when used at high altitude, the free travel of the fan is extremely important!Route the combustion air intake and exhaust extremely short and with low resistance - i.e. no kinks, no blockage or reduction. It should also be noted that operation beyond 3,000 m is still a technical compromise. Again, care should be taken to ensure that the combustion chamber is properly heated on a regular basis. The chamber must be burnt free of soot deposits. Soot deposits can also form on heaters that are permanently operated at the lowest setting. Therefore, the following still applies: No guarantee for sooty combustion chambers!In order to ensure the longevity of the heater, you should also free-burn it occasionally at low levels. The combustion chamber reaches full temperature after running at full load for about half an hour. Normally, no further maintenance is required. In case of extreme loads, e.g. during longer overnight stays at more than 4,000 m, the combustion chamber including the seal set should be cleaned if necessary. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Product number: DEF2D12-TD4-PUU
Weight: 15,0 kg
Parcel shipping

Delivery time 10-15 working days

Variants from €863.00
Regular price: €929.00

Prices incl. VAT;

High Performance Manifold Land Rover Defender / DiscoveryTd5

High Performance Exhaust Manifold for Land Rover Defender / Discovery Td5

Fan manifold Land Rover Td5 incl. high-strength manifold bolt M8 and gaskets For all Land Rover Defender / Discovery Td5 Engineered for high performance or modified vehicles. This prevents bent manifolds or broken bolts. The package includes heavy duty bolts and seals. This is motorsport equipment and NOT street legal !

Product number: FCHKRTD5
Weight: 6,0 kg
Parcel shipping

Delivery time 15-20 working days

Regular price: €999.00

Prices incl. VAT;

Rubber mounting for 1 piece Koni / RAID shock absorber top

Rubber mount for 1 piece Koni / Trekfinder RAID shock absorber top

Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece

Product number: 1523-340500
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €25.00

Prices incl. VAT;

wind deflector Defender

CargoBear Wind Deflector for Defender-CargoBear - SLIDE

Wind deflector - suitable for Nakatanenga CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element Material: Aluminium, black matt powder-coated RAL 9005 incl. fixing material the wind deflector extends the CargoBear by 10 cm. lightbars or headlights can be mounted on the wind deflector. suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.  

Product number: CGB2-DEF-WINDSCHRAEG
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €130.00

Prices incl. VAT;

Black Mesh" upholstery set for Land Rover Defender TD5

Black Mesh" upholstery set for Land Rover Defender TD5

Black Mesh" upholstery kit for Land Rover Defender Included in delivery are all foam moulded parts, covers for seat and headrest, required fixing material and upholstery spray adhesive. Suitable for all front seats up to 2007 for Land Rover Defender TD5 (NOT suitable for TD4!!)

Product number: RTRBLKMESH
Weight: 5,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €212.00

Prices incl. VAT;

HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front left (blue-red)

HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front left (blue-red)

Maximum load capacity - optimum handling This Heavy Duty spring was specially developed for the Land Rover Defender 90, 110 and 130 and offers a noticeable improvement with high payloads, trailer operation or demanding off-road use. Whether on the construction site, off-road or when overlanding - with this reinforced spring, your Defender stays reliably on track. Color code: blue/red Price per piece

Product number: FHD-VL
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €89.00

Prices incl. VAT;

Valuables compartment, lockable

Nakatanenga Valuables Case - cubby box raise

Nakatanenga Valuables Case - cubby box raise Nakatanenga valuables case and cubby box raiser for all Land Rover Defender 90/110/130 (all MY), mounted beneath the cubby box / centre console, with hidden lock, optinally with switches, 12 V and USB sockets. Provides additional storage space for all the odds and ends, like sun glasses, mobile phones, purses or other valuables. As it is mounted underneath the cubby box and features a hidden lock, this storage safe is hard to notice and thus gives additional security. Other such cases often only offer space for a few documents, while our safe is large enough to hold items of larger size, cameras, mobile, navigation devices, money, glasses, etc. Usable interior space 43x26x14 cm. In this is the new and improved version of our popular CUSADE the sockets have been replaced by waterproof heavy-duty items. You can optionally have double-sockets (for USB-A and USB-C) to allow for more than one device to be connected simultaneously, or have three 20 A rocker switches pre-installed to operate in-car electronic devices such as air supply, fride, LED worklights etc. The different front panels are available individually, so that you can change your configuraiton at a later time. When using the suitable twist-lock plugs, the 12 V sockets securely lock the plug in place, which is an additional advantage e.g. in severe off-road conditions. In vehicles with interior bulkhead the case can only be opened a few centimetres as the cubby box will then foul the bulkhead. This case can still be used for shallow items. Comes with two keys (which can be reordered).

Product number: CUSADE2-BBM
Weight: 7,1 kg
Parcel shipping
This article is available in different versions

Regular price: From €309.00

Prices incl. VAT;

Defender 110 side storage box, black

Outboard Storage for Landrover Defender and more

Defender 110 side storage box When you go on big adventures, every bit of storage space is useful, which means that not a single centimeter should be wasted.Our storage box makes ideal use of dead space. Made entirely of stainless steel and powder-coated in black, the storage box is waterproof, lockable and the ideal container for salvage materials, rubber boots or tools. The box fits perfectly for the sides of the Land Rover Defender 110 (2-door), but also for e.g. a motorhome, long-distance vehicle or other expedition vehicles.The open flap is held at a 90-degree angle by two thin steel cables and thus serves as a storage surface for water canisters, for example, or even as a small breakfast table. Supplied complete with 2 keys and all fixing materials.Internal dimensions of the side storage box: 465 mm x 285 mm x 335 mmPlease note:This side storage box can only be installed in front of the rear wheel arch in hardtop versions.  Merkblatt Edelstahl und Rost

Product number: SF-HT-DE-PB
Weight: 13,0 kg
Parcel shipping
Expected to be available again in the second quarter of 2026

Regular price: €645.00

Prices incl. VAT;

Mirror arm, adjustable

Mirror arms foldable for Land Rover Defender until BJ2016

Adjustable mirror arms Thanks to their unique fastening mechanism, nothing flutters, even at high speeds. The real highlight, however, is the mirror's folding function. Simply open the Torx screw, fold the mirror down by 90° and the field of vision to the rear is extended many times over.Especially for vehicles with a living cabin or when driving with a trailer, these mirror arms offer real added value! There is no need to attach mirror extensions.Product features: unique mirror flip mechanism precisely manufactured from high-strength aluminium corrosion & UV resistant coating also fit the original Land Rover Defender hinges set includes two pieces Length approx. 19cm Note: When using these mirror arms, the use of a mirror heater is not necessary.

Product number: SPIARM
Weight: 2,0 kg
Parcel shipping

Delivery time 5-10 working days

Regular price: €399.00

Prices incl. VAT;

EBC Greenstuff 6000 Brake Pads

EBC Greenstuff 6000 Brake Pads for 4x4 and SUV

EBC Greenstuff 6000 brake pads EBC Greenstuff 6000 brake pads have been designed for heavy off-road vehicles and SUV that need to be stopped fast and efficiently both on and off the road. The Greenstuff pad is tried and tested and is proven to stop your car approx 20 feet (9 metres) quicker than standard Pads from 60mph which is a an impressive braking improvement of 15% offering better brake effect up to 600°C (1100°F) with almost no brake fading. The Greenstuff pads will work better at higher temperatures than standard pads giving you confidence for spirited street driving and perform well on cars under 200 bhp. Features: Capable of repeated heavy brake use without brake “Fall-Off”. Very minimal disc/rotor damage characteristics. ECE R 90 type approved for most cars. Features red “brake in’ surface coating for instant safe braking after install. The brake pads are supplied in pairs, i.e. as a full set for one axle. The pads can be supplied for a large variety of vehicles. Please choose your desired vehicle:

Product number: NADP6-1033M
Weight: 3,1 kg
Parcel shipping
This article is available in different versions

Regular price: €135.00

Prices incl. VAT;

Rear bumper Defender 110

Land Rover Rear Bumper / Trailer Jack / Rear Step for Defender 110

Land Rover rear bumper / trailer hitch / rear step for Defender 110 With E-mark, for mounting a ball head, E-set and ball head not included, compatible with Nakatanenga spare wheel carrier. Suitable for Land Rover Defender 110 from MY 1998-2016 (TD5 and TD4)

Product number: STC50301
Weight: 27,0 kg
Parcel shipping

Delivery time 10-15 working days

Regular price: €1,190.00

Prices incl. VAT;

Defender Windscreen Washer Nozzle

Windscreen Washer Nozzle for Land Rover Defender

Windscreen Washer Nozzle for Land Rover Defender The windscreen wipers of the Land Rover Defender 90/110/130 do not have an easy job with dried insect remains after long motorway journeys or mud after off-road use. This is where the windscreen wiper nozzles come to the rescue - they are attached to the arms of the wipers and ensure optimum cleaning results.

Product number: NAWWDDEF
Weight: 1,1 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €49.00

Prices incl. VAT;

Raised air intake SN4

Raised Air Intake SN4 for Land Rover Defender Td4, passenger side, with modified air filter housing.

Snorkel for Land Rover Defender Td4 Raised Air Intake SN4 for Land Rover Defender Td4, passenger side, with modified air filter housing. Raised air intake with conversion kit for air filter housing and heating, straightening of air intake passage (best used with our K&N filter!), for Land Rover Defender Td4 2.4 und 2.2, mounted on the passenger side. Material: aluminium, black powder coatedComes with cyclonic top and stainless steel fittings for air intake. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.

Product number: SN4DEAL-LHDM
Weight: 7,0 kg
Parcel shipping
This article is available in different versions

Regular price: €749.00

Prices incl. VAT;

Seat console for sports seats in the Defender

Nakatanenga seat console for sports seats

Nakatanenga Seat Bracket for Sports Seats Mounting bracket, non-folding, for sports seats, for Land Rover Defender 90/110/130, for seats with 405 mm seat rail distance, is attached to the original mounting points. Material: stainless steel, ceramic-blasted, optionally with additional black powder coating. The bracket is at the same time a seat rail extension by approx. 35mm, a combination with our seat rail extensions does not make sense (although technically feasible). The height of the console is 31 mm at the front and 61 mm at the rear.

Product number: SKODEF-VAM
Weight: 3,0 kg
Parcel shipping
This article is available in different versions

Regular price: From €79.00

Prices incl. VAT;

HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front right (yellow-white)

HD Springs for Land Rover Defender 90/110/130, DI/II and RRC front right (yellow-white)

Maximum load capacity - optimum handling This Heavy Duty spring was specially developed for the Land Rover Defender 90, 110 and 130 and offers a noticeable improvement with high payloads, trailer operation or demanding off-road use. Whether on the construction site, off-road or when overlanding - with this reinforced spring, your Defender stays reliably on track. Color code: white/yellow Price per piece

Product number: FHD-VR
Weight: 6,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

Regular price: €89.00

Prices incl. VAT;

Underride protection aluminium for Defender

Nakatanenga underride protection for Land Rover Defender, 10mm aluminium

Nakatanenga underride protection for Land Rover Defender, 10mm aluminium Underride protection, 10 mm aluminium, galvanically anodised and optionally black powder-coated, side parts 8 mm, steel, galvanised and black passivated, with two integrated heavy duty recovery eyes.The underride guard is attached to the original mounting points using the original vehicle bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. Please note: The underride guard is ONLY suitable for left-hand drive vehicles!

Product number: UFSDEAL10B-ELM
Weight: 13,0 kg
Parcel shipping
This article is available in different versions

Regular price: From €469.00

Prices incl. VAT;

Screw Mounting Bracket Injector for Defender TD4 2.2

Screw retaining bracket injection nozzle Defender TD4 2.2 or TD4 2.4

Mounting screw suitable for mounting bracket injection nozzle - Defender TD4 2.2 and 2.4 here in the store Dimensions: 8cm x 2cm x 2cm

Product number: LR029962M
Weight: 0,1 kg
Parcel shipping
This article is available in different versions

Regular price: From €6.00

Prices incl. VAT;

Land Rover Defender Zubehör, Discovery und Range Rover Classic Zubehör

Der Defender hat eine Seele, sagen viele. Vielleicht stimmt das, denn manchmal hat man wirklich diesen Eindruck. Er bringt einen überall hin, auch dorthin, wo andere längst aufgeben. Dafür braucht er Zuwendung, Werkzeug und Geduld. Er ruckelt, macht Geräusche und nimmt es mit Perfektion nicht so genau. Aber wer ihn kennt, weiß: genau das ist sein Charme. Es gibt kaum etwas Schöneres, als an diesem Stück britischer Ingenieurskunst selbst zu schrauben oder, wenn's mit dem Schrauben hapert, wenigstens mit Fachwissen zu glänzen.

Für alle, die lieber selber schrauben oder montieren lassen, bietet der Nakatanenga-Shop eine Schatzkiste voller Defender-Zubehör und Defender-Ersatzteile. Hier findet sich alles, was den alten Briten wieder auf Vordermann bringt oder ihn zum echten Reisefahrzeug macht.

Von Stoßstange bis Schnorchel - das richtige Defender Zubehör für unterwegs

Wer einen Defender in ein Reisefahrzeug umbauen möchte, der braucht mehr als gute Laune und einen vollen Tank. Eine Seilwindenstoßstange, nicht, weil man sich selbst festgefahren hätte, nein, natürlich nur, um die anderen rauszuziehen. Wir empfehlen unsere Nakatanenga Seilwinden-Stoßstange für den Defender wahlweise im Bundle mit Seilwinden von Horntools oder Superwinch, optional mit oder ohne Fernscheinwerfer.

Aber es gibt auch Momente, da hilft kein Gebet, nur eine gute Bergung. Mit Bergeösen, Hecktraversen-Verstärkungen und Bergeboards bleibt man auch dann souverän, wenn der Boden meint, ein Abenteuer draus machen zu müssen. Alles robust, erprobt und bereit für den Ernstfall.

Wer längere Strecken abseits der Zivilisation plant, rüstet am besten gleich mit einem Zusatztank in 56 Liter oder 66 Liter auf, während der Defender-Unterfahrschutz dafür sorgt, dass spitze Steine, Wurzeln oder neugierige Felsen keine bleibenden Erinnerungen hinterlassen. Rockslider schützen die Flanken. Findet ihr alles bei uns in der Unterkategorie Schutz.

Der Schnorchel für den Defender bzw. die erhöhte Luftansaugung ist natürlich Pflicht für alle, die in die Wüste wollen oder durchs Wasser müssen, wobei auch Hamburger Pfützen manchmal verdächtig tief aussehen können. Gibt es für Td4, Td5 und Tdi in verschiedenen Ausführungen für Defender mit oder ohne Überrollkäfig.

Defender-Fahrwerk, Felgen und Reifen

Kein Abenteuer ohne ordentliches Fahrwerk. Ein Defender-Fahrwerk ist keine reine Geschmacksfrage, sondern hängt davon ab, wofür der Wagen eingesetzt wird. Egal ob 90er, 110er oder 130er: Es gibt Fahrwerke für jeden Zweck, vom Familien-Daily-Driver bis zum voll beladenen Fernreisemobil. Für den richtigen Offroad-Look gesellen sich dazu beispielsweise Stahlfelgen wie unsere klassische ANR-Felge, die Wolf-Felge oder ebenso robuste Dotz Dakar.

Und wer keine Lust auf die Suche nach einer Werkstatt hat, die Defender-Reifen vernünftig wuchten kann, nimmt gleich komplett montierte Reifen. Alles zum Thema Reifen und Felgen findet ihr hier.

Innenleben mit Charakter - Sportsitze für den Defender

Wer Kilometer frisst, sollte bequem sitzen. Mit neuen Sitz-Polsterungen lässt sich der alte Charme der Defender-Sitze bewahren, Sportsitze für den Defender bringen modernen Halt ins Abenteuer, und passende Sitzbezüge schonen das Material oder verstecken die Spuren vergangener Expeditionen. Richtig klassisch wird es dann mit den passenden Lenkrädern für den Defender.

Und dann gibt's da noch das Defender-Zubehör, von dem man sich fragt, warum Land Rover das nicht einfach schon von Werk aus eingebaut hat. Türgriffe aus Leder, ein Handschuhfach, ein Haltegriff an der A-Säule, damit der Einstieg selbst nicht jedes Mal wie eine kleine Expedition wirkt.

Sitzschienenverlängerungen, weil britische Ingenieure offenbar keine langen Beine kannten. Eine zweifarbige Innenraumleuchte, ein Ablagefach hinter der Cubbybox und natürlich der Hecktürdämpfer, der verhindert, dass einem die Tür ins Kreuz fällt, wenn der Wagen schräg steht.

Doppelbatterie-System, Elektrik und Licht - Strom, wo er gebraucht wird

Egal, ob Standheizung, Laptop, Kühlbox oder Handy: Auf Reisen braucht man Strom. Deshalb ist eine der ersten Umbauten, die ein Defender bekommt, oft ein Doppelbatterie-System. Unser Doppelbatterie-System für den Defender mit Edelstahlhalterung bietet Platz für zwei Banner 80Ah-Batterien, beinhaltet den Kabelsatz und ein Trennrelais auf Wunsch gibt es einen Batterie-Monitor dazu. Perfekt dazu passt das Solarpanel auf der Motorhaube passend für Td5 und Td4.

Im Bereich Beleuchtung reicht das Spektrum 7-Zoll-Scheinwerfern, LED-Signalleuchten bis zu Lightbars von Osram und Vision-X, dazu gibt es sogar noch einen passenden Lampenbügel. Rückfahrscheinwerfer, Innenraumleuchten und passende oder eine Kennzeichenbeleuchtung mit Kamera sind ebenfalls Teil des Sortiments.

Dachträger für den Defender, Boxen und Ordnung im Chaos

Der CargoBear-Dachträger für den Defender ist fast zu schön, um ihn nur mit Ausrüstung zu beladen. Flach, begehbar, mit Durchzügen und wie gemacht für unsere Roof-Lodge-Dachzelte, befestigt über ein Schnellmontagesystem, das auch für verschiedene andere Dachzelte passt. Perfektes Zubehör für den Defender-Dachträger sind unsere Outdoor-Dusche, die Nakatanenga Shower Tube, und die Roof Lodge Evolution 2 Markisen. Oben auf den Dachträger passen die Nakatanenga Transportboxen und die große Alubox mit 198 Litern Volumen, genügend Platz für Tisch, Stühle und noch das eine oder andere „das-könnte-man-brauchen"-Teil.

Für alle, die noch mehr Stauraum brauchen, gibt's die unauffällige Kotflügelbox, Seitenstauboxen, das Wertsachenfach als Cubbybox-Erhöhung oder das Staufach im Fußraum. Der Tailgate Organizer mit MOLLE-Taschen schafft Ordnung am Heck, das Cargonetz unter dem Dachhimmel nutzt jeden Zentimeter, und die Fenstergitter mit MOLLE-System erweitern den Stauraum an den Seiten- und Heckfenstern.

Standheizung für den Defender

Eine Standheizung macht den Defender zum Winterreise-Fahrzeug, besonders elegant integriert mit der Cubbybox-Erhöhung. Wer noch warm duschen will, ergänzt das Ganze um ein Warmduscher-Kit. Alternativ wärmt die mobile Standheizung in der Alukiste auch das Dachzelt oder im Zweifel den Gartenpavillon.

Pflege, Wartung und Defender-Ersatzteile

Nach der Reise ist vor der Reise. Bremsen, Auspuff, Kardanwellen, wer weiß, wo der Dreck sitzt, weiß auch, wo geschmiert werden muss. In unserem Sortiment haben wir alle wichtigen Defender-Ersatzteile, von Radlagern, Luftfiltern über Auspuff, Getriebe bis hin zu ganzen Karosserieteilen wie komplett verzinkte Rahmen für Defender und Discovery. Ob kleiner Service oder große Restaurierung, alles, was der Land Rover Defender an Zubehör braucht, gibt's hier. Übrigens passen viele der Defender-Ersatzteile auch auf den Discovery I und II und auf den Range Rover Classic. Im Zweifel einfach bei unserer Service-Hotline nachfragen.

Und wer lieber Profis ranlässt, kann sich auf die hauseigene Werkstatt verlassen: spezialisiert auf Defender, mit Einbauten von Zusatztank oder Standheizung über Doppelbatterie-System bis zur Differenzialsperre. Wir übernehmen aber auch komplette Restaurationsprojekte und die Überholung von Defender-Getriebe oder Motor.

Nakatanenga - der Online-Shop für Defender-Zubehör und Defender-Ersatzteile

Der Defender ist kein Auto für Perfektionisten. Er ist ein rollendes Abenteuer, ein fahrbares Bastelprojekt und ein bisschen Wahnsinn auf Rädern, das richtige Defender-Zubehör und die passenden Defender-Ersatzteilen vorausgesetzt. Aber dafür bekommt man etwas, das kein modernes SUV bieten kann: ehrliche Mechanik, echte Geschichten und das gute Gefühl, dass man notfalls selbst alles wieder zum Laufen bringen kann.

  • Alles für den Umbau, die Reparatur oder die Restauration des Defenders: Bei Nakatanenga gibt's Defender-Ersatzteile, Karosserieteile und Zubehör, das passt: von praktisch bis außergewöhnlich.
  • Keine Lust selber am Defender zu schrauben? Einfach anrufen und Werkstatt-Termin vereinbaren. Wir haben uns auf das britische Kultfahrzeug spezialisiert. Vom einfachen Reifenwechsel bis hin zur kompletten Defender-Restauration ist alles möglich.
  • Dachträger für den Defender gesucht? Einer, der nur wenig aufbaut und dabei richtig gut aussieht? Wir sagen: Unser CargoBear kann's.