Our assembly flat rates
Hier erfahren Sie alles über unsere Montagepauschalen, die Dauer, den Einbau und die notwendie Terminabsprache.
Filter products
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for INEOS Grenadier Long-lasting corrosion protection for your INEOS Grenadier: Using Mike Sanders Corrosion Protection Grease, TimeMAX underbody protection and supplementary Normfest Protector Wax, our workshop team draws on 30 years of experience to support the long-term protection of your off-road vehicle – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection for the INEOS Grenadier. This allows you to supplement your Grenadier's existing corrosion protection, protect heavily exposed areas of the ladder chassis, underbody and bodywork, and help prevent expensive rust damage over the long term. The following services are included in the complete package: Comprehensive corrosion protection: Additional treatment of accessible areas of the ladder chassis inside and out, underbody, wheel arches, axles, doors, rear doors and bonnet. Professional preparation: Removal of relevant covers and trim panels and assessment of existing corrosion protection. Extensive protective masking: Careful masking of bodywork, painted surfaces, windows, brakes and other components that must not be treated. Mike Sanders cavity protection: Additional long-term protection using heated, creeping corrosion protection grease and specialist cavity probes in suitable cavities. TimeMAX underbody protection: Durable protective coating for suitable external underbody surfaces. Normfest Protector Wax: Supplementary corrosion protection in selected areas. Endoscopic inspection: Visual inspection of accessible cavities before and after treatment. Reassembly and cleaning: Reinstallation of removed components and final cleaning. A detailed explanation of each stage of the treatment can be found below. Your benefits – and what they mean for your INEOS Grenadier Additional long-term protection: The treatment supplements the corrosion protection already applied to the Grenadier at the factory. Protection for exposed areas: Areas subjected to stone chips, dirt and road spray can receive particular attention. Protection from within: Suitable, accessible areas inside the ladder chassis and bodywork receive supplementary protection. Long-lasting creeping action: Mike Sanders Corrosion Protection Grease remains flexible and can continue to spread into narrow gaps when temperatures rise. Durable underbody protection: TimeMAX protects suitable external metal surfaces against typical environmental influences and mechanical stresses. Professional application: Careful preparation, protective masking, specialist cavity probes and endoscopic inspections enable controlled treatment. Long-term preservation: Additional corrosion protection helps preserve the vehicle's structural integrity under demanding operating conditions. Our extensive experience in dealing with corrosion We have been servicing and repairing off-road vehicles for 30 years and know from first-hand workshop experience how continuous exposure to corrosion-promoting conditions can affect vehicles over time. We regularly see how moisture, road salt, dirt and damaged protective coatings can affect the long-term condition of metal components. The INEOS Grenadier already benefits from extensive factory corrosion protection. Its ladder chassis is protected using processes including cathodic dip coating, powder coating and cavity wax, while its body is made from galvanised steel. Despite these factory-applied protective measures, the Grenadier remains an off-road vehicle whose underbody, axles and other components may be exposed to considerable stresses in everyday use. Professional supplementary corrosion protection can provide additional protection in suitable areas. The aim is to support the existing protective systems and help prevent damage before it develops. Comprehensive corrosion protection – protecting relevant components Even on a vehicle with good factory corrosion protection, it makes sense to inspect heavily exposed areas regularly and supplement their protection where appropriate. During treatment, we consider the ladder chassis inside and out, underbody, wheel arches, axles and suitable areas of the doors, rear doors and bonnet. Existing protective coatings can be exposed to demanding conditions after extensive off-road driving, repeated contact with mud and water, or regular winter use. Before applying additional corrosion protection, we therefore assess which surfaces and cavities are accessible and which protective materials are suitable for the existing coatings. Disassembly – accessing concealed areas Additional corrosion protection must be applied where treatment is technically appropriate and the protective material can be used effectively. We therefore remove relevant covers and trim panels, providing access to areas that are concealed or difficult to reach when the vehicle is fully assembled. Dirt and moisture may accumulate behind underbody panels, around joints and in concealed areas. Disassembly allows these locations to be assessed and treated more thoroughly. Protective masking – precise application without unwanted overspray Corrosion protection belongs on the intended surfaces – not on paintwork, windows, brakes or sensitive vehicle components. Before application, the vehicle is carefully covered and masked. Bodywork, painted surfaces, windows, the braking system and other components that must not be treated are protected. This preparation is particularly important on a modern off-road vehicle with numerous electrical and mechanical components, allowing the protective materials to be applied in a controlled manner. Mike Sanders Corrosion Protection Grease – supplementary cavity protection with long-lasting creeping action The key advantage: the grease remains capable of creeping into narrow gaps and seams even after application. Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. The material can be used to provide supplementary corrosion protection inside suitable, accessible cavities. It forms a protective film on treated metal surfaces. Thanks to its temperature-dependent creeping properties, it can continue to spread into narrow gaps, reducing contact between the metal, moisture and oxygen. Important for the Grenadier: The existing factory-applied cavity protection must be considered when selecting and applying additional materials. The treatment is therefore adapted to suitable areas and existing coatings. TimeMAX underbody protection – supplementary protection against moisture, dirt and stone chips The INEOS Grenadier's underbody is designed for demanding use but remains exposed to mechanical stresses and environmental conditions that can contribute to corrosion. Stone chips, mud, road spray and road salt can affect existing protective coatings. Inspections for damage are particularly worthwhile after demanding off-road trips. We use high-quality TimeMAX underbody protection on suitable external underbody surfaces. The durable coating can supplement existing protection and shield treated metal surfaces against environmental influences. It is the combination that makes the difference: TimeMAX protects suitable external underbody surfaces, while Mike Sanders Corrosion Protection Grease is used in appropriate cavities. Normfest Protector Wax – supplementary protection in selected areas We also use Normfest Protector Wax in selected areas where the material is suitable for the existing surfaces and coatings. This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film on treated metal surfaces. By selecting protective materials according to their individual properties, additional corrosion protection can be tailored to the different areas of the vehicle. Endoscopic inspection – checking cavities before and after treatment Visual inspection of accessible cavities helps us assess the condition of the areas being treated. Before treatment, suitable cavities are examined using an endoscope, allowing us to inspect visible internal surfaces. Following treatment, another endoscopic visual inspection is carried out to check the application and distribution of the protective material in accessible areas. Reassembly and cleaning – completing the treatment properly Professional reassembly and cleaning are included in the complete workshop service. Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components. Finally, the areas affected during the work are cleaned, completing the supplementary corrosion protection treatment. Vehicle condition and possible additional work The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage. If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle. Supplementary corrosion protection may also be beneficial for INEOS Grenadier vehicles that have already been used extensively. However, existing coatings, possible damage and the overall condition of the vehicle must be taken into account. Applying protective materials cannot reverse existing rust damage. Manufacturer warranty notice: Before booking, please check whether additional underbody and cavity corrosion protection could affect the applicable warranty conditions of your INEOS Grenadier. This treatment does not replace any inspections required by the manufacturer. Booking an appointment and treatment duration Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany. Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich. When placing your order, please provide the model year and exact version of your INEOS Grenadier, along with your telephone number. This allows us to assess the work required for your particular vehicle and arrange a suitable appointment. Alternatively, you can contact us first on +49 9181 466 644 before placing your order. The comprehensive treatment, including preparation, protective masking, supplementary corrosion protection, inspection, reassembly and cleaning, normally takes 2–3 days.
Prices incl. VAT;
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for Mercedes G-Class W463 Long-lasting corrosion protection for your Mercedes G-Class W463: Using Mike Sanders Corrosion Protection Grease, TimeMAX underbody protection and supplementary Normfest Protector Wax, our workshop team draws on 30 years of experience to protect corrosion-prone areas – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection for the Mercedes G-Class W463. This helps protect your G-Class's ladder chassis, underbody and corrosion-prone bodywork against rust, avoid costly welding and repairs, and preserve the vehicle's structural integrity over the long term. The following services are included in the complete package: Comprehensive corrosion protection: Treatment of the ladder chassis inside and out, underbody, wheel arches, axles, doors, rear door and bonnet. Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas. Extensive protective masking: Careful masking of the vehicle, particularly bodywork, painted surfaces, windows, brakes and other components that must not be treated. Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for effective corrosion protection inside enclosed areas and long-term creeping action. TimeMAX underbody protection: High-quality, durable protective coating for the underbody surfaces to be treated. Normfest Protector Wax: Supplementary corrosion protection in selected areas. Endoscopic inspection: Visual inspection of accessible cavities before and after treatment. Reassembly and cleaning: Reinstallation of removed components and final cleaning. A detailed explanation of each stage of the treatment can be found below. Your benefits – and what they mean for your Mercedes G-Class Long-term corrosion protection: Reduces contact between treated metal surfaces, moisture and oxygen, helping to slow down corrosion processes. Protection from within: Protects vulnerable areas inside the ladder chassis and bodywork, where rust may develop unnoticed. Long-lasting creeping action: Mike Sanders Corrosion Protection Grease continues to spread into narrow seams and overlapping panels after application. Durable underbody protection: Protects against moisture, road salt, road spray and the typical stresses of road and off-road use. Three premium branded products: Mike Sanders, TimeMAX and supplementary Normfest products are used according to their individual properties. Professional application: Careful disassembly, masking, specialist cavity probes and endoscopic inspections enable thorough treatment. Long-term preservation: Preventative corrosion protection helps avoid expensive rust damage and preserve the vehicle's structural integrity. Our extensive experience in dealing with corrosion We have been servicing and repairing off-road vehicles for 30 years and know from first-hand experience just how serious rust damage to the chassis, underbody and bodywork can become. Particularly on older Mercedes G-Class vehicles, concealed corrosion can lead to extensive and expensive repairs. Areas that deserve particular attention on the W463 include the ladder chassis and its crossmembers and mounting points, lower door edges, sills, wheel arches, the windscreen surround and the rear door. Moisture and dirt can collect in these areas and contribute to corrosion. Our experience helps us identify vulnerable areas and treat them with particular care. Protect your G-Class before minor rust spots develop into major repairs. Comprehensive corrosion protection – protecting all relevant components Effective long-term corrosion protection must go beyond the visible underbody. Internal cavities are equally important. We treat the ladder chassis inside and out, the underbody, wheel arches, axles and corrosion-prone areas of the doors, rear door and bonnet. Moisture can accumulate inside chassis sections, along panel seams, welded joints and bodywork transitions. Rust often develops unnoticed in these areas and can gradually damage the vehicle's structure. By combining different protective materials, we can address both external metal surfaces and difficult-to-reach internal cavities. Disassembly – accessing concealed corrosion-prone areas Effective corrosion protection must also reach areas that are not directly accessible when the vehicle is fully assembled. We therefore remove relevant covers and trim panels. This allows us to uncover important access points and apply protective materials precisely in areas that would otherwise be difficult to reach. Dirt and moisture may accumulate around sill sections, behind trim panels and around attachments. These areas should not be overlooked during comprehensive corrosion protection. Protective masking – precise application without unwanted overspray Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes. Before treatment, the vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other components that must not come into contact with the products. This extensive preparation enables controlled application and reduces the risk of unwanted contamination or interference with sensitive components. Mike Sanders Corrosion Protection Grease – lasting creeping action inside cavities The key advantage: the corrosion protection grease remains capable of creeping into narrow gaps and panel seams, even after application. Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material deep inside the ladder chassis and other accessible cavities of the Mercedes G-Class. The grease forms a protective film on treated metal surfaces. Thanks to its temperature-dependent creeping properties, it continues to spread and can penetrate welded seams, overlapping panels and particularly narrow gaps. How it protects: The grease film forms a barrier against moisture and oxygen. Unlike rigid coatings, it remains flexible and can continue to provide protection during temperature-related expansion and contraction. TimeMAX underbody protection – protection against moisture, dirt and stone chips The underbody of a G-Class is exposed to demanding conditions in everyday road use as well as off-road driving. Stone chips, road spray, road salt, mud and dirt can damage existing protective coatings or gradually wear them away. Corrosion may then begin on exposed metal surfaces. We use high-quality TimeMAX underbody protection on the external underbody surfaces to be treated. The durable coating protects against corrosion-promoting environmental influences and typical mechanical stresses. It is the combination that makes the difference: TimeMAX protects external underbody areas, while Mike Sanders Corrosion Protection Grease is particularly effective inside cavities and narrow gaps. Normfest Protector Wax – additional protection in selected areas We also use Normfest Protector Wax in selected areas to complement the overall treatment. This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film on the treated metal surfaces. It is applied wherever its properties are particularly suitable for the area concerned, allowing the different protection systems to complement one another. Endoscopic inspection – checking cavities before and after treatment Hard-to-reach areas should also be inspected – not just the visible surfaces. Before treatment, we examine accessible cavities using an endoscope. This allows us to assess the condition of internal surfaces and identify possible rust spots. Following treatment, another endoscopic visual inspection is carried out to check the application and distribution of the protective material in the areas that can be inspected. Reassembly and cleaning – completing the treatment properly The complete package also includes professionally restoring the vehicle to its assembled condition after treatment. Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components. Finally, the areas affected during the work are cleaned, completing the comprehensive corrosion protection treatment. Vehicle condition and possible additional work The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage. If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle. Professional corrosion protection can also be worthwhile for older Mercedes G-Class vehicles with existing rust. By shielding treated metal surfaces from moisture and oxygen, further corrosion can be slowed down. However, existing rust damage cannot be reversed by applying protective materials. Careful preparation and, where necessary, prior repairs are essential. Booking an appointment and treatment duration Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany. Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich. When placing your order, please provide the model year and exact version of your Mercedes G-Class W463, along with your telephone number. A member of our team will contact you to arrange an appointment and confirm the work required for your particular vehicle. Alternatively, you can contact us first on +49 9181 466 644 to arrange an appointment before ordering the service. The comprehensive treatment, including disassembly, extensive protective masking, application, inspection, reassembly and cleaning, normally takes 2–3 days.
Prices incl. VAT;
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for BAW 212 Long-lasting corrosion protection for your BAW 212: Using Mike Sanders Corrosion Protection Grease, TimeMAX underbody protection and supplementary Normfest Protector Wax, our workshop team draws on 30 years of experience to protect the corrosion-prone areas of your off-road vehicle – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection for the BAW 212. Protect your BAW 212 from the outset. This helps prevent corrosion affecting the ladder chassis, underbody and vulnerable bodywork, avoid expensive repairs later and preserve your vehicle's structural integrity over the long term. The following services are included in the complete package: Comprehensive corrosion protection: Treatment of the ladder chassis inside and out, underbody, wheel arches, axles, doors, tailgate and bonnet. Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas. Extensive protective masking: Careful masking of bodywork, painted surfaces, windows, brakes and other components that must not be treated. Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for long-lasting, creeping corrosion protection. TimeMAX underbody protection: High-quality, durable coating for the underbody surfaces to be treated. Normfest Protector Wax: Supplementary corrosion protection in selected areas. Endoscopic inspection: Visual inspection of accessible cavities before and after treatment. Reassembly and cleaning: Reinstallation of removed components and final cleaning. A detailed explanation of each stage of the treatment can be found below. Your benefits – and what they mean for your BAW 212 Corrosion prevention from the outset: Early treatment protects accessible metal surfaces before heavy contamination or rust damage develops. Protection from within: Protects areas inside the ladder chassis and bodywork where moisture can accumulate. Long-lasting creeping action: Mike Sanders Corrosion Protection Grease remains flexible and continues to spread into narrow gaps and seams when temperatures rise. Durable underbody protection: Protects treated surfaces against moisture, dirt, road salt and typical off-road stresses. Three premium branded products: Mike Sanders, TimeMAX and supplementary Normfest are used according to their individual material properties. Professional application: Disassembly, careful masking, specialist cavity probes and endoscopic inspections enable thorough treatment. Long-term preservation: Preventative corrosion protection helps avoid future rust damage and expensive repairs. Our extensive experience in dealing with corrosion We have been servicing and repairing off-road vehicles for 30 years and know from first-hand workshop experience what rust damage can do to chassis, axles, underbody components and bodywork. Our experience demonstrates the importance of early corrosion protection, especially for vehicles regularly driven off-road or during winter. The BAW 212 combines traditional off-road construction with modern technology. Its robust ladder chassis and suspension components designed for demanding terrain are nevertheless exposed to moisture, dirt, road spray and road salt. That is why we focus on preventative protection before significant corrosion damage develops. Early treatment is generally much easier than removing rust and repairing components that have already been damaged. Comprehensive corrosion protection – protecting all relevant components Long-term corrosion protection begins well beyond the visible underside of the vehicle. Internal chassis sections and body cavities deserve particular attention. We treat the ladder chassis inside and out, the underbody, wheel arches, axles and corrosion-prone areas of the doors, tailgate and bonnet. Moisture and dirt can accumulate inside cavities, around panel joints and in hard-to-reach areas. These areas are particularly exposed after driving along wet tracks, through mud or on salted roads during winter. Comprehensive treatment specifically protects vulnerable metal surfaces and supplements the existing corrosion protection of your BAW 212. Disassembly – accessing concealed areas Effective corrosion protection must also reach areas that cannot be seen directly from outside. We therefore remove relevant covers and trim panels before treatment. This provides access to important application points and otherwise difficult-to-reach areas. It allows us to apply protective materials precisely and introduce them into internal cavities instead of treating only visible surfaces. Protective masking – precise application without unwanted overspray Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes. Before treatment, the vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other sensitive components that must not be treated. This extensive preparation enables controlled application and reduces the risk of unwanted contamination. Mike Sanders Corrosion Protection Grease – long-term protection inside the ladder chassis The key advantage: Mike Sanders Corrosion Protection Grease remains capable of creeping into narrow gaps and panel seams even after application. The grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material into accessible cavities inside the ladder chassis and bodywork. A protective grease film forms on the treated metal surfaces. Thanks to its temperature-dependent creeping properties, the material can also reach narrow overlapping panels, welded seams and gaps. How it protects: The grease film reduces contact between the metal surfaces, moisture and oxygen, helping to prevent corrosion over the long term. TimeMAX underbody protection – protection for road and off-road use Even a new off-road vehicle is continually exposed to moisture, dirt and mechanical stresses underneath. Stone chips, road spray, road salt and mud can wear down or damage existing protective coatings. Where metal surfaces become exposed, corrosion may begin. We use high-quality TimeMAX underbody protection on the external underbody surfaces to be treated on the BAW 212. The durable coating forms a protective barrier against corrosion-promoting environmental influences. It is the combination that makes the difference: TimeMAX protects more heavily exposed external underbody areas, while Mike Sanders is particularly effective inside enclosed cavities. Normfest Protector Wax – additional protection in selected areas We also use Normfest Protector Wax in selected areas to complement the treatment. This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film. It can therefore be used in areas where its particular material properties are suitable, allowing the different protective products to work together as a vehicle-specific treatment. Endoscopic inspection – checking cavities before and after treatment Protection should not simply be applied to visible surfaces; accessible cavities should also be inspected. Before treatment, we examine accessible cavities using an endoscope, allowing us to assess the condition of internal surfaces. Following treatment, another endoscopic visual inspection is carried out to check the application and distribution of the protective material in the areas that can be inspected. Reassembly and cleaning – completing the treatment properly Professional corrosion protection does not end once the protective materials have been applied. After treatment, we remove the protective masking and reinstall the previously removed trim panels and components. Finally, the areas affected during the work are cleaned, completing the corrosion protection treatment. Vehicle condition and possible additional work The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage. If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle. Professional corrosion protection may also be worthwhile for vehicles that have already been in use. If rust is present, the affected areas must first be assessed and, if necessary, prepared or repaired. Corrosion protection can slow down further deterioration but cannot reverse existing damage. Booking an appointment and treatment duration Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany. Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich. When placing your order, please provide the model year and exact version of your BAW 212, along with your telephone number so that we can arrange an appointment. A member of our team will contact you to schedule your visit. Alternatively, you can contact us first on +49 9181 466 644 before placing your order. The comprehensive treatment, including disassembly, protective masking, application, inspection, reassembly and cleaning, normally takes 2–3 days.
Prices incl. VAT;
Installation of the VB Air Suspension air suspension for the Land Rover Defender Td4 and Td5 90/110/130. Appointment by arrangement. On request, we also offer the TÜV demonstration incl. preparation of the modification report at a fixed price. Please select the appropriate option.
Prices incl. VAT;
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for Jeep Wrangler JK Long-lasting corrosion protection for your Jeep Wrangler JK or Wrangler Unlimited JK: Using Mike Sanders Corrosion Protection Grease and TimeMAX underbody protection, our workshop team draws on 30 years of experience to protect corrosion-prone areas – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection for the Jeep Wrangler JK and Wrangler Unlimited JK, model years 2007 to 2018. This helps protect your Jeep's ladder chassis, underbody and corrosion-prone bodywork against rust, avoid costly repairs and preserve the vehicle's structural integrity over the long term. The following services are included in the complete package: Comprehensive corrosion protection: Treatment of the ladder chassis inside and out, underbody, wheel arches, axles, doors, tailgate, bonnet and other corrosion-prone areas. Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas. Extensive protective masking: Careful masking of the vehicle, particularly bodywork, painted surfaces, windows, brakes and other components that must not be treated. Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for effective corrosion protection deep inside enclosed areas and long-term creeping action. TimeMAX underbody protection: Durable protective coating for the underbody surfaces to be treated. Additional corrosion protection: Further protection of selected areas using suitable products where required. Endoscopic inspection: Visual inspection of accessible cavities before and after treatment. Reassembly and cleaning: Reinstallation of removed components and final cleaning. A more detailed explanation of each service can be found below. Your benefits – and what they mean for your Jeep Wrangler JK Long-term corrosion protection: Reduces contact between metal, moisture and oxygen, helping to slow down corrosion processes. Protection from within: Protects particularly vulnerable areas inside the ladder chassis and bodywork, where rust may remain unnoticed for a long time. Long-lasting creeping action: Mike Sanders Corrosion Protection Grease continues to spread into narrow seams, gaps and overlapping panels even after application. Durable underbody protection: Helps protect treated metal surfaces against moisture, road spray, road salt and the typical demands of road and off-road driving. Complementary protection systems: Mike Sanders for cavities and TimeMAX for more heavily exposed external underbody surfaces. Professional application: Disassembly, careful masking, specialist cavity probes and endoscopic inspections enable thorough treatment. Long-term value retention: Preventative corrosion protection helps preserve the vehicle's structural integrity and avoid expensive rust damage. Our extensive experience in dealing with corrosion We have been working with off-road vehicles in our workshop for 30 years and know from first-hand experience just how serious corrosion damage can become on chassis, underbody components and concealed areas of the bodywork. Vehicles regularly driven off-road are exposed to moisture, mud, dirt and mechanical stresses that can affect their long-term condition. The Jeep Wrangler JK is no exception. Rust may develop in concealed areas and remain undetected for a considerable time. During corrosion protection treatment, we therefore pay particular attention to the ladder chassis and its cavities, joints, seams and other vulnerable areas. Protect your Wrangler in good time, before minor rust spots develop into extensive repairs – helping to ensure a long service life and preserve your vehicle's value. Comprehensive corrosion protection – protecting all relevant components For effective long-term corrosion protection, it is essential to treat not only the visible underbody but also the internal cavities. We treat the ladder chassis inside and out, the underbody, wheel arches, axles and suspension areas, as well as corrosion-prone sections of the doors, tailgate and bonnet. In the Jeep Wrangler JK, moisture and dirt can accumulate inside the ladder chassis, around chassis joints, along panel seams and within hard-to-reach body cavities. Corrosion can develop in these areas without being immediately visible from the outside. Comprehensive treatment specifically protects these vulnerable areas and helps preserve the vehicle's structural integrity over the long term. Disassembly – accessing concealed corrosion-prone areas Effective corrosion protection must also reach areas concealed by trim panels or accessories when the vehicle is fully assembled. We therefore remove relevant covers and trim panels before treatment. This provides access to important application points and areas that would otherwise be difficult to reach. It allows us to apply the protective materials precisely where they are needed rather than treating only externally visible surfaces. Protective masking – precise application without unwanted overspray Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes. Before application, the vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other components that must not come into contact with the protective products. This extensive preparation enables controlled application and reduces the risk of unwanted contamination or interference with sensitive components. Mike Sanders Corrosion Protection Grease – lasting creeping action inside cavities The key advantage: the corrosion protection grease remains capable of creeping into narrow gaps and panel seams, even after application. Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material deep inside the Jeep Wrangler JK's ladder chassis and other enclosed cavities. The grease forms a protective film on the treated metal surfaces. Thanks to its temperature-dependent creeping properties, it continues to spread over time and can penetrate welded seams, overlapping panels and extremely narrow gaps. How it protects: The grease film creates a barrier between the metal, moisture and oxygen. Unlike rigid coatings, it remains flexible and can continue to provide protection even when the material expands and contracts due to temperature changes. TimeMAX underbody protection – protection against moisture, dirt and stone chips The underbody of a Jeep Wrangler JK is exposed to particularly demanding conditions, especially when the vehicle is regularly driven off-road. Stone chips, mud, dirt, road spray and road salt can damage or gradually wear away existing protective coatings. Corrosion may then begin on exposed metal surfaces. We use high-quality TimeMAX underbody protection on the external underbody surfaces to be treated. The coating forms a durable barrier against corrosion-promoting environmental influences and the typical stresses of road and off-road use. It is the combination that makes the difference: TimeMAX protects external underbody surfaces, while Mike Sanders is particularly effective inside enclosed cavities and narrow gaps. Additional corrosion protection – tailored to each area Depending on the condition of the vehicle and the area being treated, additional protective measures may be beneficial. Suitable corrosion protection products can be used in selected areas where their material properties are appropriate for the particular application. This allows the treatment to be adapted to the different requirements of the Jeep Wrangler JK's bodywork and underbody components. Endoscopic inspection – checking cavities before and after treatment Hard-to-reach areas should also be inspected – not just the visible surfaces. Before treatment, we examine accessible cavities using an endoscope. This allows us to assess the condition of internal surfaces and identify possible rust spots. Following treatment, another endoscopic visual inspection is carried out. This enables us to check the application and distribution of the corrosion protection material in the areas that can be inspected. Reassembly and cleaning – completing the treatment properly The complete package also includes professionally restoring the vehicle to its assembled condition after treatment. Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components. Finally, the areas affected during the work are cleaned. This completes the comprehensive corrosion protection treatment. Vehicle condition and possible additional work The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage. If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle. Professional corrosion protection can also be worthwhile for older Jeep Wrangler JK vehicles with existing rust. By shielding treated metal surfaces from moisture and oxygen, further corrosion can be slowed down. Careful inspection and preparation of the affected areas are essential, and existing structural damage may need to be repaired beforehand. Booking an appointment and treatment duration Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany. Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich. The fixed-price package is available for the Jeep Wrangler JK and Jeep Wrangler Unlimited JK, model years 2007 to 2018. Please select the correct vehicle version when ordering: Jeep Wrangler JK: 2-door, short wheelbase (SWB). Jeep Wrangler Unlimited JK: 4-door, long wheelbase (LWB). Please provide your telephone number when placing your order so that we can arrange an appointment. A member of our team will contact you using the number provided to schedule your visit. Alternatively, you can contact us first on +49 9181 466 644 to arrange an appointment before ordering the service. The comprehensive treatment, including preparation, masking, corrosion protection and reassembly, normally takes 2–3 days.
Prices incl. VAT;
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for Land Rover Defender Long-lasting corrosion protection for your Land Rover Defender: Using Mike Sanders Corrosion Protection Grease and TimeMAX underbody protection, our workshop team draws on 30 years of experience to protect known corrosion-prone areas – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection. This helps protect your Defender's chassis, underbody and corrosion-prone bodywork against rust, avoid costly repairs and preserve your Land Rover's structural integrity over the long term. The following services are included in the complete package: Comprehensive corrosion protection: Treatment of the chassis inside and out, underbody, wheel arches, axles, doors, tailgate and bonnet. Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas. Extensive protective masking: Careful masking of the entire vehicle, particularly bodywork, painted surfaces, windows, brakes and other components that must not be treated. Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for effective corrosion protection deep inside enclosed areas and long-term creeping action. TimeMAX underbody protection: High-quality protective coating for the entire underbody. Normfest Protector Wax: Additional corrosion protection in selected areas. Endoscopic inspection: Visual inspection of cavities before and after treatment. Reassembly and cleaning: Reinstallation of removed components and final cleaning. A more detailed explanation of each service can be found below. Your benefits – and what they mean for your Defender Long-term corrosion protection: Reduces contact between metal, moisture and oxygen, helping to slow down corrosion processes. Protection from within: Protects particularly vulnerable areas inside the chassis and bodywork, where rust often develops unnoticed for a long time. Long-lasting creeping action: Mike Sanders grease continues to reach narrow seams and gaps even after application, supplementing the original protective coating. Durable underbody protection: Reduces the impact of typical environmental conditions on treated metal surfaces. Three premium branded products: Different protective materials are combined according to their specific areas of application. Professional application: Disassembly, masking, specialist cavity probes and endoscopic inspections enable thorough treatment. Long-term value retention: Preventative corrosion protection helps preserve the vehicle's structural integrity and avoid expensive rust damage. Our extensive experience in dealing with corrosion We have been servicing and repairing Land Rover Defenders for 30 years and know from first-hand experience just how serious rust damage can become, particularly in concealed areas of the chassis and underbody. We are familiar with the typical weak points and understand what effective corrosion protection requires. Protect your Defender in good time, before minor rust spots develop into expensive repairs – helping to ensure a long service life and preserve your vehicle's value. Comprehensive corrosion protection – protecting all relevant components For effective long-term corrosion protection, it is essential to treat not only the visible underbody but also the internal cavities. We treat the ladder chassis inside and out, the underbody, wheel arches, axles and corrosion-prone areas of the doors, tailgate and bonnet. Moisture can accumulate inside the ladder chassis, along panel seams and in hard-to-reach body cavities. Rust often develops unnoticed in these areas, spreading from the inside out. Comprehensive treatment specifically protects these vulnerable areas and helps preserve the vehicle's structural integrity over the long term. Disassembly – accessing concealed corrosion-prone areas Effective corrosion protection must also reach areas that are concealed when the vehicle is fully assembled. We therefore remove relevant covers and trim panels before treatment. This provides access to important application points and areas that would otherwise be difficult to reach. It allows us to apply the protective materials precisely where they are needed, rather than treating only externally visible surfaces. Protective masking – precise application without unwanted overspray Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes. Before application, the entire vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other components that must not come into contact with the protective products. This extensive preparation enables controlled application and prevents unwanted contamination or interference with sensitive components. Mike Sanders Corrosion Protection Grease – lasting creeping action inside cavities The key advantage: the corrosion protection grease remains capable of creeping into narrow gaps and panel seams, even after application. Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material deep inside the ladder chassis and other vehicle cavities. The grease forms a protective film on the treated metal surfaces. Thanks to its temperature-dependent creeping properties, it continues to spread over time and can penetrate welded seams, overlapping panels and extremely narrow gaps. How it protects: The grease film creates a barrier between the metal, moisture and oxygen. Unlike rigid coatings, it remains flexible and can continue to provide protection even when the material expands and contracts due to temperature changes. TimeMAX underbody protection – protection against moisture, dirt and stone chips The underbody is exposed to particularly demanding conditions and therefore requires a suitably durable protective coating. Stone chips, dirt, road spray and road salt can damage or gradually wear away the factory-applied protective coating. Corrosion can then begin on exposed metal surfaces. We use high-quality TimeMAX underbody protection across the entire underbody area to be treated. The coating forms a protective barrier against corrosion-promoting environmental influences and the typical stresses of both road and off-road driving. It is the combination that makes the difference: TimeMAX protects the external underbody surfaces, while Mike Sanders is particularly effective inside enclosed cavities and narrow gaps. Normfest Protector Wax – additional protection in selected areas We also use Normfest Protector Wax in selected areas to complement the overall corrosion protection treatment. This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film on the treated metal surfaces. It is applied wherever its material properties are particularly suitable for the specific area. In this way, the different protection systems complement one another to create a corrosion protection treatment tailored to the vehicle. Endoscopic inspection – checking cavities before and after treatment Hard-to-reach areas should also be inspected – not just the visible surfaces. Before treatment, we examine accessible cavities using an endoscope. This allows us to assess the condition of internal surfaces and identify possible rust spots. Following treatment, another endoscopic visual inspection is carried out. This enables us to check the application and distribution of the corrosion protection material in the areas that can be inspected. Reassembly and cleaning – completing the treatment properly The complete package also includes professionally restoring the vehicle to its assembled condition after treatment. Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components. Finally, the areas affected during the work are cleaned. This completes the comprehensive corrosion protection treatment. Vehicle condition and possible additional work The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage. If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle. Mike Sanders treatment can also be worthwhile for older vehicles with existing rust. Further corrosion can be stopped by shielding the affected metal surfaces from oxygen, provided that the corroded areas are completely covered and sufficiently sealed by the protective material. Careful preparation of the affected areas is essential. Booking an appointment and treatment duration Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany. Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich. When placing your order, please select the wheelbase of your Land Rover Defender and provide your telephone number so that we can arrange an appointment. A member of our team will contact you using the telephone number provided to schedule your visit. Alternatively, you can contact us first on +49 9181 466 644 to arrange an appointment before ordering the service. The extensive treatment of the entire underbody, including the comprehensive masking required to protect the rest of the vehicle from overspray, normally takes 2–3 days.
Prices incl. VAT;
Professionelle Montage für Seilwindenbundles Montagepauschale für die Nakatanenga Seilwindenbundle in unserem Hause. Sonderwünsche (Remote-Windenschalter, abgesetzt montierter Relaiskasten etc.) werden separat berechnet. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Flat rate for the installation of a differential lock For all Land Rover Defenders with Rover, P38, or Salisbury axles The flat rate applies to the installation of a differential lock on one axle (front or rear) For all Detroit TrueTrac or ATB Torsen differential locks The installation is carried out at the specified fixed price, regardless of the duration. Please note: The price refers only to the installation flat rate, the goods to be installed must be purchased separately. Please select the vehicle model and state your telephone number when ordering to arrange an appointment. Installation is only possible on site in Berg near Neumarkt (zip code: 92348).
Prices incl. VAT;
Einbau zum Fixpreis – Nakatanenga 160 Ah Doppelbatteriesystem für Land Rover Defender Pauschale für die Installation des Nakatanenga Doppelbatteriesystem 160 Ah für den Land Rover Defender in unserer Werkstatt. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Der Preis beinhaltet eine kurze Einweisung des Kunden. Bitte beachten Sie: Der hier genannte Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Die Montagepauschale bezieht sich auf eine seriennahe Montagesituation. Sollte hier durch technische Gegebenheiten oder spezielle Kundenwünsche ein besonderer Montageaufwand entstehen, greift die Pauschale nicht, es wird nach Aufwand abgerechnet - dies können wir jedoch erst dann entscheiden, wenn das Fahrzeug in unserer Werkstatt steht. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Pauschale für den Einbau der Nakatanenga Seitenstaubox für den Land Rover Defender 110 in unserem Haus Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte beachten Sie: Die Seitenstaubox kann nicht zusammen mit Eckenschützern montiert werden (unabhängig vom Hersteller)! Einzig Riffelecken können ggf. entsprechend zugeschnitten werden, um eine parallele Installation zu ermöglichen. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Professionelle Montage für Ladeluftkühler Pauschale für denb Einbau des größeren Ladeluftkühlers für LandRover Defender 90/110/130 Td4 und Td5. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben.Bitte wählen Sie aus, ob ihr Fahrzeug über eine Klimaanlage verfügt oder nicht und geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Installation flat rate for Scheelmann seats with or without seat heating, for Land Rover Defender with or without pre-equipped seat heating. Price for 1 seat. The installation effort differs significantly depending on whether the seat to be installed has seat heating or not and whether seats with seat heating were already installed in the vehicle. Please select the applicable variant. Please note: The price refers to the installation fee only, the product to be installed must be purchased separately. When ordering, please include your telephone number for the necessary appointment. The assembly is only possible on site in Berg bei Neumarkt (postal code: 92348).
Prices incl. VAT;
Professionelle Montage für Reserveradträger Montagepauschale für den Hecktür-Reserveradträger NARRTDEF-02 in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich. Hinweis zur Montagepauschale: Die angegebene Montagepauschale gilt ausschließlich für Standardfahrzeuge ohne zusätzliches Zubehör oder Sonderumbauten. Bitte beachten Sie, dass bei Fahrzeugen mit zusätzlichen Einbauten – wie beispielsweise Zusatztanks, Sonderverkleidungen oder anderen Komponenten, die vor der Montage demontiert oder entleert werden müssen – ein erhöhter Montageaufwand entsteht. In solchen Fällen kann die Montagepauschale abweichen. Sollte bei Ihrem Fahrzeug zusätzlicher Aufwand erforderlich sein, informieren wir Sie selbstverständlich vor Beginn der Arbeiten über mögliche Mehrkosten.
Prices incl. VAT;
Professional installation for raised standard air intakes (snorkels) Flat rate for the installation of a standard snorkel, all models, for Land Rover Defender 90/110/130, for Tdi, Td5 and Td4 engines. The installation of a snorkel that is flanged to the original location (right fender, side) is carried out at the specified fixed price, regardless of the duration. Please note: The price refers only to the installation flat rate; the goods to be installed must be purchased separately. When placing your order, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348).
Prices incl. VAT;
Pauschale für den Einbau des Kat-Ersatzrohr für LandRover Defender 90/110/130 wahlweise für 2.4 Td4 oder 2.5 Td5 Motoren. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben.Bitte wählen Sie das Fahrzeugmodell aus und geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Montagepauschale für die Nakatanenga CargoBear in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Professionelle Montage für Kardanwelle Pauschale für den Einbau der Kardanwelle mit zentriertem Doppelgelenk für Land Rover Tdi / Td5 / Td4 in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Professionelle Montage für Lenkungsdämpfer Pauschale für den Einbau und Inbetriebnahme des Trekfinder Lenkungsdämpfers in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Installation service for warm air ducts for ventilation plates for all models The installation of the warm air duct is carried out at the specified fixed price, regardless of the duration. Please note: The price refers only to the installation flat rate, including the required plastic conduit. The ventilation plates must be purchased separately. Depending on whether you want to conduct heat from an external mobile heating box into the interior of the vehicle or from the interior of the vehicle via a permanently installed auxiliary heating system into, for example, a roof tent, you can purchase the following items from us: Ventilation plates for a wide range of vehicles can be found here. Waluflex warm air pipe End piece for Waluflex warm air hose Permanently installed auxiliary heaters can be found here. Mobile auxiliary heater boxes can be found here. Please note that built-in wind deflectors may need to be removed when installing a warm air duct through a ventilation grille. Due to the customisation of the ventilation plate, this is a special order that cannot be exchanged or returned. When ordering, please provide your telephone number so that we can arrange an appointment. Installation is only possible on site in Berg near Neumarkt (postcode: 92348). If you order the flat rate together with the appropriate ventilation plate, the item can also be shipped. If you already have ventilation plates, we can perform the installation service by appointment. Please note: The installation service only works with our universal (adjustable) ventilation plate if it is extended to its maximum length.
Prices incl. VAT;