Vehicle accessories
U-POL RAPTOR Coating- 4 bottle Kit
U-POL RAPTOR - The robust protective coating that also looks good! In contrast to other coatings, the RAPTOR multipurpose coating / painting does not need to be heated. It can simply be sprayed on and then hardens. For a mixture of 1 liter 50ml of paint are required - 1 liter covers an area of approx. 4.2m² - for processing we recommend the standard RAPTOR spray gun, the RAPTOR spray gun with adjustable spray nozzle for better texture adaptation or our roll-on -Set (application via paint roller). To prepare the substrate, we recommend the MIPA Etch primer, the MIPA 1K adhesion promoter, the U-POL universal primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please note the processing instructions stored under instructions / data sheet. What is RAPTOR protective coating / painting? The RAPTOR protective coating is a particularly robust coating made of polyurethane.This give surfaces an efficient and long-lasting protective layer, which is ideal for demanding conditions. The RAPTOR paintwork was developed in such a way that it can withstand almost any weather condition. The reliable UV resistance does not allow fading or fading - not even after many years in the sun. In addition, it offers the best protection against rust formation - thanks to the waterproof surface! Why the RAPTOR multipurpose coating? + PROTECTION:The coating offers excellent UV protection and, thanks to its ideal seal, protects against rust, corrosion, moisture and extreme temperatures. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES:You have the option of creating smooth or structured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a sheen. + COLOR CHOICE:The multi-purpose coating can be tinted according to the color of your choice or sprayed over with different colors. Scope of delivery: 4x 711 ml bottles coating946 ml hardener
Prices incl. VAT;
Rubber floor mats, rear, for Land Rover Defender 110, MY 1987 - 2016
Rubber floor mat rear, for Defender 110Rubber mat for the 2nd row of the Land Rover Defender 110 Station Wagon 5-door, fits models from 1987 to 2016. Protect the interior of your Land Rover Defender 110 Strong, durable and tailored for a perfect fit, these rubber floor mats will protect your Defender from dirty, muddy boots and shoes. Product Information: Material: RubberColour: BlackPlacement: 2nd rowWeight: 5.47 kgWidth: 480 mmHeight: 25 mmLength: 870 mmScope of delivery: 1 pair
Prices incl. VAT;
Stainless steel fixing set for Land Rover Defender 90 SW / 90 HT / 90 softtop
Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Stainless steel fixing set for Land Rover Defender 110 HT (2-doors)
Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Nakatanenga Rear Door Damper TOP Mounting
Reliable support for your vehicle door Rear Door Damper for Land Rover Defender 90/110, fitted to the TOP of the rear door. Conversion kit, comes with stainless fittings, only for vehicles with rear door, suitable for all model years. The rear TOP door damper replaces the standard door arrester with a special gas strut with soft-stop function that keeps the door secuerly opened. The damper also works when fitted alongside our rear crossmember spare wheel carrier.
Prices incl. VAT;
Switch Panel for New Defender from MY 2020 onwards
Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.
Prices incl. VAT;
Windscreen Bracket Kit for Land Rover Defender
Windscreen Bracket Kit for Land Rover Defender The original windscreen support brackets on the Defender are one of those details on the car that sooner or later cry out for cosmetic surgery. All kinds of corrosion – by exposure, metal contact, environmental or automotive chemicals – affect the parts and simply make them look shabby. The result is rust, peeling paint and streaking on the bodywork. Fortunately, replacing the brackets is one of the easiest jobs on the Landy. Our replacement brackets are available in two versions: black powder-coated or anodized aluminum. Both processes - anodizing and powder coating - ensure extremely resistant and durable sealing of the aluminum parts. During anodizing, electrolysis creates a porous surface structure, which is particularly suitable to absorb color pigments. In a last step, the anodizing is then compacted and thus sealed. However, black anodized aluminum tends to fade, which is why we have opted for powder coating for the deep black option. If you’re aiming for a look other than black or aluminum gray, you can of course paint it yourself or have it painted. You can also achieve your desired custom effect with our range of RAPTOR products. Or simply order the parts right here in the store with black powder coating from a professional for little extra cost. Suitable for all Land Rover Defenders 90/110/130. Supplied in pairs, gaskets and mounting materials are included.
Prices incl. VAT;
Nakatanenga Type Q Lamp Guards for Fog and Reverse light, Pair
Lamp protection grille for fog light, reversing light Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)
Prices incl. VAT;
Nakatanenga Spare Wheel Bag / Transport Bag - medium - Black
Nakatanenga spare tire backpack If you are occasionally "out at home", be it offroading, survival adventures or expeditions, you know the feeling when dust, dirt and moisture slowly but surely penetrate into the innermost areas: into the sleeping bag, in the spare linen, in the food, in the tool. There, where you just want to have it dry and clean, because otherwise it quickly starts to gnaw on morality. The rule of thumb is therefore, no matter whether backpack, tent or 4x4: dirty things stay together, well packed and especially OUTSIDE. Our Nakatanenga spare tire backpack with about 47 l volume realizes this principle for your 4x4. Firewood, muddy slings, wet clothes or tarpaulins, garbage, game loot and much more are stored outside on the spare tire, on the tailgate or on the roll bar. This ensures that the interior of the car and the rest of the equipment are guaranteed to remain clean. If the additional storage space is no longer needed, the spare tire backpack is quickly cleaned, folded and packed away. The 47 l backpack developed according to US MIL-SPEC is attached non-slip with two straps. It is freely expandable by double-sided MOLLE, e.g. with our first aid kit. Trivia is best kept in the zip pocket on top and meshes at the bottom allow water and dirt to drain off quickly. The bag is made of sturdy polyamide 6.6 and is internally PU-coated, odorless and without plasticizer.The Medium spare wheel rucksack with a packing volume of approx. 47 l is ideal for tyres up to 37". If that's not enough, you can take a look at its big brother with 80 litres here. Delivery is without the illustrated accessories. Material: Polyamide 6.6 with PU coatingCapacity: about 47 litersDimensions: HxWxD appx. 525x425x210 mm
Prices incl. VAT;
Installation box for AUTOTERM (=Planar) 2D parking heaters
Installation box for AUTOTERM (=Planar) 2D parking heaters Our installation housing for the AUTOTERM (=Planar ) 2D parking heater can be mounted on the outside of loading areas or vans. Thanks to the sturdy material, you no longer need to worry about the parking heater being damaged by the load, for example. With this installation box, you save space in the vehicle and in the engine compartment and protect the parking heater at the same time! The installation box is also suitable for Webasto Air Top 2000 and Eberspächer D2 parking heaters. Dimensions: 35x15x13 cm Scope of delivery: 2-piece installation box 4 screws, 4 washers Pre-assembled cable grommet
Prices incl. VAT;
TREKFINDER mudguard extension-set universal, 35mm wide, 150cm long
ender flares TREKFINDER universal - 1 PIECE - 35 millimeters wide and 150 cm long - incl. TÜV® report inexpensive and flexible fender flares in very good quality indestructible and therefore durable fender flares made of black rubber ideal e.g. for track widening with wheels, spacers etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widening is 51 millimeters wide in total - of which approx. 16 millimeters are used for mounting and approx. 35 millimeters then protrude outwards to cover the tires SCOPE OF DELIVERY: 1 TREKFINDER mudguard extension 150 cm, including screws 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for 24 hours afterwards must be at least 20° Celsius the widener must be pressed evenly against the mounting surface with high pressure for approx. 1 minute after removing the 3M tape carrier film adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be followed, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended (fixing screws are included in the scope of delivery) The extensions are suitable for almost all vehicle types and vehicle models of all vehicle manufacturers, such as:Ineos Grenadier, Jeep, Land Rover, Ford, Nissan, Suzuki, Toyota and many others (cars, vans, off-roaders, construction machines, trailers, agricultural machinery, etc.).
Prices incl. VAT;
Cargon net, nylon - 150x100 cm with tension buckles
Practical nylon cargo net Can be fastened almost anywhere with tensioning buckles, size approx.: 150 x 100 cm. Made exclusively for us in Germany. Material thickness: 3mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black. 14 lashing points, 150 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Illustration similar Optional: set of 10 belt staples for mounting the net. The net is also available in other sizes on request.
Prices incl. VAT;
MUD Console for Defender TDI
Universal console for Defender For radio, radio set, additional instruments etc., piece - delivery without instruments or switches.
Prices incl. VAT;
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
The Suzuki Jimny II is small, agile, and a true off-road cult classic. Want good air circulation like with slightly open windows, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made specifically for the Jimny II from sturdy aluminum, offer just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping trips and adventure excursions with small luggage. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Ventilation panels on the driver and passenger sides must not be used while driving! Material: Aluminum Suitable for: Suzuki Jimny II (GJ & HJ) <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Bundle: U-POL RAPTOR Multipurpose Coating - 4 Bottle Kit - with Spray Gun
Special offer bundle RAPTOR 4-Bottle Kit black or colourable -10% discount on the bottle kit including free spray gun Unlike other coatings, the RAPTOR multi-purpose coating/paint does not need to be heated. It can simply be sprayed on and then cures. A mixture of 1 litre requires 50 ml of paint - 1 litre covers an area of approx. 4.2 m² - for application we recommend the standard RAPTOR spray gun (included in this bundle), the RAPTOR spray gun with adjustable spray nozzle for better texture adjustment or our roll-on set (application via paint roller). To prepare the substrate, we recommend We recommend the U-POL universal adhesion primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please observe the processing instructions in the instructions/data sheet. What is RAPTOR protective coating / varnish? The RAPTOR protective coating is a particularly robust polyurethane coating. This gives surfaces an efficient and durable protective coating that is ideal for demanding conditions. The RAPTOR coating has been developed to withstand almost any weather conditions. The reliable UV resistance prevents fading or bleaching - even after many years in the sun. It also offers the best protection against rust formation - thanks to the water-resistant surface! Why choose the RAPTOR multi-purpose coating? + PROTECTION: The coating offers perfect UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to an ideal seal. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer. + CHOICE OF COLOURS: The multi-purpose coating can be tinted to the colour of your choice or over-sprayed with different colours. Scope of delivery: 4x 711 ml bottles of coating (selectable colour: black or clear-tintable) 946 ml hardener Standard RAPTOR spray gun ONLY WHILE STOCKS LAST!
Prices incl. VAT;
CargoBear wind deflector for Mercedes G roof rack CargoBear
Wind Deflector for Nakatanenga CargoBear 1.0 & 2.0 – Mercedes G-Class Enhance the aerodynamics and functionality of your CargoBear roof rack with this wind deflector, designed specifically for the Mercedes G-Class and compatible with both CargoBear 1.0 and 2.0 systems. Made from black, matte powder-coated aluminium, the deflector extends the rack by 10 cm at the front and improves airflow over the already low-profile system. Pre-drilled holes allow for easy and secure mounting of Osram SX180 lightbars, giving you more versatility for off-road or overland use. Material: Aluminium, black matte powder-coatedIncludes: Mounting hardwareExtension: Adds 10 cm to the front of the CargoBear rack A smart upgrade for both performance and lighting integration.
Prices incl. VAT;
CargoBear wind deflector for Defender-CargoBear roof racks
Wind deflector suitable for Nakatanenga CargoBear 2.0 Land Rover Defender Material: aluminium, black matt powder-coated Incl. Mounting material Suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.
Prices incl. VAT;
Armrest for Land Rover Defender 90/110/130
Leather armrest for Land Rover Defender Our armrest for the doors of your Land Rover Defender 90/110/130 is just that bit of extra that adds a whole new level of comfort - even on long journeys. Finally you can rest your elbow comfortably, making driving so much more relaxing and safe. Our armrest is made of an intricate aluminium subframe which is covered by hand in naturally tanned leather (black). The rest is available either for left or right hand side doors or, with a saving, as a bundle for both doors. No drilling required. Please choose.
Prices incl. VAT;
CargoBear Wind Deflector for Defender-CargoBear - SLIDE
Wind deflector - suitable for Nakatanenga CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element Material: Aluminium, black matt powder-coated RAL 9005 incl. fixing material the wind deflector extends the CargoBear by 10 cm. lightbars or headlights can be mounted on the wind deflector. suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.
Prices incl. VAT;
Roof rack railing and spoiler
Roof Accessories for NAVIS PickUp: Spoiler and Rail in Black Roof rack NAVIS spoiler RAIL & FLAT PickUp roof rail Alu black:The spoiler reduces the wind noise and is suitable for all NAVIS roof racks. Roof rack railing for NAVIS FLAT PickUp roof rail aluminum black:The matching side rail for the roof rack NAVIS FLAT - suitable for all PickUp models.2 pieces (1x left and 1x right)Color: Black
Prices incl. VAT;
Mudguard extensions TREKFINDER universal: 4 pieces, 23 mm wide, each 150 cm long, incl. TÜV®.
Universal mudguard extensions from Trekfinder - incl. TÜV® report inexpensive and flexible mudguard extensions in very good quality indestructible and therefore durable mudguard extensions made of black rubber ideal e.g. for track widening with wheels, spacer discs etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widener is 39 millimetres wide in total - of which approx. 16 millimetres are used for mounting and approx. 23 millimetres then protrude outwards to cover the tyres SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, each 150 cm long, 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended
Prices incl. VAT;
VIAIR EVC 88P Mobile compressor
EVC88P Every Vehicle Carry™ Digital Portable Compressor with pressure preset and 7-way plug connection The best-selling 88P, just got even better! Introducing the Every Vehicle Carry™ 88P digital compressor. With the digital pressure gauge and pre-set pressure with auto shut-off, inflating tyres is easier and more precise than ever before. Every rider can experience VIAIR's legendary, long-lasting performance and reliability. The compressor is easy to use and therefore suitable for both new and experienced users. FEATURES: 12-volt Permanent magnet motor Duty cycle: 25 min. @ 2 bar Max. Working pressure: 8 bar Max. Current consumption: 20 amps Protection class: IP53 Max. Ambient temperature: +70°C Min. ambient temperature: -20°C Dimensions: 24.9cm L x 8.1cm W x 14.2cm H Net weight: 2.2kg. Length of mains cable: 3m. Air hose length: 4.8m. Can inflate tyres up to 33 inches and is ideal for various vehicles, including trucks, SUVs and off-road vehicles. PLEASE NOTE:The 88P will not work with Presta bicycle valves unless used with a Presta valve adapter. Scope of delivery: Easy-to-read digital manometer Preset function and automatic switch-off LED work light Solid brass tyre chuck for unscrewing Two battery clamps with 25A fuse (P/N EVC88P) or 7-way plug (P/N EVC88P7) 3 inflation tips and one Presta valve adapter Deluxe carry bag
Prices incl. VAT;
Ejector tool for Mercedes-Benz G-Class catch bolt
Changing door hinges - simple - quick - stress-free with the ejector tool for catch bolts With our specially developed ejector tool, the catch bolts of the Mercedes-Benz G-Class can be removed effortlessly - without any unnecessary effort.Problems often occur when replacing the door hinges: The original bolts are often worn out, bent or difficult to access. This is exactly where our tool comes in. It enables the bolts to be removed quickly and easily - precisely, efficiently and without damage.This makes replacing the hinges child's play.All hinges for the Mercedes Benz G-Class are available from us: Door hinges (for 2- or 4-door) Door hinges for rear door (1- or 2-leaf) Hinges for bonnet Window flap hinges
Prices incl. VAT;
Mounting bracket Webasto Thermotop EVO5
Webasto Thermotop EVO5 mounting bracket Stainless steel bracket for mounting the Webasto Thermotop EVO5 water heater or AUTOTERM flow in the Land Rover Defender TD4 2.2 or 2.4. Existing mounting points are used to attach the parking heater, the required stainless steel mounting material is included with the parking heater bracket. Stainless steel and rust information sheet Important note: the mounting bracket only fits if the air intake in the engine compartment has been adapted (e.g. with our optimised air intake or our SN4 snorkel systems)
Prices incl. VAT;
Nakatanenga Heating Sleeve Fuel Filter with Wiring Harness, Time Relay and Push-button
Complete solution for clean diesel flow Powerful 100 W heating sleeve for fuel filters with a diameter between 73-95 mm. The sleeve has got crimped connectors and a wiring harness (incl. time relay and push-button). It prevents the gelling of fuel in colder temperatures and can be fitted to any vehicle with 12 V. Compared to customary sleeves this silicone heating sleeve is very flexible and can be fitted to many diesel filters. The sleeve guarantees ideal heating as it sits closely to the filter. Comes with powerful velcro strips for fitting. The waterproof wiring harness is fitted with a time relay with a push-button. The sleeve is switched on by push-button, it then heats for six minutes until it switches off automatically or for another six minutes if you press the button again. In cold climates your diesel fuel is prone to gelling as paraffin crystals form which turn the fuel flaky. As a result fuel flow through the filter stops and your engine loses power until it finally cuts out. Once the filter is blocked, it can only be freed by inducing heat. By emitting this heat and transferring it to the filter, our heating sleeve prevents the clogging of the filter element. The paraffin crystals are immediately dissolved by the induction of heat and the fuel can easily pass the filter again. You can purchase just the sleeve, without plugs, harness, relay and push-button here in our shop. Technical details:Maximal heat resistance of insulation: 300 °CMaximal operating temperature: 250 °CVoltage: 12 V, AC or DCOutput: 100 W Comes with:- silicone heating sleeve- wiring harness with time relay and push-button- 2 strong velcro straps
Prices incl. VAT;
AUTOTERM Control board 5563, for AUTOTERM 2D-12
Control unit for the Planar 2D This board can be used as a spare part or to convert heaters without height kit. For vehicles with 12V on-board voltageSuitable for heaters from serial number: 5561 ..... Please note :If you carry out the conversion yourself, the warranty and the warranty expire. We advise against an independent conversion!The return of an electronic component is not possible. Have it carried out in a certified specialist company. If you have any questions please contact us via email or phone. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment
Prices incl. VAT;
ClipsKit-Big - Box with clips, plastic rivets, Counter bushes 280 pcs.
Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer
Prices incl. VAT;
Cargo Net Mesh for Land Rover Defender until BJ 2016
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
VIAIR Onboard Air Hookup Kit, 5,8 bar on / 7,2 bar off
Mounting kit for compressed air system Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/4” (F) NPT Tee Fitting (1) 1/4” to 1/8” NPT Reducer (1) 1/4” Quick Connect Coupler (1) 1/4” (F) NPT Quick Connect Stud (1) 1/4” (M) NPT Compression Fitting* (1) 1/4” (M) NPT Compression Tee Fitting* (3) Insulated (F) Terminal Connectors (2) Insulated (M) Terminal Connectors (2) Quick Splice Connectors (3) Ring Terminals (6) Cable Ties (3) Cable Tie Brackets (3) Air Line Clips (1) Continuous Grommet (2) Mounting Screws, Washers, Nuts (1) Instruction Manual * All compression fittings are for 1/8” O.D. air line.
Prices incl. VAT;
Recovery Shackle (rotating) for Land Rover Defender
Swivel stainless steel recovery point with stainless steel shackle for the highest demands. Designed for the OEM front bumper on the Land Rover Defender 90/110/130. This recovery point is an indispensable accessory for serious off-road enthusiasts and professional users who rely on maximum reliability and safety during recovery operations. Developed for demanding use, this swivel recovery point offers superior performance and durability. Robust Construction for Maximum Safety Made from high-quality stainless steel, the recovery point is characterized by its extreme robustness. The mounting adapter, the shackle, even the retaining ring are made of stainless steel. Rust is therefore a thing of the past here. The main structure is solidly bolted and designed for high loads. This massive construction ensures that the recovery point can withstand even the harshest conditions and high tensile forces. The careful workmanship and material selection guarantee a long service life, even with regular and intensive off-road use. Optimal Flexibility thanks to 360° Swivel Function A special feature of this recovery point is its 360° rotatable stainless steel shackle pin. This feature allows for the flexible attachment of recovery shackles or ropes from various angles without causing adverse lateral loads on the recovery point or vehicle structure. This is particularly advantageous in rough terrain, where the vehicle to be recovered is often not ideally positioned. The swivel function minimizes the risk of material fatigue and increases safety during the recovery process by ensuring optimal force transmission. Thoughtful Design - Additional Feature This swivel recovery point is not only functional but also thoughtfully designed. The edges of the recovery point are rounded, which ensures optimized pedestrian protection and minimizes the risk of injury. Rely on the swivel recovery point from Nakatanenga – your strong partner when it matters most.
Prices incl. VAT;
VIAIR 89P-RVS - the compressor especially for campers and motorhomes
VIAIR 89P-RVS - the compressor especially for campers and motorhomes Technical data:- Suitable for tyre sizes max. 245/70R19.5- Delivery volume: at 0 bar 41.7 L/min, at 3 bar 31.5 L/min, at 5 bar 23.6 L/min and at 7 bar 14.9 litres per minute- Max. working pressure: 120 PSI/8.2 bar- max. voltage: 13.8 volts- max. current consumption: 20 amps- max. ambient temperature for operating the compressor: 70° Celsius- min. ambient temperature for compressor operation: -20° Celsius- max. possible operating time: 25 minutes at 30 PSI- with on/off switch- dimensions (L x W x H): 25cm x 8,1cm x 14,2cm- weight: 2,15 Kg- Protection class: IP53Features:- Stainless steel valves guarantee long-lasting and optimal shutter speeds- generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life- Anodised cylinder surfaces increase protection against abrasion- the piston motor with PTFE piston rings ensures low-friction and optimised smooth running and a long service life- the motors are protected against splash water and thus maximally resistant to corrosion- Integrated, automatic overheating protection for a long compressor service life- CE markingScope of delivery:- 6 metre air hose- 3 metre battery cable with battery terminals- Tyre inflator (solid brass)- Pressure gauge on compressor- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- three additional valve adapters- a high-quality carrying bag Example filling times for the VIAIR compressor kit model 89P-RVS:50 to 60 PSI / 3.4 to 4.1 bar 1 min. 11 sec. (±05 sec.)60 to 80 PSI / 4.1 to 5.5 bar 3 min. 28 sec. (±10 sec.)80 to 90 PSI /5.5 to 6.2 bar 1 minute. 40 sec. (±05 sec.)The model designation "RVS" stands for "RV-Safe", as these compressors have been specially developed and tested for the motorhome market.A mobile and above all portable compressor should never be missing on board a camper or motorhome. The VIAIR 89P-RVS is such a mobile and lightweight 12-volt compressor, specially designed for Class B motorhomes. This compressor inflates most Class B (CP) tyres from 5.5 bar to 6.2 bar (80 to 90 PSI - follow manufacturer's instructions!) in less than 2 minutes. The 89P-RVS has a new and improved longer air hose to reach the tyres comfortably.The tyres are the connecting element between the vehicle and the road. Enormous forces are transmitted over a relatively small area. To be able to guarantee this in the best possible way, regular checking of the tyre pressure is essential, especially for motorhomes. Don't forget to check the spare wheel as well. However, this can be quite inconvenient for many campers, as the spare wheel must first be removed from underneath the floor - something that people tend to do without at the petrol station.For an RV compressor, power is of course crucial. Here, the 89P-RVS offers a maximum working pressure of more than 8 bar - quite sufficient for all compressed air applications you are confronted with as a camper. Please note: The 89P-RVS is not compatible with Presta bicycle valves!Due to the high currents that flow when operating the compressor, it must only be connected directly to the battery via the supplied clamps. However, with the 6m hose, which is also included in the delivery, you can also reach the rear wheels comfortably.As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Please note: We have adapted our Viair range. You will still find all standard products. One of the reasons we have decided to reduce the range is to guarantee better availability.
Prices incl. VAT;
Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender
Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Off-Road Accessories at Nakatanenga: Your Vehicle, Your Rules – Perfect it for Every Adventure!
Your 4x4 is more than just a means of transport – it's your partner for freedom, discovery, and unforgettable moments off the beaten path. To ensure you can enjoy every tour optimally prepared and with maximum performance, safety, and comfort, our comprehensive main category "Accessories" offers you a carefully selected variety of products that will take your vehicle to the next level.
Discover Exactly What You Need – Our Accessory Categories in Detail:
We've structured our accessories clearly for you, so you can quickly and easily find the right components for your vehicle and your individual requirements:
- Attachments: Add more functionality and an individual look to your vehicle. Here you'll find everything from robust trailer hitches (like NATO hitches) and tow bars to snorkels for safe water crossings, as well as specific mounts and attachments that perfectly fit your vehicle model and expand its capabilities.
- Recovery: Be prepared for emergencies and help yourself and others out of tricky situations. Our selection includes powerful winches (electric or manual), high-quality winch accessories, extremely durable recovery straps, kinetic ropes, tree trunk protectors, shackles, snatch blocks, and indispensable sand tracks, recovery boards, or waffle boards.
- Auxiliary Heating: Enjoy comfort and warmth, no matter where you are or what the weather is like. With a reliable auxiliary heater, you ensure pleasant temperatures inside your vehicle or roof tent, even in frost and cold. Perfect for winter camping or chilly nights in the mountains.
- Roof Racks: Expand your storage space and safely transport what you need for your adventure. Discover modular roof rack systems, platforms, crossbars, and a variety of specific accessories for attaching roof tents, transport boxes, jerry cans, sports equipment, and much more.
- Compressed Air: More than just hot air! With powerful compressors (fixed or portable), you can not only bring your tires back to road pressure after an off-road drive but also operate air tools or clean your equipment. Accessories like tire pressure gauges and air hoses complete the range.
- Interior Equipment: Design the interior of your vehicle to be functional, comfortable, and tailored to your needs. This includes seat covers for added protection and comfort, practical center consoles, organizer systems, drawer systems, and other accessories that make long journeys more pleasant and ensure order.
- Organization and Load Securing: Keep your equipment secure and within reach! Discover robust alu boxes, impact-resistant transport boxes, flexible lashing tracks and airline systems with matching fittings, modular MOLLE bags and panels, as well as the brilliantly simple Quick Fist mounts for tools and equipment.
- Protection: Shield your vehicle from the rigors of off-road terrain. Sturdy skid plates for the engine, gearbox, and tank, resilient rock sliders and side steps, robust bumpers (front and rear), differential guards, and fender flares protect your vehicle from damage.
- Tools: Be prepared for repairs and maintenance work on the go. Here you'll find selected hand tools, specialty tools for off-road vehicles, tire repair kits, multi-tools, and everything you need to fix minor problems yourself.
Nakatanenga – Your First Stop for High-Quality Off-Road Accessories:
- From Practice, For Practice: We test many of our products ourselves under the toughest conditions. You only get what has proven itself.
- Expertise and Advice: Our team consists of passionate off-road drivers. We advise you individually and work together to find the best solution for your requirements.
- Quality You Can Rely On: We rely on renowned brands and develop our own products that meet the highest standards.
- Comprehensive Range: From the smallest screw to complete expedition equipment – you'll find it here.
Equip yourself now at Nakatanenga with the best accessories and get your vehicle ready for unforgettable off-road experiences. Your adventure begins with the right gear!