Window well trim for Defender Available in the following versions:- Window well trim (pieces) front left or right, for all Defender 90/110 (for 1x left and 1x right, simply order 2 pieces).- Window well trim (piece) rear left, for all Defender 110/130- Window well trim (piece) rear right, for all Defender 110/130
Prices incl. VAT;
USB socket suitable for Land Rover switch openings - USB 3.0 The Land Rover USB socket fits into the factory switch openings on the Defender Td5 (2002-2006) & Tdci/Td4 (2007-2016). The Land Rover USB socket is designed to complement the original Land Rover switch design.To ensure your Defender dashboard maintains a factory appearance, the outlet is equipped with green backlighting. Each Land Rover USB comes with a mini harness to allow for easy two-wire installation.A multi-plug plugs directly into the back of the USB socket for easy removal. The included mini harness comes with a pre-wired inline fuse, so installation requires nothing more than the ignition supply and ground/earth connections. The Land Rover USB socket also fits into the openings in the Freelander 1, Discovery 2 & 'Soft-Dash' Classic Range Rover. Puma Pod II and all Puma double DIN console switch relocation panels are suitable. USB 3.0 Scope of delivery: 1pc USB socket1pcs Mounting Instructions Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;
Stainless steel bed strip for the Land Rover Defender 90 and 110 The loading area bar is made of corrosion-resistant stainless steel and replaces the corrosion-prone original loading area bar. Since the original screw heads occasionally tear off, the hole pattern is slightly offset. So new holes have to be drilled. The delivery includes stainless steel screws.
Prices incl. VAT;
Nakatanenga Connector Fuel Lines The factory installed connector plugs on the Land Rover Defender Td5 fuel system are fragile (especially on older vehicles) and often break off the first time they are disconnected. This tends to happen during the following operations: Fuel cooler installation/removal Fuel tank installation/removal Installing/removing the fuel pump General work on the fuel system Until now, the solution was to buy an expensive set of hoses. Now the Nakatanenga connecting plugs are available as an inexpensive alternative in a practical set of four. The plugs, turned for us from high-strength aluminium, are also much more stable than the original parts.
Prices incl. VAT;
Steering column lever repair kit - For precise steering and safe driving behavior With this high-quality repair kit for the pitman arm, you can get the steering of your Land Rover back on track. Ideal for worn or damaged pitman arms - the kit contains all the necessary components for a reliable repair. Suitable for: Land Rover Defender 90/110/130, Range Rover Classic, Discovery 1
Prices incl. VAT;
Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.
Prices incl. VAT;
Front left and right mud flaps for the Land Rover Defender This set consists of a pair of high-quality mud flaps for the front axle - suitable for the Land Rover Defender 90, 110 and 130 models from model years approx. 1987 to 2016.Made from flexible, robust rubber, the mud flaps offer reliable protection against splash water, mud and stone chips. They specifically protect the sides, doors and lower edge of the vehicle from dirt and damage - especially when driving off-road or in bad weather.In addition to improved protection, the use of mud flaps also helps to maintain the value of your Defender: By reducing moisture and dirt deposits, corrosion is effectively prevented. The reduced dirt ingress also makes vehicle maintenance considerably easier.The mud flaps are a cost-effective replacement for worn or damaged original parts - in solid quality and a perfect fit for the models mentioned.Mounting instructions:Suitable brackets are required for mounting, which are not included in the scope of delivery. You can find the appropriate brackets here.Care recommendation:Regular cleaning and checking for cracks or wear extend the service life of the mud flaps and maintain their protective effect.Scope of delivery: 1 pairDifferent variants, choose the version that suits you!
Prices incl. VAT;
Reliable LED parking light for Land Rover Defender - durable & certified This high-quality LED position light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the position light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Chequer plate bumper pads For Land Rover Defender, protects the bumper and provides a secure hold. Delivery in pairs, incl. rivets Material: Aluminium Material thickness: 2.5 mm base thickness / 4 mm incl chequer plate (quintet plate)
Prices incl. VAT;
LED parking light in white for Land Rover Defender - Signal light White LED parking light for Land Rover Defender, single.with E-approval mark and fittings Also have a look at our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round LED lamps. As a rule, the original drill holes can be used. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.
Prices incl. VAT;
LED tail light / brake light for Land Rover Defender, red E-markedPlease also see our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
LED signal lights Land Rover Defender up to MY2016: tail light / brake light, white LED brake light for Land Rover Defender in white, single.With E-mark.Suitable for Land Rover Defender up to MY2016If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round lights. As a rule, the original drill holes can then be used.Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover DefenderPlease note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights.Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Front floor mounting set, stainless steel for Land Rover Defender Stainless steel fastening set for floor panels in the front footwell, for Land Rover Defender Fastening set includes the parts for driver and passenger side.Ideal for Nakatanenga storage compartment footwell - Land Rover Defender. You can find the right mounting kit here for securing the floor panels in the footwell of the second row of seats.
Prices incl. VAT;
Spare parts set for clutch pedal - Defender Practical spare parts set for the clutch pedal of your Land Rover Defender. Contains two bushes and a bearing - ideal as a replacement for worn clutch spring components. Precisely fitting and durable for reliable pedal function.Spare parts for clutch spring, set consisting of: 2x bushing and 1x bearing
Prices incl. VAT;
Replacement filter for diesel replacement pump For Land Rover Defender.Replacement filter for our replacement diesel pump, original Mann quality filter.
Prices incl. VAT;
Our LED licence plate light for Land Rover Defender 90/110/130 looks like the original item with all the benefits of LED technology: whiter and brighter than halogen bulbs little current drain (only 0.5 W), generates little heat insensitive to vibrations, especially interesting for diesel powered cars! superior longevity large voltage range - 9-33 V The light is E-marked for legal use (corresponding to ECE regulation no. 4). It's water and dustresistant to IP67 and is fitted using the existing M5 screws. All fittign material is supplied, so fitting only takes a few minutes.
Prices incl. VAT;
High-strength turbo charger to manifold sealing gasket for Land Rover Defender Td4 / Tdci / Puma - special alloy.
Prices incl. VAT;
High-quality light switch for Land Rover Defender Td5/Td4 Discover our high-quality light switch for the Land Rover Defender Td5/Td4. This suitable replacement is compatible with all models from VIN VA104806 to EA999999 and ensures reliable lighting control in your vehicle. Perfectly matched to your Defender, the switch offers easy installation and long-lasting quality. Rely on our solution to maintain and improve the functionality of your vehicle.
Prices incl. VAT;
Sun visor mirror for Land Rover Defender The self-adhesive make-up mirror for the standard sun visor of the Land Rover Defender 90/110/130 can be mounted on two different places of the sun visor - see pictures.The mirror is available for either the left or right side of the vehicle and is sold individually. Supplied without sun visor.
Prices incl. VAT;
Land Rover Defender Glazing Rubber - Windscreen Gasket LR056278 A replacement rubber seal for the windscreen glazing. High quality spare part - Fits models MY 1987-2016 Windscreen, green tinted and heated for Defender up to MY 2016 you will find HERE in our Shop Windscreen, green tinted for all Defender 90/110 you will find HERE in our Shop
Prices incl. VAT;
Rubber protective cap for tie rod end Suitable for: Series I, Series II, Series III, Defender 90, Defender 110, Discovery 1, Range Rover Classic Land Rover Comparison Numbers:RTC5869QHRTC5868DRTC5870QH This PU version has better chemical and mechanical resistance than the conventional rubber dust cap.The service life is thus significantly increased by the material used.
Prices incl. VAT;
Replacement switch for ignition lock The ignition lock switch can often cause problems. If it is defective, you will not be able to start the vehicle. Many people immediately replace the entire ignition switch, but if the ignition switch's turning mechanism is still working properly, it is much cheaper to replace the ignition switch located at the rear of the ignition switch. In this case, this item is the ideal replacement or repair part.
Prices incl. VAT;
Convenient retrofitting Do you want to make reversing safer with your Landy? For all Defenders from 1998 onwards, our Y-cable adapter makes it very easy to install an additional reverse light. No extra cables or switches required. The two-pronged piggyback cable supplies both the original and the additional light with power. Once you shift into reverse, both lights will come on. All connection materials are included.
Prices incl. VAT;
Fits all MY - TDi, TD5, TD4 2.4, TD4 2.2 with original-bumper Full bolt kit for one bumper - stainless steel bolts for Defender 90/110/130, comes with assembly paste. Do not use in conjunction with a winch or clevis pin bumper!
Prices incl. VAT;
Rear axle spacers - 10 mm for Land Rover Defender These 10 mm spacers for the rear axle improve the track width and handling of your Land Rover Defender.Optionally suitable for Defender 90 or Defender 110/130, supplied in pairs. Registration is only possible by individual approval possible.Please select the appropriate wheelbase for your vehicle.
Prices incl. VAT;
Pilot bearing / Guide bearing for all Defender TD4 models (MY 2007-2016) We recommend replacing the pilot bearing when replacing the clutch.
Prices incl. VAT;
Bracket for double damper system - rear axle Maximum control, double damping: with this bracket for a double damper system on the rear axle, you can equip your vehicle for maximum loads and demanding off-road use. Supplied in pairs
Prices incl. VAT;
Land Rover Windscreen Wiper Arm Part for Defender 90/ 110/ 130 year of construction 2001-2016
Prices incl. VAT;
Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.
Prices incl. VAT;
Impact wrench socket 1/2", long, 27mm Power socket for changing wheels on the Land Rover Defender.
Prices incl. VAT;
High-quality stainless steel brake pistons for Land Rover vehicles - 46.0 x 30.8 mm Stainless steel brake pistons 46.0 x 30.8 mm, for various Land Rover vehicles, please measure which brake pistons you need! The brake pistons are made of stainless steel and therefore do not rust. These are quality products manufactured for us in the EU, which have a significantly higher material hardness than cheaper products from other suppliers. Scope of delivery: 1 piece
Prices incl. VAT;
Land Rover Defender accessories, Discovery and Range Rover Classic parts
The Defender has a soul, or so many say. And maybe they're right, because sometimes it really feels that way. It takes you anywhere, even to places where others would have given up long ago. In return it needs care, tools and patience. It rattles, makes noises and has never pretended to care much about perfection. But anyone who knows it understands: that's exactly its charm. There's hardly anything more satisfying than working on this piece of British engineering yourself – or, if the spanner slips, at least impressing with a bit of technical knowledge.
For everyone who prefers to wrench themselves or have things professionally fitted, the Nakatanenga shop is a treasure chest full of Defender accessories and Defender spare parts. You'll find everything needed to get the old Brit back into shape or turn it into a proper overland vehicle.
From bumpers to snorkels – the right Defender accessories for the road ahead
If you want to turn a Defender into a travel vehicle, you need more than good spirit and a full tank. A winch bumper, for example – not because you've bogged yourself down, of course, but purely to pull everyone else out. We recommend our Nakatanenga winch bumper for the Defender, available as a bundle with winches from Horntools or Superwinch, with or without auxiliary lights.
But there are moments when no prayer helps, only proper recovery gear. With recovery points, rear crossmember reinforcements and traction boards, you stay in control even when the ground decides to create its own adventure. Everything is robust, tested and ready for real-world off road use.
If you're planning long distances far from civilisation, it's best to upgrade with a 56-litre auxiliary tank or a 66-litre version, while the Defender underbody protection ensures sharp rocks, roots or curious boulders don't leave deeper marks. Rock sliders protect the sides. You'll find all of that in our protection category.
The Defender snorkel, or raised air intake, is essential for anyone heading into desert regions or water crossings – though even Hamburg puddles can look surprisingly deep. Available for Td4, Td5 and Tdi in different versions for Defenders with or without roll cages.
Defender suspension, wheels and tyres
No adventure without proper suspension. A Defender suspension kit isn't about taste, it depends on how you use the vehicle. Whether it's a 90, 110 or 130, there's a setup for every purpose – from a family daily driver to a fully loaded long-distance touring vehicle. For the right off road look, you can add steel wheels such as our classic ANR wheels, Wolf wheels or equally robust Dotz Dakar wheels.
If you don't want to search endlessly for a workshop that can balance Defender tyres properly, simply choose fully mounted wheel sets. Everything about wheels and tyres can be found here.
Interior with character – sports seats for the Defender
If you cover long distances, you should sit comfortably. With new seat foams you can preserve the original Defender seat charm, Defender sports seats add modern support on rough tracks, and matching seat covers protect the material or hide the scars of past expeditions. Classic style returns with the right Defender steering wheels.
And then there's the sort of Defender accessories that make you wonder why Land Rover never fitted them from the factory: leather door handles, a proper glove box, a sturdy A-pillar grab handle so getting in doesn't feel like a mini mountain climb every time.
Seat rail extensions – apparently British engineers didn't know tall legs. A two-colour interior light, a handy rear cubbybox tray and of course the rear door strut that stops the door from hitting your back when the Defender is on uneven ground.
Dual battery system, electrics and lighting – power where you need it
Whether it's a heater, laptop, fridge or phone, you need power on the road. That's why one of the first upgrades many Defenders receive is a dual battery system. Ours comes with a stainless steel bracket for two Banner 80Ah batteries, including wiring loom and split relay. You can add a battery monitor if desired. Perfectly matched with the bonnet solar panel for Td5 and Td4.
In the lighting section you'll find everything from 7-inch headlights and LED indicators to light bars from Osram and Vision-X, plus a matching lamp bracket. Reversing lights, interior lighting and a number plate light with camera are also part of the range.
Roof racks, storage and order in the chaos
The CargoBear roof rack for the Defender is almost too good-looking to load up. Flat, walkable, with pass-throughs and made for our Roof Lodge tents, mounted with a quick mount system that works with different roof tents. Perfect accessories for the Defender roof rack include our outdoor shower, the Nakatanenga Shower Tube, and the Roof Lodge Evolution 2 awnings. On top fit the Nakatanenga storage boxes and the large 198-litre aluminium box – enough room for tables, chairs and all the “just-in-case” bits.
For even more storage, there's the discreet wing box, side boxes, the valuables compartment for the cubbybox, or the footwell storage box. The tailgate organiser with MOLLE pouches brings order to the rear, the cargo net under the roof liner uses every inch, and the window guards with MOLLE system expand storage further.
Parking heater for the Defender
A parking heater transforms the Defender into a winter-ready travel vehicle, especially when neatly integrated with the cubbybox extension. If you want warm showers, add the Warmduscher kit. Alternatively, the mobile parking heater in an aluminium box also warms the roof tent – or the garden pavilion if needed.
Maintenance, repairs and Defender spare parts
After the trip is before the next one. Brakes, exhaust, prop shafts – anyone who knows where the dirt hides also knows where lubrication is needed. Our range includes all essential Defender spare parts, from wheel bearings and air filters to exhaust and gearbox parts, and even full body panels including galvanised chassis for Defender and Discovery. Whether it's a minor service or full restoration – everything a Land Rover Defender needs is here. Many parts also fit the Discovery I, Discovery II and Range Rover Classic. When unsure, just call our service hotline.
If you prefer leaving the work to professionals, our in-house workshop is ready. Specialised in Defenders, we handle everything from auxiliary tank installation or parking heaters to dual battery systems and differential locks. We also carry out full restoration projects and the overhaul of Defender gearboxes or engines.
Nakatanenga – your online shop for Defender accessories and spare parts
The Defender isn't a vehicle for perfectionists. It's a rolling adventure, a drivable project and a touch of madness on wheels – provided you have the right Defender accessories and Defender spare parts. But in return you get something no modern SUV offers: honest mechanics, real stories and the reassuring feeling that you can fix almost anything yourself if needed.
- Everything for Defender modifications, repairs or full restoration: At Nakatanenga you'll find Defender spare parts, body components and accessories – from practical to extraordinary.
- Don't want to work on your Defender yourself? Just call and book an appointment. Our workshop specialises in the British icon and handles everything from simple tyre changes to full Defender restorations.
- Looking for a Defender roof rack? One that sits low and looks seriously good? We say: the CargoBear is your answer.
