Nakatanenga High Performance Intercooler for Land Rover Defender Td5 / Td4
Nakatanenga High Performance Intercooler for Land Rover Defender Td5 / Td4 The Nakatanenga high performance intercooler is manufactured to our specifications and is ideally suited for Land Rover Defender with Td5 and Td4 engines (2.2, 2.4 and 2.5 litres) as well as for vehicles that are frequently used in trailer operation. It can be used in vehicles with or without air conditioning. It is not suitable for the Land Rover Discovery!The all-aluminium construction not only keeps the weight of the intercooler low compared to other high-performance radiators, it also guarantees optimised heat dissipation. Due to the increased volume compared to the original intercooler, the cooling system now has much more reserves for driving at high temperatures, extremely low speeds, calling up full power or high trailer loads.The flow-optimised design of the radiator as well as its particularly good heat-dissipating coating also contribute to the excellent cooling performance - especially in connection with performance-enhanced engines, this is of essential importance.The cooling net has been specially optimised for off-road use - it is particularly robustly manufactured so that damage from small stones or branches is more than unlikely. It is made of extruded aluminium with soldered fins. The air boxes are made of cast aluminium instead of being welded from individual parts, which also increases the robustness of the cooler.Please select the engine version of your Land Rover Defender.
Prices incl. VAT;
Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side.
Snorkel for Defender 300 Tdi, Td5 and Td4 Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side. Material: aluminium, black powder coatedDiametre: 80 mmComes with cyclonic head and stainless fitting material for snorkel. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.
Prices incl. VAT;
Cross member, rear floor Defender 110 (Station Wagon, Crew Cab)
Cross member for Land Rover Defender In an ideal world, every part on the frame and underbody of a classic Landy would have come galvanized from the start. But of course, that didn’t happen at Land Rover, so corrosion in the substructure is one of the biggest enemies of classic Defenders, Discoveries and Range Rovers. Our hot-dip galvanized cross member is the perfect and durable replacement solution for corroded original parts. In 110 Defenders it sits under the second row of seats and not only secures the floor construction permanently, but also provides mounting points for sidebars, rock sliders, steps and many other attachments. Suitable for Defender 110 (MY until 2016) Station Wagon and Crew Cab as well as 130 Crew Cab (additional drill holes required). Please note: NOT suitable for a Defender 110 with 2nd row of seats from MY2007-2016
Prices incl. VAT;
Seat pad Land Rover Defender
Seat pad Land Rover Defender Many Landy critics bemoan the seat position in the Defender, the missing elbow room and the spartan original Land Rover seats. But that’s doing a disservice to the furniture from Solihull, especially the improved versions that were introduced in 2007. Even taller drivers, with seat rail extensions installed, can do mile after mile without problems for back and behind. So, if you’re restoring an old Defender or you put too much mileage on yours, it’s worth considering to refurbish the old seats instead of putting brand new ones in. As long as the seat covers are fine and only the foam cores have disintegrated, an upgrade with new seat foams can make a huge difference. This is classic DIY and pretty easy to do with our replacement foams for backrests and seat cushions. Simply remove the whole seat, take the backrest and seat cushion out, remove the covers and rip the old foam off the frame. The new foam cores can be fixed to the frame with standard spray adhesives. Then reverse the process and enjoy your firm new seats. The seat fits all Defender standard outer front seats up to 2016, the backrest for 2007 - 2016. Not suitable for special models.
Prices incl. VAT;
Land Rover Defender OEM auxiliary light switch
Perfect retrofit: switch for auxiliary headlights Original light switch for Land Rover Defender TD5 from MY 2002 and TD4 for auxuliary driving lamps, fits to exisiting mounting place, comes with required counterpart YPC10523 with electical pins to fit a cable. You can find a suitable relay here.
Prices incl. VAT;
Sun Visor Mirror for Land Rover Defender
Sun visor mirror for Land Rover Defender The self-adhesive make-up mirror for the standard sun visor of the Land Rover Defender 90/110/130 can be mounted on two different places of the sun visor - see pictures.The mirror is available for either the left or right side of the vehicle and is sold individually. Supplied without sun visor.
Prices incl. VAT;
Nakatanenga Headlight Guard for Land Rover Defender
Nakatanenga Headlight Protection Grille for Land Rover Defender Nakatanenga headlight guards for Land Rover Defender 90/110/130 both protect your headlights from mechanical impact (e.g. branches) and also improve the appearance adding the classic look to your vehicle. In addition, with more and more high-value LED headlights being fitted, they also serve as an effective theft protection when useing the supplied theft inhibiting mounting kit. The lamp guards are produced locally from stainless steel and are powder coated in a very durable black coat which can be further painted in any colour (e.g. your vehicle colour). Included in delivery: two light guards, theft inhibiting mounting kit We have tested the guards with the following lights and can confirm that they don't cast any annoying shadows: OEM Land Rover headlights clear glas headlights Truck-Lite 7" LED headlights Nolden 7" LED headlights Further modals are being tested. The Nakatanenga headlight guards can be combined with the original light covers or our heritage-style covers.
Prices incl. VAT;
LED signal lamps for Land Rover Defender, smoke grey
LED signal lamps for Land Rover Defender, smoke grey The advantages of LEDs are well known: low power consumption, strong light output, vibration resistance and a long lifetime. In this smoke grey signal lamp set for the Land Rover Defender (Series III, Defender 90, Defender 110, Defender 130) the following LEDs are included: The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The set with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The set with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light Note that indicators must be orange by law. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied and also an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Nakatanenga Molle bags
Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.
Prices incl. VAT;
Security Mounting Kit for Nakatanenga Window Grille
Optional safety mounting kit for the Nakatangena window grilles for the Land Rover Defender 90/110 Consisting of:Blind rivet insert nuts, safety torx screws and matching bit Kit for one window grille
Prices incl. VAT;
Window grille for Defender 90/110 SW for mounting on the inner lining, suitable for MOLLE system
Window grille for Defender 90/110 SW for mounting on the inner lining or door frame, suitable for MOLLE system If you plan to extend your off-road, work, expedition or camper vehicle’s storage capacities, you want to maximize on flexibility, economic use of space and safety. Every trip is different: snow on one day, sand or mud on another. Sometimes you’re out for a weekend, other times it’ll be months on and off the road. Always ready to quickly accommodate widely diverse tasks, a MOLLE-compatible storage system has the additional advantage that it’s never in the way, like chests, boxes or drawers so often are.To provide a great solution for your flexible storage needs, we have developed a perfectly fitting system of interior window grills made from powder-coated aluminum for Defenders 90 SW and 110 SW up to MY 2016. Using the included fastening materials, the grills are simply screwed into the interior trim of the cargo area windows and thereby function as an equally lightweight and sturdy MOLLE grid. MOLLE (MOdular Lightweight Load-carrying Equipment) is a system of bags, pouches, holders, holsters and all kinds of straps and other fasteners that can be tied or clipped into webbings or grids – in this case the window grill – ultimately creating a very flexible, lightweight and secure carrying system for all kinds of gear. In contrast to boxes, shelves or drawers nothing can fall, slide or fly around, you always have quick and easy access and the storage space required is only little more than the size of the equipment itself. It doesn’t get much more efficient than that.In addition, we also offer a wide variety of MOLLE-bags and pouches, MOLLE-compatible emergency and first aid kits, and all kinds of fasteners, from strap sets to quickfist clips for tools and other gear. In combination with the window grids, these accessories let you customize a safe, space-saving and lightweight storage system for all tasks and purposes. Material: Powder-coated aluminum, black. Available window grilles:1 x Rear Window (Fastening on door frame)2 x Rear Quarter Window (Fastening to interior trim)2x side window load compartment (Fastening to interior trim)Mounting material included Please note:The rear quarter windows are only suitable for Land Rover Defender TD4.MOLLE-bags, quickfists and other accessories depicted in the photos are NOT included in the delivery and must be ordered separately.
Prices incl. VAT;
License plate holder for NAWIBU winch bumper
License plate holder for NAWIBU winch bumper Our heavy duty Nakatanenga winching bumper for classic Defenders is the perfect mounting solution for winches. The entire winching unit stays well protected behind the bumper and the winching cable runs smoothly through the integrated winch window in the middle of the bumper. Normally, this is where the license plate is positioned and that brings us to the problem and our simultaneously elegant and quick solution. Our custom made number plate holder is simply screwed into the fastening holes of the winching window, making it possible to mount the number plate more or less in its usual position. The winch’s functionality is in no way restricted or impeded, of course. The number plate holder is made from aluminum and features a matte black powder coating (RAL9005) which perfectly matches the look of the winching bumper. Material: AluminumFinish: RAL9005 matte smooth
Prices incl. VAT;
Wheel nut Discovery II CLOSED rim with stainless steel cap -available here
Wheel nuts for Discovery II ZU rim - With stainless steel cap for optimum protection These specially developed wheel nuts are the perfect complement for the original Land Rover Discovery II ZU rims. They combine a precise fit with robust durability and are additionally equipped with a high-quality stainless steel cap - for a clean finish and optimum protection against dirt, salt and corrosion.
Prices incl. VAT;
TREKFINDER Damper for LANDROVER Defender 90 / 110 / 130 by KONI RAID - Front Axle
Maximum off-road control - TREKFINDER KONI RAID shock absorbers for Defender This TREKFINDER damper fits the Defender 90 / 110 / 130 Discovery 1 Range Rover Classic front axle by KONI Heavy Track RAID - suitable for vehicles with lifts up to +5 cm. This part is sold per piece.
Prices incl. VAT;
X-Trouser Door Trap for Land Rover Defender
X-Trouser Door Trap for Land Rover Defender Keeps your clothes from getting caught in the door catch of your Land Rover Defender 90/110/130, set of 2 pieces By its rounded design, the X-Trouses door catch prevents your clothes from getting caught in the sharp-edged original Defender door catch.
Prices incl. VAT;
ClipsKit-Big - Box with clips, plastic rivets, Counter bushes 280 pcs.
Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer
Prices incl. VAT;
Nakatanenga Type Q Lamp Guards for Fog and Reverse light, Pair
Lamp protection grille for fog light, reversing light Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)
Prices incl. VAT;
Nakatanenga Protective Grille Mudguard Indicator, for Land Rover Defender
Nakatanenga protection grille wing indicators, for Land Rover Defender The Nakatanenga protective grilles for the mudguard indicators of the Land Rover Defender 90/110/130 are on the one hand a protection of the headlights against mechanical damage (e.g. by branches), on the other hand a design element, which belongs to the classical optics of the vehicle. They are a perfect fit for both the original turn signals and the Nakatanenga LED mudguard turn signals. The lamp guards are manufactured locally from stainless steel and can be given a high-strength black powder coating on request. This can be painted over (e.g. in car colour). Scope of delivery: Two indicator protection grilles, foam rubber base, anti-theft mounting material. Only available in stainless steel, black powder-coated!
Prices incl. VAT;
Spacers for stabilizer bar front axle, for Defender 90/110/130 from TDI upwards
Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair
Prices incl. VAT;
Underride protection, 3-piece, steel 4mm, with welded-in 4mm reinforcement, Land Rover Defender
Underride protection for Land Rover Defender Underride protection with two heavy duty recovery eyes for all Land Rover Defender, robust three-part construction, steel 4mm, with welded-in 4mm reinforcement in the impact area, optionally hot-dip galvanised or hot-dip galvanised and black powder-coated Underride protection suitable for all Land Rover Defender from 1983 to today skid plate made of 4 mm thick steel, with welded-in 4 mm reinforcement in the impact area galvanised or galvanised and black powder-coated as desired Side parts made of 8 mm thick steel, galvanised (black) with two robust heavy duty recovery eyes The underride guard is attached to the original mounting points using the original vehicle bolts. The complete other installation material is included.Material info:Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or very much slows down the corrosion of the base material.Attention: The shackles shown are not included in the delivery.Please select the desired surface.
Prices incl. VAT;
Recovery Shackle for Land Rover Defender, front Bumper
These recovery shackles (2-piece) fit the front bumper of every Land Rover Defender 90/110/130, with and without A/C. They are available in a red powder coat, black galvanized or passivated. Assembly Information: For vehicles with A/C it is important to disassemble the grill, then mount the shackles and then reassemble. All the necessary hardware is enclosed in the package. Material Information: Passivating is the process of making metal, or another substance, unreactive by altering the surface layer or coating the surface with a thin inert layer. Max Load: 15 t Dimesions: Length: 100 mmWidth: 80 mmHight: 48 mmHole diameter: 22 mm Please chose the desired surface.
Prices incl. VAT;
Cabin Light for Landrover Defender
More Light, Better Visibility: The Interior Light for Your Land Rover Defender! Sound familiar? You're out and about with your Landy, it's getting dusky or it's already pitch black, and you're looking for something inside. The original interior lighting in your Defender is often more of a glimmer than a real light that provides orientation. That ends now! With our high-quality interior light, you finally bring the brightness into your Defender that you deserve. Whether you want to read maps in the dark, sort your gear, or simply create a pleasant atmosphere – this light makes the difference. Why You Should Opt for This Interior Light: Significantly Improved Light Output: Experience a noticeably brighter interior compared to the often undersized standard lighting. Optimal Illumination: Ensures better light distribution, so even dark corners of your Defender are better lit. Easy Orientation: Find tools, equipment, or that life-saving chocolate bar faster and without a long search. Pleasant Ambiance: Creates a functional and simultaneously pleasant lighting situation in your iconic vehicle. Robust Construction: Made for demanding use in the Defender – it withstands the vibrations and conditions your Landy masters. Perfect Fit: Designed to integrate well into your Defender's interior and to be easily exchanged for the original part. (Note: Please check specific model compatibility and installation instructions if applicable.) Put an End to Dim Lighting! This interior light is a small upgrade with a big impact. It not only increases the practical utility of your Defender in everyday life and on adventures but also provides an extra plus in comfort. Equip your loyal companion now with lighting that does justice to its character. No more fumbling in the dark – treat yourself to clear visibility inside your Land Rover Defender! Interior light for all Land Rover Defender 90/110/130 models, replacement for the original part between the sun visors, also suitable as lighting for the second row of seats in conjunction with the roof console. This is a high-quality genuine Land Rover OEM part, not an inferior reproduction. You can find a suitable replacement festoon bulb HERE in the shop. Do you have questions about compatibility or installation? We at Nakatanenga are, as always, here to help and advise you!
Prices incl. VAT;
Steering damper for LAND ROVER Defender 90+ 110+ 130 by TREKFINDER Made by BILSTEIN B6
Steering damper for LAND ROVER Defender 90+ 110+ 130 from TREKFINDER Made by BILSTEIN B6 Steering damper for Land Rover Defender all models from TREKFINDER Made by BILSTEIN - to optimise the Land Rover Defender, the well-known shock absorber brand BILSTEIN and STOCK & STEIN have joined forces to offer the best possible solution for suspension optimisation in the area of steering behaviour. The result is a steering damper specifically for Defender that is unique in terms of functionality and performance.1 piece
Prices incl. VAT;
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today. Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request. Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated Integrated recovery eyes (22.5 mm diameter) The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.
Prices incl. VAT;
Air scoop for Land Rover Defender
Air scoop, for Land Rover Defender 90/110/130 right or left side, for adhesive, rivet or screw mounting. Material: steel, black
Prices incl. VAT;
Hub cap with Land Rover logo, suitable for Boost rim
Great look with Land Rover logo - hub caps for Boost rims Add the finishing touch to your Land Rover wheels with these high-quality centre caps featuring the iconic Land Rover logo. Designed to fit original Boost alloy wheels and other compatible Land Rover rims, they snap securely into place and enhance the clean, factory-fresh look of your vehicle. Available Colours: Graphite Grey Silver Stone Grey Perfect for replacing lost or worn caps – or for upgrading your wheels with a subtle touch of originality.
Prices incl. VAT;
Vacuum unit (for turbocharger) TD5
Effective help with power loss: vacuum can as a spare part If you’re experiencing performance problems with the turbo, the problem can be as simple as a faulty, leaky or seized actuator. The actuator is pneumatically regulated, purely mechanical and is designed to open the wastegate in the turbo charger. At high load, a good part of the hot exhaust gases are thus diverted directly into the exhaust system without propelling the turbo beyond its own safety limits and the critical boost pressure for the engine. Generally speaking, if your turbo stops working correctly, Land Rover will only supply the entire turbo assembly. But if the fault lies only with the actuator, you can order the module as a separate replacement part from us. In many cases, that can solve your problem without having to resort to buying a complete turbo assembly. Installing the new actuator in the Td5’s turbo is fairly easy. Simply screw it onto the bracket and attach both the actuator arm to the wastegate mechanism and the pressure hose to the actuator. Assuming your adjustment screw on the old actuator was in the correct position, simply set the new actuator’s arm to the same length to achieve the correct settings.
Prices incl. VAT;
Track rod guard Land Rover Defender, 4mm Steel Galvanized
Hot-dip galvanised track rod guard - for Land Rover Defender Track rod guard for Land Rover Defender 90/110/130, 4 mm zink-dipped steel, all model years. The track rod guard / skid plate protects the tie rod which is vulnerable in serious off-road driving, thus maintining steering ablility and avoiding expensive repairs and breakdowns Can not be fitted together with our heavy-duty tie rod set TRHDDESET!
Prices incl. VAT;
Differential Guard (front axle) for Land Rover Defender 90/110/130
Essential differential guard for the rear axle of any Land Rover Defender 90/110/130 Not many parts on a 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.
Prices incl. VAT;
LED Indicator front / rear for Land Rover Defender until MY2016, smoke grey
LED signal light Land Rover Defender up to MY2016: Indicator rear/front, smoke grey This high-quality LED indicator is suitable for the Land Rover Defender and is available as a front and rear indicator. It has an E-mark, a diameter of 73 mm and impresses with its unique smoky grey colour. Suitable for Land Rover Defender up to MY2016 For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
High-strength turbo charger to manifold sealing gasket for Defender Td4 / Tdci / Puma
High-strength turbo charger to manifold sealing gasket for Land Rover Defender Td4 / Tdci / Puma - special alloy.
Prices incl. VAT;
Clutch master cylinder Land Rover Defender Td5 and Td4
Clutch master cylinder Land Rover Defender Td5 and Td4 Clutch master cylinder Land Rover Defender Td5 and Td4 from year of manufacture 1998
Prices incl. VAT;
Land Rover Defender Zubehör, Discovery und Range Rover Classic Zubehör
Der Defender hat eine Seele, sagen viele. Vielleicht stimmt das, denn manchmal hat man wirklich diesen Eindruck. Er bringt einen überall hin, auch dorthin, wo andere längst aufgeben. Dafür braucht er Zuwendung, Werkzeug und Geduld. Er ruckelt, macht Geräusche und nimmt es mit Perfektion nicht so genau. Aber wer ihn kennt, weiß: genau das ist sein Charme. Es gibt kaum etwas Schöneres, als an diesem Stück britischer Ingenieurskunst selbst zu schrauben oder, wenn's mit dem Schrauben hapert, wenigstens mit Fachwissen zu glänzen.
Für alle, die lieber selber schrauben oder montieren lassen, bietet der Nakatanenga-Shop eine Schatzkiste voller Defender-Zubehör und Defender-Ersatzteile. Hier findet sich alles, was den alten Briten wieder auf Vordermann bringt oder ihn zum echten Reisefahrzeug macht.
Von Stoßstange bis Schnorchel - das richtige Defender Zubehör für unterwegs
Wer einen Defender in ein Reisefahrzeug umbauen möchte, der braucht mehr als gute Laune und einen vollen Tank. Eine Seilwindenstoßstange, nicht, weil man sich selbst festgefahren hätte, nein, natürlich nur, um die anderen rauszuziehen. Wir empfehlen unsere Nakatanenga Seilwinden-Stoßstange für den Defender wahlweise im Bundle mit Seilwinden von Horntools oder Superwinch, optional mit oder ohne Fernscheinwerfer.
Aber es gibt auch Momente, da hilft kein Gebet, nur eine gute Bergung. Mit Bergeösen, Hecktraversen-Verstärkungen und Bergeboards bleibt man auch dann souverän, wenn der Boden meint, ein Abenteuer draus machen zu müssen. Alles robust, erprobt und bereit für den Ernstfall.
Wer längere Strecken abseits der Zivilisation plant, rüstet am besten gleich mit einem Zusatztank in 56 Liter oder 66 Liter auf, während der Defender-Unterfahrschutz dafür sorgt, dass spitze Steine, Wurzeln oder neugierige Felsen keine bleibenden Erinnerungen hinterlassen. Rockslider schützen die Flanken. Findet ihr alles bei uns in der Unterkategorie Schutz.
Der Schnorchel für den Defender bzw. die erhöhte Luftansaugung ist natürlich Pflicht für alle, die in die Wüste wollen oder durchs Wasser müssen, wobei auch Hamburger Pfützen manchmal verdächtig tief aussehen können. Gibt es für Td4, Td5 und Tdi in verschiedenen Ausführungen für Defender mit oder ohne Überrollkäfig.
Defender-Fahrwerk, Felgen und Reifen
Kein Abenteuer ohne ordentliches Fahrwerk. Ein Defender-Fahrwerk ist keine reine Geschmacksfrage, sondern hängt davon ab, wofür der Wagen eingesetzt wird. Egal ob 90er, 110er oder 130er: Es gibt Fahrwerke für jeden Zweck, vom Familien-Daily-Driver bis zum voll beladenen Fernreisemobil. Für den richtigen Offroad-Look gesellen sich dazu beispielsweise Stahlfelgen wie unsere klassische ANR-Felge, die Wolf-Felge oder ebenso robuste Dotz Dakar.
Und wer keine Lust auf die Suche nach einer Werkstatt hat, die Defender-Reifen vernünftig wuchten kann, nimmt gleich komplett montierte Reifen. Alles zum Thema Reifen und Felgen findet ihr hier.
Innenleben mit Charakter - Sportsitze für den Defender
Wer Kilometer frisst, sollte bequem sitzen. Mit neuen Sitz-Polsterungen lässt sich der alte Charme der Defender-Sitze bewahren, Sportsitze für den Defender bringen modernen Halt ins Abenteuer, und passende Sitzbezüge schonen das Material oder verstecken die Spuren vergangener Expeditionen. Richtig klassisch wird es dann mit den passenden Lenkrädern für den Defender.
Und dann gibt's da noch das Defender-Zubehör, von dem man sich fragt, warum Land Rover das nicht einfach schon von Werk aus eingebaut hat. Türgriffe aus Leder, ein Handschuhfach, ein Haltegriff an der A-Säule, damit der Einstieg selbst nicht jedes Mal wie eine kleine Expedition wirkt.
Sitzschienenverlängerungen, weil britische Ingenieure offenbar keine langen Beine kannten. Eine zweifarbige Innenraumleuchte, ein Ablagefach hinter der Cubbybox und natürlich der Hecktürdämpfer, der verhindert, dass einem die Tür ins Kreuz fällt, wenn der Wagen schräg steht.
Doppelbatterie-System, Elektrik und Licht - Strom, wo er gebraucht wird
Egal, ob Standheizung, Laptop, Kühlbox oder Handy: Auf Reisen braucht man Strom. Deshalb ist eine der ersten Umbauten, die ein Defender bekommt, oft ein Doppelbatterie-System. Unser Doppelbatterie-System für den Defender mit Edelstahlhalterung bietet Platz für zwei Banner 80Ah-Batterien, beinhaltet den Kabelsatz und ein Trennrelais auf Wunsch gibt es einen Batterie-Monitor dazu. Perfekt dazu passt das Solarpanel auf der Motorhaube passend für Td5 und Td4.
Im Bereich Beleuchtung reicht das Spektrum 7-Zoll-Scheinwerfern, LED-Signalleuchten bis zu Lightbars von Osram und Vision-X, dazu gibt es sogar noch einen passenden Lampenbügel. Rückfahrscheinwerfer, Innenraumleuchten und passende oder eine Kennzeichenbeleuchtung mit Kamera sind ebenfalls Teil des Sortiments.
Dachträger für den Defender, Boxen und Ordnung im Chaos
Der CargoBear-Dachträger für den Defender ist fast zu schön, um ihn nur mit Ausrüstung zu beladen. Flach, begehbar, mit Durchzügen und wie gemacht für unsere Roof-Lodge-Dachzelte, befestigt über ein Schnellmontagesystem, das auch für verschiedene andere Dachzelte passt. Perfektes Zubehör für den Defender-Dachträger sind unsere Outdoor-Dusche, die Nakatanenga Shower Tube, und die Roof Lodge Evolution 2 Markisen. Oben auf den Dachträger passen die Nakatanenga Transportboxen und die große Alubox mit 198 Litern Volumen, genügend Platz für Tisch, Stühle und noch das eine oder andere „das-könnte-man-brauchen"-Teil.
Für alle, die noch mehr Stauraum brauchen, gibt's die unauffällige Kotflügelbox, Seitenstauboxen, das Wertsachenfach als Cubbybox-Erhöhung oder das Staufach im Fußraum. Der Tailgate Organizer mit MOLLE-Taschen schafft Ordnung am Heck, das Cargonetz unter dem Dachhimmel nutzt jeden Zentimeter, und die Fenstergitter mit MOLLE-System erweitern den Stauraum an den Seiten- und Heckfenstern.
Standheizung für den Defender
Eine Standheizung macht den Defender zum Winterreise-Fahrzeug, besonders elegant integriert mit der Cubbybox-Erhöhung. Wer noch warm duschen will, ergänzt das Ganze um ein Warmduscher-Kit. Alternativ wärmt die mobile Standheizung in der Alukiste auch das Dachzelt oder im Zweifel den Gartenpavillon.
Pflege, Wartung und Defender-Ersatzteile
Nach der Reise ist vor der Reise. Bremsen, Auspuff, Kardanwellen, wer weiß, wo der Dreck sitzt, weiß auch, wo geschmiert werden muss. In unserem Sortiment haben wir alle wichtigen Defender-Ersatzteile, von Radlagern, Luftfiltern über Auspuff, Getriebe bis hin zu ganzen Karosserieteilen wie komplett verzinkte Rahmen für Defender und Discovery. Ob kleiner Service oder große Restaurierung, alles, was der Land Rover Defender an Zubehör braucht, gibt's hier. Übrigens passen viele der Defender-Ersatzteile auch auf den Discovery I und II und auf den Range Rover Classic. Im Zweifel einfach bei unserer Service-Hotline nachfragen.
Und wer lieber Profis ranlässt, kann sich auf die hauseigene Werkstatt verlassen: spezialisiert auf Defender, mit Einbauten von Zusatztank oder Standheizung über Doppelbatterie-System bis zur Differenzialsperre. Wir übernehmen aber auch komplette Restaurationsprojekte und die Überholung von Defender-Getriebe oder Motor.
Nakatanenga - der Online-Shop für Defender-Zubehör und Defender-Ersatzteile
Der Defender ist kein Auto für Perfektionisten. Er ist ein rollendes Abenteuer, ein fahrbares Bastelprojekt und ein bisschen Wahnsinn auf Rädern, das richtige Defender-Zubehör und die passenden Defender-Ersatzteilen vorausgesetzt. Aber dafür bekommt man etwas, das kein modernes SUV bieten kann: ehrliche Mechanik, echte Geschichten und das gute Gefühl, dass man notfalls selbst alles wieder zum Laufen bringen kann.
- Alles für den Umbau, die Reparatur oder die Restauration des Defenders: Bei Nakatanenga gibt's Defender-Ersatzteile, Karosserieteile und Zubehör, das passt: von praktisch bis außergewöhnlich.
- Keine Lust selber am Defender zu schrauben? Einfach anrufen und Werkstatt-Termin vereinbaren. Wir haben uns auf das britische Kultfahrzeug spezialisiert. Vom einfachen Reifenwechsel bis hin zur kompletten Defender-Restauration ist alles möglich.
- Dachträger für den Defender gesucht? Einer, der nur wenig aufbaut und dabei richtig gut aussieht? Wir sagen: Unser CargoBear kann's.