combiBOIL hot water boiler for campers

combiBOIL hot water boiler for campers - More heating options & functions thanks to full Autoterm integration

combiBOIL - One boiler, all options
combiBOIL is unique in its market segment in terms of quality and range of functions.
It offers three different options for water heating:

• With an electric heating cartridge.
• Using hot air from a parking heater.
• Via integration into the engine cooling circuit / with a water heater
• The combination of these options offers maximum flexibility and efficiency in various areas of application.

Monitored and controlled by Autoterm Comfort Boiler Control:

The Autoterm Comfort Boiler Control control panel (a further development of the Comfort Control) is specially designed for Autoterm heaters and combiBOIL hot water boilers to work together.
The integrated thermostat function in the versions with 12V /230V heating elements enables extremely convenient and safe operation of the hot water system. All heating control options are retained.

Your advantages:

• Display of the water temperature in real time, even on the SleepScreen
• Water temperature can be preset from 50 - 80 °C
• Adjustable hysteresis to 5 - 25 °C from the target temperature
• Overheating protection (configurable): Heating switches off automatically before the water temperature reaches a critical point.
• Normally, a control flap is no longer required to regulate the boiler.
• Frost protection: If the water temperature drops to 2 °C, the heating system automatically heats the water to +15 °C and the ambient air to +7 °C. The boiler and water pipes are reliably protected against frost damage.
• The Autoterm Comfort Boiler Control is only available as an option in combination with the combiBOIL hot water boiler - please select accordingly when ordering.

Note:
Autoterm Comfort Control and Autoterm Comfort Boiler Control differ in terms of hardware and software. The standard Comfort Control cannot be updated to the boiler monitoring functions.
Goodbye control flap
Thanks to the possibility of controlling and monitoring the boiler temperature, regulation via a Y-piece / control flap is finally superfluous. Before a critical temperature is reached, the heating can be automatically switched from the current heating mode to ventilation in order to lower the boiler temperature. The rapid cooling achieved in this way enables the heating mode to be restarted before a clearly noticeable reduction in the room temperature occurs.
A control damper may still be useful only in the case of extreme temperature requirements (e.g. sub-zero temperatures in the double-digit range with sub-optimal thermal insulation).

Couple or large family - as much hot water as you need
The combiBOIL is available in three sizes. With volumes of 7, 9 or 12 liters, it always heats enough hot water, but not unnecessarily much.

At a temperature of just under 60 °C in the boiler, 7 liters of water provide enough pleasantly tempered shower water for two people.

Use with other heaters
It is not absolutely necessary to use an Autoterm heater to operate the combiBOIL hot water boiler. The hot air flow for hot water production can also be generated by other heaters.
In this case, however, the integration of temperature measurement and the corresponding safety functions must be dispensed with, as the use of the Autoterm control panel requires connection to a corresponding heater. A control flap and its manual operation are then a prerequisite for safe operation.