TLC PRO Air Compressor Kit Viair Part No. 42046 – 150 PSI / 2.62 CFM The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35”. The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. The TLC series is designed not only for off-road riders but also for cyclists. Thanks to the valve adapters supplied and the small integrated pressure reservoirs on the compressors, it is particularly well suited for fitting tubeless bicycle tyres. SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 150 PSI Max. Amp Draw: 30-Amps Ingress Protection Rating: IP54 Dimensions: 10.87″L x 5.83″W x 7.48″H Net Weight: 11.80 lbs. Power Cord Length: 8 ft. Air Hose Length: 30 ft. * For 12V Only. FEATURES: Shop-Style Inflator with 160 PSI Gauge Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose Blow Gun Extruded Aluminum Air Tank 2-Pin SAE Connection with Battery Terminal and Clamp Options 40-Amp Inline Fuse Holder Vibration-Resistant Diamond-Plate Sand Tray Deluxe Carry Bag  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2 Bar – 0-50 PSI/ 0-3,4 Bar  0-20 PSI/0-1,3 Bar – 0-40 PSI/0-2,7 Bar  25mm - 5 sec. 10 sec.  35mm - 3 sec. 6 sec.  2.0″  - 5 sec. 12 sec.  28mm - 7 sec 12 sec.  38mm - 3 sec. 7 sec.  2.3″  - 6 sec. 15 sec.  30mm - 8 sec. 14 sec.  42mm - 4 sec. 9 sec.  2.6″  - 7 sec. 17 sec.  32mm - 10 sec. K.A.  45mm - 4 sec. 10 sec  3.0″  - 9 sec. 19 sec. FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 00 sec. (± 10 sec.)15 to 30 PSI 1 min. 35 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 4 min. 20 sec. (± 10 sec.)15 to 30 PSI 2 min. 05 sec. (± 05 sec.)35″ X 12.5″ 0 to 30 PSI 5 min. 20 sec. (± 15 sec.)15 to 30 PSI 2 min. 45 sec. (± 05 sec.)* Tolerances (±) define a range within which actual performance may fall. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions.  

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! The VIAIR 300P SXS Edition is based on the tried-and-tested, popular VIAIR 300P, but has been specially enhanced for use on side-by-side vehicles, ATVs, UTVs and quads. With additional features such as 2-pin SAE connectors, matching connection accessories and a customised carry bag, this set is particularly practical for off-road, leisure and work applications away from tarmac roads. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

TLC PLUS Automatic Portable Compresso Viair Part No. 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance ultra compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. The TLC series is designed not only for off-road riders but also for cyclists. Thanks to the valve adapters supplied and the small integrated pressure reservoirs on the compressors, it is particularly well suited for fitting tubeless bicycle tyres. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering.