Shop by vehicle
EBC Greenstuff 6000 Brake Pads for 4x4 and SUV
EBC Greenstuff 6000 Brake Pads EBC Greenstuff 6000 brake pads have been designed for heavy off-road vehicles and SUV that need to be stopped fast and efficiently both on and off the road. The Greenstuff pad is tried and tested and is proven to stop your car approx 20 feet (9 metres) quicker than standard Pads from 60mph which is a an impressive braking improvement of 15% offering better brake effect up to 600°C (1100°F) with almost no brake fading. The Greenstuff pads will work better at higher temperatures than standard pads giving you confidence for spirited street driving and perform well on cars under 200bhp. Features: capable of repeated heavy brake use without brake “Fall-Off”. very minimal disc/rotor damage characteristics. ECE R 90 type approved for most cars. features red “brake in’ surface coating for instant safe braking after install. The brake pads are supplied in pairs, i.e. as a full set for one axle. The pads can be supplied for a large variety of vehicles. Please choose your desired vehicle:
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM suitable for all Jimny models of the type GJ built from the end of 2018 and Type HJ suitable for all engine and transmission types from 3 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle
Prices incl. VAT;
Nakatanenga Military Snow Cover - Stainless Steel
Stainless steel cover for air intake Military snow cover from stainless steel exclusively for Nakatanenga fits Land Rover Defender 90/110/130 (all model years) and reliably prevents the ingress of water, snow or dead foliage into the heating system. If independent vehicle heating is fitted, this will also always get enough clean air to work properly. Originally developed for the military Wolf-type Defenders, this military snow cover is also highly useful for civilian vehicles. The sturdy cover can be stepped on and is available for LHD and RHD vehicles. It can be fitted with or without chequer plate wingtop protection. Fitting simply means swapping the original cover and attaching the MSC with the six supplied stainless steel screws. Takes about 10 minutes. A new seal is supplied, too. Please choose desired type.
Prices incl. VAT;
A-Frame Ball Joint, 45° operating range, for Land Rover Defender, Discovery and RRC
A-frame ball joint with 45° operating range for improved rear axle articulation, suitable for Land Rover Defender 90/110/130, Discovery and Range Rover Classic. This A-frame ball joint replaces the standard ball joint and offers greatly improved articulation due to its operating range of 45° (as compared to ca. 30° for the OE part). This ball a-frame ball joint can be used with standard suspension or suspension lifts and also with cranked rear radius arms.
Prices incl. VAT;
Mid Silencer Replacement Pipe SPECIAL Land Rover Defender 90 Td5/Td4
Mid silencer replacement pipe 90 SPECIAL for Land Rover Defender 90 Td5 / Td4 replaces the standard mid pipe main silencer. Results in deeper, more throaty engine tone and reduced back pressure, which also results in cooler manifold temperatures. Most customers who have replaced the mid pipe with our performance pipe confirm better throttle response. An additional benefit is lowered cabin temperatures due to faster and more efficient heat dissipation. Material: stainless steel
Prices incl. VAT;
Performace Mid Pipe replacement for Land Rover Defender Td5 / Td4
More Sound, Freer Breathing: The MSD Exhaust Pipe SPECIAL for Your Defender 110 Td5 / Td4! Do you want to give your Land Rover Defender 110 (Td5 or Td4) not only a throatier sound but also ensure optimized exhaust flow? Are you looking for a high-quality solution that replaces the standard center silencer and gives your Landy a special touch? Then the MSD Exhaust Pipe SPECIAL is exactly right for you! This specially developed replacement pipe takes the place of the original center silencer and lets your Defender "breathe" more freely. The result is not only a more present and sonorous sound that underscores the character of your vehicle but also potentially improved responsiveness. Why the MSD Exhaust Pipe SPECIAL for Your Defender 110? Throatier, Sportier Sound: Experience a more distinct and characterful exhaust note without being excessively loud or obtrusive. Optimized Exhaust Flow: By eliminating the center silencer, exhaust gases can flow more freely. This can positively impact your engine's responsiveness and agility. High-Quality Manufacturing: The pipe is made from robust stainless steel and designed for the stresses of everyday Defender life as well as off-road conditions. Perfect Fit for Td5 & Td4: Specifically developed for Land Rover Defender 110 models with Td5 and Td4 engines, ensuring a good fit and straightforward installation (in place of the original center silencer). The "SPECIAL" Extra: This version is designed to offer an optimal balance between sound enhancement and everyday usability. Important Note: Please be aware that this pipe replaces your vehicle's standard center silencer. The use of such a replacement pipe may affect your vehicle's operating permit and may not be legal in all countries or for all purposes. Please inform yourself about the applicable regulations in your region before purchasing and installing. It is often a popular modification for off-road use or on private property. Give Your Defender the Voice It Deserves! With the MSD Exhaust Pipe SPECIAL, you're investing in a noticeable plus in sound experience and a touch more dynamism. Ideal for anyone wanting to give their Defender a more individual and powerful note. Do you have questions about installation, compatibility, or legal aspects? Don't hesitate to contact us – we at Nakatanenga are happy to advise you!
Prices incl. VAT;
Wheel nuts for steel rims New Defender, black
Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4. The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28. Scope of delivery: 23, 5 or 1 pcs
Prices incl. VAT;
Electronic blower control for Land Rover Defender
Blower control for Land Rover Defender Fan and heater in classic Defenders are notoriously poor in performance and reliability – especially in northern latitudes, where cold winters and rainy days regularly impair comfort and safety in the cockpit. While Land Rover upgraded to an improved fan heater for the Td4 (MY 2007), all previous models can easily be retrofitted with an electronic control system. In contrast to the old analog fan heater, the new electronic control system allows for continuous adjustments. This ensures more efficient operation and therefore better ventilation, heating and dehumidification in the interior. Heating your vehicle’s interior can be achieved much quicker, as is demisting or de-icing of the windows. Additionally, the electronic control is much less prone to wear than the old mechanical solution using sliders and resistors, which are susceptible to shocks and vibrations. The retrofit kit includes the electronic control, a stepless slider and all the assembly parts for the connections. Installation instructions are included.
Prices incl. VAT;
Wheel spacers TREKFINDER for LAND ROVER Range Rover LG/ LW, 44/40 millimetres
Wheel Spacers TREKFINDER for LAND ROVER Range Rover Type LG, Range Rover Sport Type LW - Widening per axle +44 mm / 40 mm millimetres - made of high-strength and black hard anodised aluminium alloy - incl. fixing material - incl. parts certificate - Scope of delivery for 1 axle
Prices incl. VAT;
Stainless steel bolt set for Land Rover Defender 110 SW / 110 CC / 130 CC
Stainless steel screw sets for Land Rover Defender NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover shape.The screws have the identical heads as the original screws on the Defender!!!set comprises a total of over 440 parts. With this set, all externally visible screws on the vehicle can be replaced with high-quality, rust-free V2A stainless steel screws.Suitable for all model years - TDi, TD5, TD4 2.4, TD4 2.2The side door and rear door hinge screws, as well as the screws for the body mounting at the rear, are specially manufactured for us and correspond in shape to the original screws (Torx tool holder).The pack also contains hood bumper screws specially manufactured for us.The screw sets are clearly arranged in 10 bags for each part of the vehicle: Rear door hinges Rear body mounting Radiator grille Cargo bed strip + reflectors Hood hinges Rear cross member Spare wheel holder Headlight covers + mudguard covers Side door hinges Inner door sill + A-pillar + 2 bumper screws + anti-seize paste Simple installation is possible even for car amateurs.We also supply an anti-seize paste for the screws.Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB) Note: The screws for the door hinges may have to be shortened. The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Cubby Box - Centre Console Defender
Cubby Box - Centre Console Defender With this cubby box, you can be sure that small items such as mobile phones, pens, torches etc. flying around in the vehicle are a thing of the past. For example, it can be mounted between the front seats or instead of the middle seat. Can also be used as an armrest thanks to the upholstery. With cup holders in the front area. Interior trim: velourHinges: brassDimensions: 485x270x260 mm (LxWxH) Price per piece Please note:Suitable for Land Rover Defender until MY2016
Prices incl. VAT;
Performace Mid Pipe replacement for Land Rover Defender 110 Tdi
Replaces the main silencer: MSD exhaust pipe 110 SPEZIAL for Tdi Motorsport accessory, not street legal The “effects” are: Sonorous sound and significantly lower back pressure, which also reduces the temperature at the manifold. The sound is “rich” - just as it should be for a diesel. It is not noticeably louder when the windows in the interior are closed. Of course, the whole thing is not road-legal and can therefore only be driven on non-public roads or abroad. Most customers who have replaced the center silencer with our pipe also speak of better pulling power, which we can also confirm. Another advantage is the overall lower exhaust gas temperature, which not only benefits the engine but also leads to a desired reduction in temperatures in the footwell - similar to illustration - Material: Stainless steel
Prices incl. VAT;
Nakatanenga ventilation panels front side window- Peugeot Partner / Citroen Berlingo MY 2008-2018
Nakatanenga ventilation plates for Peugeot Partner / Citroen Berlingo MY 2008-2018 side windows front The Citroën Berlingo is a practical all-rounder that serves both families and tradespeople well. With the custom-fit ventilation panels for the front side windows, the interior remains pleasantly ventilated even on warm days, while rain, insects, and uninvited guests are reliably kept out. The robust, black powder-coated aluminum panels blend inconspicuously into the vehicle's appearance and ensure a pleasant climate – ideal for trips with dogs or longer breaks on the road. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 620 mm Material: Aluminum, black powder-coated Note: Ventilation panels on the driver's and passenger's side must not be used while driving! <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Terrafirma Steering Damper for Land Rover Defender, Adjustable
Terrafirma Steering Damper for Land Rover Defender, adjustable Adjustable steering damper for Land Rover Defender 90/110/130.The damper can be adjusted to 4 different degrees of hardness by means of a rotary control, thus varying the feedback of the steering, depending on the type of terrain and driving style.
Prices incl. VAT;
Tailgate Organiser for New Defender L663 from MY 2020, Rear Door
Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side. The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white
Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)
Prices incl. VAT;
Nakatanenga folding console for Land Rover Defender 90/110/130
Practical folding console for Land Rover Defender The vehicle seat in the Land Rover Defender can be easily folded backwards with this folding console, thus providing access to the battery and the electrical components located under the seat. All seats with 405 mm track spacing, e.g. Scheelmann, König, Recaro etc., can be fitted. The original running rails of the Defender are still used and retain their function without restriction. They are attached to the original points on the running rails using the mounting kit supplied. The folding console is also a seat rail extension by approx. 35 mm, a combination with our seat rail extensions is not advisable (although technically feasible). These seat consoles are made of ceramic-blasted stainless steel. The height of the console is 31 mm at the front and 61 mm at the rear.Suitable for: Land Rover Defender 90/110/130 Scope of delivery: 1 set for 1 seat
Prices incl. VAT;
DEFENDER VENT - finally mist-free front windows! Version 2.0
DEFENDER VENT - finally mist-free side windows for the Land Rover Defender! Replacement kit for all Defender up to MY07 with side demisters and optimized front demisters. Comes with detailed, illustrated instructions in three languages (also English, of course!) This is version 2.0
Prices incl. VAT;
Tailgate organizer with 5 MOLLE pockets, for all Land Rover Defenders with rear doors
Tailgate Organizer – Rear door organization system for the Land Rover Defender Where to put all the small items in your travel vehicle? First aid kit, multimeter, work gloves, winch controls, tire repair kit, etc. – everything needs to be stored neatly. The Tailgate Organizer makes use of the often unused space on the tailgate of the Defender. Several pockets with MOLLE (MOdular Lightweight Load-carrying Equipment) attachment system provide space for a wide range of accessories and keep them within easy reach. Advantages of MOLLE laser cut over sewn MOLLE: Significantly lighter due to less sewing material Quick attachment and removal of e.g. a first aid bag Flatter design prevents unnecessary snagging Secure hold without slipping Further information on the MOLLE system can be found in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organizer base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Fastening: To fasten the cover, it must be removed. Our dismantling tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce customised versions of our Tailgate Organiser. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Tailgate organiser with 5 MOLLE pockets, for Mercedes G with tailgate
Tailgate Organiser – Rear door organisation system for the Mercedes G Small items such as first aid kits, multimeters or gloves tend to disappear somewhere in the vehicle. With the Tailgate Organiser for the rear door of the G-Class, you can use the space efficiently. Several pockets with the MOLLE laser-cut system allow you to securely store tools, equipment or outdoor gear – always within reach when you need it. The advantages of MOLLE laser cut: lower weight due to reduced material quick change of bags (e.g. first aid) particularly flat – no annoying snagging stable hold without slipping Details on MOLLE can be found in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bags, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organiser base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Wheel spacers TREKFINDER for Ineos Grenadier 66mm per axle
TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels. The following vehicles are approved according to the TÜV parts certificate: Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*... The following wheel/tyre combinations are approved according to the TÜV parts certificate: 265/70R17 with 7.5x17255/70R18 with 8.0x18 Scope of delivery: Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained. Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel. Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met: - Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.
Prices incl. VAT;
Rear door panel for Land Rover Defender until MY02, black, without storage net
Rear door trim inside, for Defender 90/110 Rear door trim for Land Rover Defender 90/110.Suitable for the doors of models up to 2002. Easy to fit and available in various colours.
Prices incl. VAT;
Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, various colors
Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD
Prices incl. VAT;
Silicone hoses turbocharger and intercooler, for several Land Rover models
High-performance silicone hoses for turbochargers and intercoolers They are suitable for the Land Rover Defender with all diesel engine options as well as for selected models of the Land Rover Discovery 1/2/3 and Range Rover. The polyester-reinforced silicone hoses are tougher and thicker than the manufacturer's original hoses, making them more suitable for heavy-duty applications (such as towing, performance-enhanced vehicles and desert driving). The operating temperature ranges from -40° to +180° Celsius. The hoses are also designed for higher pressures - this is especially important for performance-enhanced engines. In addition, they do not delaminate or their surface does not peel off. The colour of the silicone hoses is black. For the Land Rover Defender TD4 2.2l there are 2 different versions. The correct version can be determined by the chassis number.Up to chassis number ...BA999999 the 4 part version is needed.From chassis number ...CA000000 the 3 part version is needed.
Prices incl. VAT;
Retrofit kit for Mercedes G Rockslider
Retrofit kit for Mercedes G Rockslider The original screw points of the running boards must be present for the G-Slide to be fitted smoothly. If these screw points are not present, this retrofit set is available. Set consists of: 6x counter plate (79x60x6 mm), 1x threaded rod (M3x10), 6x washer (6.4x25x1.25), 6x hexagon socket head (M6x20)
Prices incl. VAT;
Shock Mount for Land Rover Defender, rear axle, top
Shock absorber mount for Land Rover Defender, rear axle, top Lowering from 15-90 mm availablePlease select the desired lowering Delivery in pairs
Prices incl. VAT;
Nakatanenga Hi-Lift bracket for Land Rover Defender 110
HiLift jacking bracket for Defender 110 Station Wagon Whether off-road or in normal operation, a good ratchet jack like the Hi-Lift is unbeatable in many situations, not only for recovery, but as a mobile replacement winch, as a spreading tool and much more. The only disadvantage: Hi-Lift, JackAll and other identical jacks take up a lot of space with their non-dismountable length of usually 48"/122 cm and definitely do not fit under the driver's seat like the small OEM standard jacks. But fortunately there are also other seats in the Defender 110 Station Wagon. The cavity under the rear seat bench offers the perfect space for Hi-Lift, Hi-Lift X-treme, JackAll & Co with a length of 48"/122 cm. This means that the Jack can be reached quickly if necessary and doesn't get in the way in the slightest when you don't need it. Simply fold down the rear seat and you have easy access to the Hi-Lift. In addition, the interior of the van naturally also offers the best protection against rust and dirt. And to prevent the jack from slipping, hitting or rattling while riding, we have a genuine Nakatanenga solution: a high-quality stainless steel rail that is simply screwed onto the seat bench bearings and holds the jack firmly and rattle-free between two easy-grip knurled nuts and four rubber pads. Incidentally, we also include a yellow transport lock with every steel rail to ensure that the lever tube also fits securely and silently. Even though the bracket is designed to fit the Defender 110 rear bench perfectly, it can of course also be mounted on any other suitable surface, in the Defender, in other 4x4s, on the inside of the loading area or on the outside of the roof rack, for example. Supplied without Hi-Lift Also suitable for JackAll 122 cm and other identical derivative products.
Prices incl. VAT;
MSD Exhaust Pipe Discovery II SPECIAL
This MSD exhaust pipe for the Discovery II SPECIAL replaces the main Muffler This is motorsport equipment and not street legal! The advantages are a sonorous sound, a significantly lower pressure suction and thus a lower manifold temperature. The sound will grow to be more "full" - like a diesel should - but inside the cabin you will not feel a difference in volume. Of course, the exhaust does not meet the germen TÜV requirements and thus can only be used on private ground and outside the country. Most customers, buying this, speak of a more responsive performance, which we can confirm as well. The lower exhaust temperature does not only benefit the engine, but also decreases the temperature inside the footwell. -picture similar to product- Material: Stainless steel
Prices incl. VAT;
Differential Guard for P38 rear Axle, Land Rover Defender
Large differential guard with skid plate and hardware for the P38 rear axle of a Land Rover Defender 110/130 from the model year 2002 From the model year, 2010 on two holes need to be drilled. Not many parts on any 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.
Prices incl. VAT;
Nakatanenga door sills for Land Rover Defender
Stainless steel door sill panel The door sill prevents damage to the paint during boarding and disembarking and the door rubbers (with wire inlay) scrub there. In addition, it enhances the look. The door sill is made of stainless steel, stainless steel mounting material is included. The installation of the door sills is done on the existing holes of the floor panels. The door sill panel is available for Land Rover Defender 90/110/130 with two or four doors, so sets contain two or four of the strips. Please select the required variant below.
Prices incl. VAT;
Cross member, rear floor Defender 110 (Station Wagon, Crew Cab)
Cross member for Land Rover Defender In an ideal world, every part on the frame and underbody of a classic Landy would have come galvanized from the start. But of course, that didn’t happen at Land Rover, so corrosion in the substructure is one of the biggest enemies of classic Defenders, Discoveries and Range Rovers. Our hot-dip galvanized cross member is the perfect and durable replacement solution for corroded original parts. In 110 Defenders it sits under the second row of seats and not only secures the floor construction permanently, but also provides mounting points for sidebars, rock sliders, steps and many other attachments. Suitable for Defender 110 (MY until 2016) Station Wagon and Crew Cab as well as 130 Crew Cab (additional drill holes required). Please note: NOT suitable for a Defender 110 with 2nd row of seats from MY2007-2016
Prices incl. VAT;
Terrafirma BigBore Expedition Dampers
Terrafirma BigBore Expedition Dampers for Land Rover Defender 90/110/130, Disovery 1 and Range Rover Classic, sturdy damper with larger oil reservoir for travel and expedition use, either for front or rear exple, available in both standard and +50mm length. Price per single unit. Please choose axle and length.
Prices incl. VAT;