Vehicle accessories

Differential protection for Land Rover Discovery 1 for front and rear differential  Few components on an off-roader are as exposed as the differentials of the front and rear axles. It doesn't take long for costly damage to occur when hitting a stone, which usually cannot be repaired on site and therefore means the end of the journey. What is annoying in the off-road park at home can quickly become dangerous in more remote regions of the world. We have therefore designed appropriate protective devices for the various axles of the Land Rover Defender, which protect the differential covers from damage and in some cases also allow easier sliding over the obstacle.

Perfect fit & extremely hard-wearing Rubber floor mats for Land Rover Defender TD5 (front)  These rubber floor mats for the front footwell of your Land Rover Defender TD5 offer optimum protection against dirt, moisture and wear and tear - whether in everyday life, off-road or on long tours. Made from robust, durable material, they are precisely tailored to the contours of the TD5 and can withstand even the toughest conditions. For Land Rover Defender Td5, all models Scope of delivery: 2 piecesReplacement for LR original part number: STC50172

Strong - Safe - Versatile: Dixon-Bate towing jaw with ball head Combined Dixon-Bate coupling for 50 mm ball head and towing jaw with 25 mm pin coupling, up to 3.5 tons, similar to Land Rover RTC8159 With E-mark (E11), drawbar load up to 250 kg, D-value 17 kN, 90 mm hole spacing, incl. securing pin Supplied without fastening material, please observe the manufacturer's instructions for installation!

Tailgate Organiser – Tailgate organisation system for the Jeep Wrangler JK Whether you're going on an off-road tour or a camping trip, small items such as tyre repair kits, gloves or winch controls can be stored neatly in the Tailgate Organiser at the rear of the Wrangler. The MOLLE laser-cut system allows for flexible attachment options and ensures that everything stays in place – ready to hand at all times. The advantages of MOLLE Laser Cut: Lighter than sewn systems Quick attachment and removal of bags Particularly flat – no unwanted snagging Firm hold, no slipping You can find more information about MOLLE in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bags, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organiser base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.  

Tailgate Organiser – Tailgate organisation system for Suzuki Jimny 1+2 For anyone who drives a Suzuki Jeep: the Tailgate Organiser transforms the tailgate into a practical storage space for small items such as first aid kits, tools or outdoor gadgets. Thanks to the MOLLE laser-cut system, various bags can be attached flexibly – for tidiness and quick access. The advantages of MOLLE Laser Cut: Reduced weight thanks to less material Easy attachment and removal of bags Flat design, no snagging Firm and secure hold Further information on the MOLLE system can be found in the downloads. Scope of delivery: Suzuki Jimny up to model year 2018 FJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny 2 GJ/HJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Important note: On Suzuki Jimny models built from 2021 onwards (type GJ/HJ), the emergency release for the tailgate can no longer be used once the organiser has been fitted. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products.   Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.

Ventilation plates for rear side windows - Škoda Octavia III station wagon (2013-2020) The Škoda Octavia III estate car is a reliable companion for travelling and outdoor use. With the precisely manufactured ventilation panels for the rear side windows, you can noticeably improve the ventilation in your vehicle without compromising on safety or weather resistance.   Installation is straightforward: wind down the window, insert the ventilation panel, close the window again — and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 610 mm

Nakatanenga Ventilation Panels Side Windows - Ford Ranger (from 2012 and from model year 2022)  The Ford Ranger is a robust pickup truck that impresses both off-road and in everyday use. With the right ventilation panels, the interior remains well ventilated even at high temperatures, while rainwater, insects, and uninvited guests stay outside. The aluminum, black powder-coated panels are inconspicuous, sturdy, and offer additional comfort for breaks on the road or when working with the vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 660 mm 

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Ventilation panels side windows for Toyota LandCruiser J150 / J120 The J120 combines comfort with off-road capabilities for families and expeditions. The J150 is the modern flagship among Land Cruisers with high reliability. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the J120 from high-quality aluminium — no rattling universal parts — offer just that. Supplied in pairs and powder-coated in black, they are ideal for long tours and periods of standing in the sun. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again — and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 610 mm    

Ventilation plates rear side window for Mercedes ML 270CDI W163 / W164 The ML 270 (W163) was one of the early Mercedes SUVs and offers solid everyday practicality. Good air circulation as if the windows were slightly open, but without any major risk of rain or theft? Plus protection from insects? Our custom-fit ventilation panels with mosquito nets, made for the W163 from robust aluminum—no rattling universal parts—achieve just that. Sold in pairs and powder-coated in black, they improve comfort when stopping and camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm     

Nakatanenga ventilation panels side windows - Land Rover Discovery 1/2/3/4 The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm

The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm  

Nakatanenga ventilation panels side windows - Nissan Patrol GR Y60 long wheelbase (BJ1988-1998)  The Nissan Patrol Y60 is a robust, classic off-road vehicle with a long tradition. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, suitable for the long Y60 and made of durable aluminum—no rattling universal parts—make this possible. Supplied in pairs and powder-coated in black, they are ideal for expeditions and strenuous use. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 610 mm  

Nakatanenga ventilation plates front side windows  for Ford Transit Custom Whether for trade, commercial, or recreational use, the Ford Transit Custom is extremely versatile. To prevent heat build-up in the cockpit, the ventilation panels allow for continuous air circulation when the vehicle is closed. They are made of robust, black powder-coated aluminum, blend in visually and provide reliable protection against rain and insects – practical for work and travel. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation plates installed. Length: 470 mm Width: 150 mm Material: Aluminum, black powder-coated Note: Ventilation plates on the driver's and passenger's side must not be used while driving!  

Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Nakatanenga step for rear ladder - aluminium Suitable for Land Rover 90/110, material: aluminium, anodised, powder coated, delivery includes mounting material.The weight-optimised, but still stable step is mounted on the rear crossbar of the Land Rover Defender and allows easy access to a ladder to the roof rack. In contrast to a long ladder, this solution does not cover the number plate.The mounting is very easy, the necessary mounting material is included. The step is available in aluminium with black powder coating.

Nakatanenga window vent for lateral rear window of the Toyota Land Cruiser 76 and 79 Series The 76 Series is purist, robust and built for tough use. The 79 Series is a workhorse and at home in extreme conditions. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable insect protection? That's what our ventilation panels with mosquito nets offer, specially manufactured for the 76/79 Series from solid aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for emergency vehicles and expeditions. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm Note: These ventilation plates were originally developed for the Jeep Wrangler. However, some of our customers use these ventilation plates for the Land Cruiser mentioned above. Due to the shape, there may be a small gap of 5-7 mm on the left or right between the plate and the window frame on the Land Cruiser. NOTE: Only suitable for 4-door models!

Nakatanenga ventilation panels, rear side window The precisely fitting ventilation panels are ideal for high-roof combi vans such as the Citroën Berlingo, Peugeot Rifter, Opel Combo and Toyota Proace City Verso. These vehicles in particular are often used as family cars, campers or transport vehicles for dogs – and benefit greatly from good air circulation in the interior. The robust, aluminium-made and black powder-coated panels can be inserted into the lowered side windows in just a few simple steps. They reliably provide fresh air without allowing rain or insects to enter the vehicle, while also reducing the risk of unauthorised access. This keeps the interior pleasant even on warm days, whether you are on the move or stationary. Installation is straightforward: lower the window, insert the panel and raise the window again – done. ⚠️ Important note: Even with ventilation panels in place, children and animals must not be left unattended in the vehicle. Suitable for: Citroën Berlingo K9 (2018 and later), Peugeot Rifter, including L2 seven-seater, Opel Combo and Toyota Proace City Verso (all from model year 2018 onwards) Note: only suitable for vehicles with optional equipment package (sliding doors in row 2 with lowerable side windows) Material: aluminium, black powder-coated Dimensions: 571 x 147 mm          

Fresh Air for Your Defender 110/130 – Secure and Insect-Free! Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 505 mm.

Nakatanenga Overhead Storage System Defender Where to put important small items when the storage space in the vehicle cockpit is tight? It's simple! Into the pockets of our Overhead Storage System. Even items that are only needed in an emergency are then within easy reach.In addition to a space-saving bag, the innovative Overhead Storage System contains a base plate that is attached between the sun visor and the car roof. In various bundles, you can then decide whether the plate with radio holder is intended for the driver's or passenger's side. In the case of the base plate with radio holder, a suitable holder for the CB handset is also included in the scope of delivery. This holder uses the three attachment points of the centre mirror.The bag and plate are available in black and grey. As an alternative to the Albrecht radio, other radios with similar dimensions (104 x 100 x 25 mm) can also be attached. No additional holes are required for the base plates, as the existing holes in the sun visor are used for mounting.The bags are manufactured according to US military standards (MIL-SPEC) and our specifications by Delta Bags in Germany. The bag for the plate with radio holder is smaller due to the holder. Can be ordered either individually or in sets.Technical dimensions:Bag standard: 480x150x20 mmBag radio version: 375x150x20 mm

Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-

Adapter with RAM mount ball (1” size B) for mounting on the passenger grab handle For orders to the USA please contact seriesdefender.comand for orders to Canada rovalution.ca/

The Tailgate Organiser – Universal tailgate organisation system Whether you're a camper, off-roader or everyday driver, the universal Tailgate Organiser allows you to make good use of the unused space on your tailgate. First aid kits, gloves, multimeters or repair kits: everything has its place in the MOLLE laser-cut pockets and is immediately accessible. Advantages of the MOLLE laser-cut system: Lighter than sewn versions Quick bag change (e.g. first aid) Flat and free of annoying snags Stable hold, no slipping You can find more detailed information about MOLLE in Documents. Scope of delivery: Universal 650x250 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 650x250 mmOptional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 740x350 mmOptional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form. 

Plastic sand ladder - starting aids for up to 3.5 tons Stuck? No problem! Our sturdy plastic recovery boards will reliably get you out of any predicament. Whether it's deep sand, nasty mud, or snow, with Maximum Traction recovery aids, you're guaranteed to get your car out again. The boards have recessed handles on the sides, making them easy to carry. Of course, it's better to get our matching carrying straps right away. That way, you'll have your hands free if you ever have to go up or down a steep slope. Why we recommend plastic instead of aluminum:* Super light: Aluminum sand plates are significantly heavier. Less weight on the boards means more payload for everything else that's important.* Low noise: No annoying rattling while driving – anything that rattles metallically while driving just makes you nervous.* Flexible: Minimal deformation under load and hardly any wear even after intensive testing* Affordable: Plastic recovery boards are significantly cheaper than conventional aluminum sand platesTechnical data:* For vehicles up to 3.5 tons* Dimensions approx. 1070 x 310 x 100 mm* Weight 6 kg* Supplied in pairs Please do not use these sand plates: on hard, stony terrain, as a bridge or ramp, below temperatures of -20° Celsius

Awning holder, 2 pieces for Horntools ExRoof roof rack  Attaching an awning to our ExRoof roof rack is now even easier!   With this awning bracket, you can easily attach your awning to your roof rack.   Scope of delivery: 2 piece awning bracket

Side access step for Defender This side step makes it easier for you to access your vehicle doors. You can attach the step to both the front and rear side doors.  If required, the step can be easily folded away. Suitable for all Defener models!You can find a suitable crossbar here.

Tool Roll - modular tool bag in a set The principle of Tool Roll is as ingenious as it is old: roll out instead of junk. The square fits into the round, remains always at the intended place and therefore takes less space altogether. Can you still improve that? We say yes. The newly developed, modular Nakatanenga Tool Roll owes its added value to our experience as an off-roader, screwdriver and also as a fan of tactical equipment. The clou are big velcro surfaces on the baseplate. So our tool roll can be equipped arbitrarily and is extremely flexible in use. Depending on the set, up to six tool bags (sizes M and S) can be attached. So you take with you only the tool sets that are really needed. For better clarity, the individual pockets can be color-coded via the zip puller. Fluorescent, writable ID patches help to identify the content, even in the dark. And we also thought about it: Loose bits and pieces find their place in the sewn-in mesh pockets. The Tool Roll rolls up clean even with maximum placement and is quickly closed or opened with two clip closures. Carrying handle and shoulder strap facilitate transport. When deployed, the Toll Roll on the D-rings (two or three depending on size) is hung on the wall, on the vehicle or on the tree in the field. Robust, high-quality nylon is our material of choice to guarantee long life even with hard use. With the choice of different sizes and combinable bags you will find as a mechanic, do-it-yourself, biker or cyclist guaranteed your own, optimal Nakatanenga Tool Roll combination. Material: Bag: 100% nylon Closure: Duraflex Dimensions: Basic size small base: 25x64 cm Basic size small Velcro bag: 23x6x6 cm Basic size large base: 46x64 cm Basic size large Velcro pocket: 44x6x6 cm There is a smaller and a larger version of the tool roll - each with different accessories. Please select the desired variant. Note: Delivery is WITHOUT content!MADE IN EU The tool roll sets at a glance: Tool bag size S - set 1:• 1 x size S base plate• 4 x Velcro pocket size S. Tool bag size S - set 2:• 1 x size S base plate• 4 x Velcro pocket size S.• 1 x attachable work pad size S Tool bag size M - set 1:• 1 x size M base plate• 4 x Velcro pockets, size M Tool bag size M - set 2:• 1 x size M base plate• 4 x Velcro pockets, size M• 1 x attachable work mat size M Tool bag size M - set 3:• 1 x size M base plate• 3 x Velcro pockets, size M• 2 x Velcro pocket size S Tool bag size M - set 4:• 1 x size M base plate• 3 x Velcro pockets, size M• 2 x Velcro pocket size S.• 1 x attachable work mat size M Tool bag size M - set 5:• 1 x size M base plate• 2 x Velcro pockets, size M• 4 x Velcro pocket size S Size M - set 6:• 1 x size M base plate• 2 x Velcro pockets, size M• 4 x Velcro pocket size S• 1 x attachable work mat size M

ventilation panels side windows for Nissan Pathfinder 3 MY2008 The Nissan Pathfinder (3rd generation) is a versatile family and leisure SUV. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection from insects? Our custom-made ventilation panels with mosquito nets for the Pathfinder 3, made of sturdy aluminum, offer just that—no rattling universal accessories. Sold in pairs and powder-coated in black, they ensure pleasant air and comfort when traveling. Installation is easy: roll down the window, insert the ventilation panel, close the window again—and it's securely in place without rattling. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 520 mm  

Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task. For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.

Recovery rope, kinetic, incl. carrying bag Benefit bundle for off-road fans: High-quality kinetic recovery rope (either 19 mm or 24 mm diameter) in 8 m length - including robust mesh carrying bag. Ideal for safe and effective off-road vehicle recovery. Practical and space-saving storage.

Mudguard widening kit for the Suzuki Jimny I FJ from TREKFINDER - 4 pieces, each 150 cm long / tyre tread cover 20 mm / incl. TÜV® / universal mounting Ideal e.g. with the 56 mm wheel spacer from TREKFINDER in combination with 215 tyres on 5.5J standard rims !!! Inexpensive and flexible wing flares in very good quality indestructible and therefore durable mudguard extensions made of black rubber the fender flares are glued to the existing wing flares of the Jimny and additionally fixed with screws (the screws are not included in the scope of delivery) the factory backing film is removed and the fender flares are then glued to the clean surface SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, 150 cm each 1 TÜV® test report 1 type plate 1 piece assembly instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended