Ähnliche Artikel
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
Modular vehicle panels, incl. Fastening material Are you familiar with that? The Cubby Box overflows, the glove compartment is tiny and long before the car approaches the tipping angle, everything slips or flies through the area, which was "quickly" somewhere stored. Stop it! The modular, MOLLE-compatible panels for seats, headrests and sun visors give everything that must remain within reach within a short time, its place in the vehicle. They expand the existing storage space enormously, are customizable and flexible and can be optimally combined with our MOLLE bags, our tensioning and fastening straps or the Quickfists for attaching heavy objects. The panels are available individually or as a set with our MOLLE bags. Material: PE plastic Available in: 3 X 3 (suitable for headrest - 17,5x15 cm)5 X 3 (suitable for sun visor - 27x15 cm)11 X 9 (suitable for vehicle seat - 57,5x37,5 cm)11 X 9 with bag set11 X 9 with bag set and first aid bag Please note:Quickfist, gloves, ax and our Funky Chicken are shown in the photos - these are NOT included in the delivery! Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Prices incl. VAT;
Universal handle - Provides support where support is lacking - sizes M and L This handle is a great solution where support is lacking. The attachment is simple, ingenious and stable. The holder can be attached with rivets or screws wherever an additional or new handle is required. Areas of application can be, for example: inner car door, as an entry aid on the vehicle, on airline rails, on crates, on the Cargobear and on other roof racks as well as a replacement or supplement for all carrying systems. The handle can also be used for your interior fittings, e.g. for flaps and drawers. Due to the flexible material, the handle is very space-saving and prevents the often painful ‘getting caught’. Material: 100% nylon with PE reinforcements Dimensions size M: Total length: 18 cm Width: 5 cm Distance between the mounting holes: 13 cm Recommended mounting hole spacing: approx. 12 cm Size L dimensions: Overall length: 23,5 cm Width: 5 cm Distance between the mounting holes: 18,5 cm Recommended mounting hole spacing: 16,5 cm Available in: black and grey Set of 1 and 4 Mounting material is NOT included in the scope of delivery! Please note: The item supplied may differ slightly from the photo shown.
Prices incl. VAT;
Single stud fitting for airline cargo lashing rails This robust single stud fitting is ideal for the quick and safe installation of load securing systems on airline lashing rails. With a load capacity of up to 300 kg, it offers reliable support for a wide range of transport applications.The integrated ring with a diameter of 40 mm makes it easy to attach straps, hooks or other securing elements. Manufactured in accordance with the ISO 9788 standard, the fitting fulfils the highest quality and safety requirements.Made from anodised aluminium, it is particularly lightweight, corrosion-resistant and UV and salt water-resistant - ideal for use in demanding environments such as outdoor transport.Note:Depending on availability, delivery is either in a yellow passivated or silver passivated version.
Prices incl. VAT;
Lashing rail fitting, double stud Double stud fitting for airline cargo lashing rails, load capacity 1,100 kg, ring diameter 40 mm, manufactured according to ISO 9788, galvanised steel, UV and salt water resistant.Please note: The studs are delivered either in yellow passivated or silver passivated, depending on availability.
Prices incl. VAT;
Sturdy stainless steel strap cramp - for tensioning straps up to 25 or 30 mm - 10 pieces in a set These high-quality stainless steel strap cramps are ideal for the secure and durable fastening of tensioning straps - for example for mounting luggage nets, tarpaulins or for securing loads. They are suitable for all standard tensioning straps up to a width of 25 mm (design version) or 30 mm (classic version).The strap cramp can be firmly screwed into place and reliably holds the strap in position. Thanks to the robust material, the cramps are particularly resistant to corrosion, even when used permanently outdoors or in damp environments - for example on boats, in vehicles or when camping.Ideally matched to the installation of our cargo net NACN90110 or NACN72948, stable and functional fastening solutions can be realised.Variants: Classic: For strap widths up to max. 30 mm, material: stainless steel A2 Design: For belt widths up to max. 25 mm, material: A4 stainless steel (particularly resistant to seawater) Scope of delivery:10 belt cramps in a set
Prices incl. VAT;
Practical nylon cargo net Can be fastened almost anywhere with tensioning buckles, size approx.: 150 x 100 cm. Made exclusively for us in Germany. Material thickness: 3mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black. 14 lashing points, 150 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Illustration similar Optional: set of 10 belt staples for mounting the net. The net is also available in other sizes on request.
Prices incl. VAT;
Das könnte Sie auch interessieren
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
Cargo net Expedition for Land Rover Defender 90, 110
€169.00
Prices incl. VAT; / Parcel shipping
Cargo net "Expedition" for Land Rover Defender 90 & 110 - Secure your load off-road!
Maximum safety for your equipment:
Robust and durable - ready for any adventure:
Easy handling and flexible application:
Your advantages at a glance:
- Perfect fit: Specially designed for Land Rover Defender 90 and 110.
- Robust quality: High-quality, tear-resistant material for long durability. Versatile, handmade, heavy duty - proven Air Cargo technology for the Defender!
- Secure load securing: Holds your equipment reliably in place.
- Versatile in use: Ideal for off-road trips, expeditions or everyday use. As a luggage net at the top of the hardtop, as a partition net behind the front seats or as a cargo securing net.
- Simple installation: Quick and easy to attach.
- Stylish design: In classic black or grey to match the Defender.
Scope of delivery:
- 1x cargo net
- 14x belt cramps
- 28x fastening rivets