Das könnte Sie auch interessieren
Plate for mounting a CB radio antenna on the air intake (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary. Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material
Prices incl. VAT;
Ähnliche Artikel
The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
Radio 90 CB antenna for fixed mounting Technical data: Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.
Prices incl. VAT;
Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.
Prices incl. VAT;
Permanently good reception with the CB fixed mounting antenna The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
Albrecht AE 6110 - Mini CB radio
€100.80
Prices incl. VAT; / Parcel shipping
Delivery time 5-10 working days
Mini CB radio with microphone AE6110 from Albrecht
The ALBRECHT AE 6110 has all the essential functions that you need. The highlight: With a width of only 10 cm and a height of 2.5 cm, it can easily be accommodated even in the smallest of spaces. With its die-cast housing, it is very stable.New: with integrated VOX function for hands-free speaking in the vehicle
Properties:
- All European CB standards
- S-meter, 6-level
- LED indicators for RX and TX
- VOX hands-free function
- Receiving sensitivity adjustable (RF gain)
- Channel 9/19 direct selection button (EMG)
- Die cast housing
- 4 watt AM / FM
- Automatic squelch (ASQ), adjustable in 9 levels
Further equipment features:
- Channel selection buttons on the microphone
- Channel search (scan)
- Keylock
- Socket for external speaker
Technical specifications:
Dimensions: 102 x 100 x 25 mm³
Weight: 450 g
Supply voltage: 13.2 V.
Power consumption: 2 A max.
Operating temperature range: -20 to +50 ° C
Antenna input: UHF, SO-239
Frequency error: <+/- 300 Hz
Transmission power: 4 watts
Interference transmissions: <4 nW (-54 dBm)
Adjacent channel power: <20 µW
FM frequency deviation: <1.9 kHz
AM modulation depth: <90%
Reception sensitivity: better than 1 μV (20 dB SINAD)
Mirror selection: 70 dB
Adjacent channel suppression: 60 dB
Audio output: 1 watt into 8 ohms
Frequency response: 300-3000 Hz
Conversion option for licensed amateur radio operators:
10 m amateur radio band, 400 channel mode: 25,610-30,105 MHz, 8 watts
Scope of delivery: AE 6110 CB radio, microphone with up / down buttons, microphone holder, mounting bracket with screws, instructions