Das könnte Sie auch interessieren
Stainless steel lock for Nakatanenga side storage boxes Our first generation lockable storage boxes for the sides of classic Defenders were secured by round plastic locks. We now offer these security locks in a rustproof and durable stainless steel version, suitable both for replacement and upgrade. By the way, swapping the locks poses no problem whatsoever, as the new stainless steel versions have the same fit as the older Southco versions. New fastening material is also included. The lock comes with 2 keys. PLEASE NOTE: The lock only fits the older version of the storage box with a round lock.
Prices incl. VAT;
Serie I & II ROADspec 9″ Clutch Kit LOF clutches have developed their own clutch kit for Series I & II. This Clutch kit with its organic friction material is far stronger than the original and suits 1.6, 2.0 & 2.25l petrol and Diesel, 6-cylinder petrol engines and also V8 conversions. Included in this kit: LOF 9″ clutch plate with organic material LOF Serie I & II 9″ clutch cover Spigot bush Syringe with grease LR part numbers: cover 591705, 9" plate 591704
Prices incl. VAT;
Ähnliche Artikel
Defender 110 side storage box When you go on big adventures, every bit of storage space is useful, which means that not a single centimeter should be wasted.Our storage box makes ideal use of dead space. Made entirely of stainless steel and powder-coated in black, the storage box is waterproof, lockable and the ideal container for salvage materials, rubber boots or tools. The box fits perfectly for the sides of the Land Rover Defender 110 (2-door), but also for e.g. a motorhome, long-distance vehicle or other expedition vehicles.The open flap is held at a 90-degree angle by two thin steel cables and thus serves as a storage surface for water canisters, for example, or even as a small breakfast table. Supplied complete with 2 keys and all fixing materials.Internal dimensions of the side storage box: 465 mm x 285 mm x 335 mmPlease note:This side storage box can only be installed in front of the rear wheel arch in hardtop versions. Merkblatt Edelstahl und Rost
Prices incl. VAT;
Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!
Prices incl. VAT;
Stainless steel screw sets for Land Rover Defender NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover shape.The screws have the identical heads as the original screws on the Defender!!!set comprises a total of over 440 parts. With this set, all externally visible screws on the vehicle can be replaced with high-quality, rust-free V2A stainless steel screws.Suitable for all model years - TDi, TD5, TD4 2.4, TD4 2.2The side door and rear door hinge screws, as well as the screws for the body mounting at the rear, are specially manufactured for us and correspond in shape to the original screws (Torx tool holder).The pack also contains hood bumper screws specially manufactured for us.The screw sets are clearly arranged in 10 bags for each part of the vehicle: Rear door hinges Rear body mounting Radiator grille Cargo bed strip + reflectors Hood hinges Rear cross member Spare wheel holder Headlight covers + mudguard covers Side door hinges Inner door sill + A-pillar + 2 bumper screws + anti-seize paste Simple installation is possible even for car amateurs.We also supply an anti-seize paste for the screws.Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB) Note: The screws for the door hinges may have to be shortened. The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Side locker for Land Rover Defender, stainless steel, black powder-coated on the back left
€569.00
Prices incl. VAT; / Parcel shipping
Side Lockers
Externally accessible storage space is standard in Land Rover emergency or service vehicles. And for good reasons. Firstly, unused hollow spaces within the body offer additional stowage and secondly, items that shouldn’t be stored inside the car due to access, hygiene or health reasons can be kept separately.
Especially when the vehicle has been modified into a camper van or the load space has to be kept clean for humans and animals, it is a good idea to keep certain items in exterior storage. This includes oily tools, wet and dirty clothes or smelly and chemically hazardous items like jerry can spout, funnels or fuel-soaked rags. Camping fans particularly like to store gas cookers, cartridges and cooking accessories in the side locker. Using the lid as a table, your morning coffee tastes best besides your vehicle.
We have completely overhauled the side locker and managed to improve some of the key features significantly. So, if you haven’t cut a hole in the rear left of your Defender yet (or had it done for you*), it’s now time to do so. And if you already have our old side locker installed, you can easily upgrade to the new version. Dimensions and mounting holes are fully compatible so that the upgrade can be installed in no time.
What’s new? The box is now welded all around and the construction has been designed to meet the requirements of IP67. This has greatly improved the stainless steel locker’s robustness and waterproofing. We also added a new compression key lock with IP66 certification. The lock’s clamp can be adjusted so that the lid will stay permanently tight and rattle-free. The lid’s hinges are mounted at the bottom and it is held at a 90° angle by small chains on either side, forming a small tray or table.
The side locker is custom-made for Defender 110s. The five door station wagon will take the storage box behind the rear left wheel arch, the three door hard top alternatively offers installation in front of the wheel arch. Alternatively, this middle position in the hard top Landy can also take our bigger locker with even more stowage space.
The new side storage locker can also be installed in all other camper vans and expedition vehicles which offer suitable space in the body. As always, we are happy to assist with any questions you have.
Water and dust proof!
Suitable for all Land Rover Defenders 110 from 1992 (Tdi, Td5, Td4) Station Wagon and Hard Top
Delivery includes 2 keys and all required fixings.
Dimensions: 355 x 270 x 340 mm
Material: stainless steel, the lid is powder coated in black RAL9005 matte
https://www.nakatanenga.de/media/pdf/74/df/0c/Merkblatt-Edelstahl-und-Rost.pdf
Installation advice:
- Defender 110 station wagon: behind rear left wheel arch
- 110 hard top version: also in front of the rear left wheel arch
- * Cutting into your vehicle’s body takes some experience and the tasks can vary immensely which each vehicle, especially if you have to remove struts, panels or checker plate. If you’re uncertain or don’t have the right tools, we highly recommend leaving the cutting of the opening to the professionals. Installing the box itself is DIY level though.