Das könnte Sie auch interessieren
ClimAir INEOS Grenadier wind deflector, rear
From
€57.00*
ClimAir wind deflector for Ineos Grenadier, rear
Off-road vehicles are not designed for aerodynamics and turbulent air flows, of course. This is seldom noticeable when driving, because you don't usually reach the corresponding speed ranges. However, there is one aspect where the Defender's rustic box shape very quickly reveals annoying disadvantages and that is the almost rectangular and fairly vertical windows.
Especially when driving off-road or in cold and wet conditions, for example when the Landy's ventilation is weak and the windows mist up, you'll be glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the interior of the car. This annoys even hardened off-roaders.
The perfectly fitting and extremely robust wind deflectors from ClimAir for the Defender provide an immediate remedy and guarantee an improved supply of fresh air and a pleasant interior climate in all seasons. The screens made of moulded acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when travelling. And the improved supply of fresh air is also good news for smokers and their passengers.
The wind deflectors are available in transparent, smoke grey and black and are supplied with a general operating permit (ABE). Fitting is a matter of minutes with the enclosed instructions.
The wind deflectors are available in pairs for front or rear doors and must be ordered separately.
Suitable for:INEOSGRENADIER off-road vehicle, (2022 -) off-road vehicle closed, 5 doorsGRENADIER panel van/off-road vehicle, (2022 -) panel van/off-road vehicle closed, 5 doorsGRENADIER Quartermaster, (2023 -) Pickup, 5 doorsGRENADIER Quartermaster, (2023 -) Flatbed/chassis, 5 doors
Product number:
NACLS004M2243D-BM
ClimAir INEOS Grenadier wind deflector, front
From
€85.00*
ClimAir wind deflector for Ineos Grenadier, front
Off-road vehicles are not designed for aerodynamics and turbulent air flows, of course. This is seldom noticeable when driving, because you don't usually reach the corresponding speed ranges. However, there is one aspect in which the Defender's rustic box shape very quickly reveals annoying disadvantages, and that is the almost rectangular and fairly vertical windows.
Especially when driving off-road or in cold and wet conditions, for example when the Landy's ventilation is weak and the windows mist up, you'll be glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the interior of the car. This annoys even hardened off-roaders.
The perfectly fitting and extremely robust wind deflectors from ClimAir for the Defender provide an immediate remedy and guarantee an improved supply of fresh air and a pleasant interior climate in all seasons. The screens made of moulded acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when travelling. And the improved supply of fresh air is also good news for smokers and their passengers.
The wind deflectors are available in transparent, smoke grey and black and are supplied with a general operating permit (ABE). Fitting is a matter of minutes with the enclosed instructions.
The wind deflectors are available in pairs for front or rear doors and must be ordered separately.
Suitable for:INEOSGRENADIER off-road vehicle, (2022 -) off-road vehicle closed, 5 doorsGRENADIER panel van/off-road vehicle, (2022 -) panel van/off-road vehicle closed, 5 doorsGRENADIER Quartermaster, (2023 -) Pickup, 5 doorsGRENADIER Quartermaster, (2023 -) Flatbed/chassis, 5 doors
Product number:
NACLS003P0245D-BM
Wheel spacers TREKFINDER for Ineos Grenadier 66mm per axle
From
€149.00*
TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres
Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels.
The following vehicles are approved according to the TÜV parts certificate:
Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*...
The following wheel/tyre combinations are approved according to the TÜV parts certificate:
265/70R17 with 7.5x17255/70R18 with 8.0x18
Scope of delivery:
Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate
Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained.
Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel.
Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met:
- Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.
Product number:
1-INGRSPVS-1AM
Modular vehicle panel, for Ineos Grenadier rear side windows, outside
From
€369.00*
Modular vehicle panel, for Ineos Grenadier rear side windows, exterior
Ineos intended the Grenadier to become the heir to the old Defender in terms of off-road capability and versatility. Many well-designed details show that this was no empty promise by Ineos. The standard airline rails above the rear mudguards, for example, are a feature that every proper 4x4 should have, because real off-roaders or overlanders want to transport important equipment on the outside of the vehicle without having to drill holes or making other destructive modifications.
Our modular MOLLE vehicle panels for the Grenadier are very easy to attach to the airline rails mentioned above and the rain gutters via stainless steel brackets. The universal design allows mounting on both the left and right side of the vehicle. Dismantling possible without leaving a trace.
The sturdy mount plate made of black powder-coated aluminum enables the safe transport of anything that is MOLLE-compatible and can be attached with straps, clamps or quickfists, for example. The maximum load capacity is 25 kg, roughly equivalent to a 20-liter canister of water or fuel.
By the way: The panels are also available in a double pack at a discount price of € 699.
All fastening materials are included.
Dimensions: 49,5 x 90 cm
Max. Load capacity: 25 kg
Please note: with some roof racks, there may be problems during installation. The area in front of the grab rail must be free, please check beforehand. CGB-Ineos works 100%.
Product number:
MFP-GREN-HAM
TACV Modular vehicle panel for Ineos Grenadier, rear door inside, 2-piece
€199.00*
Molle panel for the two rear door windows inside / Ineos Grenadier
The aluminium window panels are simply attached to the inside of the windows using suction cups and are compatible with all Molle products in our range. The possibilities for combination and personalisation are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, these modular panels make it possible. Dismantling possible without leaving a trace.
The panels can also be drilled permanently as an option. Material for this is included.
Material: Aluminium, black powder-coated
Scope of delivery: 2 vehicle panels, incl. fastening material (suction cups and screws for optional drilling)
Product number:
MFP-GREN-HTI
Seat cover for driver and passenger side Ineos Grenadier
From
€219.00*
Seat cover for driver and passenger side Ineos Grenadier
The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car.
Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat.
The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted.
Our seat covers are available in black with plain-colored MESH inserts.
Material: nylon, PU-coated
This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes!
And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.
Product number:
SIBE-GREN-F-BLKM
CargoBear 2.0 system roof rack - for Ineos Grenadier
From
€2,149.00*
Nakatanenga CargoBear for Ineos Grenadier
The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static).
All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change.
In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions:
As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel.
As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel.
There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows.
As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters.
As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier.
Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition!
Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black)
MADE IN GERMANY
Product number:
CGB2-GREN-1M
Lowering spring kit for INEOS Grenadier from TREKFINDER - 30 mm
€1,099.00*
Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres
the lowering is approx. 30 millimetres
suitable for 6-cylinder diesel & petrol engines
for vehicles WITHOUT winch
the standard shock absorbers can still be used
Trailer operation is permitted
Suitable for the following versions:
Vehicle manufacturer: Ineos Automotive ( UK )
Commercial designation / version: INEOS GRENADIER
Permissible axle loads ( v / h ) in kg: 1667 / 2150
Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*...
Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*...
Scope of delivery:
4 pieces TREKFINDER coil springs ( HA progressive and VA linear )
1 piece TÜV® parts certificate
Product number:
1-INGRTI
Lifting spring kit for INEOS Grenadier from TREKFINDER WITHOUT cable winch + 30 mm
€899.00*
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres
the lift is approx. 30 millimetres
suitable for 6-cylinder diesel & petrol engines
for vehicles WITHOUT cable winch
the standard shock absorbers can still be used
Trailer operation is permitted
Suitable for the following versions:
Vehicle manufacturer: Ineos Automotive ( UK )
Commercial designation / version: INEOS GRENADIER
Permissible axle loads ( v / h ) in kg: 1667 / 2150
Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*...
Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*...
Scope of delivery:
4 pieces TREKFINDER coil springs ( HA progressive and VA linear )
1 piece TÜV® parts certificate
<iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Product number:
1-INGR
Lifting spring kit for INEOS Grenadier from TREKFINDER WITH cable winch + 30 mm
€899.00*
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres
the lift is approx. 30 millimetres
suitable for 6-cylinder diesel & petrol engines
exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front
the standard shock absorbers can still be used
Trailer operation is permitted
Suitable for the following versions:
Vehicle manufacturer: Ineos Automotive ( UK )
Commercial designation / version: INEOS GRENADIER
Permissible axle loads ( v / h ) in kg: 1667 / 2150
Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*...
Scope of delivery:
4 pieces TREKFINDER coil springs ( HA progressive and VA linear )
1 piece TÜV® parts certificate
<iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Product number:
1-INGRS
Complete wheel set Pirelli Scorpion A/T plus All Terrain 265/65R18 114T on Borbet CW7 alloy wheels
From
€2,582.00*
Complete wheelset Pirelli Scorpion A/T plus All Terrain 265/65R18 114T on Borbet CW7 alloy wheels
Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T:
Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges.
Performance: 40% off-road - 60% on-road
Tyre width: 265
Ratio of sidewall height to tyre width: 65%.
Rim diameter: 18
Load index: 114
Speed index: T
3PMSF Alpine symbol (so-called snowflake): yes
Tyre type: All-season
Tyre type: Radial
Noise emission: 73db
Noise class (from 1-quiet to 3-noise): B
Wet grip (grip on rain-soaked road): D
Fuel efficiency (A to G): D
Weight: 18.72kg
Tread Name: Scorpion A/T+
BORBET CW7 alloy wheel:
With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes.
Manufacturer: Borbet
Brand: CW7
Size/offset: 7.5x18", offset 47
Colour: either matt black or matt bronze
Suitability: for Ineos Grenadier
Certification: for 255/65R18 255/70R18 265/65R18 A01) K02)
Included in delivery: Rim, incl. matching wheel nuts
High wheel load
Winterproof
Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Product number:
PSAT-CW7BLK-4M
Complete wheel set Radar Renegade R/T + Mud Terrain 265/65R18 117Q on Borbet CW7 alloy wheels
From
€2,582.00*
Complete wheelset Radar Renegade R/T + Mud Terrain 265/65R18 117Q on Borbet CW7 alloy wheels
Premium off-road tyres Radar Renegade R/T+ 265/65 R18 117Q:
Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained in motorsport, countless victories in Lucas Oil races and TORC championships, flows into the production of these premium tyres.Off-road tyres for all the greatsRadar Renegade R/T+ 265/65 R18 117/114Q is a popular MUD Terrain tyre in a class of its own. Whether on sandy, rocky or muddy trails, or completely off-road. Also and especially recommended for racing. The tread design and the durable compound of the model Radar Renegade R/T+ 265/65 R18 117/114Q is especially suitable for off-road, SUV's and all 4x4 vehicles.
Performance: 60% off-road - 40% on-road
Tyre width: 265
Ratio of sidewall height to tyre width: 65%.
Rim diameter: 18
Load index: 117
Speed index: Q
M+S marking: yes
Weight: 22.94 per tyre
Tyre type: Radial
Tread Name: Renegade R/T+
PLEASE NOTE: This tyre is P.O.R. marked ("PROFESSIONAL OFF ROAD").The tyre does not have an M+S marking. It is therefore not approved for use in winter road conditions (according to §2 paragraph 3a sentence 1 and 2 of the StVO). We recommend the use of winter tyres in appropriate weather conditions. We will be happy to advise you on this.
BORBET CW7 Leichtmetallfelge:
Mit dem BORBET CW7 der Kategorie „Commercial Wheels“ präsentiert sich jetzt ein neues Rad, das nicht nur in puncto Design, sondern auch bei hohen Radlasten von bis zu 1.400 kg überzeugt.Das CW7 steht für eine neue prägnante Optik, die sich eben nicht nur über die Anzahl der Speichen definiert, sondern wie geschaffen ist für die echten Macher unter den Fahrzeugen. Vom Transporter über den Offroader bis zum Wohnmobil.
Hersteller: Borbet
Marke: CW7
Größe/Einpresstiefe: 7,5x18", ET 47
Farbe: wahlweise matt Schwarz oder matt Bronze
Eignung: für Ineos Grenadier
Gutachten: für 255/65R18 255/70R18 265/65R18 A01) K02)
Lieferumfang: Felge, inkl. passende Radmuttern
Hohe Radlast
winterfest
Lieferumfang: Felge, inkl. passende Radmuttern / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
Der Preis bezieht sich auf 4 bzw. 5 Kompletträder inkl. Montage und Wuchten. Bei diesem Artikel handelt es sich um Sperrgut.
Product number:
RADRENRT-CW7BLK-4M
Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels
From
€2,846.00*
Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels
BFGoodrich ALL Terrain T/A KO2 265/65 R18 117R:
The BFGoodrich All Terrain T/A KO2 265/65 R18 117R guarantees driving fun even off the paved roads. It is very stable and has good road grip. It also handles not too difficult terrain with some mud, loose ground well. For extreme terrain and little road use, however, a MUS tyre is recommended. In the AT range BFGoodrich is a very good choice.
A SPECIAL TYRE MIXTURE that is resistant to cuts and chipping on the sidewalls to withstand sharp stones. Designed to resist chipping and cracking caused by sharp stones and obstacles in the terrain. IMPRINTED CLAMPS on the sides for more grip and better sidewall protection. The large crampons on the sidewall are synonymous with bite, especially when the tyre is rolling at low pressure. Greater thickness of rubber on the sidewall protects the tyre from off-road hazards. STRENGTHENED CABLES for less sensitive sidewalls. Flank weakness can spoil off-road activities very quickly. Oversized sidewall cables give the carcass the protection it needs for tough off-road use.
Performance 50% off-road - 50% on-road
Tyre width 265
Ratio of sidewall height to tyre width in percent 65
Rim diameter: 18
Load index: 117/114
Speed index: R
3PMSF Alpine symbol (so-called snowflake): yes
M+S marking: yes
Weight: 23,06 per tyre
Tyre type: All-season
Tyre type: Radial
Noise emission: 74db
Noise class (from 1-quiet to 3-noise): 2
Wet grip (grip on rain-soaked road): B
Fuel efficiency (A to G): F
When ordering, please let us know whether the white lettering is to be fitted inside or outside.BORBET CW7 alloy wheelsWith the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes.
Manufacturer: Borbet
Brand: CW7
Size/offset: 7.5x18", offset 47
Colour: either matt black or matt bronze
Suitability: for Ineos Grenadier
Certification: for 255/65R18 255/70R18 265/65R18 A01) K02)
Included in delivery: Rim, incl. matching wheel nuts
High wheel load
Winterproof
Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Product number:
BFGATKO2-CW7BLK-4M
Complete wheel set, Cooper Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels
From
€2,686.00*
Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels
Weathermaster WSC 265/65R18 114T :
High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice.
Tyre Series: WeatherMaster WSC
Fuel efficiency: C (A to E)
Wet grip: C (A to E)
External rolling noise: 74dB
Vehicle type: 4x4/SUV
Tread pattern: directional
Tyre marking: Alpine symbol (3PMSF), M+S marking
Tyre width: 265mm
Height/width ratio: 65
Rim diameter: R18
Load index: 114 (max. load per tyre 1180kg)
Speed index: T (max. speed 190km/h)
Special features: studdable
BORBET CW7 alloy wheel:
With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street.
Manufacturer: Borbet
Brand: CW7
Size/offset: 7,5x18", offset 47
Colour: either matt black or matt bronze
Suitability: for Ineos Grenadier
Certification: for 255/65R18 255/70R18 265/65R18 A01) K02)
Included in delivery: Rim, incl. matching wheel nuts
High wheel load
Winterproof
Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Product number:
COPWEA-CW7BLK-4M
Borbet CW7 alloy wheel, 7.5x18 inch
From
€349.00*
BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design.
With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes.
Manufacturer: Borbet
Brand: CW7
Size/offset: 7.5x18", offset 47
Colour: either matt black or matt bronze
Suitability: for Ineos Grenadier
Certification: for 255/65R18 255/70R18 265/65R18 A01) K02)
Included in delivery: Rim, incl. matching wheel nuts
High wheel load
Winterproof
Scope of delivery: rim, incl. matching wheel nuts
Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
Product number:
CW7-75X18-BLKM
Rockslider for Ineos Grenadier, left and right side
From
€1,899.00*
The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.
Product number:
RSA4X4-GRENADIER-BLKM
Nakatanenga ventilation plates rear side windows - Ineos Grenadier
€119.00*
Ventilation plates rear side windows - Ineos Grenadier
Good air circulation as with slightly open windows and still no higher risk of rainwater penetration or theft than with closed windows? In addition protection from various insects?
That's possible: with our ventilation panels with mosquito net, exactly fitting for a variety of offroaders, made of aluminum - no rattling universal parts that "somehow" hold! For a discreet appearance, the aluminum made plates, which are supplied in pairs, are black powder coated.
Ideal not only for campers and dog owners, also to prevent heat buildup when parking in the blazing sun. In addition, the super easy installation: crank down the window, insert the ventilation plate, crank the window up, done!
Please note: At high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!
Length: 520 mm
<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Product number:
LBLH-GRENADIER
Nakatanenga sun visor organizer for Ineos Grenadier
€55.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
NASV-GREN-BLK
Weight:
0.2 kg
Sun visor organizer for Ineos Grenadier
With its classic boxy design – inspired by the old Defender, of course – the Ineos Grenadier is as spacious as can be. And there’s the catch, because it is very easy to lose track of all your small and important things in the Grenadier’s huge cockpit.
But now there’s an easy solution available: our practical organizer for the sun visor features a spacious zipper pocket, MOLLE and Velcro patches. All your essential vehicle documents, parking licenses, keys, pens, sunglasses and other small paraphernalia can be kept within easy reach at all times, without restricting your forward vision or driving attention in any way. Four sturdy Velcro straps guarantee a tight fit on the sun visor, even in rugged off-road terrain. The organizer is made of PU coated nylon 6.6 fabric and therefore extremely durable and easy to clean.
Available in black
Dimensions:
on the sun visor: 46.5 cm x 16.5 cm
open: 46.5 cm x 33 cm
Each organizer has to be ordered separately.