Das könnte Sie auch interessieren
Always with a leash There are basically two ways of managing our hectic day-to-day lives: one is to always think of everything before you go out or when plans change: keys, phone, wallet and all the other stuff. The other far better solution is to have backups handy, in case you do forget – as you will. Our “Always-on-you” dog lead belongs in the second category. It is so small, light (and affordable), that it’s probably best to own several of them and always have one handy wherever they’re needed, in your car, handbag or coat pocket. That way, you always have a leash with you when you’re out and about with your dog. The lead is 1.6 m long and is made from extremely strong polyamide fabric (max. pull force 315 kg). It is 100% Made in Germany, and as always with products from our own textile workshop, we take care that the highest quality workmanship is applied in manufacturing – in this case, the leash is even made to military spec TL8470-0071. The aluminum karabiner, with its firm snap gate and the 360°- swivel is firmly sewn into the strap. Leash and karabiner hook combined are smaller than a packet of tissues and not much heavier. Always handy, “always-on-you”. Weight: 0.039 kg
Prices incl. VAT;
Driving off the Road. Wie du richtig im Gelände fährst - Die Geländefahrschule für Offroader: Grundlagen, Fahrtechniken und Tipps Mit dem Besitz eines Geländefahrzeugs geht für immer mehr 4x4-Fans ein Traum in Erfüllung. Um gut und sicher durchzukommen, ist es jedoch wichtig, sich mit dem eigenen Fahrzeug vertraut zu machen, Abmessungen, Lenkverhalten und Antriebstechnik zu kennen und ein Gespür für sein Fahrverhalten zu entwickeln. Denn jeder Geländetyp erfordert besondere Fahrtechniken: Vom Fahren durch Wasser, Schlamm, Schnee, über Baumstämme bis hin zu Kies, Geröll und steilem Gelände zeigt dieses Buch durchgehend bebilderte Anleitungen. Mit Tipps zur Pannenvermeidung und sicheren Fahrzeugbergung. ISBN: 978-3-613-50923-8Titel-Nr.: 50923Einband: broschiertSeitenzahl: 208Abbildungen: 400 BilderFormat: 170mm x 240mm
Prices incl. VAT;
Ähnliche Artikel
Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!
Prices incl. VAT;
Fender extensions universal This broadening in discreet optics is suitable for vehicles with and without inner edge in the wheel arch. Ideal for widening spacers, wider tires, rims with greater press-in depth, etc. Available in different widths: 18 mm, 23 mm, 28 mm - please select the desired widthLength: 150 cm Suitable for: car, SUV, VAN, trailer, camper, construction machine, agricultural machine, etc. Attention - installation instructions: The adhesive tape that we use for this profile is the best that we have: Article 3M 4222If the extension fender will be applied on a normal situation, we don not need to use Primer.The important is to follow the correct fitting instruction: 1) Perfect cleaning of the surface that will receive the adhesive tape2) Position the profile and apply using a strong pressure for all the length of the adhesive tape3) Correct temperature for the application: minimum + 20°C4) To be sure that the adhesive tape is working correctly, you can apply a masking tape, to keep the pressure for the next 24 hours5) Do not wash the car for 48 hours after the application
Content: 1.5 running meters (€23.30 / 1 running meters)
Prices incl. VAT;
Mudguard widening universal - 2 Pcs - 60 millimetres wide and a 150 centimetres long. An inexpensive, flexible and beautiful solution. The wing extension is made of robust hard rubber. The specified width of 60 mm is measured when mounted from the outer edge of the body. This means that the wing extension is 90 mm wide in total, 30 mm of which are available for mounting on the wheel arch, the remaining 60 mm are for covering the tyre. The fender extension is mounted from "below", i.e. for mounting on the vehicle there should be a minimum of 1 cm wide web edge (= wheel arch edge parallel to the tread of the tyre) in the wheel arch. The widening is screwed from below to the web edge with the fastening screws included in the scope of delivery. Scope of delivery: 2 pcs. wing extensions a 150 cm longFixing screws
Content: 3 running meters (€33.00 / 1 running meters)
Prices incl. VAT;
Universal mudguard extensions from Trekfinder - incl. TÜV® report inexpensive and flexible mudguard extensions in very good quality indestructible and therefore durable mudguard extensions made of black rubber ideal e.g. for track widening with wheels, spacer discs etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widener is 39 millimetres wide in total - of which approx. 16 millimetres are used for mounting and approx. 23 millimetres then protrude outwards to cover the tyres SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, each 150 cm long, 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended
Prices incl. VAT;
TREKFINDER mudguard extension-set universal, 35mm wide, 150cm long
€135.95
Prices incl. VAT; / Parcel shipping
Delivery time 5-10 working days
ender flares TREKFINDER universal - 1 PIECE - 35 millimeters wide and 150 cm long - incl. TÜV® report
- inexpensive and flexible fender flares in very good quality
- indestructible and therefore durable fender flares made of black rubber
- ideal e.g. for track widening with wheels, spacers etc. - for prescribed registrations or off-road use
- the fender flares are glued in the wheel arch under the web edge of the bodywork
- the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge
- for difficult off-road applications, additional fixing of the widening with screws is recommended
- the widening is 51 millimeters wide in total - of which approx. 16 millimeters are used for mounting and approx. 35 millimeters then protrude outwards to cover the tires
SCOPE OF DELIVERY:
- 1 TREKFINDER mudguard extension 150 cm, including screws
- 1 TÜV® test report
- 1 type plate
- 1 piece fitting instructions
- 1 photo sheet
ATTENTION - important installation instructions:
- the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease
- the outside temperature and the temperature of the components or mounting surface at the time of installation and for 24 hours afterwards must be at least 20° Celsius
- the widener must be pressed evenly against the mounting surface with high pressure for approx. 1 minute after removing the 3M tape carrier film
- adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle
- please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours
- the final strength of the bonding is only achieved after 48 hours
- Please do not wash the vehicle for at least 48 hours
- in some installation situations, especially if the installation instructions cannot be followed, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended (fixing screws are included in the scope of delivery)
The extensions are suitable for almost all vehicle types and vehicle models of all vehicle manufacturers, such as:Ineos Grenadier, Jeep, Land Rover, Ford, Nissan, Suzuki, Toyota and many others (cars, vans, off-roaders, construction machines, trailers, agricultural machinery, etc.).