Skip to main content Skip to search Skip to main navigation
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Sanfte Bergsilhouette unter hellem Himmel

Defender, Discovery I & II, RRC

Filter products

Terrafirma Steering Damper Return-to-Centre

Terrafirma Steering Damper Return-to-Centre

Terrafirma Steering Damper Return-to-Centre Steering damper for Land Rover Defender 90/110/130, mounts to original mounting points, assists in self-return of steering.

Product number: TF835
Weight: 3,1 kg
Parcel shipping

Delivery time 10-15 working days

Regular price: €136.00

Prices incl. VAT;

various switch panels for Land Rover Defender Td4/Td5

Switch housings/ brackets for Land Rover Defender Td4/Td5 switches, various versions

Switch housings/ brackets for Land Rover Defender Tdc4/Td5 switches Whether replacing defective or missing components or custom wiring of additional electrical accessories, with our extensive selection of switches (you can find HERE in the SHOP) and matching covers, the original look and feel in the cockpit of Td4/Td5 Defenders is guaranteed to be retained. Exactly matching switch frames can be combined with the switches in various configurations. This means that every installation situation in the cockpit is catered for. 1-gang, 2-gang and 5-gang frames for TD4 and TD5 3-gang frame for TD5 only

Product number: SCHABLE-TD45-1M
Weight: 0,1 kg
Parcel shipping
This article is available in different versions

Regular price: From €27.00

Prices incl. VAT;

EBC Greenstuff 6000 Brake Pads

EBC Greenstuff 6000 Brake Pads for 4x4 and SUV

EBC Greenstuff 6000 brake pads EBC Greenstuff 6000 brake pads have been designed for heavy off-road vehicles and SUV that need to be stopped fast and efficiently both on and off the road. The Greenstuff pad is tried and tested and is proven to stop your car approx 20 feet (9 metres) quicker than standard Pads from 60mph which is a an impressive braking improvement of 15% offering better brake effect up to 600°C (1100°F) with almost no brake fading. The Greenstuff pads will work better at higher temperatures than standard pads giving you confidence for spirited street driving and perform well on cars under 200 bhp. Features: Capable of repeated heavy brake use without brake “Fall-Off”. Very minimal disc/rotor damage characteristics. ECE R 90 type approved for most cars. Features red “brake in’ surface coating for instant safe braking after install. The brake pads are supplied in pairs, i.e. as a full set for one axle. The pads can be supplied for a large variety of vehicles. Please choose your desired vehicle:

Product number: NADP6-1033M
Weight: 3,1 kg
Parcel shipping
This article is available in different versions

Regular price: €135.00

Prices incl. VAT;

Spring Cones, Rear Axle for Land Rover Defender 90

Spring cones rear axle for Land Rover Defender 90, RRC, Discover I

Rear Axle Spring Cones Land Rover Defender 90, RRC, Discovery I – For maximum articulation and secure spring guidance! You know it: In extreme terrain, when your suspension is pushed to its limits, it can happen that the springs leave their seats at maximum droop. To prevent this and ensure your springs are always guided securely back into position even with extreme articulation, we offer our spring cones for the rear axle of your Land Rover Defender 90, Range Rover Classic, or Discovery I. What exactly do spring cones do? If the travel of your shock absorbers is longer than that of your springs – which is often the case with lift kits or special off-road suspensions – the coil springs can pop out of their upper mounts at full droop. The spring cones, also known as spring relocation cones or spring guides, are mounted at the top of the frame and ensure that the spring is guided precisely and "cleanly" back into its original position during compression. This prevents damage and ensures the consistently safe function of your suspension. Your advantages at a glance: Secure Spring Guidance: Prevents the spring from slipping out uncontrollably at maximum articulation. Protection for Your Suspension: Prevents damage to springs and other suspension components. Optimal Off-Road Function: Ensures that your suspension works reliably even under extreme conditions. Perfect Fit: Specifically designed for the rear axle of the Land Rover Defender 90, Range Rover Classic, and Discovery I. Robust Design: Manufactured for the tough demands of off-road use. Scope of Delivery: You will receive the spring cones as a pair. Important Note: These spring cones fit with original springs or with Trekfinder springs. Whether this item fits other aftermarket springs must be checked on a case-by-case basis due to potentially thicker wire gauges. They are not suitable if auxiliary springs are used. Give your suspension that extra bit of safety and performance in the field. With these spring cones, you are well-equipped for demanding passages!

Product number: CO-HA-90
Weight: 3,4 kg
Parcel shipping

Delivery time 10-15 working days

Regular price: €135.00

Prices incl. VAT;

Nakatanenga Kabelbaum Einspritzdüse für Land Rover TD5

Wiring Harness Injector for Land Rover

Wiring harness injector Harness injector pump element suitable for Land Rover Defender Td5 and Discovery 2

Product number: NA-AMR6103
Weight: 1,5 kg
Parcel shipping

Delivery time 20-25 working days

Regular price: €133.00

Prices incl. VAT;

MUD Konsole für Defender TDI

MUD Console for Defender TDI

Universal console for Defender For radio, radio set, additional instruments etc., piece - delivery without instruments or switches.

Product number: MUDRK-IM
Weight: 2,5 kg
Parcel shipping
This article is available in different versions

Regular price: €132.00

Prices incl. VAT;

Wind deflector for Defender

CargoBear wind deflector for Defender-CargoBear roof racks

Wind deflector suitable for Nakatanenga  CargoBear 2.0 Land Rover Defender Material: aluminium, black matt powder-coated Incl. Mounting material Suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.

Product number: CGB2-DEF-WIND
Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €130.00

Prices incl. VAT;

Nakatanenga Türpolster Lederarmlehne Land Rover Defender

Armrest for Land Rover Defender 90/110/130

Leather armrest for Land Rover Defender Our armrest for the doors of your Land Rover Defender 90/110/130 is just that bit of extra that adds a whole new level of comfort - even on long journeys. Finally you can rest your elbow comfortably, making driving so much more relaxing and safe. Our armrest is made of an intricate aluminium subframe which is covered by hand in naturally tanned leather (black). The rest is available either for left or right hand side doors or, with a saving, as a bundle for both doors. No drilling required. Please choose.

Product number: NATPDEF-L-BLKM
Weight: 1,1 kg
Parcel shipping
This article is available in different versions

Regular price: From €69.00

Prices incl. VAT;

wind deflector Defender

CargoBear Wind Deflector for Defender-CargoBear - SLIDE

Wind deflector - suitable for Nakatanenga CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element Material: Aluminium, black matt powder-coated RAL 9005 incl. fixing material the wind deflector extends the CargoBear by 10 cm. lightbars or headlights can be mounted on the wind deflector. suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.  

Product number: CGB2-DEF-WINDSCHRAEG
Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €130.00

Prices incl. VAT;

Fuel filler cap for Land Rover Defender

Fuel filler cap for Land Rover Defender TD4 and TD5

Fuel cap lockable Matte black, resistant to corrosion and UV exposure and featuring a classic design - the Offroad Monkeys’ fuel cap is a real upgrade for classic Landies Td5/Td4 and a whole range of other models from the Alfa Romeo GTV (up to MY 2005) to the Volvo XC70 (from MY 2007). Made of high-strength aluminum, this replacement fuel cap is simply perfect in form and function. Very easy on the eye and very pleasant to handle, it is of course lockable as well. 100% Made in Germany. Delivery includes 2 keys. Note: the filler cap does not fit the new Defender models from Bj. 2020 (new series)  

Product number: TADE-TD45
Weight: 0,3 kg
Parcel shipping

Delivery time 5-10 working days

Regular price: €129.00

Prices incl. VAT;

Repair plate rear tub, 3 pieces, Defender 110 - My 2007-2016

Repair plate rear tub, 3 pieces, Defender 110 Td4, Td5 and TDI

Repair panel rear sump for Defender 110 Td4, Td5 and Tdi Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets. For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way. Please select: Complete set 3 pieces consisting of:  Repair plate main part and 2x corner parts 2-piece set consisting of: 2x corner pieces  

Product number: REPBLEHEWAM
Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: From €69.00

Prices incl. VAT;

Mounting bracket Webasto Theromotop for Land Rover Defender Td4 2.2 and Td4 2.4

Mounting bracket Webasto Thermotop EVO5

Webasto Thermotop EVO5 mounting bracket Stainless steel bracket for mounting the Webasto Thermotop EVO5 water heater or AUTOTERM flow in the Land Rover Defender TD4 2.2 or 2.4. Existing mounting points are used to attach the parking heater, the required stainless steel mounting material is included with the parking heater bracket. Stainless steel and rust information sheet Important note: the mounting bracket only fits if the air intake in the engine compartment has been adapted (e.g. with our optimised air intake or our SN4 snorkel systems)    

Product number: NAWEBTTEVO5-2.2M
Weight: 2,1 kg
Parcel shipping
This article is available in different versions

Regular price: €129.00

Prices incl. VAT;

ClipsKit-Big

ClipsKit-Big - Box with clips, plastic rivets, Counter bushes 280 pcs.

Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer

Product number: CLIKIBI
Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €129.00

Prices incl. VAT;

With clamp closures for easy filling

Cargo Net Mesh for Land Rover Defender until BJ 2016

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

Product number: CN-DEF-BLKM
Weight: 1,2 kg
Parcel shipping
This article is available in different versions

Regular price: €129.00

Prices incl. VAT;

Release bearing from L.O.F EXTREMEspec

LOF Clutches EXTREMEspec Release Bearing for 2.5Na & Stumpy R380 Gearboxes

EXTREMEspec release bearing strong and reliable The EXTREMEspec release bearing has been made not only strong and reliable, but also durable by adding a simple feature that allows grease to be used on the surface of the guide tube. Oil rings keep the grease in place and protect it from contamination. This grease barrier not only protects the release bearing, but also the guide tube itself. It also minimises clutch release bearing rattling, a common problem that causes a loud rattling noise at idle due to lack of grease and poor design tolerances. Fits 2.5NA Millitary transmissions and Stumpy R380 from Ashcroft Transmissions

Product number: UTJ100210
Weight: 0,8 kg
Parcel shipping

Delivery time 20-25 working days

Regular price: €129.00

Prices incl. VAT;

Nakatanenga drehbare Edelstahl-Bergeöse für Defender 90 110

Recovery Shackle (rotating) for Land Rover Defender

Swivel stainless steel recovery point with stainless steel shackle for the highest demands. Designed for the OEM front bumper on the Land Rover Defender 90/110/130. This recovery point is an indispensable accessory for serious off-road enthusiasts and professional users who rely on maximum reliability and safety during recovery operations. Developed for demanding use, this swivel recovery point offers superior performance and durability. Robust Construction for Maximum Safety Made from high-quality stainless steel, the recovery point is characterized by its extreme robustness. The mounting adapter, the shackle, even the retaining ring are made of stainless steel. Rust is therefore a thing of the past here. The main structure is solidly bolted and designed for high loads. This massive construction ensures that the recovery point can withstand even the harshest conditions and high tensile forces. The careful workmanship and material selection guarantee a long service life, even with regular and intensive off-road use. Optimal Flexibility thanks to 360° Swivel Function A special feature of this recovery point is its 360° rotatable stainless steel shackle pin. This feature allows for the flexible attachment of recovery shackles or ropes from various angles without causing adverse lateral loads on the recovery point or vehicle structure. This is particularly advantageous in rough terrain, where the vehicle to be recovered is often not ideally positioned. The swivel function minimizes the risk of material fatigue and increases safety during the recovery process by ensuring optimal force transmission. Thoughtful Design - Additional Feature This swivel recovery point is not only functional but also thoughtfully designed. The edges of the recovery point are rounded, which ensures optimized pedestrian protection and minimizes the risk of injury. Rely on the swivel recovery point from Nakatanenga – your strong partner when it matters most.

Product number: BEODBSS
Weight: 5,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €129.00

Prices incl. VAT;

Nakatanenga Riffelblech Hecktraverse für Land Rover Defender

Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender

Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Product number: NARBHT-ELM
Weight: 3,0 kg
Parcel shipping
This article is available in different versions

Regular price: From €109.00

Prices incl. VAT;

universal joint hd prop shaft

Heavy Duty Prop Shaft - replacement universal joint

Replacement universal joint for heavy duty propshaft with 25° articulation angle. All spare parts available off the shelf. Made in Germany!

Product number: WWGWXXKG
Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €129.00

Prices incl. VAT;

End profile, angle strip

profile for body rear or rear tub, 3-pcs

profile for body rear or rear tub, 3-pcs Spray from wet roads, rain water, dirt, chemicals and mechanical stress all take their toll on the rear of the classic Defender (up to MY 2016) and the Land Rover Series III, especially on the trim strip under the edge of the tail gate. This aluminum profile helps to seal the door and the cargo hold, it protects the loading edge and also holds down the carpet or floor mat in the cargo area. No wonder that it frequently has to be replaced, whether it’s for visual defects or functional degradation. Our replacement profile matches the Land Rover OEM part (AQR710020) in form, function and quality, but offers a lot more value for money, as it only costs about half as much. 

Product number: WILEI-KAROHECK
Weight: 1,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €129.00

Prices incl. VAT;

Land Rover Headlight Protectors

Land Rover Headlight Protectors

Land Rover Headlight Protectors Protection for the main headlights of the Land Rover Defender, made of Makrolon, original Land Rover part, without E-mark, delivery in pairs.

Product number: STC7561
Weight: 0,6 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €125.00

Prices incl. VAT;

Nakatanenga 13-poliger E-Satz mit AMC Modul für Defender

13-pin E-Kit Universal, with AMC module, for Land Rover Defender up to and including MY98 and other vehicles

13-pin E-kit for Land Rover Defender up to and including MY98- also suitable for other vehicles.   A 13-pin e-kit offers the advantage over a classic 7-pin e-kit that it can be used to supply additional consumers. These can be rear fog lights or reversing lights as well as parking aids. The Jaeger plug-in system in particular has established itself as a permanent fixture on the market and has become indispensable for rear carriers and caravans. The advantages of a 13-pin E-kit are obvious and always justify the slightly higher purchase price compared to a 7-pin E-kit.   Including JAEGER AFC trailer control module for automatically increasing the flashing frequency.    

Product number: NA219712400006
Weight: 2,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €120.00

Prices incl. VAT;

Radiator cover for all Land Rover models

Nakatanenga radiator cover 2.0 for all Land Rover Defender models

Radiator Cover for Standard Grille The Nakatanenga radiator cover helps your Defender’s engine reach its optimal operating temperature faster during the cold season – improving both engine efficiency and cabin heating performance.   This cover is designed to fit the standard radiator grille (including Heritage style) and all Nakatanenga aluminium grilles of all Land Rover Defender models, with or without air conditioning.   The cover is screwed onto the mounting points of the radiator cover.    For maximum versatility, the radiator cover can be used in three configurations: fully closed, half closed (top or bottom), or fully open.   Manufactured to U.S. military specifications (MIL-SPEC) and according to Nakatanenga’s own high standards. Includes FitKit.

Product number: KADDEFDB-UNI-BLK
Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €119.00

Prices incl. VAT;

Defender Puma glow plug connector

Repair kit for Land Rover Defender TD4 2.4 and TD5 glow plug connectors

Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs

Product number: GLUEKERSTECK-4
Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €119.00

Prices incl. VAT;

Ventilation grille for Defender MY2016

Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016

Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.  Length 2 slats: 215mmLength 3 slats: 270mm The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)   If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)   Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Product number: LBLH-2LAM-DEF-LM
Weight: 0,7 kg
Parcel shipping
This article is available in different versions

Regular price: €119.00

Prices incl. VAT;

Kit Tempomat Defender TD5

Cruise control for Land Rover Defender Td5 MY02-MY07

Cruise control for Land Rover Defender Td5 MY02-MY07 Especially on longer journeys, it's quite tiring to hold the throttle in the Defender. Our new cruise control puts an end to that.Now, at the touch of a button, Defender will maintain the desired cruising speed. The cruise control takes over the current speed and maintains it - exceptions:    if the engine power is insufficient (e.g. high speed and at the same time a significant rise in the road), the cruise control switches off for safety reasons.     when the brake or clutch pedal is pressed.The cruise control is operated via 2 supplied stainless steel buttons:    a SET button to hold and increase the current speed.     a RESET button for switching off the cruise control, as well as for resuming the last set speed.The delivery is made as a complete set incl. detailed and illustrated instructions, which also enable "occasional screwdrivers" to assemble it.Time required: about 1-2 hours.Conclusion: A "must" for all those who often drive on the motorway or undertake long-distance journeys - even the journey to the port in Genoa, for example, becomes a "relaxing" experience...Please note: Really only suitable for Td5 MY02-MY07. The decisive factor is the installed control unit. The identification number of the control unit must start with NNN or NNW! If the identification number begins with MSB, this cruise control is not suitable.

Product number: TEMPDE
Weight: 0,2 kg
Parcel shipping
Expected to be available again at the end of February 2026.

Regular price: €119.00

Prices incl. VAT;

Clutch slave cylinder Defender TD4 from 9A000001

Clutch slave cylinder for Defender TD4

Clutch slave cylinder for Defender TD4 You can choose between a clutch slave cylinder for Defender TD4 up to chassis number 8A999999 and a clutch slave cylinder for Defender TD4 from chassis number 9A000001.ATTENTION: Occasionally, different clutch release bearings may have been fitted by previous owners. If you are not sure which clutch slave cylinder you need for your release bearing, please order the other clutch slave cylinder. You can then test both and return the non-fitting part to us within 4 weeks in its original packaging.

Product number: 9AHDKUPM
Weight: 0,5 kg
Parcel shipping
This article is available in different versions

Regular price: From €105.00

Prices incl. VAT;

Overview splash guard holder Land Rover Defender 90 / 110, black powder-coated

Mud flap holder for Land Rover Defender 90 and 110, until MY2016

Spray Flap Holder for Land Rover Defender 90 and 110 Stainless steel holder for Land Rover Defender 90 and 110 (all years of manufacture), for optional front or rear axle, Supplied in pairs, including mounting hardware. IMPORTANT NOTE: If you still want to build corner protectors on the Land Rover Defender 90 or if you have already attached them, you need the flap holders WITH recess (select "vehicle type"). The original spray flap brackets are made of painted steel. Anyone who has been driving a Defender for a long time knows that every few years the brackets rust through, as the paintwork flakes off over time and dirt, oily deposits and constant moisture provide the perfect conditions for corrosion. Our own custom-fit splash guard brackets are not only made of stainless steel, but are also powder-coated black. This makes them extremely robust, corrosion-resistant and durable. This finally puts an end to the constant replacement of the holders. Of course, existing splash flaps can still be used.Suitable for Land Rover Defender up to MY2016. If you want to be on the safe side, we also have matching edge reinforcements for the splash guard holders. Supplied in pairs.

Product number: NASLHVA-PBM
Weight: 1,5 kg
Parcel shipping
This article is available in different versions

Regular price: From €69.00

Prices incl. VAT;

Nakatanenga Differentialschutz Discovery 1 vorne hinten

Differential Guard, Discovery I, front and rear

Differential protection for Land Rover Discovery 1 for front and rear differential  Few components on an off-roader are as exposed as the differentials of the front and rear axles. It doesn't take long for costly damage to occur when hitting a stone, which usually cannot be repaired on site and therefore means the end of the journey. What is annoying in the off-road park at home can quickly become dangerous in more remote regions of the world. We have therefore designed appropriate protective devices for the various axles of the Land Rover Defender, which protect the differential covers from damage and in some cases also allow easier sliding over the obstacle.

Product number: DG-DIS1-VH
Weight: 2,1 kg
Parcel shipping

Delivery time 10-15 working days

Regular price: €118.00

Prices incl. VAT;

Nakatanenga Lampenschutzgitter Typ Q für Defender Rückleucht

Nakatanenga Lamp Guard Type Q for Indicator/Brake/Position Lights, Pair

Protective grille for blinker, brake and parking lights Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)

Product number: NASGQBBL-VAPB
Weight: 0,4 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €118.00

Prices incl. VAT;

Door hinges Land Rover Defender MY1986 rear right

Door retaining strap kit REAR left or right for Defender from MY1986

Door retaining strap kit REAR left or right for Defender from MY1986 Doors on your classic Landy are not exactly soft close, like on a Rolls Royce, to put it mildly. The rudimentary mechanism has to put up with a lot, so wear and tear is inevitable. Our high-quality door check strap kit for the second row doors is ideal for repair jobs and upgrades because it is designed to last. The components are extremely robust and the workmanship is precise. Installation at the original mounting points is therefore quick and easy. All mounting materials are included.   Suitable for all Land Rover Defenders from MY 1986 onwards.    PLEASE NOTE: The standard door stay bracket is not included. Please take a look at our article TOEWDEF.   Door catch kit for the front can be found here.  

Product number: TUEFABA-HILIM
Weight: 0,9 kg
Parcel shipping
This article is available in different versions

Regular price: €114.50

Prices incl. VAT;

LT230ATB Mounting Kit

LT230 ATB installation kit

LT230ATB installation kit required for the Ashcroft LT230 ATB The kit contains: Collapsible spacer  Nut for the intermediate bolt  Centre diff nut  2 x O-rings  2 x Timken bearings  8 x washers  Silicone sealant Torsen locking differential as centre differential for the LT230 transfer case can be found here in the shop !

Product number: LT230-FITKIT
Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Regular price: €114.00

Prices incl. VAT;

Defender braided brake lines

Stainless Steel Brake Hose Kit for Land Rover Defender

Improved braking performance & durability After having been proven and tested for many years, stainless steel brake hoses are now becoming accepted in the off-road scene. The advantages the steel braided PTFE hoses have over customary rubber brake hoses are manifold: no expansion of brake lines under braking no expansion due to hot brake fluid under frequent braking very precise brake response no loss of braking power, resulting in shorter stopping distance precise modulation of braking power improved protection from damage through stones, branches, etc., especially important when off-road driving individually tested by manufacturer at 400 bar pressure New and only at Nakatanenga: these steel braided hoses for Land Rover Defender come with a special mount and fastening material to ensure safe mounting of the brake lines to the rear axle. This in-house developed mounting is made from stainless steel and thus also corrosion free. Our brake lines are 50 mm longer than the original hoses and thus suitable for larger axle travel, e.g. for lifted vehicles. They are sufficient for vehicle lifting kits upt to 90 mm. If you require different lengths, please contact us. These brake lines come with a TUV certificate of approval. In Germany such changes to the brake lines have to be TUV registered for your vehicle. We recommend to check brake fluid level and if necessary a replacement of the brake fluid. The hydraulic system has to be bled after fitting new brake lines. Any work on the braking system should always be carried out by a trained mechanic! Please choose the model year of your Land Rover Defender and whether it has ABS fittedor not: Stainless steel braided brake lines for all Land Rover Defender; 50 mm longer than standard. NEW: with Nakatanenga stainless steel rear axle mounting kit! PLEASE NOTE: The retaining plate is available in a serrated and round shape. NO adjustments need to be made for the round shape.   

Product number: SFB-DEF-2003M
Weight: 0,4 kg
Parcel shipping
This article is available in different versions

Regular price: From €106.00

Prices incl. VAT;

Land Rover Defender accessories, Discovery and Range Rover Classic parts

The Defender has a soul, or so many say. And maybe they’re right, because sometimes it really feels that way. It takes you anywhere, even to places where others would have given up long ago. In return it needs care, tools and patience. It rattles, makes noises and has never pretended to care much about perfection. But anyone who knows it understands: that’s exactly its charm. There’s hardly anything more satisfying than working on this piece of British engineering yourself – or, if the spanner slips, at least impressing with a bit of technical knowledge.

For everyone who prefers to wrench themselves or have things professionally fitted, the Nakatanenga shop is a treasure chest full of Defender accessories and Defender spare parts. You’ll find everything needed to get the old Brit back into shape or turn it into a proper overland vehicle.

From bumpers to snorkels – the right Defender accessories for the road ahead

If you want to turn a Defender into a travel vehicle, you need more than good spirit and a full tank. A winch bumper, for example – not because you’ve bogged yourself down, of course, but purely to pull everyone else out. We recommend our Nakatanenga winch bumper for the Defender, available as a bundle with winches from Horntools or Superwinch, with or without auxiliary lights.

But there are moments when no prayer helps, only proper recovery gear. With recovery points, rear crossmember reinforcements and traction boards, you stay in control even when the ground decides to create its own adventure. Everything is robust, tested and ready for real-world off road use.

If you’re planning long distances far from civilisation, it’s best to upgrade with a 56-litre auxiliary tank or a 66-litre version, while the Defender underbody protection ensures sharp rocks, roots or curious boulders don’t leave deeper marks. Rock sliders protect the sides. You’ll find all of that in our protection category.

The Defender snorkel, or raised air intake, is essential for anyone heading into desert regions or water crossings – though even Hamburg puddles can look surprisingly deep. Available for Td4, Td5 and Tdi in different versions for Defenders with or without roll cages.

Defender suspension, wheels and tyres

No adventure without proper suspension. A Defender suspension kit isn’t about taste, it depends on how you use the vehicle. Whether it’s a 90, 110 or 130, there’s a setup for every purpose – from a family daily driver to a fully loaded long-distance touring vehicle. For the right off road look, you can add steel wheels such as our classic ANR wheels, Wolf wheels or equally robust Dotz Dakar wheels.

If you don’t want to search endlessly for a workshop that can balance Defender tyres properly, simply choose fully mounted wheel sets. Everything about wheels and tyres can be found here.

Interior with character – sports seats for the Defender

If you cover long distances, you should sit comfortably. With new seat foams you can preserve the original Defender seat charm, Defender sports seats add modern support on rough tracks, and matching seat covers protect the material or hide the scars of past expeditions. Classic style returns with the right Defender steering wheels.

And then there’s the sort of Defender accessories that make you wonder why Land Rover never fitted them from the factory: leather door handles, a proper glove box, a sturdy A-pillar grab handle so getting in doesn’t feel like a mini mountain climb every time.

Seat rail extensions – apparently British engineers didn’t know tall legs. A two-colour interior light, a handy rear cubbybox tray and of course the rear door strut that stops the door from hitting your back when the Defender is on uneven ground.

Dual battery system, electrics and lighting – power where you need it

Whether it’s a heater, laptop, fridge or phone, you need power on the road. That’s why one of the first upgrades many Defenders receive is a dual battery system. Ours comes with a stainless steel bracket for two Banner 80Ah batteries, including wiring loom and split relay. You can add a battery monitor if desired. Perfectly matched with the bonnet solar panel for Td5 and Td4.

In the lighting section you’ll find everything from 7-inch headlights and LED indicators to light bars from Osram and Vision-X, plus a matching lamp bracket. Reversing lights, interior lighting and a number plate light with camera are also part of the range.

Roof racks, storage and order in the chaos

The CargoBear roof rack for the Defender is almost too good-looking to load up. Flat, walkable, with pass-throughs and made for our Roof Lodge tents, mounted with a quick mount system that works with different roof tents. Perfect accessories for the Defender roof rack include our outdoor shower, the Nakatanenga Shower Tube, and the Roof Lodge Evolution 2 awnings. On top fit the Nakatanenga storage boxes and the large 198-litre aluminium box – enough room for tables, chairs and all the “just-in-case” bits.

For even more storage, there’s the discreet wing box, side boxes, the valuables compartment for the cubbybox, or the footwell storage box. The tailgate organiser with MOLLE pouches brings order to the rear, the cargo net under the roof liner uses every inch, and the window guards with MOLLE system expand storage further.

Parking heater for the Defender

A parking heater transforms the Defender into a winter-ready travel vehicle, especially when neatly integrated with the cubbybox extension. If you want warm showers, add the Warmduscher kit. Alternatively, the mobile parking heater in an aluminium box also warms the roof tent – or the garden pavilion if needed.

Maintenance, repairs and Defender spare parts

After the trip is before the next one. Brakes, exhaust, prop shafts – anyone who knows where the dirt hides also knows where lubrication is needed. Our range includes all essential Defender spare parts, from wheel bearings and air filters to exhaust and gearbox parts, and even full body panels including galvanised chassis for Defender and Discovery. Whether it’s a minor service or full restoration – everything a Land Rover Defender needs is here. Many parts also fit the Discovery I, Discovery II and Range Rover Classic. When unsure, just call our service hotline.

If you prefer leaving the work to professionals, our in-house workshop is ready. Specialised in Defenders, we handle everything from auxiliary tank installation or parking heaters to dual battery systems and differential locks. We also carry out full restoration projects and the overhaul of Defender gearboxes or engines.

Nakatanenga – your online shop for Defender accessories and spare parts

The Defender isn’t a vehicle for perfectionists. It’s a rolling adventure, a drivable project and a touch of madness on wheels – provided you have the right Defender accessories and Defender spare parts. But in return you get something no modern SUV offers: honest mechanics, real stories and the reassuring feeling that you can fix almost anything yourself if needed.

  • Everything for Defender modifications, repairs or full restoration: At Nakatanenga you’ll find Defender spare parts, body components and accessories – from practical to extraordinary.
  • Don’t want to work on your Defender yourself? Just call and book an appointment. Our workshop specialises in the British icon and handles everything from simple tyre changes to full Defender restorations.
  • Looking for a Defender roof rack? One that sits low and looks seriously good? We say: the CargoBear is your answer.
Nakatanenga 24/7 SupportBear

Hello, how may we help you today? And by the way: We also speak any other language :)