Pickups

Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery. Technical data: Transmission 3-stage planetary gear max. Tractive force 4300 kg max. Pulling speed 15 m/min* Motor power 3.8 hp Engine type Series Wound** Reduction ratio 110:1 Max. Power consumption 530 amps Voltage 12 V Rope (∅ x length) 10 mm x 30 m Drum (∅ x length) 63 x 223 mm Overall size (LxWxH) 574 x 160 x 225 mm Weight of cable winch 29.1 kg Weight of installation set 13.6 kg Total weight 42.7 kg Installation time 5 hours Features: Motor IP67 sealed by groove with sealing ring Freewheel lever Stainless steel cross braces Reinforced cable drum Powder-coated aluminium die-cast housing Motor/gearbox Internal drum brake with 3 brake shoes Removable control unit (so that the control unit can be installed as required) Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.

ExRoof cargo bed support - suitable for roll cover systems With the ExRoof platform for the cargo bed, you can create additional storage space in your pickup and get the most out of your cargo bed. The cargo bed support has been specially developed for cargo beds with roller blinds. The feet are mounted on the C-rail. All accessories can be easily attached to the ExRoof cross profiles using slot nuts, such as awning brackets, eyebolts for lashing straps, quick-release roof tent fasteners, brackets for sand sheets and much more. The carrier offers sufficient space for a roof tent or transport boxes. The total height is 29 cm. The maximum permitted load depends on the permitted load capacity of the roll cover. With the Mountain Top, for example, a maximum of 75 kg is permitted.   Technical data: Platform dimensions (L x W x H): 1400 x 1350 x 49 mm Total height (feet + platform): 290 mm Platform material: aluminium (powder-coated) Feet material: steel (S235 JR, powder-coated) Colour: black Total weight: 24 kg Compatibility: Horizontal T-slots required on both sides of the cargo bed Distance between the T-slots: minimum 1000 mm, maximum 1360 mm Check insertion of the T-bolts supplied (see technical drawing) Note risk of collision with any existing cabin-side styling bars Scope of delivery: 1 x ExRoof platform 4 x mounting feet for cargo bed (on C-rail) Mounting material Installation instructions

Ideal carrier system for off-road use and for tradesmen Off-road use with the Ford Ranger requires particularly stable mounts, as the vehicle is exposed to higher forces. We have built the platform for the Ford Ranger / Raptor with this in mind. You have sufficient space and fastening options for attaching load securing devices or bolting on practical roof rack accessories. Heavy loads on the roof of the Ford Ranger can therefore be positioned anywhere on the roof rack platform and securely lashed down. Both across the roof and in the direction of travel. Roof rack uses the original attachment points, no drilling required Compatible with Ford Ranger (XL, XLT and Tremor from 2023), Ford Ranger Raptor (from 2023) and VW Amarok (Entry, Style and Life from 2023) Aerodynamic deflector is included in the scope of delivery ExRoof roof rack for Ford Ranger & Raptor (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Ford Ranger / Raptor is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   This Ford Ranger roof rack is also very popular with tradesmen. If the loading area of the pick-up is no longer sufficient for tools or other transport items, toolboxes or ladders can be safely stowed on the platform.   Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

ExRoof roof rack for Isuzu D-Max 2021 Double Cab (from year of construction 2021)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.  

Off-road protection in aluminium: LAPIS rock sliders for Ford Ranger from 2023 onwards Robust aluminum construction:Lightweight yet extremely resistant to impacts and external influences Effective cab protection:Protects the underside of the vehicle from damage caused by stones, branches or other off-road obstacles Simple installation:Fitting to the original attachment points enable uncomplicated installation without complex adjustments such as drilling holes Easier access:Provides additional step surface for driver and passenger Weatherproof:High-quality powder coating for long-term protection against corrosion and environmental influences TÜV parts certificate included in the scope of delivery The popular running boards for the new Ford Ranger from model year 2023 are here: Robust Rockslider design made of aluminum, the front panel is reinforced with “dimple die” beading. The steps can be unscrewed or replaced if necessary. They are fitted to the vehicle using the existing threaded inserts on the underside of the bodywork.   The decision was made to use a lightweight construction, which is why the Rockslider is a functional cabin guard made of aluminum. It is not suitable for a jack, but provides more than adequate protection in moderately difficult terrain.   The running boards are compatible with the following models from model year 2023: Ford Ranger XL Ford Ranger XLT Ford Ranger Wildtrak Ford Ranger Wildtrak X Technical details: Weight: 35 kg (per pair) Material: Aluminum Color: Black (powder-coated) Scope of delivery: 2 x Rockslider (driver's side & passenger's side) mounting material installation instructions TÜV parts certificate

LEDriving® headlight for VW Amarok The replacement of VW Amarok OEM halogen headlights by LEDriving® headlights for VW Amarok is fully ECE compliant. The product bears the ECE test mark for components requiring approval on motor vehicles. The LEDriving® headlamps are approved according to R6, R7, R48, R87 and R112 and may therefore be installed and operated in Europe. The LEDriving® headlamp can be installed in accordance with ECE R48 without automatic headlamp leveling and additional headlamp cleaning system, as the target luminous flux of the low beam does not exceed 2000 lumens. The headlamp is therefore registration free. This does not include individual custom requirements of countries, in addition to the standardized ECE certification of the product. Note: The LEDriving® headlights were developed for European VW Amarok models. This means that local manufacturer model adjustments may have an impact on the functionality of LEDriving® fixtures. Product advantages: • OSRAM LED dipped and high beam, LED daytime running lights and LED position lights, dynamic LED turn signals• Pixel-free optics thanks to state-of-the-art optical fiber technology• Up to 200% * more light• Up to 200 m long cone of light• Up to 100% ** whiter light• No additional headlamp leveling or additional headlamp cleaning system necessary• Easy plug & play installation without modification or damage to existing cables• No additional parts required for installation• No additional approval required (ECE certified)• 2 year warranty Application areas: • Upgrade headlight for Volkswagen Amarok• Headlamps suitable for vehicles equipped with halogen headlamps as original equipment• Not suitable for vehicles equipped with xenon headlamps as original equipment Product characteristics: • Full LED headlights with LED daytime running lights, LED position lights & dynamic LED turn signals• Color temperature: up to 6500K• ECE certified• Degree of protection: IP69K * compared to ECE R112 minimum** compared to standard halogen lamp Approval according to ECE R6 / R7 / R48 / R87 / R112

ExRoof roof rack for Ford Ranger Double Cab (year of construction 2016 to 2022)   The ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: - Material: Aluminum 6063 - Weight: 20 kg - Surface: Powder coating - Size: 1600 mm x 1250 mm x 49 mm   Scope of delivery - Base carrier - Roof rack feet - Fastening material and installation instructions   Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg   The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary.   The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

ExRoof roof rack for Mitsubishi L200 (from model year 2016)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

ExRoof roof rack for Volkswagen® Amarok Double Cab (from year of construction 2010 to 2022)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.   The manufacturer responsible for the modifications/conversions is horntools GmbH, not Volkswagen AG. Volkswagen AG accepts no responsibility or liability for any negative effects that may occur as a result of the modifications to the vehicle.    

ExRoof roof rack for Volkswagen Amarok (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any attachments can be attached using sliding blocks. The ExRoof roof rack for the Volkswagen Amarok is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Practical accessories such as eyebolts, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack.   Product highlights Roof rack uses the original mounting points, no drilling required Compatible with Volkswagen Amarok (from model year 2023) Aerodynamic deflector is included in the scope of delivery Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

Aluminium Rock Slider LAPIS - for various vehicles The front panel of this Rockslider is reinforced with "dimple die" beads and the steps can be unscrewed or replaced if necessary.The holes in the Rockslider can, if the running boards are not used, be closed with the screws provided. The connection to the vehicle is via the existing threaded inserts on the underside of the body.For this, the Rockslider is bolted to the body with 6 M10 screws. Delivery: Rockslider left & right mounting hardware 4x tread installation instructions

Robust rock slider design made of aluminium The front plate is reinforced with ‘dimple die’ beading. The steps can be unscrewed or replaced if necessary. If the footboards are not used, the holes in the Rockslider can be sealed with the screws supplied.   The connection to the vehicle is made using the existing threaded inserts on the underside of the body. The Rockslider is bolted to the bodywork with 6 M10 bolts.   Our Rockslider has been issued with a parts certificate by TÜV Süd. We have opted for a lightweight construction, which is why our Rockslider is a functional aluminium cab guard, so it is not suitable for a jack, but it provides more than adequate protection in moderately difficult terrain.   Scope of delivery: Rockslider left & right Mounting material 4x step Installation instructions TÜV certificate and an indescribable look for free Attention: The Rockslider is only suitable for double cabs.    

Raised air intakes for various vehicles in black The snorkel not only allows safe driving through deeper water points with reduced risk for the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, the air filter must be replaced or cleaned less frequently. Available for the following vehicles:Ford Ranger PX (from BJ 2011)Nissan Navara D23 (from year 2015)Nissan Navara D40 / Pathfinder R51 (BJ 2005-2015)Toyota Hilux (BJ 2005-2015)Toyota Hilux (from BJ 2016) Please select the vehicle.

Dotz Dakar Dark This Dotz Dakar Dark rim 16 inch with bolt circle 6 / 139.7 is suitable for Ford Ranger (Type 2AB). Rim size: 7x16" ET: 24 The classic and robust rim is easy to clean with a high-pressure jet.Complete wheelsets are also available at Nakatanenga. Just ask for the desired tires or let us advise you. Contact us by email or phone.

Dotz Dakar6 ET2 7x16 inch ET24 rim   Suitable for Ford Ranger (type 2AB).   Rim size: 7x16" ET 24 The classic and robust rim 16 inch is easy to clean with a high-pressure jet.Complete wheelsets are also available at Nakatanenga. Just ask for the desired tires or let us advise you. Contact us by email or phone.

Roof Accessories for NAVIS PickUp: Spoiler and Rail in Black   Roof rack NAVIS spoiler RAIL & FLAT PickUp roof rail Alu black:The spoiler reduces the wind noise and is suitable for all NAVIS roof racks. Roof rack railing for NAVIS FLAT PickUp roof rail aluminum black:The matching side rail for the roof rack NAVIS FLAT - suitable for all PickUp models.2 pieces (1x left and 1x right)Color: Black

Ventilation panels rear side window JAC T8 Pro  The JAC T8 Pro combines payload capacity with modern features. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection against insects? This is possible with our special ventilation panels with mosquito nets, which are manufactured specifically for the JAC T8 Pro — made of solid aluminium instead of rattling universal parts. The black powder-coated panels, supplied in pairs, ensure a discreet appearance and greater comfort in hot weather or when used as a work vehicle. Installation is straightforward: wind down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Length: 685 mm  

Ventilation panels rear side window Toyota Hilux Double Cab 2005-2015 The Toyota Hilux Double Cab is a workhorse that offers comfort for the crew. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? That's possible with our ventilation panels with mosquito nets, tailor-made for Double Cab models and made of solid aluminum—no rattling universal parts. Supplied in pairs, powder-coated in black, they provide greater comfort during breaks on the construction site or when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 685 mm Length: 685 mm  

Nakatanenga Ventilation Panels Side Windows - Ford Ranger (from 2012 and from model year 2022)  The Ford Ranger is a robust pickup truck that impresses both off-road and in everyday use. With the right ventilation panels, the interior remains well ventilated even at high temperatures, while rainwater, insects, and uninvited guests stay outside. The aluminum, black powder-coated panels are inconspicuous, sturdy, and offer additional comfort for breaks on the road or when working with the vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 660 mm 

Nakatanenga ventilation panels side window - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 Suitable for: Jeep Cherokee XJ (1984-2001) Nissan Navara Double Cab D40 The Jeep Cherokee XJ and Nissan Navara are classics for off-road enthusiasts and individualists. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made of durable aluminum and tailored to fit the Cherokee XJ, make this possible — no comparison to rattling universal solutions. Powder-coated in black and supplied in pairs, they blend discreetly into the classic look and increase comfort on tours and excursions.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 410 mm

Ventilation plates rear side window Toyota Hilux The newer Toyota Hilux models are more modern and powerful, but remain just as robust. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's what our precisely fitting ventilation panels with mosquito nets offer, made from durable aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for work and leisure. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm     

Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.