Wind deflector from ClimAir for G-Class Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of G-Class does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic G-Class windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for G-Class offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included. Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately.

Nakatanenga CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.

Ventilation plates for the side windows of the Mercedes-G The G-Class stands for uncompromising robustness and presence. Good air circulation as if the windows were slightly open, but without the increased risk of rainwater or theft? Plus reliable protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the G-Class from high-quality aluminum, make this possible — no comparison to rattling universal solutions. Supplied in pairs and powder-coated in black, they remain discreet and functional, ideal for off-road tours and camping.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation plates in place. Length: 685 mm Scope of delivery: 1 pair Item number LBLH-G: Suitable for the 460 / 461 / 463 series from 1979 to 2017 Item number LBLH-G2018: Suitable for all series from 2018 onwards   <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  

The high-quality sliders made of 3mm stainless steel fit all Mercedes G-models 461 and 463 and can be easily attached to the original stopping points of the running boards. The stable design offers optimal protection for your vehicle from the side and from below. The fitted shape fits perfectly to the silhouette of the vehicle and the high seat of the "G-Silde" also ensures an unchanged ramp angle. The distinctive design of Abeneuer4x4 also applies to this product "Made in Germany": the drawn knobs. These also offer a non-slip surface and ensure a secure stand. Dirt can be rinsed out through openings on the underside of the slider. Material:Stainless steel, black powder-coated Important NOTE:The original screwing points of the running boards must be available for smooth installation of the G-Slide. Scope of delivery:1 set of rock sliders (left & right) including holder and fastening material. As a useful add-on, there are matching anti-slip pads for the Rockslider.