Das könnte Sie auch interessieren
Wear kit with tank extraction and exhaust pipe for AUTOTERM Air 2D / 4D For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. After assembly, we are usually left with unused accessories and spare parts from the original AUTOTERM delivery, so we decided to bundle them as wear and tear replacement kits for only 20 € incl. VAT. That’s a massive price reduction of nearly 70% when compared to the individual value of these spare parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel pick-up tube, one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.
Prices incl. VAT;
The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.
Prices incl. VAT;
Fuel filler nozzle for Land Rover Defender Td5 2.5, Td4 2.4 and Td4 2.2 The fuel extractor for the Land Rover Defender 90/110/130 Td5 2.5, Td4 2.4 and Td4 2.2 enables the auxiliary heater to be supplied with diesel without the time-consuming and labour-intensive removal of the fuel tank.The fuel is extracted by looping the extractor into the hose between the vehicle's fuel nozzle and tank and is therefore possible without removing or drilling into the tank. The fuel dispenser is suitable for various parking heaters, including Webasto Airtop 2000 and Eberspächer Airtronic D2.The fuel filler cap can be flexibly bent, allowing you to control whether the parking heater can completely empty the vehicle's tank or whether a fuel reserve should remain. It is ideally suited for our AUTOTERM Planar heaters.Outer diameter: 59 mmMaterial thickness: 2 mmPlease note: This fuel filler is not suitable for TDI models, as these have a larger pipe diameter.
Prices incl. VAT;
Ähnliche Artikel
Nakatanenga parking heater console 2 New version of the proven parking heater console, it allows the installation of a parking heater (e.g. Webasto Airtop 2000 STC, Eberspächer Aitronic D2 or D11C or AUTOTERM (=Planar 2D12)) under the cubby box of the Land Rover Defender 90/110/130, turning it into an armrest at a comfortable height (158 mm higher). The display of the parking heater is recessed into the front panel of the console.Please note: New holes have to be drilled for the installation of the parking heater console; the required fixing material is included in the scope of delivery.The ever-growing need for power sources in the vehicle cockpit - whether in the classic cigarette lighter format (12 V) or as a 5 V USB socket for Apple iPhones, navigation devices, iPads, smartphones or similar. - the new generation of the Nakatanenga parking heater console now also meets these requirements in the best possible way: it is optionally available with heavy-duty 12 V sockets and/or USB charging sockets from the marine sector. These are then already included in the scope of delivery, so they do not have to be ordered separately. A Webasto air vent can be attached to the cut-out at the rear. In the cut-out for the Planar parking heater, the display is glued on and the cable is fed through the square hole. If none of the front panels contains your desired cut-outs, you can order the front panel without cut-outs and process it accordingly.Basic dimensions: 47.5 cm x 26.5 cm x 15.5 cmATTENTION: An AUTOTERM Air 4D (=Planar 44d) is not recommended for this purpose!
Prices incl. VAT;
Silencer for 60mm hot air hose This warm air silencer reduces the noise of incoming or heated air from the heating system. There are connections for the hot air pipes on both sides. Technical data: Connection dimension 60 mm Length of the silencer 300 mm Overall length 440 mm Silencer diameter 130 mm NOT for combustion air!
Prices incl. VAT;
Mounting Plate Auxiliary Heating
€53.50
Prices incl. VAT; / Parcel shipping
Precisely fitting base plate for parking heaters in Land Rover Defender 90, 110 & 130
Stainless steel mounting plate for auxiliary heating for all popular independent vehicle heaters (Webasto Airtop 2000 STC, Planar 2D12, Eberspächer) simply replaces the centre seat box cover underneath the cubby box of your Defender. All necessary cuttings to fit the heating unit and piping.
The mounting plate fits all Land Rover Defender 90/110/130. Attachment with existing mounting material.
Please note that you also need the Nakatanenga auxiliary heater console to fit an independent heating unit. The cubby box is fitted to this console.
https://www.nakatanenga.de/media/pdf/74/df/0c/Merkblatt-Edelstahl-und-Rost.pdf