New arrivals, special offers, inspiration and all sorts of interesting things 

Mobile Camping Kitchen 48 L – Complete Set with Gas Stove, Tableware and Cutlery for 4 People Sound familiar? The cutlery's in a Tupperware box, the stove's shoved in the back left, the mugs are in some crate entirely elsewhere, right next to the tinned soup. And where the hell is the washing-up bowl again? Anyone seen the ladle? And did we even pack the tin opener? Having everything in one place would be nice. But simply throwing it all into one box, only for the first pothole to mix everything up again, doesn't really solve the problem either. That's why our team came up with something: a complete mobile outdoor kitchen for up to four people, neatly and securely packed into a 48-litre Transformer Box. A purpose-designed slot-in system keeps the equipment in place, so opening the box doesn't send half the kitchen tumbling out. Stove, pots, tableware, cutlery and accessories all have their own place and are quickly accessible when needed. The metal parts of the slot-in system are finished in a black, fine-textured powder coating. The robust surface handles everyday camping use well, wipes clean easily and does a good job of hiding fingerprints and the occasional splash of grease. And here's the clever part about the Transformer Box: the kitchen can be accessed from both the top and the front. Remove the lid to use the stove and work surface, or open the front to reach equipment stored lower down – without having to empty half the box first. The whole system sets up in just a few steps. The wooden lid becomes the worktop, and when more space is needed, the two side tables simply slot into place. Suddenly there's room for the stove, tableware, a few ingredients and the collapsible washing-up bowl. The kitchen reaches a comfortable working height when the box sits on top of two more Transformer Boxes (the food has to live somewhere too, right?) or on a tailgate, on a pick-up for example. Inside the Nakatanenga kitchen box is a complete set for up to four people: gas stove with piezo ignition, pot set, windshield and gas cartridge, plates, bowls, mugs and cutlery. Plus all the little things that somehow always get forgotten: tin opener, tea towel and washing-up bowl. In other words, the basic equipment for cooking, eating and cleaning up afterwards is all on board. The Transformer Box itself is moisture-resistant and easy to clean – a clear advantage on longer journeys and particularly in warm or humid regions. And once everyone's full and the last plate has been dried, the whole kitchen goes back where it came from and disappears neatly into the rear of the vehicle. The washing-up, though, it still won't do for anyone. Advantages at a glance complete mobile camping kitchen in a 48-litre Transformer Box slot-in system keeps stove, tableware and accessories organised and securely in place access from both the top and the front – no need to unpack the entire box wooden lid doubles as a worktop, plus two side tables for additional workspace complete set for up to four people gas stove, pot set, tableware, mugs, cutlery and extensive accessories included quick to set up and compact to pack away ideal for 4x4 travel, camping, overlanding, vehicle storage systems and weekend trips moisture-resistant and easy to clean – especially useful in warm and humid regions robust, low-maintenance powder coating that barely shows fingerprints or grease marks What's included 1x Transformer Box, available in black, olive or ivory 1x slot-in system, black powder-coated 1x storage bag for the slot-in system 1x wooden lid 1x collapsible washing-up bowl 1x tea towel 1x 4-piece pot set 1x Primus "Fieldchef" stainless steel kitchen knife (blade length: 12 cm) 2x Coghlans tin openers 1x camping gas stove with piezo ignition 1x aluminium windshield 1x MSF-1a gas cartridge (content: 227 g) 4x melamine plates (diameter: 20.5 cm) 4x melamine bowls (diameter: 16.5 cm) 4x stainless steel mugs (capacity: 450 ml each) 4x 3-piece stainless steel camping cutlery sets (spoon, knife & fork)

VIAIR 400P EF Digital – Portable 12V Compressor with Digital Pressure Preset & Auto-Stop The VIAIR 400P EF Digital is the next evolution of the proven 400P platform for anyone looking to inflate large tyres quickly, accurately and with maximum convenience. It combines the high airflow performance of the 400P series with VIAIR Enhanced Flow Technology, digital pressure control and automatic shut-off once the preset tyre pressure has been reached. This is particularly useful in off-road applications: after airing down the tyres for driving on sand, gravel or rough terrain, simply select the required target pressure before returning to the road. The digital display shows both the current tyre pressure and the selected target pressure at the same time. The compressor then takes care of the inflation process and stops automatically once the preset pressure has been reached – eliminating the need to constantly check the gauge and switch the compressor off manually. The 400P EF Digital is designed for high airflow and fast inflation of high-volume tyres. VIAIR Enhanced Flow Technology optimises airflow, while the redesigned compressor head improves heat dissipation. With an airflow of up to 73.3 l/min at 0 bar, this portable 12V compressor has plenty of performance even for large off-road tyres. The 400P EF Digital is also particularly well equipped for typical off-road use away from paved roads: its 6-stage air filter muffler helps keep dust and debris out of the intake air – an important advantage on dry tracks, gravel roads and in sandy environments. At the same time, airflow remains impressive. VIAIR Enhanced Flow Technology delivers up to 73.3 l/min at 0 bar despite the sophisticated air filtration system. This means the 400P EF Digital combines effective air filtration for demanding off-road conditions with the high airflow required to inflate large-volume off-road tyres quickly. Another major advantage on large 4x4, off-road and overland vehicles is the 7.6 m coiled air hose. Its reach is sufficient on most large off-road vehicles to access all four tyres from a single compressor position. The compressor can therefore remain in one place while all four tyres are inflated one after another, without having to move the unit each time. The clip-and-lock air chuck simply pushes onto the tyre valve for a quick and secure connection – particularly useful when all four tyres need to be brought back up to road pressure after an off-road section. An integrated LED work light provides additional visibility when operating the compressor in the dark. A flashing red warning light mode is also available for roadside emergencies. With IP54 protection, a robust I-Beam base plate and a heavy-duty utility carry bag, the 400P EF Digital is built for demanding mobile use. Features Digital target pressure preset with automatic stop when the selected tyre pressure is reached Digital display showing current tyre pressure and selected target pressure simultaneously VIAIR EF Enhanced Flow Technology with airflow of up to 73.3 l/min – ideal for fast inflation of large off-road tyres Designed for high-volume tyres on 4x4, off-road and overland vehicles Redesigned compressor head for improved heat dissipation 6-stage air filter muffler – particularly useful in dusty off-road conditions Clip-and-lock air chuck for quick and secure connection to the tyre valve 7.6 m coiled air hose – long enough on most large off-road vehicles to reach all four tyres from a single compressor position Integrated LED work light Flashing red warning light mode for roadside and emergency situations Selectable pressure display in BAR, PSI or kPa 2-pin SAE power connection with 40 A inline fuse Robust I-Beam base plate IP54 protection rating Stealth Black finish Heavy-duty utility carry bag VIAIR Reference Inflation Times 315/75 R16: from 0.7 to 2.8 bar in approx. 4 min. 56 sec. 315/85 R16: from 0.7 to 2.8 bar in approx. 5 min. 30 sec. For comparison, the widely used European 4x4 tyre size 265/75 R16 has an overall diameter of only around 31.6 inches. VIAIR's reference measurements therefore relate to considerably larger and higher-volume off-road tyres and provide a practical indication of the tyre sizes the 400P EF Digital is designed to handle. The stated inflation times are based on VIAIR's reference tyre sizes of 35 x 12.5 R15 and 37 x 12.5 R15. For the European market, these have been converted to approximately comparable metric tyre sizes. Actual tyre dimensions and inflation times may vary depending on tyre manufacturer, tyre volume, temperature and operating conditions. Technical Specifications Operating voltage: 12 V Motor: permanent magnet motor Airflow: up to approx. 73.3 l/min at 0 bar Maximum working pressure: approx. 10.3 bar (150 PSI) Duty cycle: 100 % at approx. 2.8 bar (40 PSI) Duty cycle: 30 % at approx. 6.9 bar (100 PSI) Maximum current draw: 30 A Ingress protection rating: IP54 Operating temperature: -40 °C to +70 °C Noise level: 70 dB at 0 bar Dimensions: approx. 31.6 x 17.0 x 19.2 cm Weight: approx. 4.9 kg Power cord length: approx. 1.8 m Air hose length: approx. 7.6 m Scope of Delivery 1 x VIAIR 400P EF Digital compressor 1 x 7.6 m coiled air hose with clip-and-lock air chuck 1 x battery clamp power cable with 2-pin SAE connection and integrated 40 A fuse 3 x inflation adapters 1 x Presta valve adapter 1 x heavy-duty utility carry bag

Heater and Blower Control Unit for Land Rover Defender Td4 When the blower slider stops working: complete control unit as a direct replacement The heater and ventilation controls in the Defender are used regularly over many years – and often not exactly gently. One well-known weak point of the control unit is the slider used to adjust the blower speed. As the vehicle gets older, this slider can become stiff, develop excessive play or fail completely. If the slider is faulty, the desired blower setting – particularly the middle speeds, in our experience – can no longer be selected reliably. This is especially frustrating when the windows are misted up, during winter or in poor weather conditions. With this complete heater and blower control unit, you can replace the faulty unit and restore reliable operation of the heating and ventilation system. The benefits: Complete heater and ventilation control unit Ideal replacement for a faulty or stiff blower speed slider Controls blower speed, temperature and air distribution Direct replacement for the existing control unit Suitable for: Land Rover Defender L316 Defender Td4 2.4: 2007–2011 Defender Td4 2.2: 2012–2016

Durable Nylon Backpack - Original Land Rover Robust, practical and ready for every adventure: the vintage-style “Field Service Kit”, inspired by classic Land Rover design, offers plenty of space for your essential gear.Made from durable nylon and fitted with sturdy webbing straps, the bag is ideal for travel and outdoor use. A two-layer felt LR emblem and two woven patches give it an authentic vintage look.The practical side pocket holds a water bottle, while maps, keys or your mobile phone can be stored securely and kept close at hand in the front pocket.Product Details: Material: 100% Nylon Colour: Khaki Dimensions: approx. 38 × 28 × 14 cm (H × W × D) Capacity: 14.5 litres Side pocket for a water bottle Front pocket for maps, keys or a mobile phone Durable, spacious and versatile  

Rear Tailgate Damper Upgrade for the Land Rover New Defender More comfort, more control, more practicality for everyday use: With the rear tailgate damper upgrade for the Land Rover New Defender, opening the tailgate becomes noticeably smoother and more reliable—whether in everyday use, on trips, or off-road.   Especially on the New Defender, the tailgate is correspondingly heavy due to the spare tire and additional attachments. This can make opening and holding it open cumbersome, particularly when the vehicle isn’t standing perfectly straight. This is exactly where our upgrade comes in: The specially tuned heavy-duty damper supports the tailgate shortly after unlocking and opens it gently and in a controlled manner on its own starting at approximately 3°.   Particularly practical: Even when the vehicle is at a slight angle—as often happens off-road, on uneven surfaces, or on inclines—the tailgate stays reliably open. This gives you convenient access to the cargo area at all times—without having to hold it open, brace it, or worry about it slamming shut.   Another plus is the increased opening angle of just over 90°. This provides more freedom of movement at the rear and makes loading and unloading significantly easier.   Further down, our comparison video clearly illustrates the differences between the original damper and the Nakatanenga upgrade damper.   Installation is a plug-and-play solution and requires no vehicle modifications. Simply swap it out, enjoy the benefits, and make your Defender even more practical for everyday use.   Your benefits at a glance: Noticeably greater comfort when opening the tailgate Automatic, smooth opening starting at approx. 3° Reliable hold-open function even on slight inclines Wider opening angle for better access to the cargo area Robust heavy-duty design Simple plug-and-play installation No modifications to the vehicle required

Handle for Nakatanenga CargoBear roof rack system Do you already have a CargoBear roof rack? Then you have probably used the mounting rail as a handle. This is unpleasant and you can easily hurt yourself - as we know from personal experience.That's why we decided to offer a suitable handle for the Cargobear. In addition to the tried-and-tested CargoBear handle, a version with an adapter plate is available. The individual handle is fitted directly into the grooves of the CargoBear. Depending on the desired position, it is therefore easiest to fit it whilst the roof rack has not yet been fully assembled or fitted. The version featuring the handle with an adapter plate offers significantly greater flexibility: the adapter plate makes it easier to retrofit the handle to a CargoBear that has already been fitted, without having to go to the trouble of dismantling the roof rack. At the same time, the position of the handle can be adjusted later with relative ease if required.   Variants to choose from: Handle including fixing materials Handle including adapter plate and fixing materials The variant with the adapter plate is therefore particularly practical for retrofitting, as well as for anyone who wishes to retain flexibility when positioning the handle. They are very useful for little effort - the handle is easy and quick to install. So easy and so ingenious! Dimensions: Length: 300 mm Height: 66 mm Handle diameter: 28 mm Material: aluminum plastic coated RAL9005 Delivery: 1 pc handle 2 pcs slot nut mounting material -Suitable for all CargoBear 1 + 2 roof racks!

Warm & Stylish – Genuine Land Rover Wool Beanie in Khaki This durable Genuine Land Rover knitted beanie is inspired by traditional Navy Watch Caps and combines a comfortable fit with a high-quality, wool-rich fabric blend. The 50% wool content provides breathable warmth, while the acrylic fibres add shape retention, durability and easy everyday wear. Two woven Land Rover patches pay tribute to the heritage of classic Land Rover models and give the beanie its distinctive look. A practical and stylish choice for cold days, whether outdoors, travelling or simply for everyday wear. Details: wool-rich fabric blend for breathable warmth material: 50% wool, 50% acrylic colour: Khaki two woven Land Rover patches inspired by traditional Navy Watch Caps one size

Genuine Land Rover Baseball Cap – Slate with Interchangeable Patch This Genuine Land Rover baseball cap combines a clean, functional design with one particularly useful detail: the front features a hook-and-loop panel for interchangeable morale patches, allowing the look of the cap to be changed whenever desired. Made from soft, brushed cotton twill in the distinctive Slate colour, the cap offers comfortable everyday wear and robust construction. The adjustable hook-and-loop fastening at the rear provides a flexible fit. A matching Land Rover hook-and-loop patch is included and can be removed or replaced with other compatible morale patches. Product details: Genuine Land Rover baseball cap 5-panel design with a mid-profile fit Material: 100% cotton Colour: Slate hook-and-loop panel for interchangeable morale patches Land Rover hook-and-loop patch included patch removable and interchangeable adjustable hook-and-loop fastening at the rear one size, suitable for most head sizes spot clean only

Flexible securing – the practical tie-down strap set for everyday use, travel and leisure 10% saving compared with individual prices Not every transport task is the same. Sometimes a larger box needs to be firmly secured, while at other times it is enough to quickly fasten a bag, camping equipment or smaller items. This 5-piece tie-down strap set offers a practical combination of two different types of strap for exactly these situations. What makes this set special: quality products Made in Germany for Nakatanenga. The straps are manufactured in Germany using high-quality materials and are designed for long-lasting use – particularly in situations where tie-down straps are not simply kept in the boot for occasional use, but are permanently carried in or on the vehicle. The set includes three 5 m ratchet straps for applications requiring strong and controlled tensioning, as well as two 2 m straps with cam buckles for quickly and easily securing lighter or smaller items. This gives you a versatile selection for a wide range of situations – whether in a van or on an off-road tour, on holiday, while camping or for a trip to the DIY store. Made for outdoor use On off-road and expedition vehicles in particular, tie-down straps are often exposed to the elements for extended periods. Sun and heat in summer, rain and moisture, as well as snow, frost and road salt in winter place high demands on both materials and workmanship. That is why these straps use high-quality, UV-stabilised webbing. It is designed for prolonged outdoor use and is considerably more resistant to the effects of UV radiation and weathering than basic, short-lived low-cost alternatives. A tie-down strap has to work exactly when it is needed. It is particularly frustrating when inferior webbing begins to deteriorate after a relatively short period of outdoor use, or when metal components corrode and a ratchet can no longer be operated reliably. Whether you are off-road, dealing with a breakdown or simply need quick access to your equipment, you should be able to rely on your load securing equipment. Our straps manufactured in Germany are therefore designed for reliable, long-term use under European weather conditions. Two strap types for different tasks The ratchet straps can be tensioned easily and in a controlled manner, making them ideal for securing transport boxes, tools, luggage or other loads that need to remain firmly in place. The shorter straps with cam buckles are particularly useful when speed and flexible fastening are required. Instead of simply having several identical straps in your vehicle, this set gives you a practical selection for different transport and load-securing tasks. The set includes: 3 × ratchet straps one-piece design Width: 25 mm Length: 5 m Tensile strength: 400 daN (equivalent to 400 kg) Material: 100% polyester UV-stabilised webbing Colour: Black / Yellow with ratchet for strong and convenient tensioning 2 × tie-down straps with cam buckle Width: 25 mm Length: 2 m Tensile strength: 400 daN (equivalent to 400 kg) UV-stabilised webbing Material: 100% polyester rust-resistant cam buckle quick and easy to use Your advantages at a glance Made in Germany high-quality materials and clean workmanship UV-stabilised webbing Suitable for a wide range of applications:Off-road vehicles, campers, cars, estates, SUVs, vans and trailers – for camping equipment, luggage, tools, shopping, transport boxes and much more. Five straps, two fastening systems, Made in Germany – high-quality load securing for everything that needs to stay reliably in place while you are on the move. Both types of lashing strap are also available individually from our shop – lashing straps with a clamp buckle or ratchet lashing straps.

Ratchet strap – one-piece, 5 m long and 25 mm wide, black Made in Germany – designed for long-term outdoor use Anyone who travels off-road knows that everything has to stay firmly in place. Toolboxes, camping equipment, canisters and other travel gear are exposed to significantly greater movement on corrugated tracks, potholed routes and steep sections than on normal roads. And that is exactly where you need to be able to rely on your equipment. Our one-piece ratchet strap, measuring 25 mm wide and 5 m long, is manufactured in Germany for Nakatanenga and designed for regular use in vehicles and outdoors. Instead of short-lived low-cost products, you get a high-quality tie-down strap made from carefully selected materials that can also cope with typical European weather conditions. Sun and heat in summer, rain and snow, frost in winter or road salt: tie-down straps that are permanently used outside the vehicle, on a roof rack or on a trailer have to withstand a great deal. The UV-stabilised polyester webbing is therefore designed to provide a high level of resistance to weathering and sunlight. While inferior webbing can become brittle and lose strength after a comparatively short period of continuous UV exposure, this strap is designed for long-term use. Quality also pays off when it comes to the ratchet itself. After all, what use is a tie-down strap if the mechanism corrodes after some time outdoors, becomes stiff or jams exactly when you need it most? Especially when off-road, in the event of a breakdown or when tools and recovery equipment need to be accessed quickly, a strap should open reliably without unnecessary effort. Securely strapped down – off-road and in everyday use The ratchet allows the strap to be tensioned comfortably and your load to be firmly secured in just a few simple steps. With a tensile strength of 400 daN, it provides ample capacity for many typical applications involving off-road vehicles, trailers, roof racks and camping set-ups. But the ratchet strap is also a reliable helper in everyday use – whether for transporting items in the car, on a trailer, during a house move or for securely fastening loads around the home and garden. Whether you are heading off on your next off-road adventure, transporting your camping equipment or simply looking for a dependable tie-down strap for everyday use, this product gives you durable quality made in Germany instead of a disposable product designed for only a few uses. Key details: Made in Germany one-piece ratchet strap Strap width: 25 mm Length: 5 m Tensile strength: 400 daN (equivalent to 400 kg) Material: 100% polyester UV-stabilised webbing Colour: Black designed for regular outdoor use suitable for sun, heat, rain, snow and frost robust, durable construction quick and powerful tensioning thanks to the ratchet mechanism ideal for off-road, travel, camping and transport equipment quality product manufactured in Germany You can make real savings with our lashing strap bundle – five straps, two types of fastening   Strap it down. Tighten it securely. Hit the road. – Made in Germany.