Signal Lamps
LED signal lamps for Land Rover Defender, smoke grey The advantages of LEDs are well known: low power consumption, strong light output, vibration resistance and a long lifetime. In this smoke grey signal lamp set for the Land Rover Defender (Series III, Defender 90, Defender 110, Defender 130) the following LEDs are included: The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The set with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The set with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light Note that indicators must be orange by law. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied and also an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Nakatanenga LED brake light rear door for Land Rover Defender The 3rd brake light for the Land Rover Defender - as an easy-to-change plug'n'play LED light. Available colours (light colour is of course always red): Red (standard) Smoke grey (ideal for laminated windows) White (technical look) With E-mark and mounting material. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender.
Prices incl. VAT;
Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing.
Prices incl. VAT;
LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED rear fog light for Land Rover Defender, single With E-mark.Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lamps. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender until MY2016, smoke grey This high-quality LED tail light / brake light is for the Land Rover Defender.It has an E-mark, a diameter of 73mm and impresses with the unique smoke grey color.Suitable for Land Rover Defender until MY2016Ready to plug in with SuperSeal 2-pin plugIf the lamps on the existing vehicle are square at the rear, you need a 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used.Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender.Please note:The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires.Use only a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED signal lights Land Rover Defender: Reversing light LED reversing light for Land Rover Defender, single. With E-mark. Ready to plug in with SuperSeal 2-pin plug Suitable for Land Rover Defender up to MY2016 If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.
Prices incl. VAT;
LED indicators for the Land Rover Defender – various options for the front or rear in white, yellow and smoky grey High-quality LED indicators for the Land Rover Defender – available individually and suitable for various fitting positions. Depending on the version you require, you can choose between indicators for the front or rear, as well as the colours yellow, white and smoky grey. A large white NAS-style version is also available for the rear of the vehicle. NAS stands for North American Specifications and refers to the version of the Defender that was delivered to the North American market. A distinctive feature of these vehicles is the large, round turn signals with clear or white lenses, behind which, however, yellow (amber) LEDs or a yellow flashing light are visible. This combination creates the typical look of the original NAS Defenders and clearly sets them apart from the European versions with entirely yellow turn signal lenses. The LED indicator lights provide a modern look and highly visible illumination. All variants on offer carry an E-mark. Available versions: Item number Position Colour Diameter LR048188LED front Yellow ca. 75 mm XBD500010LED front White ca. 75 mm LR048188LEDSM front Smoky grey ca. 73 mm LR048187LED rear Yellow ca. 75 mm LR048187LEDCL rear White ca. 75 mm LR048187LEDSM rear Smoky grey ca. 73 mm AMR6527LEDCL rear White ca. 95 mm NAS Style Please select the version you require. The standard versions, with diameters of approximately 73 and 75 mm respectively, are suitable for the Land Rover Defender up to the 2016 model year. Large NAS-style version The white NAS-style LED indicator is ideal for retrofitting Land Rover Defender special models fitted with the large round NAS signal lights. The light has a diameter of approx. 95 mm and is supplied with mounting hardware. Please note that the NAS-style light is supplied without a connector plug. Fitting instructions: If square lights are currently fitted at the rear of the vehicle, one AMR3850 mounting base is generally required per light for conversion to round signal lights. In most cases, the existing original drill holes can be used. For standard LED indicators with a diameter of approx. 73 or 75 mm, our four-pin indicator relay is recommended or required. This also allows the flashing speed to be adjusted individually. The fixing screws must only be tightened by hand. If the screws are tightened too much, the plastic housing may crack. Such damage could allow water to penetrate the lights, which are otherwise watertight. For installation, use only a screwdriver and not a cordless screwdriver. Contents: 1 LED indicator in the selected version.
Prices incl. VAT;
Reliable LED parking light for Land Rover Defender - durable & certified This high-quality LED position light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the position light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
LED parking light in white for Land Rover Defender - Signal light White LED parking light for Land Rover Defender, single.with E-approval mark and fittings Also have a look at our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round LED lamps. As a rule, the original drill holes can be used. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
LED tail light for Land Rover Defender - discreet smoke look & tested This high-quality LED tail light / brake light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
LED tail light / brake light for Land Rover Defender, red E-markedPlease also see our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
LED signal lights Land Rover Defender up to MY2016: tail light / brake light, white LED brake light for Land Rover Defender in white, single.With E-mark.Suitable for Land Rover Defender up to MY2016If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round lights. As a rule, the original drill holes can then be used.Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover DefenderPlease note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights.Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Our LED licence plate light for Land Rover Defender 90/110/130 looks like the original item with all the benefits of LED technology: whiter and brighter than halogen bulbs little current drain (only 0.5 W), generates little heat insensitive to vibrations, especially interesting for diesel powered cars! superior longevity large voltage range - 9-33 V The light is E-marked for legal use (corresponding to ECE regulation no. 4). It's water and dustresistant to IP67 and is fitted using the existing M5 screws. All fittign material is supplied, so fitting only takes a few minutes.
Prices incl. VAT;
Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.
Prices incl. VAT;
See & Be Seen: Robust Signal Lights for Offroad & 4x4
Meta Description (Suggestion): Discover robust LED signal lights (turn signals, tail lights & more) for Offroad/4x4 at Nakatanenga. Enhance visibility & safety off-road. Browse now!
Clear Signals, Even When Things Get Dirty
Whether you're turning in dense forest, driving in a dusty convoy, or need to make yourself noticeable in adverse conditions – clear and reliable signals are absolutely essential for off-road use. Standard vehicle lights are often not built for the tough conditions off the beaten path: a branch here, a water crossing there, and suddenly a turn signal fails or the tail light is covered in mud and barely visible. With the robust signal lights from Nakatanenga, you ensure that you're always clearly seen and can clearly communicate your intentions – for your safety and that of others.
Why Special Offroad Signal Lights Are Important for You
Normal lights are often compromises. Our selection of signal lights for off-road vehicles and 4x4s is specifically tailored to your demands:
- Maximum Visibility: Especially in dust, fog, rain, or mud, your turn signals, tail and brake lights, and position lights must be bright and clearly visible. Many of our models use powerful LED technology that ensures clear signals even in poor visibility conditions.
- Extreme Durability: Your signal lights have to endure a lot. Our products are built for it: Impact-resistant housings, durable lenses (often made of polycarbonate), and high protection against water and dust (look for IP ratings) ensure your lights keep working even after tough use.
- Durable LED Technology: Forget burnt-out bulbs at the worst possible moment! LED signal lights are not only brighter and more energy-efficient but also extremely long-lasting and resistant to vibrations – perfect for the bumpy daily life off-road.
Variety for Every Purpose: We offer you a wide range:
- Turn Signals (Indicators): As a robust replacement or upgrade for original parts.
- Tail Lights & Brake Lights: Often as combined units, for clear signals to the rear.
- Position Lights (Marker Lights): So your vehicle is easily perceived in the dark.
- Warning Lights (Beacons/Strobes): For securing work sites or during special transports (note approval regulations!).
- Licence Plate Lights: To keep your number plate legible even when dirty.
- Easy Replacement & Approval: Many of our signal lights are designed as direct replacements for original parts or are easy to retrofit. Look for products with an E-mark if you want to use them legally within the scope of road traffic regulations (like the StVZO).
Your Next Step
At Nakatanenga, you'll find a carefully curated selection of signal lights from proven manufacturers who know what off-road drivers need. Whether you need to replace a faulty turn signal, want to upgrade to bright LED tail lights, or are looking for an additional warning light – you'll find it here.
Ensure clear signals and maximum safety! Discover our robust and reliable signal lights for your off-road vehicle now. Find turn signals, tail lights, and more that won't let you down. If you have questions about selection or compatibility, the Nakatanenga team is, of course, happy to help!
