Air intake cover for all Land Rover Defender models (Tdi, Td5, Td4 2.4 and 2.2), set of 3, made of 2 mm aluminium to replace the plastic covers. Powder coated, comes with stainless steel fittings. Image similar

TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997

ANR-Classic - the rim for the Defender. 8x16-Inch steel in such an classical look, that this rim could be easily termed as the earliest form of the Defender rim. But looks are not everything - the max load of 1160 also impresses. The rims provide an optical broadening of the vehicle, which seems only subliminal, because it still emphasises the classic look of the vehicle.  Fits all Land Rover Defender models built until 2016. The ANR-CLASSIC 8X16 inch Zero-Offest / ET0 is produced for Nakatanenga and only available at Nakatanenga and at our reseller. Data sheet:Tyre size: 8X16"Offest: 0 (zero)Max Load: 1,160 kgBolt circle: 165.1 mmCentre Hole: 113 mmCentering: Bolt centering Surface and prices:- black primed - black painted, RAL 9005- white painted, RAL 9010 - white powder coated, RAL 9010 For almost all Defenders ; incl. TÜV certificate.2,25 L Petrol 55 KW (75 PS) - 2,25 L Diesel 45 KW (60 PS)2,5 L Petrol 63 KW (83 PS) - 2,5 L Diesel 50 KW (67 PS)Rover V8 3,5 L Petrol 84 KW (115 PS) und 101 KW (135 PS)2,5L Turbodiesel 63 KW (83 PS) - 200 Tdi 2,5 L 80 KW (107 PS)300 Tdi 2,5 L 83 KW (113 PS) - Td5 2,5 L 91 KW (122 PS)Td4 2,4L 91KW (122 PS) - 2,2 Td Diesel 91KW (122 PS)4BD1 3,9 L 73 KW (98 PS) Approved for following tyre sizes:245/70 R 16 255/65 R 16 255/70 R 16255/85 R 16265/70 R 16265/75 R 16275/70 R 16 285/75 R 16 295/75 R 16

Nakatanenga ventilation panels side windows - Land Rover Discovery 1/2/3/4 The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Window grille for Land Rover Defender 90/110 Window grille, for Land Rover Defender 90/110, for the rear side windows, material: aluminium, anodized, black powder-coated, 1 piece, delivery incl. blind rivets Please also note our optional safety mounting set for these grilles. Suitable for the rear side window of the Land Rover Defender 90/110 or windows of the same size (108x45 cm) Dimensions for mounting: Hole spacing horizontal: 112 cm Hole spacing vertical: 49 cm    

Wheel nut set (23 pieces), zinc-plated, black passivated A love for detail makes the difference and especially high-end steel rims like Dotz, Wolf or our very own ANR Classic for example are easily undervalued by putting old rusty nuts on the studs. Our galvanized and passivated black wheel nuts made from high-quality steel are not only a safe choice but also an aesthetically pleasing one. For a long time. If you are swapping alloy rims for steel, mount your steel winter set or you’ve simply grown to hate these rusty nuts, then this subtle but effective upgrade for all Defenders, Series 2 and 3, Discovery 1 and Range Rover Classics is the one for you. The tough and durable surface is provided by an expert shop: a double Zintek 300B and Zintek Top treatment and a black passivation finish using Techseal Black SL28. The set consists of 23 wheel nuts, including the three nuts for the spare wheel mount. The wheel nuts are suitable for the following vehicles: Land Rover Defender 90 Land Rover Defender 110 Land Rover Defender 130 Land Rover Series 2 Land Rover Series 3 Land Rover Discovery 1 Range Rover Classic OEM part number for a single wheel nut: RRD500010 The wheel nuts are treated twice with Zintek 300B and Zintek Top and then black passivated with Techseal Black SL28 by a German specialist company.