Air intake cover for all Land Rover Defender models (Tdi, Td5, Td4 2.4 and 2.2), set of 3, made of 2 mm aluminium to replace the plastic covers. Powder coated, comes with stainless steel fittings. Image similar

profile for body rear or rear tub, 3-pcs Spray from wet roads, rain water, dirt, chemicals and mechanical stress all take their toll on the rear of the classic Defender (up to MY 2016) and the Land Rover Series III, especially on the trim strip under the edge of the tail gate. This aluminum profile helps to seal the door and the cargo hold, it protects the loading edge and also holds down the carpet or floor mat in the cargo area. No wonder that it frequently has to be replaced, whether it’s for visual defects or functional degradation. Our replacement profile matches the Land Rover OEM part (AQR710020) in form, function and quality, but offers a lot more value for money, as it only costs about half as much. 

Land Rover Defender Glazing Rubber - Windscreen Gasket LR056278 A replacement rubber seal for the windscreen glazing. High quality spare part - Fits models MY 1987-2016  Windscreen, green tinted and heated for Defender up to MY 2016 you will find HERE in our Shop Windscreen, green tinted for all Defender 90/110 you will find HERE in our Shop  

Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016  

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

Door Handle Exchange set Defender until MY2002 In 2002, the Defender’s doors were re-designed to accommodate the first-ever introduction of electric power windows to the line-up. In the overhaul, the door-handles were updated, too. This complete door handle repair kit makes the replacement of broken or worn-out looking door handles in pre-2002 Defenders dead easy. The kit consists of two handles, all required fastening materials and seals, as well as three lock barrels including two keys each. The handles fit front and rear doors.

Summer tyre Radar Renegade R/T+ R/T+ 285/75R16 121Q P.O.R. R/T+ 275/55R20 120Q P.O.R. R/T+ 285/55R20 117Q P.O.R. The Renegade R/T+ is the new Rugged Terrain tyre series in the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance while maintaining comfort and refinement on the road. On the road, this tyre offers drivers superior handling with a smooth and even ride, while off-road it has the necessary handling of an MT tyre. The Renegade R/T+ offers a look that is both aggressive and rugged with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. This range also features a dual sidewall design, offering riders the design choice of mud-penetrating sidewall with dagger-shaped "Side Biters" or the "Skull & Piston" look sidewall with wedge-shaped "Side Biters". These "Side Biters" provide additional traction and sidewall protection. Tyre data: Vehicle type: SUV/ Offroader Wet grip: B Noise emission: 75 dB Use: summer Off-road: yes M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Features: Computer-optimised tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on any terrain. The robust 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, centre tread blocks help balance weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from drilling into and lodging in the tread. Matching ANR Classics steel rims 8x16" available here in the shop - in the colours: white, black and black primed. To the tyre 275/55R20 120Q P.O.R matching rim Dezent TV black for the New Defender 9x20 inch you will find here. To the tyre 285/55R20 120Q P.O.R matching rim Twin-Monotube-Projekt AT 20 9x20" you can find here.

The areas around the doors are corrosion hotbeds in a Defender. Even though this is a well-known fact, the rust remains very often undetected and keeps eating into structural components and body panels. The doors feature many corners, angles and surfaces that constantly trap water and wet dirt. Screw fittings, rivets, welding points, the combination of different materials like steel, aluminum and rubber as well as mechanical stress often exacerbate the problem. If you are facing large scale restoration work in your 4/5 door Defender, you might consider whether a complete replacement of B and C pillars as well as the door sill isn’t the cheaper, quicker and most of all more thorough solution. We are offering entire sets for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you need to replace only the C posts you can find them here.

Dual battery holder for Land Rover Defender 90/110/130 Td4 / Td5, for easy mounting of two batteries under the driver's seat. The holder is approx. 21 cm high and is suitable for 2x 80Ah Banner AGM batteries or similar models (315x190x175 mm). It can NOT be used with the Land Rover original battery! The holder is made of stainless steel for optimum corrosion resistance. Illustrations may differ.

Retrofit Kit Glove Box Defender TD4 Finally a way to add the much missed glove box for model year 2007-2016 Land Rover Defenders (Puma 2.4 & 2.2). This kit creates storage room for those things you usually have to look for in the driving bay, like flashlight, lighter, mobile, charging cables, etc. The grab handle is re-fitted after fitting the glove box. This kit is made from durable steel/alloy, powder coated in the same colour as the Defender Td4 cockpit. Fitting can be done with vehicle tool kit. Kit is suitable for LHD and RHD vehicles.   Model year 2007-2016

Extension of the seat rails by 50 mm Made of stainless steel and black powder coated, for one seat. Fits all Defenders models from MY 1985 with the exception of military vehicles and those with aftermarked sports seats. The seat rail extensions can be fitted to the original Land Rover seats, the special edition Recaro racing seats, as well es numerous other racing seats. Attached to the original seat mountings in the seat box and respective holes in the seat frames. High-tensile fixings are supplied. The extensions offer more legroom, moving the seats 50 mm backwards and raising them by 30 mm.

Recovery Shackle (rear) for Land Rover Defender Td5 and Td4 Heavy-duty recovery shackle for Land Lover Defender, made from steel. Mounts to the rear bumper.  Surface: zinc primer, black powder-coatedHolepattern: 85x45 mmMax. load: 10 t Incl. heavy-duty bolt with safety pinIncl. hardware