Performance Optimisation and Speed Unlimiter for all Land Rover Td4 2.2
Performance Optimisation and Speed Unlimiter for all Land Rover Td4 2.2 A well-balanced tuning for your Defender Td4 2.2, model year 2012 onwards, which extracts dormant power reserves from the engine without damaging it.In contrast to many others, this tuning does not focus on a maximum increase in power, but instead achieves an engine-friendly and at the same time clearly noticeable increase in horsepower and torque. By reprogramming the ECU, the factory maximum speed / VMax restriction is also completely removed at the same time, allowing the engine to develop its full power spectrum - this is useful for frequent motorway trips, for example.Optionally, the exhaust gas recirculation (EGR) can also be switched off - this improves the engine's pulling power. Please note that the EGR valve must not be dismantled, otherwise error codes will be generated. Our software-based deactivation, on the other hand, does not trigger such codes and can, of course, be retrofitted without leaving a trace - this applies to all tuning measures offered here.The configuration is done according to the customer's wishes - in case of special requirements: Just contact us! Possible configurations are: no power increase, deactivation of exhaust gas recirculation no power increase, deactivation of cruise control no power increase, deactivation of exhaust gas recirculation & deactivation of speed limiter Power increase to 114KW/155PS at 430Nm, incl. deactivation of speed limiter Power increase to 114KW/155PS at 430Nm, incl. cancellation of cruise control and deactivation of exhaust gas recirculation Power increase to 125KW/170PS at 450Nm, incl. suspension of the speed limiter, deactivation of the exhaust gas recirculation and incl. a larger intercooler. The price of the 170HP tuning already includes the larger intercooler. We do not offer it without it, as this would put too much thermal load on the engine.Only for motorsport applications, no road approval!We recommend reinforced silicone hoses & K&N exchange filters for tuning: Order silicone hoses here / Order exchange filters here.The tuning can either be carried out at our premises by appointment or you can send us your engine control unit and receive it back in the shortest possible time with the performance-enhanced programming (and possibly the larger intercooler for self-installation).We offer the following flat rates for the installation of the intercooler: Vehicles without air conditioning Vehicles with air conditioningPlease select the desired tuning variant.After ordering, one of our employees will contact you to arrange an appointment, so please be sure to include your telephone number with your order. Please order in good time, we have approx. 4 weeks lead time for workshop appointments. Assembly is only possible on site in Berg near Neumarkt (postcode: 92348).
Prices incl. VAT;
Screw set for flywheel LR116372
Bolt set for flywheel LR116372 This high-quality bolt set for flywheel LR116372 contains all the fastening bolts required for professional and secure installation. Lieferumfang Set: 8 Stück Schrauben
Prices incl. VAT;
Valve cover gaskets for TD4 and TD5
Valve cover gaskets selectable for different vehicles: Td4 - suitable for 2.4 Diesel from MY 2007 Td4 - suitable for Defender Puma 2.2l TD5 - suitable for Discovery 2, Defender from MY 2004TD5 - suitable for Discovery up to MY 2002
Prices incl. VAT;
Overhauled manual gearbox for Defender TD4 and TD5
Overhauled manual gearbox R380 for Defender TD5 and MT82 for Defender TD4 The R380 manual gearbox, which was installed in 4 revisions from 1998 to 2006 in the 300Tdi and Td5, among others, owes its name to the 380Nm input force for which the gearbox was originally designed. After initial teething troubles in conjunction with the LT230T transfer case and corresponding improvements, the reliable R380 was only replaced when European environmental regulations made it necessary to switch to the Td4 engine with its six-speed gearbox. We offer top-quality reconditioned R380 / MT82 replacement gearboxes for Td5 and Td4. For this item, we charge an additional deposit of 400.00 euros for your current manual gearbox. The deposit will be refunded if you send the old gearbox to us and it is in good enough condition to be overhauled. If you send us your old gearbox, we will refund you the amount of 400.00 euros. However, this is subject to the condition that the housing is in good condition and the gearbox can still be overhauled. Product note: UB-SCHAGE-TD4 reconditioned MT82 manual gearbox for Defender TD4 (MY2007-2016) UB-SCHAGE-TD5 overhauled manual gearbox R380 for Defender TD5 (MY1998-2006)
Prices incl. VAT;
Overhauled LT230 transfer case for Defender TD4 and TD5-Stage1 / Stage2
Replacement gearbox - transfer case, overhauled LT230 for TD4/TD5 Stage1/Stage2 Winchester Gears Stage LT230 are improved versions of the standard Defender and Discovery transfer cases. Common sources of failure have been carefully analysed and effective solutions implemented. Sleeved main housing The bore of the intermediate shaft, which is prone to wear and oil leaks, is machined and fitted with a steel sleeve. In addition, the frequently damaged bearing bore of the main shaft was taken care of by fitting a cylindrical sleeve. Intermediate shaft The intermediate shafts that hold the gear in place often wear out, leading to gear noise and, in later 1.21 gear sets, total gear failure. the high performance shafts fitted are made from 17.4ph material to ensure a long service life. High capacity oil pan Available as an optional extra, this oil pan increases oil capacity by 0.6 litres and helps keep the transfer case cool and well lubricated. Centre differential Stage 1 : Features a heavy-duty one-piece cross shaft that replaces the weaker two-piece design, a common weak point. Stage 2 : Incorporates an Ashcroft ATB Limited Slip Diff, a spiral design that optimises torque and drive distribution between the front and rear axles. This provides improved traction and eliminates the weakness of the standard unlocked centre differential, ideal for racing on low traction surfaces. For this item, we charge an additional deposit of 400.00 euros for your current transfer case. If you send us your old transfer case, we will refund you the amount of 400.00 euros. However, this is subject to the condition that the housing is in good condition and the gearbox can still be overhauled.
Prices incl. VAT;
Exhaust system for Land Rover Defender 110 2.5Tdi as of 1994
Exhaust system for Land Rover Defender 110 2.5Tdi from 1994 onwards Content of the set: Front pipe Middle pipe Rear silencer Exhaust 110 Defender 2.5 Tdi from 1994 - DOPPEL-SS
Prices incl. VAT;
Oil seal crankshaft rear Defender TD4 2.4 and 2.2, for Defender from MY 2007 onwards
Oil seal crankshaft rear Fits DEFENDER 2007 and later.
Prices incl. VAT;
Shift Linkage Repair Kit Transfer Case for Land Rover Defender
Repair kit shift linkage / transfer case The transfer box on a Defender not only transmits the power from the engine two both axles, it also houses the middle diff lock as well as the reduction gearbox. The linkage connecting the transfer box to the low ratio/diff lock stick is naturally prone to heavy wear and tear. The repair kits give you the option to completely replace all worn bushes, bolts and the hexagon screw in the linkage. Nut, washers and SL retaining clips for the bolts are all included. Please note: Repair kit (REPSET-VEGE-LA) is compatible up to chassis-nr. LA999999 (ca. MY1994) Repair kit (REPSET-VEGE-MA) is compatible from chassis-nr. MA000000 (ca. MY1995)
Prices incl. VAT;
Silicone hoses turbocharger and intercooler, for several Land Rover models
High-performance silicone hoses for turbochargers and intercoolers They are suitable for the Land Rover Defender with all diesel engine options as well as for selected models of the Land Rover Discovery 1/2/3 and Range Rover. The polyester-reinforced silicone hoses are tougher and thicker than the manufacturer's original hoses, making them more suitable for heavy-duty applications (such as towing, performance-enhanced vehicles and desert driving). The operating temperature ranges from -40° to +180° Celsius. The hoses are also designed for higher pressures - this is especially important for performance-enhanced engines. In addition, they do not delaminate or their surface does not peel off. The colour of the silicone hoses is black. For the Land Rover Defender TD4 2.2l there are 2 different versions. The correct version can be determined by the chassis number.Up to chassis number ...BA999999 the 4 part version is needed.From chassis number ...CA000000 the 3 part version is needed.
Prices incl. VAT;
Turbolader Rumpfgruppe für Defender TD4
Turbocharger Hull Assembly for Defender TD4 Turbocharger hull assembly forDefender (all models with 2,4l TDCI Puma) Turbocharger trunk assembly forDefender (all models with 2.2l TDCI Puma)
Prices incl. VAT;
Turbolader Rumpfgruppe für Defender Tdi & Discovery I (Tdi) & Range Rover Classic (Tdi)
Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 300TDI) Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 200TDI)
Prices incl. VAT;
Clutch slave cylinder for Defender TD4
Clutch slave cylinder for Defender TD4 You can choose between a clutch slave cylinder for Defender TD4 up to chassis number 8A999999 and a clutch slave cylinder for Defender TD4 from chassis number 9A000001.ATTENTION: Occasionally, different clutch release bearings may have been fitted by previous owners. If you are not sure which clutch slave cylinder you need for your release bearing, please order the other clutch slave cylinder. You can then test both and return the non-fitting part to us within 4 weeks in its original packaging.
Prices incl. VAT;
Performance optimisation for all Land Rover Td5 2.5
Performance tuning for all Land Rover Td5 2.5 A well-balanced tuning for your Land Rover Defender or Discovery Td5 2.5 - model year 2002-2006, which gets dormant power reserves out of the engine without damaging it. Only engines can be tuned whose control unit has an article number that begins with the numerical sequence NNN or higher (e.g. NNW)! In contrast to many others, this tuning does not aim for a maximum increase in performance, but rather an engine-friendly and at the same time clearly noticeable increase in horsepower and torque. In this way, the engine uses its full potential - this makes sense, for example, when driving frequently on the motorway. The configuration is done according to the customer's wishes - in case of special requirements: Just get in touch with us! Possible configurations: Power increase to 114KW/155PS at 330Nm Power upgrade to 129KW/175PS at 390Nm, incl. larger intercooler The price of the 175hp tuning already includes the larger intercooler. We do not offer it without it, as this would put too much thermal load on the engine. Only for motorsport, no road approval! We recommend reinforced silicone hoses & K&N exchange filters for tuning: Order silicone hoses here / Order exchange filters here. The tuning can either be done at our premises, or you can send us your engine control unit and receive it back in the shortest possible time with the performance-enhanced programming (and possibly the larger intercooler). We offer the following flat rates for the installation of the intercooler: Vehicles without air conditioning Vehicles with air conditioning Please select the desired tuning variant. After ordering, one of our employees will contact you to arrange an appointment, so please be sure to include your telephone number with your order. Please order in good time, we have approx. 4 weeks lead time for workshop appointments. Assembly is only possible on site in Berg near Neumarkt (postcode: 92348).
Prices incl. VAT;
Nakatanenga High Performance Intercooler for Land Rover Defender Td5 / Td4
Nakatanenga High Performance Intercooler for Land Rover Defender Td5 / Td4 The Nakatanenga high performance intercooler is manufactured to our specifications and is ideally suited for Land Rover Defender with Td5 and Td4 engines (2.2, 2.4 and 2.5 litres) as well as for vehicles that are frequently used in trailer operation. It can be used in vehicles with or without air conditioning. It is not suitable for the Land Rover Discovery!The all-aluminium construction not only keeps the weight of the intercooler low compared to other high-performance radiators, it also guarantees optimised heat dissipation. Due to the increased volume compared to the original intercooler, the cooling system now has much more reserves for driving at high temperatures, extremely low speeds, calling up full power or high trailer loads.The flow-optimised design of the radiator as well as its particularly good heat-dissipating coating also contribute to the excellent cooling performance - especially in connection with performance-enhanced engines, this is of essential importance.The cooling net has been specially optimised for off-road use - it is particularly robustly manufactured so that damage from small stones or branches is more than unlikely. It is made of extruded aluminium with soldered fins. The air boxes are made of cast aluminium instead of being welded from individual parts, which also increases the robustness of the cooler.Please select the engine version of your Land Rover Defender.
Prices incl. VAT;
Performance Optimisation and Speed Unlimiter for all Land Rover Td4 2.4
Performance Optimization and Speed Unlimiter for all Land Rover Td4 2.4 A well-balanced tuning for your Defender Td4 2.4 - model year 2007-2011, which gets dormant power reserves out of the Puma / TdCi engine without damaging it. In contrast to many others, this tuning does not focus on a maximum increase in power, but instead achieves an engine-friendly and at the same time clearly noticeable increase in horsepower and torque. By reprogramming the control unit, the factory maximum speed / VMax restriction is also completely removed at the same time, allowing the engine to develop its full power spectrum - this is useful for frequent motorway trips, for example. Optionally, the exhaust gas recirculation (EGR) can also be switched off - this improves the engine's pulling power. Please note that the EGR valve must not be dismantled, otherwise error codes will be generated. Our software-based deactivation, on the other hand, does not trigger such codes and can, of course, be retrofitted without leaving a trace - this applies to all tuning measures offered here. The configuration is done according to the customer's wishes - in case of special requirements: Just contact us! Possible configurations are: no power increase, deactivation of exhaust gas recirculation no power increase, deactivation of cruise control no power increase, deactivation of exhaust gas recirculation & deactivation of speed limiter power increase to 114 KW/155 PS at 420 Nm, incl. deactivation of speed limiter power increase to 114 KW/155 PS at 420 Nm, incl. cancellation of cruise control and deactivation of exhaust gas recirculation power upgrade to 129 KW/175 PS at 440 Nm, incl. speed limiter cancellation, exhaust gas recirculation cut-off and larger intercooler. The price of the 175 HP tuning already includes the larger intercooler. We do not offer it without it, as this would put too much thermal load on the engine. Only for motorsport applications, no road approval! We recommend reinforced silicone hoses & K&N exchange filters for tuning: Order silicone hoses here / Order exchange filters here. The tuning can either be carried out at our premises by appointment, or you can send us your engine control unit and receive it back in the shortest possible time with the performance-enhanced programming (and possibly the larger intercooler for self-installation). We offer the following flat rates for the installation of the intercooler: Vehicles without air conditioning Vehicles with air conditioning Please select the desired tuning variant. After ordering, one of our employees will contact you to arrange an appointment, so please be sure to include your telephone number with your order. Please order in good time, we have approx. 4 weeks lead time for workshop appointments. Assembly is only possible on site in Berg near Neumarkt (postcode: 92348).
Prices incl. VAT;
Stainless steel Defender TD5 centre/rear silencer
Stainless steel center and rear silencer for Land Rover Defender TD5 - 90 and 110 Robust, durable and perfect for the Defender: This center and rear silencer made of high-quality stainless steel is the ideal solution for anyone who wants to upgrade or replace their Land Rover TD5 (90 or 110). Thanks to the stainless steel construction, the silencer offers excellent corrosion protection and a significantly extended service life - ideal for off-road use and demanding conditions Supplied without mounting material. Please select the wheelbase.
Prices incl. VAT;
LOF Clutches EXTREMEspec Release Bearing for 2.5Na & Stumpy R380 Gearboxes
EXTREMEspec release bearing strong and reliable The EXTREMEspec release bearing has been made not only strong and reliable, but also durable by adding a simple feature that allows grease to be used on the surface of the guide tube. Oil rings keep the grease in place and protect it from contamination. This grease barrier not only protects the release bearing, but also the guide tube itself. It also minimises clutch release bearing rattling, a common problem that causes a loud rattling noise at idle due to lack of grease and poor design tolerances. Fits 2.5NA Millitary transmissions and Stumpy R380 from Ashcroft Transmissions
Prices incl. VAT;
LOF Clutches Alignment Tool for Land Rover V8
LOF Clutches Centring Tool This clutch centring pin from LOF Clutches is used to correctly align clutch discs on all ROVER V8 applications with 549991 spigot bush. Made from CNC machined plastic, the clutch arbor fits vehicles with the following engine options: SKU: V8-CAT Categories: Land Rover Series Clutches, Clutch Parts, Land Rover Defender Clutches, Land Rover Discovery Clutches, Range Rover Clutches Tags: 1.6L/2.0L Clutches, 2.25 (Petrol/Diesel) Clutches, 2.8 tgv Clutches, 200/300 Tdi Clutches, Td5 Clutches, TDCI (2.4/2.2L) Clutches
Prices incl. VAT;
Pilot bearing for all Defender TD4 models (MY 2007-2016)
Pilot bearing / Guide bearing for all Defender TD4 models (MY 2007-2016) We recommend replacing the pilot bearing when replacing the clutch.
Prices incl. VAT;
Replacement dust cap for HD wheel hubs
Replacement dust cap for Land Rover part number TF859 For heavy duty drive flanges Terrafirma's heavy duty drive flanges are made from high quality steel compared to the originals and have an increased contact area for added strength. They also have a removable threaded steel dust cap and an O-ring seal. This type replaces the later thinner flanges as fitted to the 300 Tdi Defender & Discoverys and the Td5 Defender. Manufacturer's warranty: approx. 1 year / approx. 20,000 km Suitable for : DEFENDER 1986 - 2006DEFENDER 2007 UPWARDS,DISCOVERY 1 1989 - 1998RANGE ROVER CLASSIC You can find the matching replacement O-ring in the store HERE
Prices incl. VAT;
Replacement O-ring for dust cap Heavy Duty wheel driver
Replacement O-RING FOR TF859 - Heavy Duty Drive Flange - Thin Type Replacement O-ring for the TF859 heavy duty flange from Terrafirma (galvanized thin type, from 1994). Manufacturer's warranty: approx. 1 year / approx. 20,000 km Suitable for:DEFENDER 1986 - 2006DEFENDER from 2007 DISCOVERY 1 1989 - 1998RANGE ROVER CLASSIC You can find the matching replacement dust cap in the store HERE.
Prices incl. VAT;
Set: LOF Clutches ROADspec clutch TD4, incl. adapter and valve adapter clutch slave cylinder
ROADspec TDCI Puma Including adapter and valve adapter Clutch slave cylinder The ROADspec clutch is specifically designed for your daily road-going Defender with 2.4l or 2.2l Puma engine. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than the original. This kit includes the release bearing and concentric slave cylinder unit Description: LOF HD friction material High torque sprung center hub G90 high-temp assembly grease Updated 2.2l genuine release bearing/slave cylinder Pedal weight not heavier than original If you have a 2.4l engine and have not changed to the updated release bearing and slave cylinder then you will need this bleed valve and adapter. SET consists of: ROADspec coupling TD4 Adapter Valve adapter for clutch cylinder You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well. We recommend replacing the pilot bearing when replacing the coupling. Please note: Before installing the clutch, the dimension of the following step must be measured on the flywheel If the dimension is 25.4 mm, the clutch can be installed. If the measurement is 22.2 mm, a Ford flywheel is installed. The clutch is not compatible with this and will malfunction sooner or later. If a Ford flywheel with a measurement of 22.2 mm is installed, you will also need the following Land Rover flywheel.
Prices incl. VAT;
SET: LOF Clutches POWERspec clutch TD4, incl. adapter and valve adapter clutch slave cylinder
POWERspec Clutch TD4 Including adapter and valve adapter Clutch slave cylinder At LOF clutches, POWERspec is the next step up from ROADspec when it comes to performance. If you tow regularly or carry extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a high torque sprung center hub as well as the updated OEM release bearing and the slave cylinder for the 2.2l engine. And by the way, the pedal weight is not heavier than the original. This is your best option for all Tdci Defenders with remapped engines, it is ideal for your daily drive, for towing and overlanding! Description: LOF HD friction material High torque sprung center hub G90 high-temp assembly grease Updated 2.2 genuine release bearing/slave cylinder Pedal weight no heavier than original If you have a 2.4l engine and have not changed to the updated release bearing/slave cylinder then you will need the bleed valve and adapter. SET consists of: POWERspec coupling TD4 Adapter Valve adapter for clutch slave cylinder You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well. We recommend replacing the pilot bearing when replacing the coupling. Please note: Before installing the clutch, the dimension of the following step must be measured on the flywheelIf the dimension is 25.4 mm, the clutch can be installed.If the measurement is 22.2 mm, a Ford flywheel is installed. The clutch is not compatible with this and will malfunction sooner or later.If a Ford flywheel with a measurement of 22.2 mm is installed, you will also need the following Land Rover flywheel.
Prices incl. VAT;
▷ LOF Clutches Alignment Tool for TDI/TD5/TD4
LOF Clutches Clutch Alignment Tool This tool enables you to correctly align clutch discs in most Land Rover models. The alignment tool is CNC machined from black Nylon and will suit TDI, TDCI Puma, TD5, 2.25 and all 4-cylinder engines on Series I - III.
Prices incl. VAT;
LOF Clutches Flywheel Locking Tool for TD5
FLYWHEEL-LOCKING-TOOL This flywheel locking tool by LOF Clutches suits all Defender and Discovery TD5 models from 1998 – 2006, for both solid and dual mass flywheels. The tool locks the flywheel in place allowing the removal and torqueing of the TD5 flywheel bolts when changing the dual mass flywheel and the crank seal. A really handy bit of kit to keep in the toolbox. Includes 2 x M10 fixing bolts.
Prices incl. VAT;
LOF Clutches POWERslave clutch slave cylinder for TD5
POWERslave for Td5 Discovery and Defender Heavy clutches with high pedal weight are a known phenomenon especially in Td5 Defenders (1998-2006) but also in many Td5 Discovery models (1998-2004). But there’s a simple and cost-effective solution for anyone experiencing problems with the heavy pedal. Installing a POWERslave slave cylinder will reduce the pedal weight by up to 30% in comparison to the original set-up. Please note: the POWERslave cylinder lowers the biting point of the clutch. On Defenders, the biting point can be adjusted in the pedal box. On Discovery 2 models, where the pedal box is not adjustable, we recommend installing the slave cylinder only after the clutch is worn in after a few thousand miles. LOF does not recommend the installation: for newly installed clutches in combination with the LOF Power master cylinder
Prices incl. VAT;
LOF Clutches EXTREMEspec improved MT82 intermediate shaft for TD4
THE ALL NEW EXTREMEspec MT82 output shaft kit from LOF On Defenders with 2.4 and 2.2 Tdci Puma engines, it is a very common fault that the coupling shaft between the MT82 gearbox and the Lt230 transfer box wears out and fails! This is due to the shaft’s original two-part design with a dry splined coupling. Without grease, the grinding of metal on metal wears down the spines and eventually you’ll notice first a clunking noise and ultimately a total loss of drive. Solutions with specially greased OEM parts were unable to fix the problem, so the specialists at LOF have come up with a solid one-piece design for the coupling shaft to replace the splined coupling. LOF is so convinced by this EXTREMEspec innovation, that they offer a lifelong warranty on the component. Description: 1x LOF solid output shaft, heat treated and made from 300M material 1x M12 long cap head draw bolt 1x Nord lock washer set (M12) 1x special retaining bolt adapter 1x genuine Coretco MT82 rear drive shaft seal 1x M22 grub screw slide hammer adapter (DO NOT INSTALL WITH THE SHAFT. KEEP IN TOOLBOX)
Prices incl. VAT;
LOF Clutches ROADspec clutch 200/300 TDI
ROADspec TDI 200/300tdi This ROADspec clutch is specifically designed for your daily road-going Land Rover 200 or 300 Tdi. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than the original. Description: LOF heavy duty friction material High torque sprung center hub High-quality NSK release bearing G90 high-temp assembly grease CNC wire-formed bearing retaining clip CNC wire-formed pushrod retaining clip High tensile bolt pack for clutch cover Pedal weight not heavier than the original NOT SUITABLE FOR ENGINES WITH UPGRADED TURBO (VNT/ HYBRID), Please see 2.8 TGV HS INTERNATIONAL CATEGORY. You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well.
Prices incl. VAT;
LOF Clutches ROADspec clutch TD5 incl. single mass flywheel
ROADspec TD5 Solid Mass Flywheel Kit LOF Clutches’ goal was to deliver the best Solid Mass Flywheel kit for Td5 Discovery and Defender. They have engineered this product with two specific objectives: first, to prevent the typical vibrations for Td5 and second, to guarantee long lasting service from clutch and flywheel. The ROADspec clutch is specifically designed for your daily road-going Land Rover Defender or Discovery Td5. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than the original. Dual mass flywheels are prone to overheating in tuned vehicles with remapped engines or when the clutch has to deal with a lot of heavy towing or extreme conditions. Replacing DMFs with solid mass flywheels will prevent thermal damage. LOF’s solid mass flywheels conform to the characteristics of the original flywheels but are much more reliable, durable and even cheaper than components by Valeo or LUK. You can also easily upgrade the configuration with an EXTREMEspec heavy duty release bearing. LOF are testing their replacement kits with leading Land Rover tuning specialists in the UK and Europe. Perfect for vehicles with a stage1 map/ 400Nm / 180 bhp. Description: LOF heavy duty friction material LOF extra strong clutch cover 1x 3 stage pre-dampened sprung driven plate 1x LOF solid flywheel 1x high quality plastic release bearing 1x G90 high-temp assembly grease 6x clutch cover bolts 1x CNC wire-formed anti-rattle wire spring clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM 8x flywheel bolts Pedal weight not heavier than original You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well. Legal notice: Due to technical changes, noise may be generated. This is technically harmless and therefore no reason for complaint! Installation at your own risk without guarantee for damage to the gearbox and drive train.
Prices incl. VAT;
▷ LOF Clutches ROADspec clutch TD5 for dual mass flywheel
ROADspec TD5 for vehicles with dual mass flywheel LOF Clutches’ goal was to deliver the best clutch kit for Td5 Discovery and Defender with dual mass flywheel. They have engineered this product with two specific objectives: first, to prevent the typical vibrations for Td5 and second, to guarantee long lasting service from clutch and flywheel. The ROADspec clutch is specifically designed for your daily road-going Td5 Defender or Discovery. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than original. Perfect for vehicles with a Stage1 map/ 400Nm / 180 bhp. Description: LOF heavy duty friction material Billet machined center hub High quality release bearing 1x G90 high-temp assembly grease Clutch cover Nyloc fasteners 1x CNC wire-formed anti-rattle wire spring clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well. Legal Disclaimer: Technical modification can result in noise generation. This is not detrimental to the vehicle’s reliability or performance and therefore no cause for complain! Modifications to the vehicle are undertaken at your own risk without warranty for any damages to transmission and drive train.
Prices incl. VAT;
LOF Clutches POWERspec clutch 200/300 TDI
POWERspec TDI 200/300Tdi At LOF Clutches, POWERspec is the next step up from ROADspec when it comes to performance. If you tow regularly or carry extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a high torque sprung center hub as well as the updated release bearing and the slave cylinder for the 2.2l engine. And by the way, the pedal weight is not heavier than the original. The POWERspec clutch kit is suitable for vehicles with tuned injection pumps (boost pin/spacer), but not suitable for VNT turbo engines, please see 2.8 TGV HS INTERNATIONAL CATEGORY. Description: LOF heavy duty friction material High torque sprung center hub LOF Clutches EXTREMEspec release bearing G90 High-temp assembly grease CNC wire-formed bearing retaining clip CNC wire-formed pushrod retaining clip High tensile bolt pack for clutch cover 1x OEM spigot bush 1x OEM fork bush Pedal weight not heavier than original Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well.
Prices incl. VAT;
LOF Clutches POWERspec clutch TD5 for dual mass flywheel
POWERspec TD5 for clutches with dual mass flywheel At LOF Clutches, POWERspec is the next step up from ROADspec when it comes to performance. If your Td5 Defender or Discovery tows regularly or carries extra weight like expedition trucks do, then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a billet machined center hub as well as an EXTREMEspec release bearing. And by the way, the pedal weight is not heavier than the original. Perfect for vehicles with a Stage2 map/ 450Nm/ 200 bhp. Description: LOF heavy duty friction material Billet machined center hub LOF Clutches EXTREMEspec release bearing G90 High-temp assembly grease Clutch cover Nyloc fasteners 1x CNC wire-formed anti rattle clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well! Legal Disclaimer: Technical modification can result in noise generation. This is not detrimental to the vehicle’s reliability or performance and therefore no cause for complain! Modifications to the vehicle are undertaken at your own risk without warranty for any damages to transmission and drive train.
Prices incl. VAT;