Installation accessories for parking heater boilers We recommend the following accessories for connecting the boiler and the heater: Pressure reducer adjustable 1-5.5 bar with pressure gauge and 2x hose nozzle 10mm Protect the sensitive components (boiler, drinking water filter, but also e.g. simple plastic pipe connections) of your pressurized water system. With a maximum inlet pressure of 16 bar, this pressure regulator with pressure gauge can also cope with the most powerful pressurized water pumps in touring vehicles and boats. Its outlet pressure is infinitely adjustable between 1 and 5.5 bar.Specifications: Max. Operating pressure, inlet side: 16 bar Pressure setting range, outlet side: 1 - 5.5 bar Factory setting: 3 bar Max. Max. operating temperature: 80 °C Pressure gauge scale: 0 - 10 bar Operating medium: Water Connections 1/2" and 1" female thread (ISO 228-1) Length incl. hose nozzles: 139 mm Scope of delivery: Adjustable pressure reducer 2 x hose nozzle 10 mm Pressure gauge   Water pressure system - pressurized water pump & pressurized storage tank 12V in a set The heavy duty water pressure pump with bypass system, 4 bar pressure and 18 liters flow rate per minute and the 1 liter accumulator tank are the ideal combination for your pressurized water system.Together they enable smooth operation with sufficient water pressure - even when filtering.Reduced pump cycles also lead to a long service life. Its ease of repair also makes the pump a sustainable choice.Scope of delivery: Accumulator tank Pressurized water pump Pre-filter 4x 10 mm 1/2" NPT connection nozzles   Adapter Webasto hot air duct 60mm to 90mm Attention: 90mm inner diameter. A 90mm warm air pipe will not fit. In this case, a 90mm pipe connector (ArtNo. 18067) must be used. This adapter suitable for rather rare applications such as adapting 60mm hot air pipe to e.g. boilers with 90mm connection. Please note that you should never reduce the throughput of the hot air pipework of an air heater (i.e. do not reduce from 90mm to 60mm). Note: further installation accessories for parking heater boilers can be found HERE in the store.

Warm shower upgrade kit 2.0 - combiBOIL with Comfort Boiler Control control panel This upgrade kit turns your existing / installed air heater into an integrated complete system for heating and hot water. It contains all the necessary connecting parts between the heater and boiler and all the components you will need to install the system. Since its development by us in 2017, the Warmduscher kit has been the simplest and most popular way of equipping touring vehicles or boats & yachts with hot air heating and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. Warm shower kit 2.0 - UPGRADE 2023The original Warm Shower Kit is now equipped with the combiBOIL hot water boiler. This upgrade makes hot water production even more versatile, convenient and safe. Choose the right one for your projectThe Warmduscher upgrade kit 2.0 is available with the combiBoil hot water boiler in various versions and three sizes. Please note:Especially if your heater is already installed, when selecting the volume, pay attention not only to how much water you want to heat, but also to how much space you really have left in the camper to install the boiler sensibly (it should be installed as straight as possible and not far away from the heater).Your currently selected configuration is displayed in the product title and in the drop-down menu. Scope of delivery: 1x combiBOIL hot water boiler with 7, 9 or 12 l capacity, with stainless steel boiler and heat exchanger, in the variant selected above Comfort Boiler Control control panel 2 x adapters for the hot air connections of the boiler 1x adjustable thermostatic mixing valve / scalding protection 2 x brass hose nozzles 1 x screw-on hose nozzle 2 x T-piece for water pipe 1 x G1/2" steel flex hose for the heat-resistant connection between the boiler and mixer Water hosesIf the water is to be used for drinking or cooking, we strongly recommend that the hoses are certified accordingly. This ensures that no harmful substances are transferred to the drinking water and that the taste and composition are not altered by the material.Drinking water-certified hose lines for hot and cold water are available here. Pressure reducer:The boiler is made of high-quality stainless steel and is precisely manufactured. Nevertheless, the inlet pressure should be limited to 1.5 bar.In all pressurized water systems and systems with submersible pumps with a built-in or separate non-return valve, a pressure reducer should always be used upstream of the boiler and set to 1 to 1.5 bar.You can find pressure reducers with pressure gauges under the following links.A safety valve for releasing excessive pressure no longer needs to be purchased separately with the Warm Shower Kit 2.0. combiBOIL has installed this ex works. Water pump:A decent pump brings the system up to the required pressure and circulates it. It must be powerful enough to ensure a good and even flow even with water filtration and allow the water system to run smoothly. Provided it is durable and repairable. You can get this pump here.

Warm shower kit 2.0 - Autoterm parking heater + combiBOIL with Comfort Boiler Control The original from tigerexped - but now even better! The Warm Shower Kit is the simple way to equip touring vehicles or boats & yachts with a hot air heater and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. How does the Warm Shower Kit 2.0 work:The Warm Shower Kit 2.0 can generate hot water in three different ways: Via an electric heating element, which means via electricity if you have just enough reserves, or are connected to shore power.Simply on the side when the heating is running - without consuming any additional energy. Hot water is the "waste product", so to speak.NEW: The boiler can be integrated into the engine's cooling water circuit to heat either the service water itself or a second water loop. Conversely, the engine can also be preheated to make starting more gentle (not suitable for use in arctic temperature ranges).Each of these three options has its advantages and can be used when it suits best. After a few days of self-sufficient camping in hot weather, for example, you don't want to leave the heating on, nor do you want to heat up the water from driving. However, if it is too warm for the heating, there is probably enough solar power in the batteries to generate hot water via the electric heating element. With the combination of three options, this kit always offers the one that fits perfectly in every situation. The options for integration into the cooling water circuit are as follows: Cooling water circuit heats the service water, i.e. the cooling water circuit is connected to the boiler and heats service water for showers etc. while driving. (Caution: As the temperature of the cooling water can rise above 100°C (due to pressure), the boiler must be prevented from overheating by means of a valve or by switching off the circulation pump).The boiler preheats the cooling water circuit (engine), which means that the above function is reversed. The engine cooling circuit can be preheated by connecting the boiler to a 230V/110V power source or by using hot air from the parking heater.Heating a second water loop, whereby the energy that is fed into the boiler via the electric heating element or hot air is fed into a second water circuit via a circulation pump. It is also possible to combine the two water circuits (so that the cooling water circuit heats the second water loop), although precautions must be taken with regard to the flow temperature from the motor. NEW: Integration of a second water loopWith combiBOIL it is possible to operate a second water loop with hot water. For example, underfloor heating or towel radiators can be implemented to make it easier to dry wet clothes and towels in the vehicle. Please note that an expansion tank must be integrated into the water loop and, depending on the application, the water may need to be circulated by a circulation pump. Scope of delivery:The heaterThe diesel parking heaters from Autoterm - shown here in the Air 2D and Air 4D models - have become an integral part of modern motorhomes, boats and yachts. The robust heaters from the Latvian manufacturer have been impressing with their reliability and quality for many years and enjoy an excellent reputation in the industry.Important for self-installers: You can install the heater yourself - without losing the manufacturer's warranty, of course, as long as you follow the enclosed installation instructions from Autoterm. In the event of damage, the inspection is carried out by the seller and the complaint is made directly to Autoterm.The heaters carry an e-mark, which means that the installation does not have to be registered by the TÜV.Please refer to the respective product description of the Autoterm Air 2D and Air 4D models to find out about functions and features such as heating modes, height kit and more. The heaters used in our hot shower kits are identical to those sold separately.The boiler - tigerexped & Autoterm combiBOILThe new combiBOIL hot water boiler is a high-quality product made in Western Europe - and the only boiler for use with an air heater that has an integrated thermostat in the versions with 230 / 110 V heating rods.In the versions for 12 V or 24 V, an external thermostat module is included for space reasons.Fully integrated systemThe combiBOIL can be monitored and controlled directly via the control panel of your Autoterm heater. The heater can thus automatically regulate the temperature of the boiler - a manually operated control flap to divert the hot air is therefore unnecessary in most cases. Dangerous overheating with vapour formation in the boiler is reliably prevented.Only in extreme conditions - such as arctic temperatures in poorly insulated vehicles - can a control flap still be useful.Automatic frost protection can also be set: If the water temperature drops to 2 °C, the heater automatically warms the water to 15 °C and the ambient air to 7 °C.For winter storage, the water should be drained as usual; the boiler has its own drain valve for this purpose. However, if you only leave your vehicle unattended for a short time, this function reliably protects the system from frost damage - ideal in combination with the Warm Shower Kit 2.0.Which size for how many peopleThe combiBOIL hot water boiler is available in 7 litre, 9 litre and 12 litre sizes.Our recommendation: 7 litres is completely sufficient for two people We recommend 9 litres for three or more people 12 litres for four or more people Depending on the heating method, the heated water can reach temperatures of up to 80 °C. By adding cold water, significantly more hot shower water is available than the pure volume of the boiler would suggest.Please note: A larger volume also has disadvantages - longer heating time, higher energy consumption (especially with electric operation), greater space requirements and a larger amount of fresh and waste water that has to be transported. In many cases, "more" is not always "better".Heater scope of delivery - complete with installation kit and control panelHeater(s) of your choice (2 kW, 4 kW or 2 × 2 kW heating power, 12 V or 24 V on-board power supply)Ready-to-plug-in wiring harness with AMP SuperSeal plugsStainless steel exhaust silencer (17 × 9 × 5 cm)Fuel pumpIntake silencer (for the burner, not the hot air) Fuel line Extensive range of small parts for installation Autoterm Comfort Boiler Control control panel - for controlling the heating and boiler (see Autoterm Comfort Control Standard for details of the heating modes) Hot air duct 2 × rotating hot air outlet nozzles 3 m hot air pipe 2 × adapters for the hot air connections of the boiler 1 × Y-piece (asymmetrical) Water connectionHot water connection kit (TEX1778) - for simple, safe and error-free integration of the boiler, even by non-professionals. This kit minimises installation errors and makes the most demanding part of the water installation particularly straightforward.Included are: 0.5 m special blue silicone drinking water hose 1.0 m red special silicone drinking water hose 1 × adjustable thermostatic mixing valve / scalding protection 3 brass spouts with external thread 2 brass spouts with internal thread (1 only included in the hot shower kit) PTFE thread sealing tape 1 × straight hose connector 1 × T-piece for connection to the cold water pipe 6 × stainless steel hose clamps with tightening jaws 2 × smaller stainless steel clamps

combiBOIL hot water boiler for campers - More heating options & functions thanks to full Autoterm integration combiBOIL - One boiler, all optionscombiBOIL is unique in its market segment in terms of quality and range of functions.It offers three different options for water heating: With an electric heating cartridge. Using hot air from a parking heater. Via integration into the engine cooling circuit / with a water heater The combination of these options offers maximum flexibility and efficiency in various areas of application. Monitored and controlled by Autoterm Comfort Boiler Control: The Autoterm Comfort Boiler Control control panel (a further development of the Comfort Control) is specially designed for Autoterm heaters and combiBOIL hot water boilers to work together.The integrated thermostat function in the versions with 12V /230V heating elements enables extremely convenient and safe operation of the hot water system. All heating control options are retained. Your advantages: Display of the water temperature in real time, even on the SleepScreen Water temperature can be preset from 50 - 80 °C Adjustable hysteresis to 5 - 25 °C from the target temperature Overheating protection (configurable): Heating switches off automatically before the water temperature reaches a critical point. Normally, a control flap is no longer required to regulate the boiler. Frost protection: If the water temperature drops to 2 °C, the heating system automatically heats the water to +15 °C and the ambient air to +7 °C. The boiler and water pipes are reliably protected against frost damage. The Autoterm Comfort Boiler Control is only available as an option in combination with the combiBOIL hot water boiler - please select accordingly when ordering. Note:Autoterm Comfort Control and Autoterm Comfort Boiler Control differ in terms of hardware and software. The standard Comfort Control cannot be updated to the boiler monitoring functions.Goodbye control flapThanks to the possibility of controlling and monitoring the boiler temperature, regulation via a Y-piece / control flap is finally superfluous. Before a critical temperature is reached, the heating can be automatically switched from the current heating mode to ventilation in order to lower the boiler temperature. The rapid cooling achieved in this way enables the heating mode to be restarted before a clearly noticeable reduction in the room temperature occurs.A control damper may still be useful only in the case of extreme temperature requirements (e.g. sub-zero temperatures in the double-digit range with sub-optimal thermal insulation). Couple or large family - as much hot water as you needThe combiBOIL is available in three sizes. With volumes of 7, 9 or 12 liters, it always heats enough hot water, but not unnecessarily much. At a temperature of just under 60 °C in the boiler, 7 liters of water provide enough pleasantly tempered shower water for two people. Use with other heatersIt is not absolutely necessary to use an Autoterm heater to operate the combiBOIL hot water boiler. The hot air flow for hot water production can also be generated by other heaters.In this case, however, the integration of temperature measurement and the corresponding safety functions must be dispensed with, as the use of the Autoterm control panel requires connection to a corresponding heater. A control flap and its manual operation are then a prerequisite for safe operation.

Installation accessories PUNDMANN THERMAIR 6 and 9 for connecting the boiler and the heater we recommend the following accessories: Radio remote control: range approx. 100 metres, suitable for all AUTOTERM Air heaters. Y-piece: 60x60x60 adjustable Bowden cable: for adjustable Y-piece Thermo mixing valve External temperature sensor: for measuring the temperature at a specific location - length 5metres Pressure reducer: adjustable with manometer, pressure indicator Brass hose connector: ø 10mm, external thread 1/2 'inch Brass T-piece hose connector: ø 10mm Drinking water hose BLUE: ø 10mm, sold per metre Drinking water hose RED: ø 10mm, sold per metre Water pump: 12V Check valve Please order the accessories that suit you separately!