Vehicle accessories
VIAIR Compressor Kit - Continuous, 485C CE Compressor, 12V
CONTINOUS DUTY, 485C CE-Compressor, 12V Specifications: 12-volt Permanent magnet motor Duty cycle: 100 % at 200 PSI (13.7 bar) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19 litres) Max. Power consumption: 23 Amps Protection class: IP67 Dimensions: 270 mm L x 105 mm W x 165 mm H Net weight: 4.99kg. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:Stainless steel valves guarantee long-lasting and optimised shut-off timesgenerously dimensioned cooling fins on design-optimised cylinders ensure maximum air dissipation and a longer service lifeAnodised cylinder running surfaces increase protection against abrasionthe piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life propertiesthe motors are protected against splash water and are therefore highly resistant to corrosionintegrated, automatic overheating protection protects the longevity of the compressorsCE labellingTechnical data: 2.5 gallons (approx. 9.5 litres) VIAIR air tank (200 PSI / 13.7 bar) 485C Stealth Black VIAIR compressor with thermal overload protection Digital tyre inflation gun with 180 PSI (12.4 bar) Braided black spiral hose with quick-release coupling 1/4’ NPT quick coupling bolt (F) 1/4’ NPT quick coupling (F) Dashboard indicator with ON / OFF switch Sealed pressure switch (165 PSI (11.3 bar) on, 200 PSI off (13.7 bar) Reducer 1/8‘ NPT (F) to 1/4’ NPT (M) Reducer 3/8‘ NPT (F) to 1/4’ NPT (M) 1/4’ NPT 250 PSI safety valve 1/4’ NPT drain cock (3) 1/4’ NPT compression fittings Suitable for tyres up to 37 inches 4-inch protective sleeves (grommet strips) for air line hoses - Make sure the air line hoses are protected from the sharp edges of the borehole with the supplied grommet strip.Please note: Use thread sealant for proper installation. Thread tape is not recommended. When properly sealed, the recommended torque for 1/8’ is 13.5 Nm. The recommended torque for 1/4‘ and 3/8’ is 22 Nm.
Prices incl. VAT;
Alubox Pro for OZ-Tent
Aluminum cases Pro There are many aluminum cases, but just one “Alubox”. The Wiberg family’s business on Zealand in Denmark has been supplying the Danish military, various rescue services, international expeditions and the off-road community since 1999 with tough, handmade transport cases made from aluminum alloy AW-5754. As you would expect from real Vikings, Danish Aluboxes are seawater resistant. In addition, they can be padlocked, are dust-proof and highly resistant to corrosion and chemicals. The Wibergs’ experience and their commitment to continuously improve the Aluboxes show in the details: extra-robust and impact-proof stacking corners provide tight connections when you put several boxes on top of each other. Spring handles retract, so they’re never sticking out as dangerous obstacles‚ causing damages or injuries. Aluboxes are now made with solid rivets for even greater robustness and durability, even in extreme conditions. The new transport box for the 30-second touring tents by OZtents was developed by Soren Wiberg, who is a big fan of Land Rovers and camping. That’s why he saw right away that the somewhat flimsy OZtent carry bag needs to be improved upon. With packing dimensions of roughly 2 m, OZtents are usually too long to be stowed inside smaller 4x4s. The new Alubox measures 2130 x 510 x 220 mm, making it the ideal storage space for OZtent models RV1, RV2, RV3, RV4 und RV5. The transport case is designed for roof racks, like our very own CargoBear. And if you can fit a tent in your Alubox, you can also fit many other long and unwieldy pieces of equipment: shovels, sand ladders, snow chains and everything else that’s needed on expeditions and camping trips. One more thing: The Wiberg Vikings’ Alubox slogan is “Battered, beaten and still going strong.“ And that’s how we see it, too, when it comes to aluminum cases. Dents, scratches and bruises are at the end of the day part of the deal. They speak of your adventures and that’s why we keep unnecessary and environmentally harmful packaging to a minimum when we are shipping them. Material:Aluminium AW-5754, waterproof / dustproof according to IP54 standard Dimensions:2130 x 510 x 220 mm Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina. Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!
Prices incl. VAT;
Nakatanenga Roll-On Set with U-POL RAPTOR 4 Bottle Kit - Colour: RAL 9011 Black
U-POL RAPTOR Roll-On Set - RAL 9011 Black (4 Bottle Kit) Now it is no longer necessary to spray with a compressor and spray gun - with our new Raptor Roll-On-Set you can now also apply the popular RAPTOR-coating by yourself without any problems! As an official distributor of the popular RAPTOR-coating we have come up with a simple DIY solution together with the official manufacturer U-POL: since the Raptor-coating, unlike other coatings, does not have to be heated, you can use this roll set. The roll-on set consists of:1x color roller bracket with ergonomic profile3x coarse foam structure rolls in top quality (Ø 35mm)2x paint trays or paint trays with practical spout nose and integrated measuring strokes (15x32cm)2x sanding pads for sanding the surface (1x with alumina grain type and 1x with silicon carbide grain type)2x disposable gloves Please refer to the instructions / data sheet for processing instructions.
Prices incl. VAT;
MUD Console for Defender TDI
Universal console for Defender For radio, radio set, additional instruments etc., piece - delivery without instruments or switches.
Prices incl. VAT;
Door net for New Defender from MY2020, driver and passenger side
Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.
Prices incl. VAT;
CargoBear 2.0 crossbar - for Suzuki Jimny 2, GJ
Nakatanenga CargoBear Roof Rack Crossbar Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks. The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper. If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material. Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space) Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all Cargobear 2 roof racks
Prices incl. VAT;
Additional tank 7.5 litres for parking heaters
Additional tank 7.5 litres for parking heaters This additional tank can be placed anywhere on the vehicle.The tank can be filled with 7.5 litres of fuel, e.g. for the AUTOTERM Planar 2D parking heater. Suitable fastening material is included in the scope of delivery.
Prices incl. VAT;
CargoBear Awning Bracket for Land Rover New Defender from MY2020 onwards
Nakatanenga CargoBear - Awning holder for New Defender One of the best moments when car camping or at 4x4 meetings is unfolding the roof awning. It means you've arrived and the cozy part is about to begin. Once the awning is up, you can lounge in your camping chair, put your feet up and plan your next activities over a coffee or a cool drink. And since the CargoBear is also available for the New Defender, there is also the option of attaching numerous awnings and awnings. Our awning holders made of black powder-coated stainless steel are screwed onto the slope of at least two crossbars and are suitable for awnings such as the RoofLodge Awning, RhinoRack Foxwing and SunSeeker. The 3-piece set is supplied including the necessary mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included.
Prices incl. VAT;
Superwinch SX 10SR, 12V 4.5t tractive force, 5.5 hp motor, color: black
SUPERWINCH SX 10SR black The 12 V Superwinch electric winch SX 10 SR has a three-stage planetary gear.The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system.It is used for commercial recovery of rolling loads.Features:Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control boxScope of delivery: 1 x cable winch black 1 x synthetic fibre rope 9.5 mm/ 24 m 1 x cable mouth 1 x relay box 1 x battery cable 1 x cable remote control 1 x radio remote control
Prices incl. VAT;
Upgrade headlamp for radiator grille INEOS GRENADIER, pair
CG2 Light Cannon headlights are the ultimate off-road lighting solution for your Ineos Grenadier. With a range of sizes from 3.0" to 8.7", each light in this series is designed to meet your specific needs, offering unrivalled performance in all conditions. Key Features : Unmatched Power: These headlamps feature ultra-bright 40W single-source LEDs, delivering a long-distance spot beam. You can count on them to light your way, no matter how dark it gets. Maximum adaptability: Choose between a clear or yellow selective lens to adapt to all weather conditions, whether dust, rain, snow or fog. Maximum visibility is guaranteed. Cutting-edge technology: Thanks to iris reflector technology, these headlights offer unrivalled range. You can drive with confidence, knowing you'll see everything in your path clearly. Superior quality: Our CG2 Light Cannon headlights use the highest quality CREE LEDs for long-term durability and performance. You can rely on them to stay strong in the most demanding environments. Easy Installation: Each pair of headlamps comes with a Plug And Play harness included, which means installation is quick and easy. You'll be ready to go in no time. Unlimited customization: All CG2 round LED light guns are compatible with our 25-light-in-one cover system (sold separately). This lets you change the pattern and color of the light to suit your specific driving environment. Transform your Grenadier into the ultimate off-road machine with CG2 Light Cannon headlights. More power, more visibility, more confidence on any terrain. TECHNICAL DESCRIPTION Dimensions (LxWxH) : 14.5 cm x 9.4 cm x 13.4 cm Input voltage: 9-32V DC AMP consumption: 8.17 A Power: 98 W Gross Lumens: 10,500 lm Illumination distance: 279.4 m Beam type: Wide beam and spot beam
Prices incl. VAT;
Anti-slip strips for spare wheel tread, set of 2
Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For our spare-wheel strap-on step, we offer ready-cut, self-adhesive anti-slip pads measuring 12 x 13.5 cm in twin packs. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.
Prices incl. VAT;
Quickfist 12-203mm quick tensioning system belt holder
Ratchet system It can be easily operated with one finger and can hold objects from 12 mm to 203 mm Ø. The maximum load capacity per holder is 30 kg. This makes the system ideal for tools, bottles, fire extinguishers and much more. Technical data: Working range: -20 °C to +80 °C Tested in accordance with AfPS GS 2014:01 PAH: suitable for long-term skin contact Mounting surface: 170 x 100 mm Simple installation with 10 mm screws Max. Load capacity: 30 kg
Prices incl. VAT;
Seat cover for Defender TD4, from BJ 2007
Nakatanenga Seat Cover for Defender TD4 ('07 +) Nakatanenga seat covers for Land Rover Defender Td4 from 2007 These seat covers are now even more accurate than the previous ones and thus provide the ultimate protection with the highest comfort. Seat and back is made of high quality and breathable mesh material. The driver's and front passenger's seats are equipped on both sides with pratic Laser Cut Molle. This can also be found at the back of the seats. Furthermore, the driver and front passenger seats on the back have both a card pocket and a zipped pocket. The Molle offers a variety of possibilities. For example you can attach our practical bag set, with our tightening and fastening belt set fix small items or stow a first aid scissors within reach. The high-quality Laser Cut Molle on the backs of the backrests and on both sides of the front seats allows you to attach many different accessories. Driver or passenger side is 2-pieces each. (Seat cover + headrest)Rear seat is 5-pieces (3 headrests, 1 small cover, 1 large cover) Product features: large map pocket on the back of the backrest zipped pocket on the back of the backrest vlecro / loop tape on the headrests lasercut Molle attachment system for attaching additional bags or equipment (partially on the side and on the backrest) washable at 30 ° C perfect fit, no slipping extremely stable the customized slipcover is suitable for Land Rover Defender Td4 from 2007 Material: 1000D nylon PU coatedWashable 30-60° C Available: in black for front and rear seats Bundle: 2x seat covers for the front seats and 1x cover for the complete rear seat Please select the desired variant. Please note:In the variant "front" 1 piece is delivered - driver and passenger side have the same reference. So if you want to order a cover for the driver and front passenger side, you have to order 2x the variant Front.
Prices incl. VAT;
Warm shower kit 2.0 for Autoterm Air 2D / 4D
Warm shower kit 2.0 - Autoterm parking heater + combiBOIL with Comfort Boiler Control The original from tigerexped - but now even better! The Warm Shower Kit is the simple way to equip touring vehicles or boats & yachts with a hot air heater and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. How does the Warm Shower Kit 2.0 work:The Warm Shower Kit 2.0 can generate hot water in three different ways: Via an electric heating element, which means via electricity if you have just enough reserves, or are connected to shore power.Simply on the side when the heating is running - without consuming any additional energy. Hot water is the "waste product", so to speak.NEW: The boiler can be integrated into the engine's cooling water circuit to heat either the service water itself or a second water loop. Conversely, the engine can also be preheated to make starting more gentle (not suitable for use in arctic temperature ranges).Each of these three options has its advantages and can be used when it suits best. After a few days of self-sufficient camping in hot weather, for example, you don't want to leave the heating on, nor do you want to heat up the water from driving. However, if it is too warm for the heating, there is probably enough solar power in the batteries to generate hot water via the electric heating element. With the combination of three options, this kit always offers the one that fits perfectly in every situation. The options for integration into the cooling water circuit are as follows: Cooling water circuit heats the service water, i.e. the cooling water circuit is connected to the boiler and heats service water for showers etc. while driving. (Caution: As the temperature of the cooling water can rise above 100°C (due to pressure), the boiler must be prevented from overheating by means of a valve or by switching off the circulation pump).The boiler preheats the cooling water circuit (engine), which means that the above function is reversed. The engine cooling circuit can be preheated by connecting the boiler to a 230V/110V power source or by using hot air from the parking heater.Heating a second water loop, whereby the energy that is fed into the boiler via the electric heating element or hot air is fed into a second water circuit via a circulation pump. It is also possible to combine the two water circuits (so that the cooling water circuit heats the second water loop), although precautions must be taken with regard to the flow temperature from the motor. NEW: Integration of a second water loopWith combiBOIL it is possible to operate a second water loop with hot water. For example, underfloor heating or towel radiators can be implemented to make it easier to dry wet clothes and towels in the vehicle. Please note that an expansion tank must be integrated into the water loop and, depending on the application, the water may need to be circulated by a circulation pump. Scope of delivery:The heaterThe diesel parking heaters from Autoterm - shown here in the Air 2D and Air 4D models - have become an integral part of modern motorhomes, boats and yachts. The robust heaters from the Latvian manufacturer have been impressing with their reliability and quality for many years and enjoy an excellent reputation in the industry.Important for self-installers: You can install the heater yourself - without losing the manufacturer's warranty, of course, as long as you follow the enclosed installation instructions from Autoterm. In the event of damage, the inspection is carried out by the seller and the complaint is made directly to Autoterm.The heaters carry an e-mark, which means that the installation does not have to be registered by the TÜV.Please refer to the respective product description of the Autoterm Air 2D and Air 4D models to find out about functions and features such as heating modes, height kit and more. The heaters used in our hot shower kits are identical to those sold separately.The boiler - tigerexped & Autoterm combiBOILThe new combiBOIL hot water boiler is a high-quality product made in Western Europe - and the only boiler for use with an air heater that has an integrated thermostat in the versions with 230 / 110 V heating rods.In the versions for 12 V or 24 V, an external thermostat module is included for space reasons.Fully integrated systemThe combiBOIL can be monitored and controlled directly via the control panel of your Autoterm heater. The heater can thus automatically regulate the temperature of the boiler - a manually operated control flap to divert the hot air is therefore unnecessary in most cases. Dangerous overheating with vapour formation in the boiler is reliably prevented.Only in extreme conditions - such as arctic temperatures in poorly insulated vehicles - can a control flap still be useful.Automatic frost protection can also be set: If the water temperature drops to 2 °C, the heater automatically warms the water to 15 °C and the ambient air to 7 °C.For winter storage, the water should be drained as usual; the boiler has its own drain valve for this purpose. However, if you only leave your vehicle unattended for a short time, this function reliably protects the system from frost damage - ideal in combination with the Warm Shower Kit 2.0.Which size for how many peopleThe combiBOIL hot water boiler is available in 7 litre, 9 litre and 12 litre sizes.Our recommendation: 7 litres is completely sufficient for two people We recommend 9 litres for three or more people 12 litres for four or more people Depending on the heating method, the heated water can reach temperatures of up to 80 °C. By adding cold water, significantly more hot shower water is available than the pure volume of the boiler would suggest.Please note: A larger volume also has disadvantages - longer heating time, higher energy consumption (especially with electric operation), greater space requirements and a larger amount of fresh and waste water that has to be transported. In many cases, "more" is not always "better".Heater scope of delivery - complete with installation kit and control panelHeater(s) of your choice (2 kW, 4 kW or 2 × 2 kW heating power, 12 V or 24 V on-board power supply)Ready-to-plug-in wiring harness with AMP SuperSeal plugsStainless steel exhaust silencer (17 × 9 × 5 cm)Fuel pumpIntake silencer (for the burner, not the hot air) Fuel line Extensive range of small parts for installation Autoterm Comfort Boiler Control control panel - for controlling the heating and boiler (see Autoterm Comfort Control Standard for details of the heating modes) Hot air duct 2 × rotating hot air outlet nozzles 3 m hot air pipe 2 × adapters for the hot air connections of the boiler 1 × Y-piece (asymmetrical) Water connectionHot water connection kit (TEX1778) - for simple, safe and error-free integration of the boiler, even by non-professionals. This kit minimises installation errors and makes the most demanding part of the water installation particularly straightforward.Included are: 0.5 m special blue silicone drinking water hose 1.0 m red special silicone drinking water hose 1 × adjustable thermostatic mixing valve / scalding protection 3 brass spouts with external thread 2 brass spouts with internal thread (1 only included in the hot shower kit) PTFE thread sealing tape 1 × straight hose connector 1 × T-piece for connection to the cold water pipe 6 × stainless steel hose clamps with tightening jaws 2 × smaller stainless steel clamps
Prices incl. VAT;
Mudguard widening kit for Suzuki Jimny from TREKFINDER with 4 pieces each 150 cm long incl. TÜV®.
Mudguard widening kit for the Suzuki Jimny I FJ from TREKFINDER - 4 pieces, each 150 cm long / tyre tread cover 20 mm / incl. TÜV® / universal mounting Ideal e.g. with the 56 mm wheel spacer from TREKFINDER in combination with 215 tyres on 5.5J standard rims !!! Inexpensive and flexible wing flares in very good quality indestructible and therefore durable mudguard extensions made of black rubber the fender flares are glued to the existing wing flares of the Jimny and additionally fixed with screws (the screws are not included in the scope of delivery) the factory backing film is removed and the fender flares are then glued to the clean surface SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, 150 cm each 1 TÜV® test report 1 type plate 1 piece assembly instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended
Prices incl. VAT;
Rear ladder for New Defender - left side
Rear ladder left, black powder-coated What makes a good rear ladder? It is sturdily constructed and allows safe and easy access to the roof rack in all weather conditions. That much is clear. A VERY good rear ladder, like the one from Terrafirma, also fits aerodynamically to the shape of the bodywork, minimizing fuel consumption and wind noise. In addition, the view of the rear lights remains unrestricted and opening the rear door is not impeded in any way. The Terrafirma rear ladder for the New Defender (from BJ2020) is made of 25 mm steel tubes and has non-slip perforated steps and a durable powder coating in elegant black. Installation instructions and mounting materials are included.
Prices incl. VAT;
Recovery eyes red for New Defender rear - 1 pair
Towing and recovery eyes for the New Defender - Robust. Conspicuous. Indispensable. Do you want your New Defender to be not only stylish, but also absolutely suitable for off-road use? Then our red towing and recovery eyes are just the thing for you! This set of 1 pair of eyelets for the rear of your New Defender combines high functionality with a striking design - perfect for anyone who wants to be prepared for any adventure. Why towing and recovery eyes for the New Defender? Whether off-road, on unpaved roads or in an urban environment - sometimes you simply need a reliable way to secure or recover your vehicle. Our towing and recovery eyes offer you the safety and robustness you need to be prepared for any situation. And all in an eye-catching red colour that is not only practical, but also a real eye-catcher. Advantages at a glance: High-quality materials: The eyelets are made of robust cast steel and offer maximum resilience. Eye-catching design: The bright red not only ensures better visibility, but also gives your Defender a striking look. Easy to fit: The eyelets have been specially developed for the New Defender and can be installed without modifying the vehicle. Versatile: Perfect for towing, recovering or securing your vehicle in any situation - an always-ready mount for tow ropes and recovery straps. Who are the towing and recovery eyes suitable for? Off-roader: For all New Defender drivers who are travelling off the beaten track and want to be prepared for any situation Adventurer: Perfect for outdoor enthusiasts who want to be able to recover their New Defender safely even in the most difficult terrain. Design lovers: If you want to give your New Defender a sporty and functional look, these eyelets are the perfect choice.
Prices incl. VAT;
Upper dashboard rail Land Rover Defender MY1983-2006
Organize Your Defender Dashboard The padded upper dashboard rail of the Land Rover Defender is an outdated relic of the past. Finding clean, undamaged original parts is nearly impossible. Our high-quality reproduction provides the perfect solution to refresh one of the most worn areas of the Defender cockpit – ideal for restoration projects! Premium Finish at OE Level Our Defender Top Rail is delivered as a ready-to-install panel, professionally trimmed by a leading UK Tier-1 automotive supplier. The result: an original equipment-level finish that meets the highest standards. This upper dashboard rail is a faithful reproduction of the "Pad-Facia Crash Assembly", originally fitted in Land Rover Defender models from 1983 to 2006. Perfect Fit for Your Vehicle Matches Land Rover part number MXC6084PMADesigned for the "wide" windshield vent version from VIN (V)HA455946 onwardAvailable in durable ABS plastic or with a high-quality vinyl trim Upgrade your Defender’s interior with a flawless finish – restore and refine your dashboard today!
Prices incl. VAT;
Awning holder, 2 pieces for Horntools ExRoof roof rack
Awning holder, 2 pieces for Horntools ExRoof roof rack Attaching an awning to our ExRoof roof rack is now even easier! With this awning bracket, you can easily attach your awning to your roof rack. Scope of delivery: 2 piece awning bracket
Prices incl. VAT;
Roof rack ExRoof for VW T5 / T5.1 / T6 / T6.1 - L1/SWB ((Multivan, Transporter, Caravelle, Estate)
The innovative horntools ExRoof roof rack is your perfect everyday companion! Attention: Not compatible with VW T6 California (pop-up roof) and VW T6 Doka (flatbed with double cab) Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the VW Multivan / Transporter / Caravelle / Kombi of the T5/ T5.1 / T6 / T6.1 (L1/SWB) / short wheelbase model series is made of powder-coated aluminum and therefore weighs just 47 kg. With a size of 2675 x 1500 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle. Roof rack uses the original mounting points, no drilling required Compatible with VW T5 & T6 Multivan, Transporter, Caravelle and Kombi With rubber pads between roof rack base and vehicle to protect against corrosion Four individual roof rack feet provide stability in a lightweight construction Hardly any wind noise thanks to aerodynamic deflector ExRoof roof rack for Volkswagen Transporter & Multivan T5 / T5.1 / T6 / T6.1 - L1 / SWB with short wheelbase (year of construction 2003 to present) Practical accessories such as ring eyelets, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack. Technical data: Dimensions: 2675 x 1500 mm (platform) Weight: 47 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Height: approx. 10 cm (at the highest point between the car roof and the top edge of the roof rack) Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions
Prices incl. VAT;
AUTOTERM air 2D (Planar 2D) parking heater, space-saving design (90° angle)
AUTOTERM air 2D (Planar 2D) parking heater, space-saving design (90° angle) Proven heating technology for campers, off-roaders, boats and more. Formerly known as the Planar 2D, the Autoterm Air 2D is one of the most popular diesel parking heaters for campers, motorhomes, boats and expedition vehicles. Robust, reliable and safe - with extremely low fuel and power consumption - it is perfect for anyone who needs reliable heat on the road. Manufactured in Latvia, it is completely “Made in Europe”. High quality, high flexibility and perfect for DIY installation. Thanks to its compact design and various operating elements, the Autoterm Air 2D is suitable for almost any touring vehicle - from panel vans to expedition trucks. It can also be used on the water. Thanks to the E-mark, it can be installed without registration - without TÜV approval and without loss of warranty if you install it yourself. It is available for 12V for most campers and vans. The heater is available with two different hot air outlets for different space conditions and installation situations. 1. with straight outlet (can be found here): Please note that the warm air must be directed away from the heater in as straight a line as possible. The hot air pipe should ideally only make slight bends and must not make a 90° angle or similar bends directly behind the heater. Otherwise, heat will build up in the heater, causing it to switch off for safety reasons. 2. with 90° angle: Here, the hot air is discharged from the heater at a specially flow-optimized 90° angle. The outlet can be installed facing upwards or to the side. When installing this version in particular, it is important to realize straight piping from the heating outlet. The maximum pipe length must not exceed 3-4m.Important: Even if the heaters are completely identical: If you use the straight version of the warm air pipe to create an angled outlet as with the space-saving housing, your heater will overheat. Therefore, please plan your installation with regard to the routing of the hot air pipe before ordering so that you know immediately whether the straight or the angled outlet is more suitable for your installation! High-altitude kit as standard - ready for any adventure Whether in Nepal or the Andes: The Air 2D is equipped with an altitude kit that automatically adjusts the combustion to the change in air pressure. This means it runs reliably even at high altitudes. Nevertheless important: At very high altitudes, the amount of oxygen decreases - and with it the maximum output of the heater. As a rule of thumb: from an altitude of approx. 2000 m, the heater loses approx. 5 % output per 500 meters of altitude. And: the higher the altitude, the more sensitive the heater is to resistance in the air flow. Therefore, especially for operation at high altitudes, use the shortest and simplest possible air ducting and above all avoid angles and kinks! You can also simply remove the pipework completely for this time. Maintenance: Don't forget to burn off Like any diesel engine, a diesel parking heater needs to reach a certain temperature from time to time to get rid of deposits. Therefore, when you leave the mountains, let it run at full load for an hour. The same applies if it is permanently operated at a low level. This is comparable to a proper highway trip to maintain a diesel car. Control and operating elements A control panel is included with the heater (simply select the appropriate one above). You have the choice between these models: Simple control panel Rotary control with power control, optional temperature mode with separate sensor. Comfort Control Panel Modern OLED display, menu navigation finally also in German, timer function, voltage display, thermostat mode, multifunctional rotary control - everything you need. Scope of delivery: Autoterm Air 2D heater Control element Extra quiet fuel pump incl. rubber holder Exhaust silencer (17 × 9 × 5 cm) Intake air hose with integrated silencer Cable harnesses for pump and heater Exhaust pipe (1 m metal), end piece + clamp Heat protection hose Fuel line (5.5 m), connector, tank intake pipe Assembly material (screws, nuts, clamps, heat-shrink tubing, cable ties) Operating instructions Attention: Sufficient length of fuel hose is included (simply cut into pieces if necessary). Dimensions of the Air 2D Length: 33 cm Height: 12 cm + 2.5 cm for connections Depth: 12 cm Weight: 2.86 kg (without accessories) To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate.
Prices incl. VAT;
Door hinges for Mercedes Benz G-Class
Various sets of door hinges for Mercedes Benz G-Class Many owners of the G-Class know the problem only too well: the original door hinges start to rust, the paint flakes off and the doors become increasingly difficult to open and close. This is exactly where we come in - with a long-lasting solution: high-quality door hinges made of high-strength aluminium offer optimum protection against rust and corrosion thanks to a special surface finish.The centrepiece of the design is a tried-and-tested stainless steel pin with a milled spiral groove that distributes the grease ideally. Thanks to the integrated grease nipple, the hinges can be easily re-greased at any time. Of course, we also supply everything you need for installation.Advantages with the Offroad Monkeys door hinges for the G-Class: Suitable for Mercedes G 460 / 461 / 463 up to model year 2018 Available for 2- and 4-door models - or individually for one door No rusting, no more jamming - Made of high-strength aluminium precise and robust Corrosion and UV-resistant thanks to special coating Lubricatable via integrated grease nipple Stainless steel plain bearing replaceable Stainless steel bolts with spiral groove for even grease distribution Plastic washers included to protect against contact corrosion Registered design Paintable & can be completely dismantled 100% Made in Germany Door hingeSet for only one door (left or right) Suitable for the respective side front and rear Contains 2 door hinges Includes precisely fitting seals and all necessary stainless steel screws Door hinge set for 2-door G-Class Contains 4 door hinges With matching seals and stainless steel screws Door hinge set for 4-door G-Class Contains 8 door hinges With matching seals and stainless steel screws Tools for easy removal of the catch bolts can be found here.The matching window hinges, rear door hinges and bonnet hinges for the Mercedes G are also available from us.
Prices incl. VAT;
Rear door hinges for Mercedes Benz G-Class
Door hinges for single or double-wing rear doors of the Mercedes G Say goodbye to rust - reliable door closure guaranteed!The rear door hinges for the Mercedes-Benz G-Class from Offroad Monkeys make it possible.What starts with the side doors continues at the rear door: rust, stiff hinges and chipped paint due to corrosion are among the most common problems with the G-Class. But this is now a thing of the past!The high-strength rear door hinges made of aluminium ensure that the rear door is permanently rust-free, closes precisely and keeps the vehicle interior dry - even under extreme conditions. A special coating provides reliable protection against corrosion, UV radiation and environmental influences.A cleverly milled stainless steel bolt with spiral groove ensures optimum grease distribution. Lubrication is conveniently carried out via integrated grease nipples that are invisible from the outside.Everything required for installation is already included in the scope of delivery - simply unpack and get started!Advantages of the Offroad Monkeys rear door hinges for the G-Class:Suitable for Mercedes-Benz G 460 / 461 / 463 (up to model year 2018) Suitable for single-leaf and double-leaf rear doors No rust, no jamming no more problems with the door hinges Made from high-strength aluminium Corrosion and UV-resistant thanks to special surface coating Lubricatable via integrated grease nipples Replaceable stainless steel plain bearing Stainless steel bolts with spiral groove for perfect grease distribution Registered design Can be painted & completely dismantled 100% made in Bavaria Scope of delivery:For single-wing rear door (set): 2 hinges Precisely fitting seals for paint protection All stainless steel screws required for installation For double-wing rear door (set): 4 hinges Precisely fitting seals for paint protection All stainless steel screws required for installation The matching door hinges, window hinges and bonnet hinges for the Mercedes G are also available from us.
Prices incl. VAT;
Hinges for bonnet Mercedes Benz G-Class
Bonnet holder with style and function - for Mercedes-Benz G-Class The bonnet holder is one of the typical weak points of the Mercedes G-Class: Rust builds up quickly, making it difficult to open the bonnet and impairing its function in the long term. Our solution: high-quality bonnet brackets made of aluminium - a durable and well thought-out alternative.Thanks to their robust design and sophisticated features, rusting hinges are a thing of the past. The bonnet can be removed in a few simple steps and maintenance is easy thanks to the integrated grease nipple. A reinforced stainless steel pin with spiral groove ensures optimum distribution of the grease - for long-lasting smooth operation.The advantages at a glance: Suitable for Mercedes-Benz G-Class models W460 / W461 / W463 up to model year 2018 Quick and easy removal of the bonnet No more rusting or jamming Made from high-strength, precision-milled aluminium Corrosion and UV-resistant thanks to special coating precision-milled aluminium Corrosion and UV-resistant thanks to special coating Lubricatable via integrated grease nipple Stainless steel plain bearing (replaceable) Stainless steel bolts with spiral groove for perfect grease distribution Plastic washers to prevent contact corrosion Registered design Can be painted and completely dismantled 100% Made in Bavaria Scope of delivery: 2 bonnet brackets Including precisely fitting seals to protect the paintwork All stainless steel screws required for installation included The matching door hinges, rear door hinges and window hinges for the Mercedes G are also available from us.
Prices incl. VAT;
Ejector tool for Mercedes-Benz G-Class catch bolt
Changing door hinges - simple - quick - stress-free with the ejector tool for catch bolts With our specially developed ejector tool, the catch bolts of the Mercedes-Benz G-Class can be removed effortlessly - without any unnecessary effort.Problems often occur when replacing the door hinges: The original bolts are often worn out, bent or difficult to access. This is exactly where our tool comes in. It enables the bolts to be removed quickly and easily - precisely, efficiently and without damage.This makes replacing the hinges child's play.All hinges for the Mercedes Benz G-Class are available from us: Door hinges (for 2- or 4-door) Door hinges for rear door (1- or 2-leaf) Hinges for bonnet Window flap hinges
Prices incl. VAT;
Tailgate organiser with 5 MOLLE pockets, for Suzuki Jimny FJ, GJ/HJ with tailgate
Tailgate Organiser – Tailgate organisation system for Suzuki Jimny 1+2 For anyone who drives a Suzuki Jeep: the Tailgate Organiser transforms the tailgate into a practical storage space for small items such as first aid kits, tools or outdoor gadgets. Thanks to the MOLLE laser-cut system, various bags can be attached flexibly – for tidiness and quick access. The advantages of MOLLE Laser Cut: Reduced weight thanks to less material Easy attachment and removal of bags Flat design, no snagging Firm and secure hold Further information on the MOLLE system can be found in the downloads. Scope of delivery: Suzuki Jimny up to model year 2018 FJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny 2 GJ/HJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Important note: On Suzuki Jimny models built from 2021 onwards (type GJ/HJ), the emergency release for the tailgate can no longer be used once the organiser has been fitted. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Tailgate Organizer für UNIVERSAL-Hecktürensystem mit 5 MOLLE Taschen, 2 Größen
The Tailgate Organiser – Universal tailgate organisation system Whether you're a camper, off-roader or everyday driver, the universal Tailgate Organiser allows you to make good use of the unused space on your tailgate. First aid kits, gloves, multimeters or repair kits: everything has its place in the MOLLE laser-cut pockets and is immediately accessible. Advantages of the MOLLE laser-cut system: Lighter than sewn versions Quick bag change (e.g. first aid) Flat and free of annoying snags Stable hold, no slipping You can find more detailed information about MOLLE in Documents. Scope of delivery: Universal 650x250 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 650x250 mmOptional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plate 740x350 mmOptional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Carrying Straps for Recovery Tracks
Practical Shoulder Strap for diffrent Recovery Tracks It takes a lot to get a 4x4 stuck in some sand or mud and if there is no going forwards or backwards, Recovery Tracks are usually one of the first and best solutions. To make operating these Recovery Tracks now even more intuitiv the versitile and robust shoulder straps can be used in various ways. The strap can easily be attatched and detached from the track. The sewed on net-pocket contains an additional strap, which can be attatched right to the track, this way the tracks can be easily pulled back out of the deepest mud without you having to get dirty yourself. 100% NylonBuckle: Decal / ITW / Duraflex <iframe width="560" height="315" src="https://www.youtube.com/embed/v6Acrsdx610" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Winch Hook - rated up to 2000kg - For 7-8mm Winch Cable
Robust Winch Hook from Nakatanenga: 2000kg Load Capacity for 7-8mm Steel Cables – Safety in Every Recovery In demanding off-road use, forestry work, or agriculture, reliable recovery equipment is essential. A critical component of every winch is the winch hook, which establishes the connection between the winch and the anchor point. The Nakatanenga winch hook, with an impressive load capacity of 2000kg and specifically designed for steel cables with a diameter of 7-8mm, offers the safety and robustness you need in critical situations. High Load Capacity for Demanding Tasks With a maximum pulling load of 2000 kilograms (equivalent to 2 tons), this winch hook is a real powerhouse. It is designed to reliably withstand even demanding recovery operations or heavy pulling tasks. This high load capacity makes it a versatile tool for a wide range of vehicles and winches operating within the specified cable diameter range. Optimized for 7-8mm Steel Cables The specific design for steel cables with a diameter of 7 to 8 millimeters ensures an optimal fit and power transmission. This is crucial to ensure a secure and positive connection between the cable and the hook. Correct sizing also prevents unnecessary wear on the cable and the hook itself, thus contributing to the longevity of your entire winch setup. Robust Construction for Maximum Durability Made from high-quality, durable material, the Nakatanenga winch hook is designed to withstand the highest loads and harsh off-road conditions. The robust construction ensures a long service life, even with regular use in adverse weather conditions, mud, or contact with stones. A resistant surface coating also effectively protects against corrosion. Safety First – The Integrated Safety Latch An indispensable feature of this winch hook is the integrated safety latch (also known as a safety catch or gate). This mechanism reliably prevents the unintentional unhooking of the cable, recovery strap, or anchor point during winching operations. This is a crucial safety factor that minimizes the risk of accidents and enables a controlled recovery process. Versatile Applications Although perfect for off-road vehicle recovery, this winch hook also finds application in other areas. In forestry for skidding logs, in agriculture for pulling tasks, or for general tasks requiring the use of a winch with a 7-8mm steel cable, this hook provides valuable service. Nakatanenga – Quality You Can Rely On Nakatanenga stands for field-tested and durable off-road equipment. This winch hook seamlessly fits into this quality promise and has been developed to meet the high demands of off-road enthusiasts and professional users. The Nakatanenga winch hook with a 2000kg load capacity for 7-8mm steel cables is more than just a connecting piece. It is a guarantee for safety, reliability, and durability in all your winching operations. Invest in quality that pays off in the decisive moment and equip your winch with this robust hook from the Nakatanenga off-road shop.
Prices incl. VAT;
Adventure 4x4 - rock slider for Mercedes G-Class, left and right side
The high-quality sliders made of 3mm stainless steel fit all Mercedes G-models 461 and 463 and can be easily attached to the original stopping points of the running boards. The stable design offers optimal protection for your vehicle from the side and from below. The fitted shape fits perfectly to the silhouette of the vehicle and the high seat of the "G-Silde" also ensures an unchanged ramp angle. The distinctive design of Abeneuer4x4 also applies to this product "Made in Germany": the drawn knobs. These also offer a non-slip surface and ensure a secure stand. Dirt can be rinsed out through openings on the underside of the slider. Material:Stainless steel, black powder-coated Important NOTE:The original screwing points of the running boards must be available for smooth installation of the G-Slide. Scope of delivery:1 set of rock sliders (left & right) including holder and fastening material. As a useful add-on, there are matching anti-slip pads for the Rockslider.
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender, with 4 LED Worklights Round
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted suspended) - so that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details.The bracket is equipped with four round Vision-X Utility Market Extreme LED worklights. A total luminous flux of 1,3804 lumens is generated from 7 LEDs per lamp (raw), the power consumption is only 2.9 A (at 12 V), the lights are multi-voltage capable (9-32 V). The two lights for mounting on the outer fastening points of the carrier ensure good visibility to the right and left of the vehicle with 60° illumination, while the two inner lights with 10° illumination provide a beam of light directed far to the front - in this way, as large an area as possible is illuminated in a practical manner and obstacles on the roadway as well as to the right and left of it can be recognized (e.g. approaching game). Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. Please note: A cable set is NOT included in the scope of delivery!!! The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
RAID HP Expanded Racing Grates
Universal expanded racing grates, Material: Aluminium, black oxydised, Dimensions 125x20 cm The universal size allows for numerous applications, e.g. a grill, an air-vent, bumper openings, ...
Prices incl. VAT;
Off-Road Accessories at Nakatanenga: Your Vehicle, Your Rules – Perfect it for Every Adventure!
Your 4x4 is more than just a means of transport – it's your partner for freedom, discovery, and unforgettable moments off the beaten path. To ensure you can enjoy every tour optimally prepared and with maximum performance, safety, and comfort, our comprehensive main category "Accessories" offers you a carefully selected variety of products that will take your vehicle to the next level.
Discover Exactly What You Need – Our Accessory Categories in Detail:
We've structured our accessories clearly for you, so you can quickly and easily find the right components for your vehicle and your individual requirements:
- Attachments: Add more functionality and an individual look to your vehicle. Here you'll find everything from robust trailer hitches (like NATO hitches) and tow bars to snorkels for safe water crossings, as well as specific mounts and attachments that perfectly fit your vehicle model and expand its capabilities.
- Recovery: Be prepared for emergencies and help yourself and others out of tricky situations. Our selection includes powerful winches (electric or manual), high-quality winch accessories, extremely durable recovery straps, kinetic ropes, tree trunk protectors, shackles, snatch blocks, and indispensable sand tracks, recovery boards, or waffle boards.
- Auxiliary Heating: Enjoy comfort and warmth, no matter where you are or what the weather is like. With a reliable auxiliary heater, you ensure pleasant temperatures inside your vehicle or roof tent, even in frost and cold. Perfect for winter camping or chilly nights in the mountains.
- Roof Racks: Expand your storage space and safely transport what you need for your adventure. Discover modular roof rack systems, platforms, crossbars, and a variety of specific accessories for attaching roof tents, transport boxes, jerry cans, sports equipment, and much more.
- Compressed Air: More than just hot air! With powerful compressors (fixed or portable), you can not only bring your tires back to road pressure after an off-road drive but also operate air tools or clean your equipment. Accessories like tire pressure gauges and air hoses complete the range.
- Interior Equipment: Design the interior of your vehicle to be functional, comfortable, and tailored to your needs. This includes seat covers for added protection and comfort, practical center consoles, organizer systems, drawer systems, and other accessories that make long journeys more pleasant and ensure order.
- Organization and Load Securing: Keep your equipment secure and within reach! Discover robust alu boxes, impact-resistant transport boxes, flexible lashing tracks and airline systems with matching fittings, modular MOLLE bags and panels, as well as the brilliantly simple Quick Fist mounts for tools and equipment.
- Protection: Shield your vehicle from the rigors of off-road terrain. Sturdy skid plates for the engine, gearbox, and tank, resilient rock sliders and side steps, robust bumpers (front and rear), differential guards, and fender flares protect your vehicle from damage.
- Tools: Be prepared for repairs and maintenance work on the go. Here you'll find selected hand tools, specialty tools for off-road vehicles, tire repair kits, multi-tools, and everything you need to fix minor problems yourself.
Nakatanenga – Your First Stop for High-Quality Off-Road Accessories:
- From Practice, For Practice: We test many of our products ourselves under the toughest conditions. You only get what has proven itself.
- Expertise and Advice: Our team consists of passionate off-road drivers. We advise you individually and work together to find the best solution for your requirements.
- Quality You Can Rely On: We rely on renowned brands and develop our own products that meet the highest standards.
- Comprehensive Range: From the smallest screw to complete expedition equipment – you'll find it here.
Equip yourself now at Nakatanenga with the best accessories and get your vehicle ready for unforgettable off-road experiences. Your adventure begins with the right gear!