Vehicle accessories

Stainless steel screw set for Land Rover Defender 90 SW / 90 HT / 90 Softtop Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us. The screws' heads are identical to the original Defender screws!!! Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2 Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please  note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.

Reliable support for your vehicle door Rear Door Damper for Land Rover Defender 90/110, fitted to the  TOP of the rear door. Conversion kit, comes with stainless fittings, only for vehicles with rear door, suitable for all model years. The rear TOP door damper replaces the standard door arrester with a special gas strut with soft-stop function that keeps the door secuerly opened. The damper also works when fitted alongside our rear crossmember spare wheel carrier.

Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.

Lamp protection grille for fog light, reversing light Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)

Nakatanenga spare tire backpack If you are occasionally "out at home", be it offroading, survival adventures or expeditions, you know the feeling when dust, dirt and moisture slowly but surely penetrate into the innermost areas: into the sleeping bag, in the spare linen, in the food, in the tool. There, where you just want to have it dry and clean, because otherwise it quickly starts to gnaw on morality. The rule of thumb is therefore, no matter whether backpack, tent or 4x4: dirty things stay together, well packed and especially OUTSIDE. Our Nakatanenga spare tire backpack with about 47 l volume realizes this principle for your 4x4. Firewood, muddy slings, wet clothes or tarpaulins, garbage, game loot and much more are stored outside on the spare tire, on the tailgate or on the roll bar. This ensures that the interior of the car and the rest of the equipment are guaranteed to remain clean. If the additional storage space is no longer needed, the spare tire backpack is quickly cleaned, folded and packed away. The 47 l backpack developed according to US MIL-SPEC is attached non-slip with two straps. It is freely expandable by double-sided MOLLE, e.g. with our first aid kit. Trivia is best kept in the zip pocket on top and meshes at the bottom allow water and dirt to drain off quickly. The bag is made of sturdy polyamide 6.6 and is internally PU-coated, odorless and without plasticizer.The Medium spare wheel rucksack with a packing volume of approx. 47 l is ideal for tyres up to 37". If that's not enough, you can take a look at its big brother with 80 litres here. Delivery is without the illustrated accessories. Material: Polyamide 6.6 with PU coatingCapacity: about 47 litersDimensions: HxWxD appx. 525x425x210 mm

Installation box for AUTOTERM (=Planar) 2D parking heaters Our installation housing for the AUTOTERM (=Planar ) 2D parking heater can be mounted on the outside of loading areas or vans. Thanks to the sturdy material, you no longer need to worry about the parking heater being damaged by the load, for example. With this installation box, you save space in the vehicle and in the engine compartment and protect the parking heater at the same time!  The installation box is also suitable for Webasto Air Top 2000 and Eberspächer D2 parking heaters. Dimensions: 35x15x13 cm Scope of delivery: 2-piece installation box 4 screws, 4 washers Pre-assembled cable grommet  

ender flares TREKFINDER universal - 1 PIECE - 35 millimeters wide and 150 cm long - incl. TÜV® report inexpensive and flexible fender flares in very good quality indestructible and therefore durable fender flares made of black rubber ideal e.g. for track widening with wheels, spacers etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widening is 51 millimeters wide in total - of which approx. 16 millimeters are used for mounting and approx. 35 millimeters then protrude outwards to cover the tires SCOPE OF DELIVERY: 1 TREKFINDER mudguard extension 150 cm, including screws 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for 24 hours afterwards must be at least 20° Celsius the widener must be pressed evenly against the mounting surface with high pressure for approx. 1 minute after removing the 3M tape carrier film adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be followed, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended (fixing screws are included in the scope of delivery) The extensions are suitable for almost all vehicle types and vehicle models of all vehicle manufacturers, such as:Ineos Grenadier, Jeep, Land Rover, Ford, Nissan, Suzuki, Toyota and many others (cars, vans, off-roaders, construction machines, trailers, agricultural machinery, etc.).  

Practical nylon cargo net Can be fastened almost anywhere with tensioning buckles, size approx.: 150 x 100 cm. Made exclusively for us in Germany. Material thickness: 3mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black. 14 lashing points, 150 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Illustration similar Optional: set of 10 belt staples for mounting the net. The net is also available in other sizes on request.

Universal console for Defender For radio, radio set, additional instruments etc., piece - delivery without instruments or switches.

The Suzuki Jimny II is small, agile, and a true off-road cult classic. Want good air circulation like with slightly open windows, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made specifically for the Jimny II from sturdy aluminum, offer just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping trips and adventure excursions with small luggage. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Ventilation panels on the driver and passenger sides must not be used while driving! Material: Aluminum Suitable for: Suzuki Jimny II (GJ & HJ) <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  

Special offer bundle RAPTOR 4-Bottle Kit black or colourable -10% discount on the bottle kit including free spray gun   Unlike other coatings, the RAPTOR multi-purpose coating/paint does not need to be heated. It can simply be sprayed on and then cures. A mixture of 1 litre requires 50 ml of paint - 1 litre covers an area of approx. 4.2 m² - for application we recommend the standard RAPTOR spray gun (included in this bundle), the RAPTOR spray gun with adjustable spray nozzle for better texture adjustment or our roll-on set (application via paint roller). To prepare the substrate, we recommend We recommend the U-POL universal adhesion primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please observe the processing instructions in the instructions/data sheet. What is RAPTOR protective coating / varnish? The RAPTOR protective coating is a particularly robust polyurethane coating. This gives surfaces an efficient and durable protective coating that is ideal for demanding conditions. The RAPTOR coating has been developed to withstand almost any weather conditions. The reliable UV resistance prevents fading or bleaching - even after many years in the sun. It also offers the best protection against rust formation - thanks to the water-resistant surface!     Why choose the RAPTOR multi-purpose coating? + PROTECTION: The coating offers perfect UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to an ideal seal. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.     + UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.     + CHOICE OF COLOURS: The multi-purpose coating can be tinted to the colour of your choice or over-sprayed with different colours.   Scope of delivery: 4x 711 ml bottles of coating (selectable colour: black or clear-tintable) 946 ml hardener Standard RAPTOR spray gun   ONLY WHILE STOCKS LAST! 

Wind Deflector for Nakatanenga CargoBear 1.0 & 2.0 – Mercedes G-Class Enhance the aerodynamics and functionality of your CargoBear roof rack with this wind deflector, designed specifically for the Mercedes G-Class and compatible with both CargoBear 1.0 and 2.0 systems. Made from black, matte powder-coated aluminium, the deflector extends the rack by 10 cm at the front and improves airflow over the already low-profile system. Pre-drilled holes allow for easy and secure mounting of Osram SX180 lightbars, giving you more versatility for off-road or overland use. Material: Aluminium, black matte powder-coatedIncludes: Mounting hardwareExtension: Adds 10 cm to the front of the CargoBear rack   A smart upgrade for both performance and lighting integration.

Wind deflector suitable for Nakatanenga  CargoBear 2.0 Land Rover Defender Material: aluminium, black matt powder-coated Incl. Mounting material Suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.

Leather armrest for Land Rover Defender Our armrest for the doors of your Land Rover Defender 90/110/130 is just that bit of extra that adds a whole new level of comfort - even on long journeys. Finally you can rest your elbow comfortably, making driving so much more relaxing and safe. Our armrest is made of an intricate aluminium subframe which is covered by hand in naturally tanned leather (black). The rest is available either for left or right hand side doors or, with a saving, as a bundle for both doors. No drilling required. Please choose.

Wind deflector - suitable for Nakatanenga CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element Material: Aluminium, black matt powder-coated RAL 9005 incl. fixing material the wind deflector extends the CargoBear by 10 cm. lightbars or headlights can be mounted on the wind deflector. suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.  

Roof Accessories for NAVIS PickUp: Spoiler and Rail in Black   Roof rack NAVIS spoiler RAIL & FLAT PickUp roof rail Alu black:The spoiler reduces the wind noise and is suitable for all NAVIS roof racks. Roof rack railing for NAVIS FLAT PickUp roof rail aluminum black:The matching side rail for the roof rack NAVIS FLAT - suitable for all PickUp models.2 pieces (1x left and 1x right)Color: Black

Universal mudguard extensions from Trekfinder - incl. TÜV® report inexpensive and flexible mudguard extensions in very good quality indestructible and therefore durable mudguard extensions made of black rubber ideal e.g. for track widening with wheels, spacer discs etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widener is 39 millimetres wide in total - of which approx. 16 millimetres are used for mounting and approx. 23 millimetres then protrude outwards to cover the tyres SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, each 150 cm long, 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended

Changing door hinges - simple - quick - stress-free with the ejector tool for catch bolts With our specially developed ejector tool, the catch bolts of the Mercedes-Benz G-Class can be removed effortlessly - without any unnecessary effort.Problems often occur when replacing the door hinges: The original bolts are often worn out, bent or difficult to access. This is exactly where our tool comes in. It enables the bolts to be removed quickly and easily - precisely, efficiently and without damage.This makes replacing the hinges child's play.All hinges for the Mercedes Benz G-Class are available from us:  Door hinges (for 2- or 4-door)  Door hinges for rear door (1- or 2-leaf)  Hinges for bonnet  Window flap hinges

Warm Air Pass-Through for Vehicle Doors – Universal, Durable, Camping-Ready Want to direct warm air into your vehicle without leaving the door open? Our universal warm air pass-through for vehicle doors creates a practical opening for your air hose while noticeably reducing drafts and heat loss—ideal for camping, vanlife, or stationary use at a campsite.   Your advantages at a glance • Universal fit: suitable for almost all common vehicle doors (car, SUV, van, camper) • Durable tent fabric: lightweight, flexible, and designed for outdoor use • Two colors: Coyote or Reed Green – subtle, functional, and matching your setup   How it works The pass-through is hooked into the door frame area, the hose is guided through the opening, and the door is then closed. This keeps the interior better sealed while your system continues to reliably transport air.   Scope of delivery 1× Warm air pass-through for vehicle door   Recommended for stationary use only (not while driving).

Webasto Thermotop EVO5 mounting bracket Stainless steel bracket for mounting the Webasto Thermotop EVO5 water heater or AUTOTERM flow in the Land Rover Defender TD4 2.2 or 2.4. Existing mounting points are used to attach the parking heater, the required stainless steel mounting material is included with the parking heater bracket. Stainless steel and rust information sheet Important note: the mounting bracket only fits if the air intake in the engine compartment has been adapted (e.g. with our optimised air intake or our SN4 snorkel systems)    

Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.  Length 2 slats: 215mmLength 3 slats: 270mm The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)   If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)   Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Control unit for the Planar 2D This board can be used as a spare part or to convert heaters without height kit.  For vehicles with 12V on-board voltageSuitable for heaters from serial number: 5561 ..... Please note : This control unit features an updated algorithm for the temperature mode. This means that, in temperature mode, the heating switches off once it has reached the set temperature, rather than reducing the output as in the previous version.If you carry out the conversion yourself, the warranty and the warranty expire. We advise against an independent conversion!The return of an electronic component is not possible. Have it carried out in a certified specialist company. If you have any questions please contact us via email or phone. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

Protective grille for blinker, brake and parking lights Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)

Swivel stainless steel recovery point with stainless steel shackle for the highest demands. Designed for the OEM front bumper on the Land Rover Defender 90/110/130. This recovery point is an indispensable accessory for serious off-road enthusiasts and professional users who rely on maximum reliability and safety during recovery operations. Developed for demanding use, this swivel recovery point offers superior performance and durability. Robust Construction for Maximum Safety Made from high-quality stainless steel, the recovery point is characterized by its extreme robustness. The mounting adapter, the shackle, even the retaining ring are made of stainless steel. Rust is therefore a thing of the past here. The main structure is solidly bolted and designed for high loads. This massive construction ensures that the recovery point can withstand even the harshest conditions and high tensile forces. The careful workmanship and material selection guarantee a long service life, even with regular and intensive off-road use. Optimal Flexibility thanks to 360° Swivel Function A special feature of this recovery point is its 360° rotatable stainless steel shackle pin. This feature allows for the flexible attachment of recovery shackles or ropes from various angles without causing adverse lateral loads on the recovery point or vehicle structure. This is particularly advantageous in rough terrain, where the vehicle to be recovered is often not ideally positioned. The swivel function minimizes the risk of material fatigue and increases safety during the recovery process by ensuring optimal force transmission. Thoughtful Design - Additional Feature This swivel recovery point is not only functional but also thoughtfully designed. The edges of the recovery point are rounded, which ensures optimized pedestrian protection and minimizes the risk of injury. Rely on the swivel recovery point from Nakatanenga – your strong partner when it matters most.

Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Secure seat installation in the Defender The seat console corresponds to the Land Rover part number 349996. Measurements: 450x465 mmMaterial: Steel, black powder coated You can contact us by E-Mail or telephone, if you want the deluxe seat with back rest and head rest or the deluxe seat with the back rest only.

Tailgate Organiser – Tailgate organisation system for the Jeep Wrangler JK Whether you're going on an off-road tour or a camping trip, small items such as tyre repair kits, gloves or winch controls can be stored neatly in the Tailgate Organiser at the rear of the Wrangler. The MOLLE laser-cut system allows for flexible attachment options and ensures that everything stays in place – ready to hand at all times. The advantages of MOLLE Laser Cut: Lighter than sewn systems Quick attachment and removal of bags Particularly flat – no unwanted snagging Firm hold, no slipping You can find more information about MOLLE in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bags, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organiser base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.  

Tailgate Organiser – Tailgate organisation system for Suzuki Jimny 1+2 For anyone who drives a Suzuki Jeep: the Tailgate Organiser transforms the tailgate into a practical storage space for small items such as first aid kits, tools or outdoor gadgets. Thanks to the MOLLE laser-cut system, various bags can be attached flexibly – for tidiness and quick access. The advantages of MOLLE Laser Cut: Reduced weight thanks to less material Easy attachment and removal of bags Flat design, no snagging Firm and secure hold Further information on the MOLLE system can be found in the downloads. Scope of delivery: Suzuki Jimny up to model year 2018 FJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny 2 GJ/HJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Important note: On Suzuki Jimny models built from 2021 onwards (type GJ/HJ), the emergency release for the tailgate can no longer be used once the organiser has been fitted. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products.   Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.

The Tailgate Organiser – Universal tailgate organisation system Whether you're a camper, off-roader or everyday driver, the universal Tailgate Organiser allows you to make good use of the unused space on your tailgate. First aid kits, gloves, multimeters or repair kits: everything has its place in the MOLLE laser-cut pockets and is immediately accessible. Advantages of the MOLLE laser-cut system: Lighter than sewn versions Quick bag change (e.g. first aid) Flat and free of annoying snags Stable hold, no slipping You can find more detailed information about MOLLE in Documents. Scope of delivery: Universal 650x250 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 650x250 mmOptional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 740x350 mmOptional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.