Our LED licence plate light for Land Rover Defender 90/110/130 looks like the original item with all the benefits of LED technology: whiter and brighter than halogen bulbs little current drain (only 0.5 W), generates little heat insensitive to vibrations, especially interesting for diesel powered cars! superior longevity large voltage range - 9-33 V The light is E-marked for legal use (corresponding to ECE regulation no. 4). It's water and dustresistant to IP67 and is fitted using the existing M5 screws. All fittign material is supplied, so fitting only takes a few minutes.
Prices incl. VAT;
Convenient retrofitting Do you want to make reversing safer with your Landy? For all Defenders from 1998 onwards, our Y-cable adapter makes it very easy to install an additional reverse light. No extra cables or switches required. The two-pronged piggyback cable supplies both the original and the additional light with power. Once you shift into reverse, both lights will come on. All connection materials are included.
Prices incl. VAT;
Replacement switch for ignition lock The ignition lock switch can often cause problems. If it is defective, you will not be able to start the vehicle. Many people immediately replace the entire ignition switch, but if the ignition switch's turning mechanism is still working properly, it is much cheaper to replace the ignition switch located at the rear of the ignition switch. In this case, this item is the ideal replacement or repair part.
Prices incl. VAT;
Fits all MY - TDi, TD5, TD4 2.4, TD4 2.2 with original-bumper Full bolt kit for one bumper - stainless steel bolts for Defender 90/110/130, comes with assembly paste. Do not use in conjunction with a winch or clevis pin bumper!
Prices incl. VAT;
Rear axle spacers - 10 mm for Land Rover Defender These 10 mm spacers for the rear axle improve the track width and handling of your Land Rover Defender.Optionally suitable for Defender 90 or Defender 110/130, supplied in pairs. Registration is only possible by individual approval possible.Please select the appropriate wheelbase for your vehicle.
Prices incl. VAT;
Pilot bearing / Guide bearing for all Defender TD4 models (MY 2007-2016) We recommend replacing the pilot bearing when replacing the clutch.
Prices incl. VAT;
Bracket for double damper system - rear axle Maximum control, double damping: with this bracket for a double damper system on the rear axle, you can equip your vehicle for maximum loads and demanding off-road use. Supplied in pairs
Prices incl. VAT;
Land Rover Windscreen Wiper Arm Part for Defender 90/ 110/ 130 year of construction 2001-2016
Prices incl. VAT;
Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.
Prices incl. VAT;
Front floor mounting set, stainless steel for Land Rover Defender Stainless steel fastening set for floor panels in the front footwell, for Land Rover Defender Fastening set includes the parts for driver and passenger side.Ideal for Nakatanenga storage compartment footwell - Land Rover Defender.
Prices incl. VAT;
Impact wrench socket 1/2", long, 27mm Power socket for changing wheels on the Land Rover Defender.
Prices incl. VAT;
High-quality stainless steel brake pistons for Land Rover vehicles - 46.0 x 30.8 mm Stainless steel brake pistons 46.0 x 30.8 mm, for various Land Rover vehicles, please measure which brake pistons you need! The brake pistons are made of stainless steel and therefore do not rust. These are quality products manufactured for us in the EU, which have a significantly higher material hardness than cheaper products from other suppliers. Scope of delivery: 1 piece
Prices incl. VAT;
High-quality stainless steel brake pistons for Land Rover vehicles - 41.2 x 28.4 mm Stainless steel brake pistons 41.2 x 28.4 mm, for various Land Rover vehicles, please measure which brake pistons you need! The brake pistons are made of stainless steel and therefore no longer rust. These are quality products manufactured for us in the EU, which have a significantly higher material hardness than cheaper products from other suppliers. Scope of delivery: 1 piece
Prices incl. VAT;
Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.
Prices incl. VAT;
High-quality side bearing New side bearings are required when installing a differential lock (Detroit Locker or TrueTrac) if your vehicle has a P38 or Rover axle. Not required for the Salisbury axle. Please order this item twice. We obtain the side bearings from brand manufacturers such as Timken.
Prices incl. VAT;
Air scoop, for Land Rover Defender 90/110/130 right or left side, for adhesive, rivet or screw mounting. Material: steel, black
Prices incl. VAT;
Metal sleeve rubber mount for Koni Heavy Track RAID shock absorber 90-5375SP1 + 90-5471, top suitable for all years of construction! Scope of delivery: 1 piece
Prices incl. VAT;
Silencer / Spacer f. height compensation (P38 or Salisbury axle) Description: the item can be used on the rear axle on 110s and 130s. optimal possibility for level compensation/ the height adjustment is 10 millimetres the ring consists of a zinc, phosphated metal ring with coil spring centring and vulcanised NR/ SBR rubber the rubberised surface of the ring reduces the transmission of vibration noise the washer is placed between the spring end and the spring plate, max. one washer per spring end is possible, i.e. max. two washers per spring, i.e. max. 20 mm height increase per spring is possible price per unit
Prices incl. VAT;
Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece
Prices incl. VAT;
FLYWHEEL-LOCKING-TOOL This flywheel locking tool by LOF Clutches suits all Defender and Discovery TD5 models from 1998 – 2006, for both solid and dual mass flywheels. The tool locks the flywheel in place allowing the removal and torqueing of the TD5 flywheel bolts when changing the dual mass flywheel and the crank seal. A really handy bit of kit to keep in the toolbox.
Prices incl. VAT;
Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair
Prices incl. VAT;
Screw set bonnet Land Rover Defender optionally for Tdi /Td5 and for Td4 Defender bonnet screw set includes 2 front bumper screws, six stainless steel hinge screws with washers and nuts and two plastic hinge bushes The screws are supplied as Allen screws.
Prices incl. VAT;
Fitting Kit Headlight for Land Rover Defender, stainless steel Fitting kit for one headlight for Land Rover Defender, consisting of stainless steel screws and anti-seize paste.
Prices incl. VAT;
Correction wedges 3° for leaf spring axles - for optimising the axle geometry If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.
Prices incl. VAT;
High-quality seal for the ventilation flaps on Land Rover Series III and Land Rover Defender up to and including model year 2006 In contrast to the original parts made of foam rubber, this is a fully-fledged sealing material. The seals give way slightly over time. You can (re)glue them in with a PU adhesive. Scope of delivery: 1 piece
Prices incl. VAT;
Repair kit for tailgate hinges screwed version1 set, see pictureOnly suitable for hinges with screwed bolts.Does not fit hinges with pressed bolts.
Prices incl. VAT;
Bright, white light with minimal power consumption and a long service life - LED soffits make it possible! LED soffits for the Defender - Simple. Fast. Impressive. Do you love your Defender, but the interior lighting leaves a lot to be desired? With our new LED soffit, you can bring the latest lighting technology into your vehicle - and it's plug & play! The durable and vibration-resistant 39 mm LED soffit is a direct replacement for the bulb in the standard interior light(s) in the Land Rover Defender 90/110/130. Why an LED soffit? Our LED soffit has been designed to give you brighter, more efficient and stylish lighting. It's a perfect upgrade. Plug&Play - It couldn't be easier! No long installations, no tangled cables, no specialist knowledge required! Our LED soffit can be installed in just a few minutes. Simply remove the existing interior light, plug in the LED soffit and you're done. The plug & play system makes it possible - even for beginners. Advantages at a glance: Bright, uniform illumination: Thanks to state-of-the-art LED technology, the base centre provides pleasant, bright lighting in the interior.Daylight white; light colour 6000 KelvinVoltage: 12 V Energy-efficient: LEDs consume less power than conventional light bulbs, saving your Defender's battery. Durable: LEDs have a significantly longer service life and are resistant to vibrations and shocks. Easy installation: No workshop required - you can install the Soffitte yourself in just a few minutes.Ready to install - plug & play Who is the LED soffit suitable for? Our LED soffit is the perfect solution for all Defender fans. It is suitable for the Defender 90 as well as for the Defender 110 and 130. Please observe the polarity when installing! Scope of delivery: 1 piece
Prices incl. VAT;
Switchboard PROFI 2 for Cubbybox New control panel Cubbybox Land Rover Defender made of high quality aluminium with 3 Profi switches with green LED lighting, circuit breaker and voltmeter for independent testing of 2 different batteries, cigarette lighter with socket, rubber cover and fuse, 190 x 132 mm.
Prices incl. VAT;
Nakatanenga rim reinforcement for splash guard holder Edge reinforcement for splash guard holder, for Land Rover Defender 110.Dimensions of a single edge reinforcement: 10 x 2.3 cm. Supplied in pairs.
Prices incl. VAT;
Only the most hardened purists would welcome a return to the times before central locking. Let’s be honest, we’ve all become too spoiled. A Landy with central locking is better than one without. Our replacement case for the key fob is meant to replace the original one when the the buttons are faulty or the shell too worn out from use. Simply install the electronics from the original remote in the new key fob case and attach to your key ring. New programming is not required. Suitable for Land Rover Defender with separate remote control, incl battery CR2032. Except for remote controls with the following form:
Prices incl. VAT;
Replacement cup holder for Cubby Box. If your cup holder of your Cubby Box breaks, the cup holder is available as a spare part from us. 0.5 l drinks bottles and coffee cups fit perfectly into the practical cup holder. Also ideal for self-made center consoles.
Prices incl. VAT;
Where to go with all the little things in the vehicle? There is more storage space here! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle. The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, ballpoint pens, notepad, small flashlight, multitool etc. The organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Integrated zipped pocket and MOLLE loops. Width of the organizer is 290 mm. Material: 100% nylon The Nakatanenga sun visor organizer is available in different colors: green-brown coyote sand Universally applicable for all vehicles! You can find the Nakatanenga card holder here. You can find the matching mirror for the organizer here.
Prices incl. VAT;
Land Rover Defender accessories, Discovery and Range Rover Classic parts
The Defender has a soul, or so many say. And maybe they're right, because sometimes it really feels that way. It takes you anywhere, even to places where others would have given up long ago. In return it needs care, tools and patience. It rattles, makes noises and has never pretended to care much about perfection. But anyone who knows it understands: that's exactly its charm. There's hardly anything more satisfying than working on this piece of British engineering yourself – or, if the spanner slips, at least impressing with a bit of technical knowledge.
For everyone who prefers to wrench themselves or have things professionally fitted, the Nakatanenga shop is a treasure chest full of Defender accessories and Defender spare parts. You'll find everything needed to get the old Brit back into shape or turn it into a proper overland vehicle.
From bumpers to snorkels – the right Defender accessories for the road ahead
If you want to turn a Defender into a travel vehicle, you need more than good spirit and a full tank. A winch bumper, for example – not because you've bogged yourself down, of course, but purely to pull everyone else out. We recommend our Nakatanenga winch bumper for the Defender, available as a bundle with winches from Horntools or Superwinch, with or without auxiliary lights.
But there are moments when no prayer helps, only proper recovery gear. With recovery points, rear crossmember reinforcements and traction boards, you stay in control even when the ground decides to create its own adventure. Everything is robust, tested and ready for real-world off road use.
If you're planning long distances far from civilisation, it's best to upgrade with a 56-litre auxiliary tank or a 66-litre version, while the Defender underbody protection ensures sharp rocks, roots or curious boulders don't leave deeper marks. Rock sliders protect the sides. You'll find all of that in our protection category.
The Defender snorkel, or raised air intake, is essential for anyone heading into desert regions or water crossings – though even Hamburg puddles can look surprisingly deep. Available for Td4, Td5 and Tdi in different versions for Defenders with or without roll cages.
Defender suspension, wheels and tyres
No adventure without proper suspension. A Defender suspension kit isn't about taste, it depends on how you use the vehicle. Whether it's a 90, 110 or 130, there's a setup for every purpose – from a family daily driver to a fully loaded long-distance touring vehicle. For the right off road look, you can add steel wheels such as our classic ANR wheels, Wolf wheels or equally robust Dotz Dakar wheels.
If you don't want to search endlessly for a workshop that can balance Defender tyres properly, simply choose fully mounted wheel sets. Everything about wheels and tyres can be found here.
Interior with character – sports seats for the Defender
If you cover long distances, you should sit comfortably. With new seat foams you can preserve the original Defender seat charm, Defender sports seats add modern support on rough tracks, and matching seat covers protect the material or hide the scars of past expeditions. Classic style returns with the right Defender steering wheels.
And then there's the sort of Defender accessories that make you wonder why Land Rover never fitted them from the factory: leather door handles, a proper glove box, a sturdy A-pillar grab handle so getting in doesn't feel like a mini mountain climb every time.
Seat rail extensions – apparently British engineers didn't know tall legs. A two-colour interior light, a handy rear cubbybox tray and of course the rear door strut that stops the door from hitting your back when the Defender is on uneven ground.
Dual battery system, electrics and lighting – power where you need it
Whether it's a heater, laptop, fridge or phone, you need power on the road. That's why one of the first upgrades many Defenders receive is a dual battery system. Ours comes with a stainless steel bracket for two Banner 80Ah batteries, including wiring loom and split relay. You can add a battery monitor if desired. Perfectly matched with the bonnet solar panel for Td5 and Td4.
In the lighting section you'll find everything from 7-inch headlights and LED indicators to light bars from Osram and Vision-X, plus a matching lamp bracket. Reversing lights, interior lighting and a number plate light with camera are also part of the range.
Roof racks, storage and order in the chaos
The CargoBear roof rack for the Defender is almost too good-looking to load up. Flat, walkable, with pass-throughs and made for our Roof Lodge tents, mounted with a quick mount system that works with different roof tents. Perfect accessories for the Defender roof rack include our outdoor shower, the Nakatanenga Shower Tube, and the Roof Lodge Evolution 2 awnings. On top fit the Nakatanenga storage boxes and the large 198-litre aluminium box – enough room for tables, chairs and all the “just-in-case” bits.
For even more storage, there's the discreet wing box, side boxes, the valuables compartment for the cubbybox, or the footwell storage box. The tailgate organiser with MOLLE pouches brings order to the rear, the cargo net under the roof liner uses every inch, and the window guards with MOLLE system expand storage further.
Parking heater for the Defender
A parking heater transforms the Defender into a winter-ready travel vehicle, especially when neatly integrated with the cubbybox extension. If you want warm showers, add the Warmduscher kit. Alternatively, the mobile parking heater in an aluminium box also warms the roof tent – or the garden pavilion if needed.
Maintenance, repairs and Defender spare parts
After the trip is before the next one. Brakes, exhaust, prop shafts – anyone who knows where the dirt hides also knows where lubrication is needed. Our range includes all essential Defender spare parts, from wheel bearings and air filters to exhaust and gearbox parts, and even full body panels including galvanised chassis for Defender and Discovery. Whether it's a minor service or full restoration – everything a Land Rover Defender needs is here. Many parts also fit the Discovery I, Discovery II and Range Rover Classic. When unsure, just call our service hotline.
If you prefer leaving the work to professionals, our in-house workshop is ready. Specialised in Defenders, we handle everything from auxiliary tank installation or parking heaters to dual battery systems and differential locks. We also carry out full restoration projects and the overhaul of Defender gearboxes or engines.
Nakatanenga – your online shop for Defender accessories and spare parts
The Defender isn't a vehicle for perfectionists. It's a rolling adventure, a drivable project and a touch of madness on wheels – provided you have the right Defender accessories and Defender spare parts. But in return you get something no modern SUV offers: honest mechanics, real stories and the reassuring feeling that you can fix almost anything yourself if needed.
- Everything for Defender modifications, repairs or full restoration: At Nakatanenga you'll find Defender spare parts, body components and accessories – from practical to extraordinary.
- Don't want to work on your Defender yourself? Just call and book an appointment. Our workshop specialises in the British icon and handles everything from simple tyre changes to full Defender restorations.
- Looking for a Defender roof rack? One that sits low and looks seriously good? We say: the CargoBear is your answer.