Vehicle accessories
Clamp steering wheel lock / ignition lock
Ignition Switch Clamp – Land Rover Defender (MY 1986–2007) High-quality clamp for secure mounting of the ignition switch to the steering column. Fits all Defender models from 1986 to 2007, including TD4. A reliable replacement – built to withstand even tough off-road conditions.You can also find the steering column lock with three door lock cylinders or the matching shear bolt to match the clamp in the shop
Prices incl. VAT;
Cable winch kit
Cable winch bundle 3-piece - Robust. Safe. Complete Our 3-piece cable winch bundle is the ideal solution for anyone who prioritises quality and reliability. Perfectly matched and ready for immediate use - whether off-road, in the workshop or in the forest. Included in the set: Steel cable - Heavy-duty cable with high tensile force, abrasion-resistant and durable - approx. 8mm cross-section and approx. 25m Pulley window - Guides the rope gently and prevents damage caused by friction Winch hook - Solid hook with safety catch for reliable work Suitable for most winches Quick assembly Maximum safety and control when pulling and recovering Picture similar!
Prices incl. VAT;
Mounting bracket Webasto Thermotop EVO5
Webasto Thermotop EVO5 mounting bracket Stainless steel bracket for mounting the Webasto Thermotop EVO5 water heater or AUTOTERM flow in the Land Rover Defender TD4 2.2 or 2.4. Existing mounting points are used to attach the parking heater, the required stainless steel mounting material is included with the parking heater bracket. Stainless steel and rust information sheet Important note: the mounting bracket only fits if the air intake in the engine compartment has been adapted (e.g. with our optimised air intake or our SN4 snorkel systems)
Prices incl. VAT;
AUTOTERM- Side entry Fi 24mm with outlet bend
Side entry Fi 24mm with outlet bend for AUTOTERM (=Planar) parking heater Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm Exhaust system 24mm - exhaust system for the following parking heaters: Autoterm Air 2D (formerly Planar 2D) Autoterm Air 4D (formerly Planar 44D) Autoterm Flow 5D (formerly Binar 5S D) Autoterm Flow 5B (formerly Binar 5S) Please note: When installing the parking heater, you must observe the general wading depth of the vehicle. Depending on the placement of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!
Prices incl. VAT;
Tow ball 3,5t lowered, incl. 2x 2-hole to 1x 4-hole-adapter
Ball head 3.5 t incl. adapter plate 2- to 4-hole - with E-mark & mounting material Swan neck tow ball 3,5t incl. adapter plate with adaptation from 2x 2-hole to 1x 4-hole mounting; especially compatible with simultaneous use of a hook type coupling Tow ball and Adapter plate both with E-mark! Mounting material is included (adapterplate with screw kit). The adapter is included. You can choose between two different tow balls:1. Swan neck tow ball for a lowering from 34 mm to 90 mm2. Swan neck tow ball extra low, for a lowering from 104 mm to 160 mm Please choose between the different tow balls and therefore different lowerings. Technical specifications:D value: 17.5 kNS-value: 150 kg nose weight
Prices incl. VAT;
Air intake Bravo Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018
Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018 The snorkel not only enables safe passage through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Prices incl. VAT;
Installation flange air heater for floors up to 83mm
Installation flange air heater for floors up to 83mm NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!This flange allows the installation of an air heater in floors or walls with a wall thickness of up to 83 mm.While an air heater is normally only suitable for installation in thin sheet metal walls or floors, this flange can also be used with an insulated floor construction with a wooden panel or directly a sandwich panel up to 83 mm thick. There is no need to scribe and drill the many different holes for combustion air, flue gas, fuel line and fixings - these are already integrated in the flange and allow the heater to be mounted directly in any direction. Only a rectangular cut-out of approx. 88x130 mm is required.Procedure: Find a suitable flat installation location with max. 85 mm total thickness (e.g. floor panel+insulation+wood panel). Cut a rectangular cut-out 88x130 mm. Insert the installation flange with sealing compound and screw it in place. Insert heater from the inside into the flange and mount all hoses etc. from the outside.Stainless steel, laser-cut, welded, partially glass-bead blasted.Suitable for Autoterm air heaters 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and possibly Webasto.
Prices incl. VAT;
Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioner
Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winchWinch cover Roller rope window cover
Prices incl. VAT;
Jackall service kit for Jackall
Everything you need for maintenance: With the service kit, you can get your Jackall jack back into top shape - for reliable operation and maximum service life. Contains all the necessary wear parts for easy maintenance.
Prices incl. VAT;
VIAIR tyre inflator gun with integrated deflation valve
VIAIR tyre inflator gun with integrated bleed valve Reads pressure up to 200 PSI and 14 BAR. This useful tool has a normally closed air chuck that can be opened by pressing the lever on the tyre inflator gun. Since the air chuck is normally closed, the tyre inflator gun is a perfect complement to on-board air systems and VIAIR's line of automatic shut-off portable compressors.Please note: Only compatible with VIAR portable compressors with automatic shut-off.- Integrated bleed valve for pressure regulation.- Air chuck with locking lever- 1/4″ quick connector- Closed release valve
Prices incl. VAT;
Adjustale Height - Dixon-Bate with Quickrelease system
Maximum flexibility: Dixon-Bate height adjustment with integrated changing system The Dixon-Bate quick release allows for a quick switch between ballheads, while at the same time being height adjustable either up to 150 mm or up to 200 mm. Thanks to the Dixon-Bate system everything with a 90x45 mm hole pattern can be mounted, in various heights, behind your car, regardless of whether it's a ball head or something else. Details:Hole Pattern: 90x45 mm M16 S Value: 350 kg D Value: 23.41 kN max. Towing Capacity: 3.500 kg Thanks to the E-certificate, in Germany, this part can be added to your car without having to go through the TÜV. The quick release system is especially useful when using the Land Rover towing hitch step. The product ships including the needed hardware and an instruction manual. Please select one of the options from the drop-down menu.
Prices incl. VAT;
Nakatanenga spare wheel carrier Defender Pickup / Softtop, until MY2016
Nakatanenga Spare Wheel Carrier Defender Pickup / Softtop, until MY2016 To preserve the original Defender look and to make room on the inside we adjusted our classic spare wheel carrier for the pic-up version of the defender (Attention: there is a separate version available for the classic hardtop). The carrier is independent from the rear gate, we eliminated any noise and made it from stainless steel. The carrier is thoroughly tested, e.g. on the "Grand Erg" Rally. It was designed to ease the installation while guaranteeing usability and resilience. In 2014 we further improved the design and started manufacturing entirely from stainless steel. The bearing does not require service, the entire carrier is corrosion resistant and can be removed just as easily as installed if needed. This wheel mount is compatible with the additional step and with the hitch from Land Rover, as well as our rear bumpers The carrier can easily be mounted yourself alternatively we also offer an installation service. Simply add the service flat rate to your cart and we'll contact you to confirm your appointment. The carrier does not swing open by itself, secondary unlocking to the gate is necessary. The carrier is also available in black or can be painted matching to your vehicle. Attention: This mount would also work on a Stationwagon. BUT: the carrier always needs to be opened separately from the outside and does not stay opened (on the pickup this is secured by the gate). It can not be opened from the inside, hence using the third row of seats would no longer be possible, since there is no emergency exit. This emergency exit is also required for campers. The spare wheel carrier is designed and tested for a total weight (spare wheel and possibly other accessories) of 120 kg. Suitable for vehicles up to MY2016
Prices incl. VAT;
Installation box for AUTOTERM (=Planar) 2D parking heaters
Installation box for AUTOTERM (=Planar) 2D parking heaters Our installation housing for the AUTOTERM (=Planar ) 2D parking heater can be mounted on the outside of loading areas or vans. Thanks to the sturdy material, you no longer need to worry about the parking heater being damaged by the load, for example. With this installation box, you save space in the vehicle and in the engine compartment and protect the parking heater at the same time! The installation box is also suitable for Webasto Air Top 2000 and Eberspächer D2 parking heaters. Dimensions: 35x15x13 cm Scope of delivery: 2-piece installation box 4 screws, 4 washers Pre-assembled cable grommet
Prices incl. VAT;
Relay box, waterproof, universal, 12V
WATERTIGHT RELAY BOX for winches with series wound motors. (3x positive cable, 1x earth) Protection class IP56k = protection against strong jets of water under increased pressure (flooding) Loadable up to 600 amps continuous load and therefore sufficient for all winches up to approx. 5.5 to pulling force.Very compact design.12 volts
Prices incl. VAT;
Nakatanenga winch bundle, with Tigershark 9.5 or 11.5 winch, incl accessories
Nakatanenga winch bundle Tigershark 9.5 or 11.5 for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch Tiger Shark 11500 / 9500 has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 11.5 / 9.5 electric winch has waterproof sealed relays for high electrical currents, allowing longer duty cycles.It is used for commercial recovery of rolling loads. Technical data of the Tigershark 9.5 winch: Rope speed: 5.7 - 1.2 [m/min].Pulling force: 4.3 tVoltage: 12 VWeight: 41 kgPower consumption at full load: 340 A Technical data of the Tigershark 11.5 winch: Rope speed: 5.7 - 0.6 [m/min].Pulling force: 5.2 tVoltage: 12 VWeight: 42 kgPower consumption at full load: 410 A The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Bundle consisting of: 1x cable winch Tigershark 9.5 or 11.5 - please select the appropriate version1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.
Prices incl. VAT;
Dropside bushing 24mm for exhaust gas of AUTOTERM (=Planar) parking heater, with screw holes
Dropside bushing 24mm for exhaust of AUTOTERM (=Planar) parking heater, with screw holes Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm (AUTOTERM Luft 2D / 4 D = Planar 2D, 4D, 44D).There is the version with screw holes as well as the version with stud bolts where no screws are visible from the outside. The variant with stud bolts is particularly suitable for a wall thickness of up to 15 mm.If the wall thickness is thicker, the version with screw holes should be used. Please note:When installing the parking heater, you must take into account the general wading depth of the vehicle. Depending on the position of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!
Prices incl. VAT;
VIAIR TLC Plus Automatic - Mobile Compressor 12V
TLC PLUS Automatic Portable Compresso rP/N 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag RECOMMENDED COMPONENTS 1.8m Portable Compressor Air Extension Hose BICYCLE TYRE INFLATION RATES: ROAD GRAVEL/HYBRID MOUNTAIN 0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar 0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar 0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar 25mm 10 sec. 18 sec. 35mm 6 sec. 13 sec. 2.0″ 11 sec. 22 sec. 28mm 13 sec. 21 sec. 38mm 7 sec. 15 sec. 2.3″ 14 sec. 26 sec. 30mm 16 sec. 25 sec. 42mm 8 sec. 17 sec. 2.6″ 16 sec. 30 sec. 32mm 18 sec. K.A. 45mm 9 sec. 19 sec. 3.0″ 18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 90P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 90P does not work with the VIAIR Winterization Kit.
Prices incl. VAT;
Nakatanenga trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.
Prices incl. VAT;
Towinghitch for standardized US Hitch-Mounts (2"/51mm Squared) up to 3.5
Trailer coupling up to 3.5t for 2" / 50mm multimount square mount This removable ballhead hitch (2"/51 mm Vierkant) fits most US hitch receivers, e.g. Jeep Wrangler. The hitch is e-certified and can tow up to 3.5 t. The shipment does not include any wirering. Details:Towing capacity: 3,500 kgD-Value: 14.0 kNEC-Certificate Number: e20*94/20*0517*00Material: SteelReceiver: 50 x 50 mm Square / 2" Multimount-System Scope of Delivery: Adapter 2" Ballhead Safety Pin Please choose the desired lowering.
Prices incl. VAT;
Horntools Alpha 9.5 winch, 4300kg traction, 12V
The Horntools Alpha 9.5 With its low weight and compact dimensions, it is perfect for vehicles with a total weight of up to 3.5 tons. Especially for touring vehicles that are fully equipped, the winch should not have too much weight, but still have to do great things. Furnishing: 9.2 mm Ø galvanized steel cable with 26 m length with hook INFO: steel cable is included separately in the scope of delivery stainless steel roller rope window remote control 1x cable potted reinforced relay (contactor) waterproof motor IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) freewheel lever * gear neutral position made of stainless steel cross braces made of stainless steel reinforced rope drum ** (suitable for use with plastic rope) powder-coated aluminum die-cast housing, motor / gearbox reinforced contactor housing made of deep-drawn sheet metal, powder-coated internal drum brake with 3 brake shoes cable length: 1.4 m cable cross section: 35 mm² 3-year warranty - this warranty exists independently of the existing gratuitous statutory rights for defects. The statutory rights in respect of defects are not restricted by this guarantee. Operating instructions * A freewheel lever is used to decouple the gearbox to quickly unwind the winch by hand. Technical specifications: working range voltage: 10-16 Volt max. Power consumption 365 Amp ** train speed free of load 7m / minute traction 4,300 kg ** 3-stage planetary gear 230: 1 geared down gross weight: 40 kg net weight: 32.3 kg weight with steel cable and roller cable window: 37.5kg Series wound motor * drum (ØxLength): 63 x 226 mm overall size (LxWxH): 577 x 160 x 225mm * Series motor with an electrically generated magnetic field** Values can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage.
Prices incl. VAT;
Glow plug Spark plug for AUTOTERM (Planar) 2D12 parking heater
For reliable ignition of your parking heater Glow plug as a spare part for AUTOTERM Planar 2D12 parking heater.
Prices incl. VAT;
Jacks Bundles - jack, transport lock and protective cover
Complete set: jack with accessories Car jack Bundle consisting of jack, yellow transport protection and protective cover. You can choose the bundle with different jacks: JackAll Jack, 60 inches / 152 cm JackAll jack, 48 inches / 122 cm
Prices incl. VAT;
Towbar with height adjustment 3.5t with E-mark for Defender TD5 / TD4 90 incl. E-set 7
If your Landy is not just a Chelsea tractor and regularly has to tow more than one kind of trailer, the odds are you will need an adjustable tow hitch. The first advantage over a static solution, of course, is the fact that you can adjust the height very easily just by moving slider and pin. Secondly, and more conveniently, you can also permanently mount several different tow systems to a number of slider plates. That means switching coupling types like tow ball, jaw or NATO is literally a matter of seconds. Pull the pin out, switch the slider plate, push the pin back in. Done. No screws, no nuts or bolts to fasten. The adjustable tow hitch is available for TD5/TD4 90, 110 and 110/130 high capacity pickup and comes as a complete assembly kit with the necessary chassis struts, the bracket for the rear cross member, mounts for electrics, slider frame, slider plate with tow ball, a choice of 7- or 13-pin electric coupling and all necessary fastening materials. Most importantly: the assembly kit is certified by an attached E-number (E11 for UK as country of origin) and that means the parts are road legal and you are not obliged to get additional certification or separate technical approval as may be required otherwise in your respective country. The number with the capital “E” stands for a general type approval within the ECE treaty. This includes the EU, the EEC, USA, Canada, Australia, Japan and many other countries worldwide. To be on the safe side in traffic stops, however, it is advisable to have the E-number on the part well visible and the part documents should preferably be with your registration papers in the vehicle.
Prices incl. VAT;
Speedometer calibration kit for Suzuki Jimny II GJ und HJ (default: 106%)
Speedometer calibration kit for Suzuki Jimny from 2018 (Type GJ und HJ) This tachometer calibration kit can be used to correct the speed display and distance counter for vehicle conversions with a tire roll circumference that differs significantly from the series.Changes to the differential or larger tire roll circumference can thus be made acceptable.The ABS / ESP control unit sends a speed signal to the instrument cluster via CAN bus. The speedometer calibration kit is installed in front of the instrument cluster and corrects both the speed signal and the odometer in real time. The correction factor can be programmed via USB interface. The original wheel speed signals are retained. The function of the ABS / ESP control unit can therefore not be impaired. Technical specifications:EC type approval: E1 10R-036407Correction factor: 1-255%Default: 106%Power supply: 6-30V DCPower consumption sleep mode: 10 mACurrent consumption max .: 35 mATemperature range: -40 ° C / + 125 ° CDegree of protection: IP68 Also available for other vehicles on request.
Prices incl. VAT;
Nakatanenga antenna holder bumper
Perfect mounting on the vehicle - antenna holder for the bumper The Nakatanenga antenna holder allows easy mounting of an antenna on the OEM bumper of the Land Rover Defender 90/110/130, making it easy to attach a CB or amateur radio antenna. The holder is made of stainless steel.
Prices incl. VAT;
VIAIR Air Source Relocation Kit
VIAIR Air Connection Extension 5 Piece Kit Features: 1/4″ NPT (F) Quick Connect Coupler 1/4″ NPT (F) Quick Connect Stud (2) 1/4″ NPT Compression Fittings (For 1/4″ Line) 15 ft. Air Line Tubing 3 Air Line Clips 5″ Continuous Grommet
Prices incl. VAT;
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
TREKFINDER complete protection for Suzuki Jimny II (GJ/HJ) - 5 parts, full safety suitable for all Jimny models of the type GJ built from the end of 2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel
Prices incl. VAT;
Bulkhead for Land Rover Defender, material: Stainless steel
No more rust: replacement bulkhead for Td5 and 300 Tdi The bulkhead is pretty much the most complex body part in a Landy – and one of the most vulnerable components, too. For one, it’s sporting many edges, corners, folds, curves and rivet connections and requires a considerable number of screw holes: to the frame, to the connections in the engine bay and to the windshield. Add to that a whole bunch of openings for steering, pedals, air and electrics and you see the problem. All this structural complexity combined with its positioning exposes the bulkhead to water splashing up from below or trickling down from above. Dirt and chemicals collect in the nooks and crannies and trap moisture almost permanently. On the inside of the cabin condensation or leaks can produce the same effect behind the dashboard, panels or floor mats, thereby creating constant moisture exposure from both sides. No wonder, that the bulkhead is one of those components that suffer most from visible or hidden corrosion. Over time, it can even affect the frame. In case you are tired of piecemeal patch jobs on your Td5’s or 300Tdi’s rusty bulkheads or you are contemplating a proper restauration anyway, we can offer you a complete, primer-coated high-quality bulkhead, made in the EU.Material: Stainless steel
Prices incl. VAT;
Chequer plate for bonnet, Land Rover Defender up to MY07, incl. rivets
Chequer plate for bonnet incl. rivets for Defender up to MY07 Picture 2 serves only as a colour sample for possible coatings, you order here the article in anodising.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Towing Hitch for Land Rover Defender 110/130 - Td4 / Td5
Robust Towbar for your Land Rover Defender 110/130 (Td4/Td5) - Ready for any Adventure! Are you looking for a reliable towbar for your Defender that can handle heavy loads? Then this towbar is exactly what you need! Specifically designed for the Land Rover Defender 110 and 130 models (Td4 and Td5), it offers you the trusted Nakatanenga quality and robustness for your off-road trips and everyday hauling. What makes this towbar stand out: Strong Performance: With a maximum towing capacity of up to 3.5 tons, you can easily pull larger trailers. Complete Set: It comes complete with a towball, so you're ready to go right away. Tested Safety: The towbar is E-approved, meeting all relevant safety standards. Choose Your Connection: Decide between a 7-pin or a 13-pin electrical kit with a multi-connector, depending on what you need for your trailers. Perfect Fit: Designed for all Defender 110 / 130 Td5 / Td4 models. Whether you want to transport wood for your next project, take your boat to the lake, or head off on holiday with your caravan – you can rely on this towbar. Order your towbar now and make your Defender even more versatile!
Prices incl. VAT;
VIAIR Compressor Kit - Constant Duty
VIAIR Compressor Kit - CONSTANT DUTY Compressor system kit from VIAIR CONSTANT DUTY OBA version with compressor 450C delivery rate 51 L/ minute for 12Volt operating voltage incl. 9.5L tank and mounting kitTechnical data: suitable for inflating tyres and operating small air tools or air horns max. voltage: 13,8 Volt max. 10 bar working pressure max. current consumption: 23 amps max. ambient temperature for operating the compressor: 70° Celsius min. Ambient temperature for compressor operation: -40° Celsius max. possible operating time e.g. at 22°C ambient temperature approx. 60 minutes Protection class: IP67Exemplary filling times for the compressor system kit of VIAIR design CONSTANT:Air receiver with 10 litres : - 0 to 9.9 bar - 3 min. 02 sec. - 7.5 to 9.9 bar - 59 sec. Tyre size 35" x 12.50" :- 0 to 2.0 bar - 6 min 55 sec.- 1.0 to 2.0 bar - 3 min. 30 sec. Tyre size 37" x 12.50" : - 0 to 2.0 bar - 7 min 56 sec. - 1.0 to 2.0 bar - 4 min. 09 sec.Compressor system kit from VIAIR model CONSTANT has the following scope of delivery:1 x VIAIR 450C compressor 1 x 9,5 l air tank 1 x 10m air hose 1 x 1/4" quick coupling (F) 1 x 1/4" NPT connector (F) 1 x Control panel with on/off switch and pressure gauge 1 x Pressure switch with relay (7,2 - 10 bar) 1 x Reducer (1/8" NPT F to 1/4" NPT M)
Prices incl. VAT;
7-pin E-kit with multi-plug Defender Td5/Td4
E-approved for Defender Td5 / Td4 7-pin electrical kit with multi-plug This 7-pin e-kit was specially developed for the Land Rover Defender Td5 and Td4 and enables simple, reliable connection of trailers or carriers with 12V lighting. The multi-plug connection ensures quick and clean integration into the original vehicle electrical system Suitable for all Defenders from MY99 up to and including Td4
Prices incl. VAT;
Off-Road Accessories at Nakatanenga: Your Vehicle, Your Rules – Perfect it for Every Adventure!
Your 4x4 is more than just a means of transport – it's your partner for freedom, discovery, and unforgettable moments off the beaten path. To ensure you can enjoy every tour optimally prepared and with maximum performance, safety, and comfort, our comprehensive main category "Accessories" offers you a carefully selected variety of products that will take your vehicle to the next level.
Discover Exactly What You Need – Our Accessory Categories in Detail:
We've structured our accessories clearly for you, so you can quickly and easily find the right components for your vehicle and your individual requirements:
- Attachments: Add more functionality and an individual look to your vehicle. Here you'll find everything from robust trailer hitches (like NATO hitches) and tow bars to snorkels for safe water crossings, as well as specific mounts and attachments that perfectly fit your vehicle model and expand its capabilities.
- Recovery: Be prepared for emergencies and help yourself and others out of tricky situations. Our selection includes powerful winches (electric or manual), high-quality winch accessories, extremely durable recovery straps, kinetic ropes, tree trunk protectors, shackles, snatch blocks, and indispensable sand tracks, recovery boards, or waffle boards.
- Auxiliary Heating: Enjoy comfort and warmth, no matter where you are or what the weather is like. With a reliable auxiliary heater, you ensure pleasant temperatures inside your vehicle or roof tent, even in frost and cold. Perfect for winter camping or chilly nights in the mountains.
- Roof Racks: Expand your storage space and safely transport what you need for your adventure. Discover modular roof rack systems, platforms, crossbars, and a variety of specific accessories for attaching roof tents, transport boxes, jerry cans, sports equipment, and much more.
- Compressed Air: More than just hot air! With powerful compressors (fixed or portable), you can not only bring your tires back to road pressure after an off-road drive but also operate air tools or clean your equipment. Accessories like tire pressure gauges and air hoses complete the range.
- Interior Equipment: Design the interior of your vehicle to be functional, comfortable, and tailored to your needs. This includes seat covers for added protection and comfort, practical center consoles, organizer systems, drawer systems, and other accessories that make long journeys more pleasant and ensure order.
- Organization and Load Securing: Keep your equipment secure and within reach! Discover robust alu boxes, impact-resistant transport boxes, flexible lashing tracks and airline systems with matching fittings, modular MOLLE bags and panels, as well as the brilliantly simple Quick Fist mounts for tools and equipment.
- Protection: Shield your vehicle from the rigors of off-road terrain. Sturdy skid plates for the engine, gearbox, and tank, resilient rock sliders and side steps, robust bumpers (front and rear), differential guards, and fender flares protect your vehicle from damage.
- Tools: Be prepared for repairs and maintenance work on the go. Here you'll find selected hand tools, specialty tools for off-road vehicles, tire repair kits, multi-tools, and everything you need to fix minor problems yourself.
Nakatanenga – Your First Stop for High-Quality Off-Road Accessories:
- From Practice, For Practice: We test many of our products ourselves under the toughest conditions. You only get what has proven itself.
- Expertise and Advice: Our team consists of passionate off-road drivers. We advise you individually and work together to find the best solution for your requirements.
- Quality You Can Rely On: We rely on renowned brands and develop our own products that meet the highest standards.
- Comprehensive Range: From the smallest screw to complete expedition equipment – you'll find it here.
Equip yourself now at Nakatanenga with the best accessories and get your vehicle ready for unforgettable off-road experiences. Your adventure begins with the right gear!