Ähnliche Artikel
Roof console Land Rover Defender - transverse Roof console for Land Rover Defender 90/110/130, is mounted crosswise to the direction of travel, provides a DIN slot and storage space. The Nakatanenga switch bundle with 7 on/off switches is suitable for mounting in the DIN slot.Not suitable for vehicles with sunroof.Available in grey and black.
Prices incl. VAT;
Console for headliner - for Defender 90/110/130 This roof console for the Land Rover Defender (90/110/130) brings some desperately needed storage space to the cabin of the vehicle. The console has not only a large storage compartment but also a DIN slot allowing for a radio or switches to be mounted. We recommend our own Nakatanenga switch bundle, for easy installation Remarks: Easy installation by simply following the integrated manual Comes with the necessary hardware Rear-view mirror remains at the same spot This consol is not suitable for soft-tops The Sun visors need to be shortened The original dome light can be detatched and mounted inside the console. In the rear of the console a second OEM dome light can be mounted or some more switches. By upgrading to a second doemlight now even the read seats get some light. The Rear view mirror can be mounted just where it was before. The console is available in truckcab/ singlecab for all vehicles produced from 03/2013 or all other Stationwagons and doublecabs. Please select.
Prices incl. VAT;
Das könnte Sie auch interessieren
Nakatanenga spare tire backpack If you are occasionally "out at home", be it offroading, survival adventures or expeditions, you know the feeling when dust, dirt and moisture slowly but surely penetrate into the innermost areas: into the sleeping bag, in the spare linen, in the food, in the tool. There, where you just want to have it dry and clean, because otherwise it quickly starts to gnaw on morality. The rule of thumb is therefore, no matter whether backpack, tent or 4x4: dirty things stay together, well packed and especially OUTSIDE. Our Nakatanenga spare tire backpack with about 80 l volume realizes this principle for your 4x4. Firewood, muddy slings, wet clothes or tarpaulins, garbage, game loot and much more are stored outside on the spare tire, on the tailgate or on the roll bar. This ensures that the interior of the car and the rest of the equipment are guaranteed to remain clean. If the additional storage space is no longer needed, the spare tire backpack is quickly cleaned, folded and packed away. The 80 l backpack developed according to US MIL-SPEC is attached non-slip with two straps. It is freely expandable by double-sided MOLLE, e.g. with our first aid kit. Trivia is best kept in the zip pocket on top and meshes at the bottom allow water and dirt to drain off quickly. The bag is made of sturdy polyamide 6.6 and is internally PU-coated, odorless and without plasticizer. The spare tire backpack is ideal extra storage space with a large footprint. Especially with smaller 4x4s that is very valuable. If 80 l are too much you should take a look at the medium version with 47 l. Delivery is without the illustrated accessories. Material: Polyamide 6.6 with PU coatingCapacity: about 80 litersDimensions: HxWxD ca. 66x525x210 mm
Prices incl. VAT;
TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997
Prices incl. VAT;
Shear bolt for steering column lock Note: When replacing the steering column lock, 2 of these shear bolts are required. Suitable for DEFENDER 1986 - 2007.
Prices incl. VAT;
Glove Box Conversion Kit for Defender Puma
€89.00
Prices incl. VAT; / Parcel shipping
↪️ fits Land Rover Defender 90/110/130 ✔️ model year 2007-2016 ✔️ easy fitting with vehicle toolkit possible ✔️ best quality ✔️ fast shipping
Retrofit Kit Glove Box Defender TD4
Finally a way to add the much missed glove box for model year 2007-2016 Land Rover Defenders (Puma 2.4 & 2.2). This kit creates storage room for those things you usually have to look for in the driving bay, like flashlight, lighter, mobile, charging cables, etc.
The grab handle is re-fitted after fitting the glove box. This kit is made from durable steel/alloy, powder coated in the same colour as the Defender Td4 cockpit.
Fitting can be done with vehicle tool kit. Kit is suitable for LHD and RHD vehicles.
Model year 2007-2016