Vehicle accessories

XPL Carbon Roof Cap Kit is a high performance lightbar solution for the roof Installing work lamps, additional headlights or light bars on your vehicle is not too difficult – when you’re talking older pickups or classic Defenders, that is. Obviously, with newer cars like the New Defender one should be a lot more cautious before drilling holes or attaching brackets to the expensive exterior. Vision X Lighting specialize in custom solutions, combining top performance, sleek design and installation methods that minimize effort and actual alterations to your car. The XPL Carbon Roof Cap Kit by Vision X is an elegant and extremely powerful LED lightbar solution for the roof of new Defenders from MY 2021. The aerodynamically shaped carbon element holds two Vision X XPL Lo Pro light bars. The array of CREE LEDs produces 45 W per bar and a beam of over 600 m – providing safety in all weather conditions, off-road or on-road, for work or sports. The XPL light bar also features backlighting that can be used as daytime running lights. The installation on the roof is minimally invasive. The mounting kit contains a drill template, all required fastening and sealing materials as well as the electric connections. Specifications XPL Lo Pro Lightbars: LEDs: 5W per LED Housing material: Aluminum Light color temperature: 6000 Kelvin Voltage: 9-32V DC Current: 0.75A~7.5A@24V DC - 1.25A~15A@12V DC Vibration resistance: 21 Grms Lens material: Polycarbonate Smooth backlight Proprietary IRIS reflector technology Dual mounting standard Weatherproof Deutsch connector with plug-and-play wiring harness Certifications: CE, RoHS, IEC 62471, E mark IRIS reflector technology The XPL is equipped with a backlit halo that can be used as a daytime running light. (SAE compliant for 20" and below). Scope of delivery: Complete carbon element with two XPL-H9 light strips, brackets and wiring harness including precise fitting drilling template.

Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear.The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system.It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch, Color: black: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch, Color: black: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

Maximum transport power: Nakatanenga CargoBear for the Ineos Grenadier Quartermaster If you are looking for a truly distinct and exclusive pickup truck, look no further than the Quartermaster from Ineos, with its generous load bed and spacious double cab. To top it off, literally, our custom-made CargoBear roof rack system adds even more functionality to the rugged Grenadier. Our modular rack system transforms this workhorse with its BMW power and Magna Steyr engineering into a true adventurer. The Quartermaster's high roof load capacity of 120 kg dynamic and 375 kg static is ideal for expedition equipment or, for example, our RoofLodge roof tents.   The modular rack for the double cab's roof, which is shorter than that of the Station Wagon, is 1.83 m long when fully assembled and consists of three crossbars, two platform components, a wind deflector at the front and an end plate at the rear. The CargoBear’s Quartermaster version fits models with or without safari windows.    The ultra-flat roof rack is easily mounted to the roof rails with clamps. A hybrid solution (from the second crossbar) specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof surface to relieve the pressure on the rather soft roof rail.   As always, all aluminum and stainless steel components on the CargoBear are powder-coated in black. This means they fit perfectly with the purist design of the Grenadier.   Ineos Grenadier Quartermaster and CargoBear – the ultimate combination for work, sports, vacations or expeditions!   Material: •    3 x crossbars, 2 x platform, wind deflector, and end carrier: powder-coated aluminum (black) •    Support brackets and clamping brackets: powder-coated stainless steel (black)  

No more rust: replacement bulkhead for Td5 and 300 Tdi The bulkhead is pretty much the most complex body part in a Landy – and one of the most vulnerable components, too. For one, it’s sporting many edges, corners, folds, curves and rivet connections and requires a considerable number of screw holes: to the frame, to the connections in the engine bay and to the windshield. Add to that a whole bunch of openings for steering, pedals, air and electrics and you see the problem. All this structural complexity combined with its positioning exposes the bulkhead to water splashing up from below or trickling down from above. Dirt and chemicals collect in the nooks and crannies and trap moisture almost permanently. On the inside of the cabin condensation or leaks can produce the same effect behind the dashboard, panels or floor mats, thereby creating constant moisture exposure from both sides. No wonder, that the bulkhead is one of those components that suffer most from visible or hidden corrosion. Over time, it can even affect the frame. In case you are tired of piecemeal patch jobs on your Td5’s or 300Tdi’s rusty bulkheads or you are contemplating a proper restauration anyway, we can offer you a complete, primer-coated high-quality bulkhead, made in the EU.Material: Stainless steel

Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels BFGoodrich ALL Terrain T/A KO2 265/65 R18 117R: The BFGoodrich All Terrain T/A KO2 265/65 R18 117R guarantees driving fun even off the paved roads. It is very stable and has good road grip. It also handles not too difficult terrain with some mud, loose ground well. For extreme terrain and little road use, however, a MUS tyre is recommended. In the AT range BFGoodrich is a very good choice. A SPECIAL TYRE MIXTURE that is resistant to cuts and chipping on the sidewalls to withstand sharp stones. Designed to resist chipping and cracking caused by sharp stones and obstacles in the terrain. IMPRINTED CLAMPS on the sides for more grip and better sidewall protection. The large crampons on the sidewall are synonymous with bite, especially when the tyre is rolling at low pressure. Greater thickness of rubber on the sidewall protects the tyre from off-road hazards. STRENGTHENED CABLES for less sensitive sidewalls. Flank weakness can spoil off-road activities very quickly. Oversized sidewall cables give the carcass the protection it needs for tough off-road use. Performance 50% off-road - 50% on-road Tyre width 265 Ratio of sidewall height to tyre width in percent 65 Rim diameter: 18" Load index: 117/114 Speed index: R 3PMSF Alpine symbol (so-called snowflake): yes M+S marking: yes Weight: 23,06 per tyre Tyre type: All-season Tyre type: Radial Noise emission: 74db Noise class (from 1-quiet to 3-noise): 2 Wet grip (grip on rain-soaked road): B Fuel efficiency (A to G): F When ordering, please let us know whether the white lettering is to be fitted inside or outside.BORBET CW7 alloy wheels 18 inch:With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Nakatanenga winch bundle Tigershark 9.5 or 11.5 for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch Tiger Shark 11500 / 9500  has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 11.5 / 9.5 electric winch has waterproof sealed relays for high electrical currents, allowing longer duty cycles.It is used for commercial recovery of rolling loads. Technical data of the Tigershark 9.5 winch: Rope speed: 5.7 - 1.2 [m/min].Pulling force: 4.3 tVoltage: 12 VWeight: 41 kgPower consumption at full load: 340 A  Technical data of the Tigershark 11.5 winch: Rope speed: 5.7 - 0.6 [m/min].Pulling force: 5.2 tVoltage: 12 VWeight: 42 kgPower consumption at full load: 410 A The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Bundle consisting of: 1x cable winch Tigershark 9.5 or 11.5 - please select the appropriate version1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate   impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.

Ready for winter: Complete wheel set with Weathermaster WSC on sturdy Borbet CW7 rims BF Goodrich All Terrain T/A KO2 275/55R20 – The classic for road and off-road use Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18" Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.  

Pirelli Scorpion A/T+ – All-terrain tyre with snowflake symbol Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T: Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges. Performance: 40% off-road - 60% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: T 3PMSF Alpine symbol (so-called snowflake): yes Tyre type: All-season Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): D Fuel efficiency (A to G): D Weight: 18.72kg Tread Name: Scorpion A/T+ BORBET CW7 alloy wheel 18 inch: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18" offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.  

Bundle with Horntools Alpha winch incl. recovery accessories   In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery: The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics.Instead of the conventional steel cable, the winches have a synthetic fibre cable made of high-strength fibre. This is not only significantly lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data winch Horntools Alpha 9.5 - Working range voltage: 10-16 Volt- Max. Power consumption 365 Amp **- Train speed free of load 7 m / minute- Traction 4,300 kg **- 3-stage planetary gear 230:1 geared down- Gross weight: 40 kg- Net weight: 32.3 kg- Weight with steel cable and roller cable window: 37.5 kg- Series wound motor *- Drum (ØxLength): 63x226 mm- Overall size (LxWxH): 577 x 160 x 225 mm Technical data winch Horntools Alpha 12.0:- Working range voltage: 10-16 Volt- Max. Power consumption 600 A **- Train speed free of load 11 m / minute- Traction 5,400 kg **- 3-stage planetary gear 110: 1 geared down- Net weight: 25.8 kg without rope and rope window- Series wound motor *- Drum (ØxLength): 63x226 mm- Overall size (LxWxH): 577 x 160 x 225 mm * Series motor with an electrically generated magnetic field ** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Bundle consisting of: 1 x winch Horntools Alpha 9.5 or Alpha 12.0 - please select the appropriate variant1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden high-beam headlights black, with 70mm Nolden high-beam headlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier winch" is possible at numerous test centres without any problems by means of an individual acceptance for which a fee is charged. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - from experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate LUBI-FILL impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.  

Premium off-road tyres Radar Renegade A/T AT5 265/65 R18 114H Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained from motorsport, countless victories in the Lucas Oil races and the TORC championships, flows into the production of these premium tyres.Off-road tyres for the whole Big Radar Renegade A/T AT5 265/65 R18 114H is a popular all-terrain tyre in a class of its own. Whether on sandy, rocky or muddy roads, or completely off-road, the tread pattern and durable compound of this model allow the Radar Renegade A/T AT5 265/65 R18 114H to be used as an on-road tyre but also off-road. Performance: 30% off-road - 70% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: H M+S marking: yes Weight: 19,07kg per tyre Tyre type: Summer Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): E Fuel efficiency (A to G): E Tread Name: Renegade A/T AT5 When ordering, please let us know if the white lettering is to be fitted inside or outside. BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Side steps available for: Defender 110 & 110 Hard Top - from 2020 Defender 130 - from 2020 Side running boards and door sills, black powder-coated, with anti-slip tape and stainless steel filler plates. Designed for mounting on the existing brackets in the sill.The plastic sill covers need to be slightly modified to gain access to the fixing points. An adapter is supplied for use with the original jack.

Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery. Technical data: Transmission 3-stage planetary gear max. Tractive force 4300 kg max. Pulling speed 15 m/min* Motor power 3.8 hp Engine type Series Wound** Reduction ratio 110:1 Max. Power consumption 530 amps Voltage 12 V Rope (∅ x length) 10 mm x 30 m Drum (∅ x length) 63 x 223 mm Overall size (LxWxH) 574 x 160 x 225 mm Weight of cable winch 29.1 kg Weight of installation set 13.6 kg Total weight 42.7 kg Installation time 5 hours Features: Motor IP67 sealed by groove with sealing ring Freewheel lever Stainless steel cross braces Reinforced cable drum Powder-coated aluminium die-cast housing Motor/gearbox Internal drum brake with 3 brake shoes Removable control unit (so that the control unit can be installed as required) Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.

For customers who need a winch on their Land Rover Defender but do not want the classic, martial look of a "normal" winch bumper we've developed the Hidden Winch Mount Kit. It is suitable for all Land Rover Defender 90/110/130 and allows an well hidden mounting of many common winches while maintaining a very "civil" look. In addition to the discreet appearance, the Nakatanenga Hidden Winch Mount Kit has many other product advantages: Improved slope angle of the vehicle by raised corners of the bumper Improved protection of the vehicle front by stable construction Protection of the rope against UV rays (important for plastic ropes!), rain and dust Improved theft protection due to hidden mounting location Suitable for vehicles with or without air conditioning (depending on the vehicle cutouts may be required on the grille) The freewheel of most winches is still accessible (you don't need a winch with an externally controllable freewheel) Integrated underrun protection (optionally aluminium natural or black powder-coated) to protect the steering linkage No repositioning of the license plate We recommend the following winches for use with the Hidden Winch Mount Kit: Superwinch TigerShark 9.5SR Superwinch TigerShark 11.5SR Superwinch Rock 98 Superwinch Rock 12.8 Among other winches, the following winches can not be used: Superwinch Talon Warn 8274 The bumper must be registered in the vehicle documents. This can be done by a fee-based individual acceptance. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.

Nakatanenga CargoBear for Ineos Grenadier The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static). All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change. In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions: As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel. As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel. There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows. As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters. As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier. Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition! The Trier Fire Brigade also relies on our quality – equipment that meets the highest standards! Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black) MADE IN GERMANY

Nakatanenga CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny –  due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs. The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces. The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories. The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety. The modules are supplied with all the necessary fastening material. Wind deflector and end carrier are included in the scope of delivery. Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.

Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!

Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black The ABNTR4X4 Rockslider in black for the INEOS Quartermaster is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the rigidity under lateral loads in off-road use, the elongated holes on the sides are dimpled inwards. It is mounted on the original mounts without drilling. The Rockslider is mounted directly underneath the doors instead of the plastic panelling. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Quartermaster is not changed or impaired. The Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface of drawn studs. Thanks to its shape, the Rockslider also protects against excessive dirt in the field. The dirt picked up can be rinsed out again through openings on the underside. Technical data: Suitable for Quartermaster 25 kg per Rockslider incl. bracket Mounting on original fastening points Delivery: 1 set of Rockslider stainless steel, colour black (left & right) Bracket and fastening material (left & right) Set of galvanised screws Utility model protection: 20 2023 001 190.6 Shipped on a pallet. Registration by individual approval possible.

Mobile parking heater with aluminum box, various versions Make way, here comes the second generation of our mobile parking heaters in a box! We have packed even more technology, even more experience and even more customer feedback into our new mobile heating boxes. If you are looking for a small, self-sufficient and portable heat source with unrivaled capacity for cold days and nights in unheated outdoor shelters or temporary accommodation, you get everything you need (or want) in a small, weatherproof aluminum box. Available in three modular versions with different configurations, the Nakatanenga heating box provides the perfect, independent heat source for tents, gazebos, garden sheds, mountain huts, snack stands, stalls and much more. The heart of the mobile parking heater is the Autoterm Luft 2D, a diesel-powered air heater with a maximum heat output of 1.8 kW and a diesel consumption of just under a quarter of a liter per hour at full power. With a tank capacity of 18 liters in the twin-tank version, this means that it can heat at full throttle for over 70 hours. The economical unit, which is also very quiet at 55 dB thanks to the exhaust silencer, is controlled by a digital control unit with timer in the version with two batteries and can also be switched on and off by radio remote control. This allows you to preheat your camper, roof tent, caravan or hunting lodge in good time for getting up or for the evening, for example, and operate it from the place where you are staying or sleeping inside*. In contrast to the previous models, the three versions of our mobile parking heater are now only available in one box size, namely 42 liters. This is significantly more compact than the old version in the large version and only slightly more voluminous than the small model from before. What is the advantage? The new universal crate has a modular interior with a powerful performance. Depending on whether you need tanks, batteries or both in the box, you can choose the appropriate version when purchasing: with 9.2 L single or 18.4 L double tank, each without battery, as well as with single tank, two batteries and digital control. However, it can also be easily retrofitted or converted if requirements change. This is made possible by elaborately designed brackets in the box and the use of specially manufactured, made-to-measure tanks.   Features of heating box 1 and 2 (without battery) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- PU5 control panel (without timer and storage options)- 12 V connection socket for supplied pole terminal cable- Alternatively, a cable for cigarette lighter (KMSH cable) can be used- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”   Features of heater box 3 (with 2 AGM batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)   Equipment of heating box 4 (with 1 LiFePo battery) - USB interface for charging smartphone, power bank, tablet etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)-> Please only use LiFePo-compatible chargers Equipment of heating box 5 (with 2 LiFePo batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”-> please only use LiFePo-compatible chargers The warm air is transported via a firmly screw-fastened, waterproof Flexi hose. As the warm air hose is different for every user and every requirement, we do not include a standard length, but leave it up to you to order the desired length separately here in the store, with or without a silicone sleeve. You can find the perfect storage bag for the Flexi hose here in the store. Regardless of the configuration, the mobile parking heaters are always easy to transport and make the difference between experiencing and suffering in the cold seasons. Whether it's an aurora safari, selling cookies at the Christmas market or winter camping in a roof tent, nothing is really fun if you freeze to death. *ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. In addition, for optimum heating performance, make sure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. Dimensions Internal dimensions 550x350x220 mm External dimensions 580x380x240 mm Empty weight: 2 tanks, without battery: 18 kg 1 tank, without battery: 16 kg 1 tank, 2 batteries: 36 kg Depending on how many starts are made, the battery lasts at least 40 h, but more likely between 60 and 70 h.  LiFePo4 batteries - i.e. batteries with a lithium iron phosphate cathode - are the ideal supply batteries for camping or electrical work on the move. In contrast to conventional lead-acid AGM technology, lithium batteries combine superior charging properties with much lower weight and volume and a long service life. LiFePo4 batteries can be deep-discharged without any problems, which sooner or later leads to irreparable damage with AGM batteries, as the rule of thumb here is that you should never draw more than 50% charge. If you are not dependent on the greater cold tolerance of AGM batteries, you should definitely consider the higher costs for LiFePo4 batteries and compatible charging technology. The weight and space savings, the long service life and the uncomplicated discharging and charging of the battery are strong arguments in favor of the investment. What's more, LiFePo4 technology is also extremely safe And a special note on aluminum: Although we take the utmost care during storage and shipping, as with all our products, aluminum boxes can always show minimal scratches, stains, dents or other surface features upon delivery. These are material-related and result from the specific properties of the light metal.  In contact with oxygen, aluminum forms a natural, corrosion-protecting patina and is also relatively soft compared to steel, which is three times heavier. This makes the material ideal for use in sheet metal, especially when weight and resistance are important. On the other hand, however, it also means that aluminum can never be completely free of patina or other marks, even on delivery: Small scratches, stains etc. therefore do not constitute grounds for complaint. Ultimately, aluminum boxes are intended to be robust objects of daily use. Like everything that is actively used, they develop an individual patina and every trace of use tells a story. So, have fun with it! If you want to heat the interior of your vehicle, we offer an installation service for warm air ducting through a ventilation plate.   Please note the variants without batteries:  Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating mobile parking heaters. The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this. Suitable battery boxes for operating the mobile parking heater Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.   EQUIPMENT HIRE:  Hire an AUTOTERM 2D12 mobile diesel/air heater in an aluminium case with battery If you only need a mobile space heater for a short period, you can easily hire one here:   Click here to make a no-obligation enquiry! Rental prices   1 week(7 days) 2 week(14 days) 3 week(21days) 4 week(30 days) AUTOTERM 2D12 in an aluminium case WITH battery 292€ 389€ 447€ 486€     Prices include VAT PLEASE NOTE: As a precaution, we would like to point out that the appliance must not be used indoors due to the risk of poisoning from exhaust fumes. Furthermore, to ensure optimum heating performance, please ensure that the air intakes for combustion and hot air are positioned in a way that protects them from the weather. Our hire heaters (battery-powered) are supplied in wooden crates and delivered by a haulage contractor. The diesel tank is empty on delivery and MUST also be empty when returned!

The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.

The Power Winch System Beta for the Suzuki Jimny The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes. Technical data: Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours Features: Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.

Winch incl. winch window, plastic rope and winch hook The strongest and fastest winch in this design. With its low weight and compact dimensions, it is perfect for vehicles with a total weight of up to 6 tons. In contrast to its predecessor, this model has a gear brake instead of a drum brake. The gear brake does not wear out compared to the drum brake and loses no braking effect when used for a long time. With the 2-speed gearbox, the winch manages almost 50m / minute! Furnishing: 2-speed gearbox with high-speed gear Remote control 1x cable 1x radio integrated (delivered without battery) Potted reinforced relay (contactor) waterproof stable powder-coated contactor housing made of deep-drawn sheet metal Motor & gearbox IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) Freewheel lever * Gearbox neutral - 1st gear - 2nd gear Cross struts and equipment made of stainless steel reinforced rope drum ** (suitable for use with plastic ropes) powder-coated aluminum die-cast housing motor / gearbox transmission brake Cable length: 1.6 m Cable cross-section: 35 mm² 3 year guarantee operation manual * A freewheel lever is used to decouple the gearbox and to unwind the winch quickly by hand. ** Plastic cables load the cable drums laterally by far more than steel cables Technical specifications: Working range voltage: 10-16 Volt Max. Power consumption 500 Am ** Train speed without load 15/41 m / minute Traction 5,400 kg ** 3-stage planetary gear 267/86: 1 geared down Net weight: 32 kg without rope and rope window 5.4 KW Series Wound Motor * Drum (ØxLength): 63x223 mm Overall size (LxWxH): 637 x 160 x 254 mm * Series motor with electrically generated magnetic field, power = with a standard 70 AH battery ** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. Material:The cable winch is made of aluminum and high-strength stainless steel. High strength so that the steel can withstand the loads. This steel can also oxidize, i.e. if the parts are exposed to salt in winter, you should care for them every now and then and let them in with a thin oil film. We have to do that maintenance instructions are provided in the download area. The pulling force of the winch is highest on the first or lowest rope layer on the drum. Similar to a bicycle gear shift. The less rope there is on the drum, the slower the winch pulls and the more power it has. first gear low speed second gear high speedRope pull speed Speed ​​Rope pull speed1 5,440 9 m / min 1 870 25 m / min2 4,340 11 m / min 2 694 30 m / min3 3,605 13 m / min 3 676 35 m / min4 3,080 15 m / min 4 490 41 m / min Scope of delivery:1 x winch1 x winch rope - optionally in orange or gray1 x winch window1 x winch hook

ExRoof roof rack for Volkswagen Transporter & Multivan T5/T5.1/T6/T6.1 - L2/SWB with long wheelbase (year of construction 2003 to present) Attention: Not compatible with VW T6 California (pop-up roof) and VW T6 Doka (flatbed with double cab)   The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the VW Multivan & Transporter of the T5 / T5.1 / T6 / T6.1 model series with long wheelbase (L2/SWB) is made of powder-coated aluminum and therefore weighs just 49.7 kg. Measuring 2950 x 1500 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Practical accessories such as ring eyelets, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack. Product highlights: Roof rack uses the original mounting points, no drilling required Compatible with VW T5 & T6 Multivan, Transporter, Caravelle and Kombi Rubber pad between roof rack base and vehicle to protect against corrosion Four individual roof rack feet provide stability in a lightweight construction Hardly any wind noise thanks to aerodynamic deflector Technical data: Dimensions: 2950 x 1500 mm (platform) Weight: 49.70 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Height: approx. 10 cm (at the highest point between the car roof and the upper edge of the roof rack) Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable  cable harness  complete cable winch control radio remote control (supplied without battery)  cable remote control mounting plate complete with installation material  installation material  installation & operating instructions  TÜV parts certificate.

The high-quality sliders made of 3mm stainless steel fit all Mercedes G-models 461 and 463 and can be easily attached to the original stopping points of the running boards. The stable design offers optimal protection for your vehicle from the side and from below. The fitted shape fits perfectly to the silhouette of the vehicle and the high seat of the "G-Silde" also ensures an unchanged ramp angle. The distinctive design of Abeneuer4x4 also applies to this product "Made in Germany": the drawn knobs. These also offer a non-slip surface and ensure a secure stand. Dirt can be rinsed out through openings on the underside of the slider. Material:Stainless steel, black powder-coated Important NOTE:The original screwing points of the running boards must be available for smooth installation of the G-Slide. Scope of delivery:1 set of rock sliders (left & right) including holder and fastening material. As a useful add-on, there are matching anti-slip pads for the Rockslider.

Mobile parking heater without battery and in aluminium box You can find information on hire equipment below. “It's a Thin Line Between Love and Hate” is the old song and this thin line between loving and hating the same thing is definitely the line on the thermometer in winter. If you freeze off the part of your body with an A, you're guaranteed not to enjoy even the fattest fish at the ice hole, the most magical aurora borealis or the greatest fun at the elephant meeting. That's why we have our solution for all outdoor activities in the cold seasons in the Alubox Pro: the AUTOTERM parking heater for on the go! With the exception of the battery, everything you, your family or your crew need for a warm and cozy outdoor feeling in your car, camper or roof tent is in the ultra-robust, waterproof 29L box. At its heart is the affordable and powerful AUTOTERM (Planar) 2D12 air heater, which can be powered from the vehicle battery via the cigarette lighter adapter. It is controlled via the PU5 control element. A 5.4 l fuel tank is already integrated in the box. This makes our mini heater ideal for on the road and mobile use on the vehicle or wherever a weatherproof cable connection to a car battery can be established. The warm air is transported into the room to be heated via a firmly screw-fastened, waterproof Flexi hose, which can be ordered separately in the desired length here in the store. ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. Furthermore, for optimum heating performance, care should be taken to ensure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. You can find the perfect storage bag for the Flexi hose here in the store.A larger standalone version of this parking heater with integrated battery is available here. You can also hire this parking heater from us.  Alu-Box Pro (29 liters) waterproof/dustproof according to IP54 standard AUTOTERM (Planar) 2D diesel / air heater ✔ Fuel tank (5.4 liters)✔ Hot air pipe connection, non-return valve, outlet and inlet feed-through✔ Including radio remote control✔ The openings for supply and exhaust air and for the power supply are splash-proof (can be closed with a screw cap or rubber plug)Dimensions of the aluminum box: WxHxD 390x340x290mmDimensions of the box with spigot: WxHxD 490x340x290Total weight: 11.2 kgTechnical data of the parking heater:- Fuel type: Diesel- Heating output: max. 1.8kW, min. 0.8kW- Volume of heated air: max. 75m³/h, min. 34m³/h- Fuel consumption during operation: max. 0.24l/h, min. 0.1 l/h- Power consumption during operation: max. 29W, min. 10W- Manual start/stop- Connection to a car battery or another external 12V battery PU-5 control element: - LED for ventilation display- LED for operating display- Temperature adjustable via rotary control The AUTOTERM Air 2D (Planar 2D) is equipped with an altitude kit! This means that the heater automatically reduces the injection volume according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content falls. The maximum heat output decreases in proportion to the amount of oxygen in the air. Roughly speaking, from 2000 meters upwards, the loss of output per 500m altitude is approx. 5%. Manufacturer tests up to 3440m were problem-free. No problems are to be expected up to 4000m. Up to 5000m the software calculates itself - but this could not yet be tested at real altitude. Please note: Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating the mobile parking heaters.The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this..In general, however, direct connection to the battery terminals is the best solution   If you want to heat the interior of your vehicle, we offer an installation service for warm air ducting through a ventilation plate.   Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.   EQUIPMENT HIRE:  Hire an Small independent mobile heating system w/o battery Click here to make a no-obligation enquiry!    Rental rates   1 week(7 days) 2 week(14 days) 3 week(21 days) 4 week(30 days) AUTOTERM 2D12 in Alubox without Batterie  239€  318€  365€  398€  Prices include VAT PLEASE NOTE: As a precaution, we would like to point out that the appliance must not be used in enclosed spaces due to the risk of poisoning from exhaust fumes. Furthermore, to ensure optimum heating performance, please ensure that the air intakes for combustion and hot air are positioned in a way that protects them from the weather. Our hire heaters are delivered in wooden crates. The diesel tank is empty on delivery and MUST also be empty when returned!

The innovative horntools ExRoof roof rack is your perfect everyday companion! Attention: Not compatible with VW T6 California (pop-up roof) and VW T6 Doka (flatbed with double cab)   Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the VW Multivan / Transporter / Caravelle / Kombi of the T5/ T5.1 / T6 / T6.1 (L1/SWB) / short wheelbase model series is made of powder-coated aluminum and therefore weighs just 47 kg. With a size of 2675 x 1500 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Roof rack uses the original mounting points, no drilling required Compatible with VW T5 & T6 Multivan, Transporter, Caravelle and Kombi With rubber pads between roof rack base and vehicle to protect against corrosion Four individual roof rack feet provide stability in a lightweight construction Hardly any wind noise thanks to aerodynamic deflector ExRoof roof rack for Volkswagen Transporter & Multivan T5 / T5.1 / T6 / T6.1 - L1 / SWB with short wheelbase (year of construction 2003 to present)   Practical accessories such as ring eyelets, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack.   Technical data: Dimensions: 2675 x 1500 mm (platform) Weight: 47 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Height: approx. 10 cm (at the highest point between the car roof and the top edge of the roof rack) Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

Horntools ExRoof roof rack - a perfect fit for the G-Class The ExRoof roof rack from horntools was specially developed for the Mercedes G-Class and is the ideal solution for everyday use and adventure. Thanks to the all-round profile rails, a wide range of accessories can be flexibly attached using slot nuts - from roof tents to transport boxes.   Made from lightweight but durable aluminium, the carrier weighs just 46.3 kg. With a generous surface area of 2400 x 1500 mm, it offers plenty of space for your equipment - perfect for anyone who wants to customise their G-Class without drilling.    Technical information: Roof rack uses the original attachment points, no drilling required With rubber pads between roof rack base and vehicle to protect against corrosion Specially developed for the Mercedes G-Class from model year 2018 Hardly any wind noise thanks to aerodynamic deflector Dimensions: 2400 x 1500 x 49 mm Weight: 46.3 kg (roof rack feet + roof rack platform) Finish: RAL 9005 powder-coated Height: approx. 12.5 cm (at the highest point between the car roof and the upper edge of the roof rack) Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

Lockable drawer system for Defender Td4 & Td5/Tdi - stable, spacious & well thought-out From storage space in the vehicle you can never have enough. And lockable storage certainly not! This new drawer system for the Td4 and Td5 / Tdi consists of a spacious aluminum drawer with galvanized slide rails, two removable partitions and a robust cover plate. The drawer fits between the wheel arches and is covered by the cover platform. Your vehicle is on a slippery ground? In contrast to other vehicles, the drawer does not click on again - thanks to the locking of the sliding strips at half and full length! The drawer system is suitable for Defender Td4 and Td5 / Tdi. Depending on the type of vehicle (Td4 or Td5 / Tdi), the cover varies in size. Dimensions: Drawer (outside, incl. Front panel): length 1,010 mm, width 745 mm, height 190 mmDrawer (inside): length 965 mm, width 645 mm, height 165 mmTD4 cover (basic dimensions): length 1,110 mm, width 1,145 mmTd5 cover (basic dimensions): length 1.110mm, width 905mm Mass: Drawer: 25 kgCover: 9 kg Material: Drawer: high-quality aluminum, surface black powder-coatedHeavy duty rails: steel, galvanizedDoor lock / handle plate lock: stainless steel (V2A) Delivery: 1x drawer (aluminum) with ...... 2x demountable partitions... 2x heavy duty rails (galvanized)... 1x door lock / handle plate lock (stainless steel)1x wooden cover (covered with felt)Further product features: 180 kg support loadLocking: Half and full length (vehicle is wrong? No problem!)Theft protection: lockable door lock This drawer system is suitable for all 90 and 110 Station Wagon models.

Rock sliders If you love the chic exterior of your New Defender 110 (from model year 2020), there's nothing better than giving it the rock sliders from Terrafirma. They not only provide reliable protection from sticks and stones off-road, but also from shopping cart hooligans and door bumpers in the supermarket parking lot. The installation of the protective tubes, which also serve as an entry aid, is extremely easy thanks to detailed instructions. The necessary holes in the frame and the cutting of the underbody covers are kept to a minimum.  All fastening materials are included.     

High-quality protection with Mike Sanders for Jeep Wrangler JK The best investment in the value retention of your vehicle is a treatment with the proven Mike Sanders anti-corrosion grease and TimeMAX underbody protection - here at a flat rate for the Jeep Wrangler JK and Jeep Wrangler Unlimited JK (from model year 2007). The flat rate applies to vehicles in new or as-new condition without heavy soiling/rust. If more work is required (rust removal/cleaning), this will be charged at cost. We can only give an exact price after inspecting the vehicle - but the Mike Sanders treatment is particularly worthwhile for older vehicles with rust - the rusting process is stopped as the oxygen required for this no longer reaches the affected parts.   The flat rate includes a visual inspection using an endoscope before and after the treatment.   Please select the wheelbase of your vehicle.   When ordering, please include your telephone number for the necessary appointment. Fitting is only possible on site in Berg near Neumarkt (postcode: 92348).