ClimAir wind deflector for Ineos Grenadier, front Off-road vehicles are not designed for aerodynamics and turbulent air flows, of course. This is seldom noticeable when driving, because you don't usually reach the corresponding speed ranges. However, there is one aspect in which the Defender's rustic box shape very quickly reveals annoying disadvantages, and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the Landy's ventilation is weak and the windows mist up, you'll be glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the interior of the car. This annoys even hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the Defender provide an immediate remedy and guarantee an improved supply of fresh air and a pleasant interior climate in all seasons. The screens made of moulded acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when travelling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke grey and black and are supplied with a general operating permit (ABE). Fitting is a matter of minutes with the enclosed instructions. The wind deflectors are available in pairs for front or rear doors and must be ordered separately. Suitable for:INEOSGRENADIER off-road vehicle, (2022 -) off-road vehicle closed, 5 doorsGRENADIER panel van/off-road vehicle, (2022 -) panel van/off-road vehicle closed, 5 doorsGRENADIER Quartermaster, (2023 -) Pickup, 5 doorsGRENADIER Quartermaster, (2023 -) Flatbed/chassis, 5 doors  

Sun visor organizer for Ineos Grenadier With its classic boxy design – inspired by the old Defender, of course – the Ineos Grenadier is as spacious as can be. And there’s the catch, because it is very easy to lose track of all your small and important things in the Grenadier’s huge cockpit. But now there’s an easy solution available: our practical organizer for the sun visor features a spacious zipper pocket, MOLLE and Velcro patches. All your essential vehicle documents, parking licenses, keys, pens, sunglasses and other small paraphernalia can be kept within easy reach at all times, without restricting your forward vision or driving attention in any way. Four sturdy Velcro straps guarantee a tight fit on the sun visor, even in rugged off-road terrain. The organizer is made of PU coated nylon 6.6 fabric and therefore extremely durable and easy to clean. Available in black Dimensions:on the sun visor: 46.5 cm x 16.5 cmopen: 46.5 cm x 33 cm Each organizer has to be ordered separately.

Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.  

Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For the CargoBear, we offer ready-cut, self-adhesive anti-slip pads measuring 16 x 24 cm individually or in sets of 3, 6 or 12. Please note: the multi-packs provide increasing savings regarding the price per item. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.

British thoroughbred off-roader It looks like an off-roader. And its shape is strongly reminiscent of the blessed Land Rover Defender. But it is better, more practical and more suitable for everyday use than the off-road icon has ever been, dispensing with all the small, typically British quirks - and yet it was developed in the UK: With the Grenadier, the Ineos company - unencumbered by any off-road vehicle history - presented an off-road vehicle that immediately won over the extremely critical scene. Here is the first book on the development and history of this high-flyer, written by off-road expert Jörg Sand, who has followed its development from the very beginning. The shooting star among off-road vehicles Frst documentation about the unique British off-road vehicle Current developments and exciting insider information