USB socket for Land Rover Defender Td5, Td4, Tdci
USB socket suitable for Land Rover switch openings - USB 3.0 The Land Rover USB socket fits into the factory switch openings on the Defender Td5 (2002-2006) & Tdci/Td4 (2007-2016). The Land Rover USB socket is designed to complement the original Land Rover switch design.To ensure your Defender dashboard maintains a factory appearance, the outlet is equipped with green backlighting. Each Land Rover USB comes with a mini harness to allow for easy two-wire installation.A multi-plug plugs directly into the back of the USB socket for easy removal. The included mini harness comes with a pre-wired inline fuse, so installation requires nothing more than the ignition supply and ground/earth connections. The Land Rover USB socket also fits into the openings in the Freelander 1, Discovery 2 & 'Soft-Dash' Classic Range Rover. Puma Pod II and all Puma double DIN console switch relocation panels are suitable. USB 3.0 Scope of delivery: 1pc USB socket1pcs Mounting Instructions Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;
LED signal lights Land Rover Defender until MY2016: turn signal, front, yellow
LED signal lights Land Rover Defender up to MY2016: Indicators, front, amber Front LED indicators for Land Rover Defender in yellow, single. With E-mark. Suitable for Land Rover Defender up to MY2016. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round indicator lights. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender. For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
LED signal lights Land Rover Defender until MY2016: tail light / brake light, white
LED signal lights Land Rover Defender up to MY2016: tail light / brake light, white LED brake light for Land Rover Defender in white, single.With E-mark.Suitable for Land Rover Defender up to MY2016If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round lights. As a rule, the original drill holes can then be used.Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover DefenderPlease note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights.Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC Chequer plate wing top protection for all Land Rover Defender TD4 / Puma 90/110/130 MY 2007-2016. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. CLASSIC version. Please note: the protective covers for Defender MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;
Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)
Defender CB antenna mount – air intake mount, magnetic or fixed This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material
Prices incl. VAT;
Defender door hinge assembly kit, stainless steel (black)
Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.
Prices incl. VAT;
Nakatanenga Sill Guard Protectors for Land Rover Defender, Chequer Plate
Sill protectors made of checker plate for Land Rover Defender in various designs The 3 mm thick, robust sill protectors made of checker plate prevent damage to the sill area of your Land Rover Defender and also emphasise the rustic appearance of the vehicle.The Nakatanenga door sill protectors are currently available for the Land Rover Defender 90, the 110 Station Wagon and the 130 Crew Cab. They are supplied in pairs, including the rivets required for fitting. Sill protectors made of checker plate, material thickness 3 mm, available for different vehicle versions.Please select the required vehicle model and the desired colour of the door sill protectors.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)You can find loading area rails for the Land Rover Defender 90 and 110 here.
Prices incl. VAT;
Trekfinder Wheel Spacers for Land Rover Defender 90/110/130, 46mm per axle
Lightweight aluminium wheel spacers (46 mm) - set for front & rear axle, with parts certificate 46 mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. Defender 130 rear max load weight needs to be lowered to 2 tonnes. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70% lighter than ordinare spacers made from steel.Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 46 mm per axle (2x 23 mm) material: aluminium alloy colour: black alignment: center alignment vehicles: Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic Please note: With the rear axle unloaded, the wheel spacer can also be used for the Land Rover Defender 130. These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate.
Prices incl. VAT;
LED Position light for Land Rover Defender, smoke grey
Reliable LED parking light for Land Rover Defender - durable & certified This high-quality LED position light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the position light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Wiper relay for Land Rover Defender
Windscreen wiper relay - Land Rover Defender Replacement relay for the windscreen wiper of the Land Rover Defender. Suitable for various model years, ensures reliable control of the wiper intervals. Simple replacement, close to OEM design.
Prices incl. VAT;
Scheelmann folding console for Land Rover Defender
Scheelmann folding console for Land Rover Defender The Scheelmann seat console is suitable for all Land Rover Defender 90/110/130 series Td4, Td5 and Tdi. It can be used for the passenger or driver side of the vehicle and is foldable to allow easy access to the battery. It also serves as a seat rail extension. A TÜV certificate (in conjunction with a Scheelmann seat) is included.Scope of delivery: one console running rails fixing material TÜV certificate
Prices incl. VAT;
EGR Bypass Kit for Land Rover Defender Td5
Spare pipe EGR modulator with accessories Our EGR bypass kit is milled out of one solid block of aluminium and contains the replacement pipe, sealing gasket, EGR blanking plate and all necessary fittings, thus providing top quality at a very competitive price. The result of fitting this kit is increaed power and are notable reduction of turbo lag as well as much cleaner engine as the exhaust fumes are not recirculated into the engine again. Racing accessory, not road-legal in Germany. For Land Rover Defender Td5 & Discovery TD5 Image similar
Prices incl. VAT;
Repair plate rear tub, 3 pieces, Defender 110 Td4, Td5 and TDI
Repair panel rear sump for Defender 110 Td4, Td5 and Tdi Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets. For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way. Please select: Complete set 3 pieces consisting of: Repair plate main part and 2x corner parts 2-piece set consisting of: 2x corner pieces
Prices incl. VAT;
Silver Heritage Headlight plates (with inlet gills) in aluminium, powder coated
Heritage style headlight surrounds aluminium - silver Matching to our silver Heritage grille: Silver headlight plates with inlet gills and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, silver powder coated 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130.
Prices incl. VAT;
Nakatanenga folding console for Land Rover Defender 90/110/130
Practical folding console for Land Rover Defender The vehicle seat in the Land Rover Defender can be easily folded backwards with this folding console, thus providing access to the battery and the electrical components located under the seat. All seats with 405 mm track spacing, e.g. Scheelmann, König, Recaro etc., can be fitted. The original running rails of the Defender are still used and retain their function without restriction. They are attached to the original points on the running rails using the mounting kit supplied. The folding console is also a seat rail extension by approx. 35 mm, a combination with our seat rail extensions is not advisable (although technically feasible). These seat consoles are made of ceramic-blasted stainless steel. The height of the console is 31 mm at the front and 61 mm at the rear.Suitable for: Land Rover Defender 90/110/130 Scope of delivery: 1 set for 1 seat
Prices incl. VAT;
Licence plate light with camera for Land Rover Defender until 2016
Licence plate light with integrated reversing camera Licence plate light with integrated reversing camera. They replace the unsightly original plastic part and offer more than just an additional eye-catcher on the vehicle. The bright LED lighting ideally illuminates the number plate in all weather conditions and ensures a long service life.The integrated reversing camera provides the best view to the rear and thus prevents damage when reversing. So you have a huge relief AND a cool gimmmik with minimal effort.Product details: made of high-strength aluminium corrosion & UV resistant coating camera resolution 480-520 TV camera with day and night vision function Camera is tiltable Camera viewing angle is 120° - 140° horizontal angle Camera is IP67 certified (dust and waterproof) Scope of delivery: LED number plate light Rear view camera Seal and fit kit 6m long chinch video cable 1,5m long 12V power cable The original holes for the number plate lighting are used. On some models, however, the lighting may protrude slightly, in which case 2 additional holes could be placed so that the lighting rests on top.Please note that NO monitor is included in the scope of delivery!All monitors with a cinch connection can be used.
Prices incl. VAT;
Nakatanenga side indicator protection - Typ Q - pair
Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-
Prices incl. VAT;
Stainless Steel Braided Brake Lines for Land Rover Discovery II
Braided steel brake lines for Land Rover Discovery II - improved braking performance & 50 mm longer, incl. parts certificate After having been proven and tested for many years, stainless steel brake hoses are now becoming accepted in the off-road scene. The advantages the steel braided PTFE hoses have over customary rubber brake hoses are manifold: no expansion of brake lines under braking no expansion due to hot brake fluid under frequent braking very precise brake response no loss of braking power, resulting in shorter stopping distance precise modulation of braking power improved protection from damage through stones, branches, etc., especially important when off-road driving individually tested by manufacturer at 400 bar pressure Our brake lines are 50 mm longer than the original hoses and thus suitable for larger axle travel, e.g. for lifted vehicles. They are sufficient for vehicle lifting kits upt to 90mm. If you require different lengths, please contact us. These brake lines come with a TUV certificate of approval. In Germany such changes to the brake lines have to be TUV registered for your vehicle. We recommend to check brake fluid level and if necessary a replacement of the brake fluid. The hydraulic system has to be bled after fitting new brake lines. Any work on the braking system should always be carried out by a trained mechanic! See illustration
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006 Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to model year 2006. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. These chequer plates are rounded at the front and side to follow the shape of the front wing. For vehicles up to MY 2006 the protection plates include the antenna, for later models, the plates are shorther. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;
Terrafirma All Terrain Shock Absorber, Front Axle
Terrafirma All Terrain Shock Absorber, Front Axle Shock absorber, front axle, for Defender 90/110/130, Discovery 1, Range Rover Classic.Scope of delivery: 1 shock absorber
Prices incl. VAT;
A-Frame Ball Joint, 45° operating range, for Land Rover Defender, Discovery and RRC
A-frame ball joint with 45° operating range for improved rear axle articulation, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic. This A-frame ball joint replaces the standard ball joint and offers greatly improved articulation due to its operating range of 45° (as compared to ca. 30° for the OE part). This ball a-frame ball joint can be used with standard suspension or suspension lifts and also with cranked rear radius arms.
Prices incl. VAT;
Replacement O-ring for dust cap Heavy Duty wheel driver
Replacement O-RING FOR TF859 - Heavy Duty Drive Flange - Thin Type Replacement O-ring for the TF859 heavy duty flange from Terrafirma (galvanized thin type, from 1994). Manufacturer's warranty: approx. 1 year / approx. 20,000 km Suitable for:DEFENDER 1986 - 2006DEFENDER from 2007 DISCOVERY 1 1989 - 1998RANGE ROVER CLASSIC You can find the matching replacement dust cap in the store HERE.
Prices incl. VAT;
LED Signal Lights Land Rover Defender: Rear Fog Light 95mm, red. Ready to plug in!
LED rear fog light for Land Rover Defender, single With E-mark.Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lamps. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Door Hinge Set, all Defender, front and rear
Hinge solutions for front, centre and rear doors - Defender & Series Door hinge set for front doors for all Defender / Series III Door hinge set for rear door for all Defender, Series II & III Door Hinge Set for Middle (2nd) Door Row for all Defender Steel fixing bolt set included in delivery
Prices incl. VAT;
Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender
Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Nakatanenga Hi-Lift bracket for Land Rover Defender 110
HiLift jacking bracket for Defender 110 Station Wagon Whether off-road or in normal operation, a good ratchet jack like the Hi-Lift is unbeatable in many situations, not only for recovery, but as a mobile replacement winch, as a spreading tool and much more. The only disadvantage: Hi-Lift, JackAll and other identical jacks take up a lot of space with their non-dismountable length of usually 48"/122 cm and definitely do not fit under the driver's seat like the small OEM standard jacks. But fortunately there are also other seats in the Defender 110 Station Wagon. The cavity under the rear seat bench offers the perfect space for Hi-Lift, Hi-Lift X-treme, JackAll & Co with a length of 48"/122 cm. This means that the Jack can be reached quickly if necessary and doesn't get in the way in the slightest when you don't need it. Simply fold down the rear seat and you have easy access to the Hi-Lift. In addition, the interior of the van naturally also offers the best protection against rust and dirt. And to prevent the jack from slipping, hitting or rattling while riding, we have a genuine Nakatanenga solution: a high-quality stainless steel rail that is simply screwed onto the seat bench bearings and holds the jack firmly and rattle-free between two easy-grip knurled nuts and four rubber pads. Incidentally, we also include a yellow transport lock with every steel rail to ensure that the lever tube also fits securely and silently. Even though the bracket is designed to fit the Defender 110 rear bench perfectly, it can of course also be mounted on any other suitable surface, in the Defender, in other 4x4s, on the inside of the loading area or on the outside of the roof rack, for example. Supplied without Hi-Lift Also suitable for JackAll 122 cm and other identical derivative products.
Prices incl. VAT;
CargoBear closure carrier Defender until MY2016
Nakatanenga CargoBear end plate Defender Beautiful and handy, this CargoBear end plate for the Defender. Beautiful because it adds the finishing touch to the design of the already extremely attractive black bear. Particularly on the short Landy, with the roof rack configuration of three crossbars and two perforated board surfaces, the wind deflector and end panel round off the look perfectly on both sides and, above all, provide the ideal roof rack length for the vehicle. And then, as already mentioned, the end panel is also very handy because we have integrated a handle on both sides, which makes climbing up to the roof level much easier and safer. The end module also extends the usable loading area by another 9 cm and offers additional space for attaching work LEDs, fastenings, lashing points and the like. Above all, however, it can protect the rear edge of the roof when loading and unloading the bear - depending on the CargoBear configuration and vehicle. As always in our modular CargoBear system, the material is a black, powder-coated aluminum-magnesium alloy with a non-slip perforated plate structure. The end plate is supplied with all the necessary fastening material. Material: Aluminum-magnesium alloy (AlMg3), high-quality powder-coated Color: Deep black RAL 9005 Width: 1,450 mm Suitable for all CargoBear 1 + 2 roof racks.
Prices incl. VAT;
Nut Lockut 10 pieces pack
Expanding & plastic nuts for Land Rover Expanding nuts / plastic nuts for the body of Land Rover. Please note that the color may vary.
Prices incl. VAT;
Extended wheelarches for Land Rover Defender
Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!
Prices incl. VAT;
Recovery Shackle (rear) for Land Rover Defender Td5 and Td4
Recovery Shackle (rear) for Land Rover Defender Td5 and Td4 Heavy-duty recovery shackle for Land Lover Defender, made from steel. Mounts to the rear bumper. Surface: zinc primer, black powder-coatedHolepattern: 85x45 mmMax. load: 10 t Incl. heavy-duty bolt with safety pinIncl. hardware
Prices incl. VAT;
LOF Clutches EXTREMEspec improved MT82 intermediate shaft for TD4
THE ALL NEW EXTREMEspec MT82 output shaft kit from LOF On Defenders with 2.4 and 2.2 Tdci Puma engines, it is a very common fault that the coupling shaft between the MT82 gearbox and the Lt230 transfer box wears out and fails! This is due to the shaft’s original two-part design with a dry splined coupling. Without grease, the grinding of metal on metal wears down the spines and eventually you’ll notice first a clunking noise and ultimately a total loss of drive. Solutions with specially greased OEM parts were unable to fix the problem, so the specialists at LOF have come up with a solid one-piece design for the coupling shaft to replace the splined coupling. LOF is so convinced by this EXTREMEspec innovation, that they offer a lifelong warranty on the component. Description: 1x LOF solid output shaft, heat treated and made from 300M material 1x M12 long cap head draw bolt 1x Nord lock washer set (M12) 1x special retaining bolt adapter 1x genuine Coretco MT82 rear drive shaft seal 1x M22 grub screw slide hammer adapter (DO NOT INSTALL WITH THE SHAFT. KEEP IN TOOLBOX)
Prices incl. VAT;
Lock set with steering wheel lock, 3 cylinders and 2 keys for Defender TD4
Steering column lock with door lock cylinders complete set Defender Steering column lock with three door lock cylinders and two keys for Land Rover Defender from VIN 2A622424 model year 2002.Note: The scope of delivery does not include shear bolts!Shear bolts can be found here in our store.
Prices incl. VAT;
Land Rover Defender Zubehör, Discovery und Range Rover Classic Zubehör
Der Defender hat eine Seele, sagen viele. Vielleicht stimmt das, denn manchmal hat man wirklich diesen Eindruck. Er bringt einen überall hin, auch dorthin, wo andere längst aufgeben. Dafür braucht er Zuwendung, Werkzeug und Geduld. Er ruckelt, macht Geräusche und nimmt es mit Perfektion nicht so genau. Aber wer ihn kennt, weiß: genau das ist sein Charme. Es gibt kaum etwas Schöneres, als an diesem Stück britischer Ingenieurskunst selbst zu schrauben oder, wenn's mit dem Schrauben hapert, wenigstens mit Fachwissen zu glänzen.
Für alle, die lieber selber schrauben oder montieren lassen, bietet der Nakatanenga-Shop eine Schatzkiste voller Defender-Zubehör und Defender-Ersatzteile. Hier findet sich alles, was den alten Briten wieder auf Vordermann bringt oder ihn zum echten Reisefahrzeug macht.
Von Stoßstange bis Schnorchel - das richtige Defender Zubehör für unterwegs
Wer einen Defender in ein Reisefahrzeug umbauen möchte, der braucht mehr als gute Laune und einen vollen Tank. Eine Seilwindenstoßstange, nicht, weil man sich selbst festgefahren hätte, nein, natürlich nur, um die anderen rauszuziehen. Wir empfehlen unsere Nakatanenga Seilwinden-Stoßstange für den Defender wahlweise im Bundle mit Seilwinden von Horntools oder Superwinch, optional mit oder ohne Fernscheinwerfer.
Aber es gibt auch Momente, da hilft kein Gebet, nur eine gute Bergung. Mit Bergeösen, Hecktraversen-Verstärkungen und Bergeboards bleibt man auch dann souverän, wenn der Boden meint, ein Abenteuer draus machen zu müssen. Alles robust, erprobt und bereit für den Ernstfall.
Wer längere Strecken abseits der Zivilisation plant, rüstet am besten gleich mit einem Zusatztank in 56 Liter oder 66 Liter auf, während der Defender-Unterfahrschutz dafür sorgt, dass spitze Steine, Wurzeln oder neugierige Felsen keine bleibenden Erinnerungen hinterlassen. Rockslider schützen die Flanken. Findet ihr alles bei uns in der Unterkategorie Schutz.
Der Schnorchel für den Defender bzw. die erhöhte Luftansaugung ist natürlich Pflicht für alle, die in die Wüste wollen oder durchs Wasser müssen, wobei auch Hamburger Pfützen manchmal verdächtig tief aussehen können. Gibt es für Td4, Td5 und Tdi in verschiedenen Ausführungen für Defender mit oder ohne Überrollkäfig.
Defender-Fahrwerk, Felgen und Reifen
Kein Abenteuer ohne ordentliches Fahrwerk. Ein Defender-Fahrwerk ist keine reine Geschmacksfrage, sondern hängt davon ab, wofür der Wagen eingesetzt wird. Egal ob 90er, 110er oder 130er: Es gibt Fahrwerke für jeden Zweck, vom Familien-Daily-Driver bis zum voll beladenen Fernreisemobil. Für den richtigen Offroad-Look gesellen sich dazu beispielsweise Stahlfelgen wie unsere klassische ANR-Felge, die Wolf-Felge oder ebenso robuste Dotz Dakar.
Und wer keine Lust auf die Suche nach einer Werkstatt hat, die Defender-Reifen vernünftig wuchten kann, nimmt gleich komplett montierte Reifen. Alles zum Thema Reifen und Felgen findet ihr hier.
Innenleben mit Charakter - Sportsitze für den Defender
Wer Kilometer frisst, sollte bequem sitzen. Mit neuen Sitz-Polsterungen lässt sich der alte Charme der Defender-Sitze bewahren, Sportsitze für den Defender bringen modernen Halt ins Abenteuer, und passende Sitzbezüge schonen das Material oder verstecken die Spuren vergangener Expeditionen. Richtig klassisch wird es dann mit den passenden Lenkrädern für den Defender.
Und dann gibt's da noch das Defender-Zubehör, von dem man sich fragt, warum Land Rover das nicht einfach schon von Werk aus eingebaut hat. Türgriffe aus Leder, ein Handschuhfach, ein Haltegriff an der A-Säule, damit der Einstieg selbst nicht jedes Mal wie eine kleine Expedition wirkt.
Sitzschienenverlängerungen, weil britische Ingenieure offenbar keine langen Beine kannten. Eine zweifarbige Innenraumleuchte, ein Ablagefach hinter der Cubbybox und natürlich der Hecktürdämpfer, der verhindert, dass einem die Tür ins Kreuz fällt, wenn der Wagen schräg steht.
Doppelbatterie-System, Elektrik und Licht - Strom, wo er gebraucht wird
Egal, ob Standheizung, Laptop, Kühlbox oder Handy: Auf Reisen braucht man Strom. Deshalb ist eine der ersten Umbauten, die ein Defender bekommt, oft ein Doppelbatterie-System. Unser Doppelbatterie-System für den Defender mit Edelstahlhalterung bietet Platz für zwei Banner 80Ah-Batterien, beinhaltet den Kabelsatz und ein Trennrelais auf Wunsch gibt es einen Batterie-Monitor dazu. Perfekt dazu passt das Solarpanel auf der Motorhaube passend für Td5 und Td4.
Im Bereich Beleuchtung reicht das Spektrum 7-Zoll-Scheinwerfern, LED-Signalleuchten bis zu Lightbars von Osram und Vision-X, dazu gibt es sogar noch einen passenden Lampenbügel. Rückfahrscheinwerfer, Innenraumleuchten und passende oder eine Kennzeichenbeleuchtung mit Kamera sind ebenfalls Teil des Sortiments.
Dachträger für den Defender, Boxen und Ordnung im Chaos
Der CargoBear-Dachträger für den Defender ist fast zu schön, um ihn nur mit Ausrüstung zu beladen. Flach, begehbar, mit Durchzügen und wie gemacht für unsere Roof-Lodge-Dachzelte, befestigt über ein Schnellmontagesystem, das auch für verschiedene andere Dachzelte passt. Perfektes Zubehör für den Defender-Dachträger sind unsere Outdoor-Dusche, die Nakatanenga Shower Tube, und die Roof Lodge Evolution 2 Markisen. Oben auf den Dachträger passen die Nakatanenga Transportboxen und die große Alubox mit 198 Litern Volumen, genügend Platz für Tisch, Stühle und noch das eine oder andere „das-könnte-man-brauchen"-Teil.
Für alle, die noch mehr Stauraum brauchen, gibt's die unauffällige Kotflügelbox, Seitenstauboxen, das Wertsachenfach als Cubbybox-Erhöhung oder das Staufach im Fußraum. Der Tailgate Organizer mit MOLLE-Taschen schafft Ordnung am Heck, das Cargonetz unter dem Dachhimmel nutzt jeden Zentimeter, und die Fenstergitter mit MOLLE-System erweitern den Stauraum an den Seiten- und Heckfenstern.
Standheizung für den Defender
Eine Standheizung macht den Defender zum Winterreise-Fahrzeug, besonders elegant integriert mit der Cubbybox-Erhöhung. Wer noch warm duschen will, ergänzt das Ganze um ein Warmduscher-Kit. Alternativ wärmt die mobile Standheizung in der Alukiste auch das Dachzelt oder im Zweifel den Gartenpavillon.
Pflege, Wartung und Defender-Ersatzteile
Nach der Reise ist vor der Reise. Bremsen, Auspuff, Kardanwellen, wer weiß, wo der Dreck sitzt, weiß auch, wo geschmiert werden muss. In unserem Sortiment haben wir alle wichtigen Defender-Ersatzteile, von Radlagern, Luftfiltern über Auspuff, Getriebe bis hin zu ganzen Karosserieteilen wie komplett verzinkte Rahmen für Defender und Discovery. Ob kleiner Service oder große Restaurierung, alles, was der Land Rover Defender an Zubehör braucht, gibt's hier. Übrigens passen viele der Defender-Ersatzteile auch auf den Discovery I und II und auf den Range Rover Classic. Im Zweifel einfach bei unserer Service-Hotline nachfragen.
Und wer lieber Profis ranlässt, kann sich auf die hauseigene Werkstatt verlassen: spezialisiert auf Defender, mit Einbauten von Zusatztank oder Standheizung über Doppelbatterie-System bis zur Differenzialsperre. Wir übernehmen aber auch komplette Restaurationsprojekte und die Überholung von Defender-Getriebe oder Motor.
Nakatanenga - der Online-Shop für Defender-Zubehör und Defender-Ersatzteile
Der Defender ist kein Auto für Perfektionisten. Er ist ein rollendes Abenteuer, ein fahrbares Bastelprojekt und ein bisschen Wahnsinn auf Rädern, das richtige Defender-Zubehör und die passenden Defender-Ersatzteilen vorausgesetzt. Aber dafür bekommt man etwas, das kein modernes SUV bieten kann: ehrliche Mechanik, echte Geschichten und das gute Gefühl, dass man notfalls selbst alles wieder zum Laufen bringen kann.
- Alles für den Umbau, die Reparatur oder die Restauration des Defenders: Bei Nakatanenga gibt's Defender-Ersatzteile, Karosserieteile und Zubehör, das passt: von praktisch bis außergewöhnlich.
- Keine Lust selber am Defender zu schrauben? Einfach anrufen und Werkstatt-Termin vereinbaren. Wir haben uns auf das britische Kultfahrzeug spezialisiert. Vom einfachen Reifenwechsel bis hin zur kompletten Defender-Restauration ist alles möglich.
- Dachträger für den Defender gesucht? Einer, der nur wenig aufbaut und dabei richtig gut aussieht? Wir sagen: Unser CargoBear kann's.