Vehicle accessories
GDW hitch bracket incl. Erich Jaeger E-block 13-pin specific, for Land Rover New Defender Type LE
GDW hitch bracket with 13-pin Erich Jaeger E set The New Defender L663 (from MY 2019) is not only an extraordinary off-road vehicle, it also packs a remarkable punch. The wide variety of engines from Diesel and petrol to PHEV deliver between 200 and 525 HP and 400 to 650 Nm torque. Its power makes the new Landy the ultimate towing vehicle up to 3.5t towing capacity. And the fact, that the trailer hitch – whether detachable or electrically deployable – has to be ordered as an extra, is not really a disadvantage. When configuring your New Defender it’s probably best to skip this feature and get a heavy duty towbar like the one from GDW with its 13-pin electric connector kit by Erich Jaeger. The advantages of the GDW trailer hitch are obvious: A 4-bolt mounting plate will fit the included towball hitch but also any other type of coupling, the GDW coupling block comes at a much more competitive price than the OEM parts. Installation and road use do not need to be technically certified, by the way. The GDW towbar was custom-designed specifically for the New Defender. It comes with detailed assembly instructions and a complete electrics kit. Installing the towbar will take approximately 3 hours. Please note:The GDW towbar may interfere with the sensors of the vehicle’s parking aid. If you rely on this system, you should use the original tow bar. Maximum towing: 3,5 t Maximum vertical load: 210 kg (the maximum drawbar load is specified by the vehicle manufacturer and can be found in the vehicle documents)
Prices incl. VAT;
Conversion kit for 2nd row seats, Land Rover Defender 110 Station Wagon until MY2007
Great conversion kit for the 2nd row of seats With the introduction of Td4 Puma models from MY2007 onwards, Defenders featured not only a new engine and drive train but also significant changes to the interior. Due to new safety regulations, second row seats and their mounting points required a new layout. Consequently, more recent Td4 back seats will not fit when restoring or converting older pre-2007 models. Our conversion kit enables you to install post-2007 second row seats in pre-2007 110 Defender Station Wagons. The back seat mounting kit contains a mid-crossmember, two second row seat supports, chassis bracket fixing kits and two adapted front panels for the rear wheel arches. All parts are galvanized.
Prices incl. VAT;
Nakatanenga Mudguard Dust Box
Nakatanenga Mudguard Stowage Box The Nakatanenga mudguard storage boxes for the Land Rover Defender 90 / 110 are very light thanks to the case construction used, yet robust - an ideal combination for any touring vehicle! In addition, there are very high-quality fittings with field-proven performance features and great flexibility in design. We offer the box in two lengths as standard. The short design (630 mm length) is intended for the right-hand side of the Defender. The long design (900 mm length) is used on the left-hand side. If an internal roll cage is fitted, a mudguard stowage box can still be fitted: no modification is necessary on the right side due to the tank connection, the short box is used on the left. If you need special lengths or already have other installations in the rear of the vehicle, please contact us - we can work out very flexible solutions for you! Dimensions:Length: either 630 or 900 mmTotal height: 450 mm (400 mm storage box, 50 mm lid)Depth: 225 mm (at the foot 340 mm)Weight: approx.11 kg The aluminium profiles, which allow rivet-free assembly and thus ensure an elegant appearance, are anodised, the corners are made of a robust grey plastic. The surfaces of the storage box are made of 6.9 mm thick birch plywood, a material that combines high robustness and low weight. It is made with a D4 adhesive which, according to DIN/EN204, is "suitable for indoor use with frequent and long-lasting exposure to run-off water or condensation". The wood is colour-coated with PVC and covered with a counterfoil. We currently offer the mudguard stowage box in four colour variants: black grey slate grey petrol Other colours are available on request - please enquire: blue sky blue navy night blue red bordeaux orange yellow white silver aluminium stucco The hinges and latches come from the professional audio and studio sector and are designed for years of use under the toughest conditions. The butterfly latches keep the box securely closed without rattling, while sturdy uprights prevent the lid from folding shut - your fingers will thank you! An optional padlock can be fitted on request. Delivery includes mounting material. Existing screw holes on the vehicle are used for mounting, these must be drilled on the box. An adapter is supplied for wheel housings from model year 2007. This item is bulky goods.
Prices incl. VAT;
RuumX Subdivision system for aluminium box
Subdivision system / protective foam for aluminium box Nothing beats aluminum boxes, especially the ones by Danish outfitter Alubox.com, when it comes to transporting or storing gear and equipment. They are light, sturdy and resistant to corrosion, chemicals and many other environmental influences. How can you improve an aluminum box? By adding an interior structure for more organization and safety. That’s why Alubox.com have come up with their RuumX solution, a customizable system of padded layers walls, dividers and protective “egg crate” foam. Whether it’s dishes, tools or electronic equipment, the protective divider system makes transport and storage in aluminum boxes significantly safer and more organized. RuumX also allows for very specific customization. The set consists of two self-adhesive foam-pads for the bottom and the inside of the lid, two perfectly fitting side wall elements with rounded corners as well as five dividers, which can be cut to the desired lengths. All walls and dividers are made from corrugated plastic panels with foam layers on both sides. These sandwich panels are lightweight yet extremely robust. The cells or slots in the panels are also used to firmly attach different elements to each other, using the steel pins included in the delivery. RuumX kits come in two varieties, differing only in the height of walls and dividers. The lower version has a height of 14.5 cm and fits the Aluboxes A042 and S060, the higher one can be used for both S060 and A073 and has a height of 19.5 cm. Please noteEgg crate foam for the inside of the lid can be ordered ctseparately to prote sensitive equipment even better.
Prices incl. VAT;
Black Mamba XL - dynamic KERR Recovery Rope 22.6t
Black Mamba XL: The Ultimate Kinetic Force – Dynamic KERR Recovery Rope with 22.6 Tons from Nakatanenga Imagine your heavy expedition vehicle, your mighty Unimog, or your fully loaded off-road truck is hopelessly stuck. In moments like these, where standard recovery equipment reaches its limits, you need a solution that knows no compromises. This is where the Black Mamba XL Dynamic KERR Recovery Rope from Nakatanenga comes into play – the ultimate insurance for the really tough cases and most extreme off-road challenges. KERR Technology for Heavyweights – Why XL Makes the Difference You may already know the advantages of KERR (Kinetic Energy Recovery Rope) recovery ropes: the ability to stretch under load, store kinetic energy, and then release it gently and powerfully to the stuck vehicle. The Black Mamba XL takes this principle to the extreme. With vehicles of high tare weight, the forces involved are enormous. A static rope would lead to brutal shocks here, putting extreme strain on material and people. The Black Mamba XL, on the other hand, absorbs the energy of the pulling vehicle like a gigantic muscle pack and unleashes it in a controlled manner to free even colossal vehicles from their predicament. The Brute Power of the Black Mamba XL – 22.6 Tons That Leave No Questions Unanswered With an almost unbelievable breaking strength of 22.6 tons, the Black Mamba XL is designed for absolute heavyweights. Whether it's heavy trucks in off-road use, large agricultural and forestry machinery, or fully equipped expedition mobiles of the highest caliber – this rope is your reliable partner when it comes to mobilizing massive forces. This extreme load capacity gives you the certainty of not being let down, even in the most hopeless situations. Dynamics that Protect and Perform – Even in Extreme Ranges: Maximum Protection, Maximum Effect: Despite the immense forces, the dynamic elongation of up to 30% ensures a comparatively gentle energy build-up and controlled power delivery. This protects recovery points, frames, and drivetrains even during the heaviest recovery operations. Superior Effectiveness: Especially when vehicles weighing tons get stuck in the deepest mud, soft sand, or snow, the Black Mamba XL unfolds its full potential. The kinetic "whip effect" is often the only thing that still helps. Extremely Robust and Indestructible: Made from specially selected and treated high-performance synthetic fibers, the Black Mamba XL is designed for maximum resistance to abrasion, cuts, UV radiation, and moisture. A tool for life under the toughest conditions. Safe and Professional Handling: The massively reinforced and specially protected loops at both ends are designed for the highest loads and ensure an absolutely secure connection with heavy-duty shackles or recovery points. Why the Black Mamba XL from Nakatanenga? At Nakatanenga, we understand the extreme demands you and your equipment face in heavy off-road use. Our products are tested under the toughest conditions and are designed for professional demands. The Black Mamba XL KERR Recovery Rope is the quintessence of our experience in heavy-duty recovery. Impressive Technical Data: Length: approx. 15 m Diameter: approx. 36 mm Breaking Strength: approx. 22,600 kg Color: Deep Black (typical Black Mamba) Material: High-performance polyester, specially braided (Square Braid) Country of Manufacture: Germany (Quality Assurance) Weight: Not insignificant, but appropriate for the performance (17.4 kg) Elongation: approx. 25-30% Your Ultimate Saviour for Extreme Missions If you're on the move with heavy equipment and don't want to compromise on the safety and performance of your recovery gear, the Black Mamba XL is your first choice. It's designed for professionals in commercial use, for ambitious overlanders with large vehicles, and for anyone who knows that you need extreme equipment for extreme situations. Don't rely on standard solutions when you're moving a heavyweight. With the Black Mamba XL Dynamic KERR Recovery Rope from Nakatanenga, you have the absolute certainty of being equipped for every conceivable recovery situation in the heavy-duty sector. Secure the unsurpassed power of the Black Mamba XL now in the Nakatanenga Offroad Shop and master even the greatest challenges with supreme composure!
Prices incl. VAT;
Galvanized doors for Land Rover Defender from 1983-2016 in Land Rover series style
Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!
Prices incl. VAT;
CargoBear cross bars - Land Rover New Defender
Nakatanenga CargoBear cross bars There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.
Prices incl. VAT;
CargoBear - crossbar - for Mercedes G
Nakatanenga CargoBear - crossbar - for Mercedes G Who does not need an entire roof rack on his Mercedes G because he e.g. If you only want to install a roof tent on two crossbars, the CargoBear cross bars are ideal for that! They are structurally identical to the crossbars of the CargoBear Mercedes G roof racks and therefore also offer their advantages: made of a light and stable aluminum-magnesium alloy (AlMg3) high quality powder-coated (RAL 9005 - jet black) width: 1.505 mm (thereof 1.350 mm for the usable area) length: 120 mm completely made in Germany Since our CargoBear roof racks are modular system racks, you can upgrade two or three brackets to the full roof rack by purchasing the missing parts! Of course, numerous accessories can also be used for the CargoBear roof rack with the crossbars. Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm Measured from the gutter, the CargoBear is approx. 20cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all CargoBear 1 + 2 roof racks!
Prices incl. VAT;
Rear ladder for Mercedes G
Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, Aluminium, 6mm
Transmissionguard, Aluminium 6 mm, for Land Rover Defender TD4 90/110/130, from MY '07 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Prices incl. VAT;
Cable winch system for Lada Niva
Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see table below! ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! Technical specifications: Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts Transmission:3-stage planetary gearReduction: 166: 1 General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook TÜV for the following vehicle types: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2131 e2*KS07/46*0076* allM2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Thule Knebelmuttern, abschließbar
Thule toggle nuts, lockable Protect your roof racks from theft! The ideal addition to our Thule racks for Land Rover Defender and Land Rover Discovery 1 / 2 are the lockable toggle nuts.The set contains 4 tommy nuts with keyed alike stainless steel locks and matching keys. The locks are compatible with the Thule One Key System if other Thule products are used.
Prices incl. VAT;
A-pillar lamp holder Jeep Cherokee & ComancheLampenhalter A-Säule Jeep Cherokee & Comanche
A-pillar lamp holder Jeep Cherokee & Comanche The brackets allow the mounting of lights on the A-pillar of the Jeep Cherokee XJ and Jeep Comanche MJ, supplied in pairs, incl. blind rivet nuts. Ideal for this mounting location are compact LED lights with tightly focused illumination (thus minimizing reflections from the bonnet), we recommend the Vision-X Cannon LED driving lights here. The brackets are made of stainless steel and can also be supplied with a black powder coating - please select the desired variant below.
Prices incl. VAT;
VIAIR 400P - Mobile compressor 24 Volt
Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 24 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: stainless steel valves guarantee long-lasting and optimum shut-off times generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life anodised cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics the motors are protected against splash water and thus maximally resistant to corrosion an integrated, automatic overheating protection protects the longevity of the compressors CE marking. The VIAIR compressor kit model 400P has the following scope of delivery: 7.5 metre spiral air hose 2.5 metre battery cable with battery terminals Tyre inflator incl. pressure gauge Aluminium stand or plate Connection from stand to compressor by vibration-reducing silent blocks Replaceable air filter Battery cable with integrated fuse holder incl. 40 amp fuse three additional valve adapters a high quality carrying bag The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15 delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute max. air pressure: 10 Bar max. voltage: 24Volt max. current consumption: 15 amps max. ambient temperature for compressor operation: 70° Celsius min. ambient temperature for compressor operation: -40° Celsius max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. with on/off switch Dimension: length 28 cm / width 15 cm / height 19 cm Weight: 4,8 Kg Protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: - 0 to 2 bar - 3 min 00 sec. - 1 to 2 bar - 1 min. 35 sec. Tyre size 33 x 12.50 R15: - 0 to 2 bar - 4 min 20 sec. - 1 to 2 bar - 2 min. 05 sec. Tyre size 35 x 12.50 R15: - 0 to 2 bar - 5 min. 20 sec. - 1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note: We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.
Prices incl. VAT;
Mesh helmet bag
Mesh helmet bag Anyone who switches on their head for sports and outdoor hobbies wears a helmet. Whether you're cycling, rollerblading, kayaking, climbing, snowboarding or skiing, you can't go without a helmet. And this also applies when the helmet can be a bit of a nuisance during breaks or on the way to and from the sports centre due to its size and weight. With our helmet bag, there is always a fixed place for your head protection. The robust mesh material guarantees ventilation and quick drying, and dust and dirt are no problem either, as the mesh is easy to wash. In principle, this makes our helmet bag just as good as a quick and clean all-purpose bag or wet bag for everything that gets wet and dirty during sport and leisure activities: Running shoes, swimming gear or football equipment. Everything that goes in is in good hands. The mesh bag is pulled closed using a robust, sewn-in cord with stopper and can be attached to rucksacks, bags etc. using four clips with elasticated straps. The system is particularly suitable for our backpack with MOLLE system, for example. The clips can be flexibly inserted into the MOLLE slots on the rucksack, giving the helmet a fixed position and a firm hold. It does not always have to be carried in the hand and does not hang around on the chin strap, where it can easily get caught. The Nakatanenga helmet bag is practical and safe for all those who travel a lot for their hobby. And when the helmet is not in use, the mesh bag can be folded up to miniature size and secured with the attached Velcro loop.Available in grey coyote and black.
Prices incl. VAT;
VIAIR Tank Port Fittings Kit
VIAIR Tank Port Fittings Kit for Compressors Set of 5 pieces, for 200 PSI rated systems. Features: 2 1/4" NPT-Plugs 1/4" NPT Drain Cock 1/4" NPT Compression Fitting 200 PSI Safety Valve
Prices incl. VAT;
Dixon-Bate NATO coupling with E-approval mark
The Dixon Bate NATO Hitch: Your Robust Connection Professional with Road Approval! Are you looking for an extremely resilient and reliable trailer hitch for your 4x4 vehicle that can handle the toughest demands both off-road and on the street? Then the original Dixon Bate NATO Hitch is exactly the right choice for you! This powerhouse is not only proven for military purposes but, thanks to its E-certification mark, can also be used in civilian road traffic without requiring registration. Robustness and Functionality for the Highest Demands: This NATO hitch from Dixon Bate is designed for fixed mounting on your vehicle and offers you unsurpassed stability. Whether you're towing heavy trailers off-road or depend on an absolutely reliable connection for commercial use – you can count on this hitch. A special feature is its ability to rotate and lock. This provides you with maximum flexibility when coupling and uncoupling, even on uneven terrain, and ensures a secure connection while driving. The Advantages of the Dixon Bate NATO Hitch at a Glance: With E-Certification Mark: Thanks to the E-certification mark, this hitch is registration-free in many countries and legal for road use. This saves you tedious trips to the inspection office. Rotatable and Lockable: For maximum flexibility and safety during coupling and driving. For Fixed Mounting: Designed for permanent and stable attachment to numerous 4x4 vehicles. Extremely Resilient: Proven Dixon Bate quality for the highest demands. Universal Bolt Pattern: With a standard bolt pattern of 85 x 45 mm, it fits many common rear cross members and tow bars. Important Note on Installation: The hitch is delivered without mounting hardware. Please be sure to observe your vehicle manufacturer's specific guidelines for the correct and safe installation of the NATO hitch. When in doubt, consult a professional to ensure safety. With the Dixon Bate NATO Hitch, you equip your vehicle with one of the most stable and versatile trailer hitches on the market. Ideal for off-road enthusiasts, farmers, forestry operations, and anyone who doesn't want to compromise on towing capacity and safety. Get this proven classic for your vehicle now!
Prices incl. VAT;
Superwinch Tigershark 11.5 Winch
SUPERWINCH TIGER SHARK 11.5 The 12 V Superwinch electric winch Tiger Shark 11500 has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 11.5 electric winch has waterproof sealed relays for high electrical currents, allowing longer duty cycles.It is used for commercial recovery of rolling loads.Features: Rope speed: 5.7 - 0.6 [m/min]. Pulling force: 5.2 t Voltage: 12 V Weight: 42 kg Power consumption at full load: 410 A Scope of delivery: 1 x winch optional: 1 x steel cable 9.5 mm/ 25 m or plastic winch cable 10 mm/30 m - optional in orange or grey 1 x winch hook 1 x roller window 1 x relay box 1 x battery cable 1 x cable remote control
Prices incl. VAT;
Cargon net, nylon - 150x100 cm with tension buckles
Practical nylon cargo net Can be fastened almost anywhere with tensioning buckles, size approx.: 150 x 100 cm. Made exclusively for us in Germany. Material thickness: 3mm, mesh size: 45 x 45 mm, load capacity approx.: 400 kg, delivery colour: black. 14 lashing points, 150 cm long, with practical and stable ITW NEXUS quality strap buckles for maximum hold and at the same time quick and easy fixing. Knotless net and chained net end ensure durability even with heavy loads. Material: 100% nylon Illustration similar Optional: set of 10 belt staples for mounting the net. The net is also available in other sizes on request.
Prices incl. VAT;
Montagepauschale Seilwindenbundle
Professionelle Montage für Seilwindenbundles Montagepauschale für die Nakatanenga Seilwindenbundle in unserem Hause. Sonderwünsche (Remote-Windenschalter, abgesetzt montierter Relaiskasten etc.) werden separat berechnet. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
VIAIR Compressor Kit - Escapade Constant-Duty Ultra Compact, 12V, for fixed installation
Escapade Constant Duty Compact Onboard Air System For up to 37″ TiresP/N 50003 – 110/145 PSI – 150 PSI / 1.80 CFM VIAIR’s Escapade Constant Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 100% duty 450C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI Max. Working Pressure: 150 PSI Max. Amp Draw: 23-Amps Ingress Protection Rating: IP67 Dimensions: 9.38″L x 4″W x 6.75″H Net Weight: 12.5 lbs. FEATURES 450C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) Extruded Aluminum Air Tank (1) Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) Tire Inflation Gun with 160 PSI Gauge (1) 30ft. Coil Hose with Quick Connect and Stud (1) Rubber Tipped Blow Gun (1) Quick Connect Coupler (Pre-installed) (1) 1/4″ 175 PSI Safety Valve (Pre-installed) (1) 1/4″ NPT Plugs Kit (Pre-installed) (1) 1/8″ Drain Cock (Pre-installed) (1) 1/4″ NPT to 1/8″ BSP Adaptors (2) Air Filter Housing w/ Replacement Air Filter Elements (1) 20ft. Freeze Resistant 12-Gauge Wire w/ Inline Fuse Holder (1) FILL RATES31″ X 10.5″ 0 to 30 PSI 4 min. 05 sec. (±10 sec.)15 to 30 PSI 2 min. 10 sec. (±05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 30 sec. (±15 sec.)15 to 30 PSI 2 min. 50 sec. (±05 sec.)35″ X 12.5″ 0 to 30 PSI 6 min. 55 sec. (± 15 sec.)15 to 30 PSI 3 min. 30 sec. (± 10 sec.)37″ X 12.5″0 to 30 PSI 7 min. 56 sec. (± 15 sec.)15 to 30 PSI 4 min. 09 sec. (± 10 sec.) Please Note: Use thread sealant for proper installation. Thread tape is not recommended.Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
Prices incl. VAT;
Module for 12 Volt AUTOTERM parking heaters
Module for 12 Volt AUTOTERM parking heaters With this module and a suitable radio remote control, you can control AUTOTERM (Planar 2D12 and Planar 44D12) parking heaters. You need the module to assign the parking heater to a channel of a radio remote control. You can thus switch the parking heater on and off by remote control. A connection diagram is included in the scope of delivery.
Prices incl. VAT;
VIAIR 6ft. Portable Compressor Air Extension Hose for 70P, 77P, 85P, 87P und 88P compressors
6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P. Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck
Prices incl. VAT;
CargoBear 2.0 system roof rack for Land Rover New Defender 110 from 2020 onwards
Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating Further keywords for this item: cargo-bear, cargobear, CargoBear, roof-rack, roof rack
Prices incl. VAT;
Additional bracket for Dixon Bate Hitch
More options for your Dixon-Bate: Standard additional slides Ships without safety pin. Safety pin available here.
Prices incl. VAT;
Dropside bushing 25.4mm for the intake of the AUTOTERM (=Planar) parking heater
Dropside bushing 25.4mm for the intake of the AUTOTERM (=Planar) parking heater Side panel bushing for all AUTOTERM parking heaters with an intake pipe diameter of 25.4mm (AUTOTERM Air 4D & AUTOTERM Air 2D).Please note:When installing the parking heater, you must observe the general wading depth of the vehicle. Depending on the placement of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!
Prices incl. VAT;
Tank protection plate for Land Rover Defender
Robust tank protection for your Land Rover Defender The tank protection plate for the Land Rover Defender 90/110/130 of the Td5 and Td4 series (2.4 and 2.2) protects the entire width of the tank from dents, damage and leaks during off-road use. This prevents vehicle downtime and costly environmental damage. The tank protection plate can be used in conjunction with standard trailer couplings. It is made of weight-optimised, 6 mm thick, anodised aluminium. Please select your vehicle type below.
Prices incl. VAT;
U-POL RAPTOR dye 500 ml for 5 l / Can be dyed, for all RAL colours
Colouring agent for RAPTOR dyeable 500 ml of colourant is sufficient for 5 litres of RAPTOR Liner. Any RAL colour can be mixed. For example, in conjunction with the following RAPTOR articles:- U-POL RAPTOR coating - 1 bottle kit, coating and hardener, colourable- U-POL RAPTOR Coating - 4 bottle kit- RAPTOR Liner 5LPlease state the desired RAL colour in the order text when placing your order.
Content: 0.5 liters (€118.00 / 1 liters)
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, galvanized steel, 4mm
Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
CargoBear bracket for large auxiliary headlights
Bracket for large auxiliary headlights For driving lamps and Vision-X Cannon, stainless steel, black powder-coated.Delivery without headlights, price per piece.- Suitable for all Nakatanenga CargoBear 1 + 2 roof racks!
Prices incl. VAT;
Anhängerkupplung Discovery II
Trailer coupling for Landrover Discovery II incl. E-kit, E-approved and ball head.
Prices incl. VAT;
Off-Road Accessories at Nakatanenga: Your Vehicle, Your Rules – Perfect it for Every Adventure!
Your 4x4 is more than just a means of transport – it's your partner for freedom, discovery, and unforgettable moments off the beaten path. To ensure you can enjoy every tour optimally prepared and with maximum performance, safety, and comfort, our comprehensive main category "Accessories" offers you a carefully selected variety of products that will take your vehicle to the next level.
Discover Exactly What You Need – Our Accessory Categories in Detail:
We've structured our accessories clearly for you, so you can quickly and easily find the right components for your vehicle and your individual requirements:
- Attachments: Add more functionality and an individual look to your vehicle. Here you'll find everything from robust trailer hitches (like NATO hitches) and tow bars to snorkels for safe water crossings, as well as specific mounts and attachments that perfectly fit your vehicle model and expand its capabilities.
- Recovery: Be prepared for emergencies and help yourself and others out of tricky situations. Our selection includes powerful winches (electric or manual), high-quality winch accessories, extremely durable recovery straps, kinetic ropes, tree trunk protectors, shackles, snatch blocks, and indispensable sand tracks, recovery boards, or waffle boards.
- Auxiliary Heating: Enjoy comfort and warmth, no matter where you are or what the weather is like. With a reliable auxiliary heater, you ensure pleasant temperatures inside your vehicle or roof tent, even in frost and cold. Perfect for winter camping or chilly nights in the mountains.
- Roof Racks: Expand your storage space and safely transport what you need for your adventure. Discover modular roof rack systems, platforms, crossbars, and a variety of specific accessories for attaching roof tents, transport boxes, jerry cans, sports equipment, and much more.
- Compressed Air: More than just hot air! With powerful compressors (fixed or portable), you can not only bring your tires back to road pressure after an off-road drive but also operate air tools or clean your equipment. Accessories like tire pressure gauges and air hoses complete the range.
- Interior Equipment: Design the interior of your vehicle to be functional, comfortable, and tailored to your needs. This includes seat covers for added protection and comfort, practical center consoles, organizer systems, drawer systems, and other accessories that make long journeys more pleasant and ensure order.
- Organization and Load Securing: Keep your equipment secure and within reach! Discover robust alu boxes, impact-resistant transport boxes, flexible lashing tracks and airline systems with matching fittings, modular MOLLE bags and panels, as well as the brilliantly simple Quick Fist mounts for tools and equipment.
- Protection: Shield your vehicle from the rigors of off-road terrain. Sturdy skid plates for the engine, gearbox, and tank, resilient rock sliders and side steps, robust bumpers (front and rear), differential guards, and fender flares protect your vehicle from damage.
- Tools: Be prepared for repairs and maintenance work on the go. Here you'll find selected hand tools, specialty tools for off-road vehicles, tire repair kits, multi-tools, and everything you need to fix minor problems yourself.
Nakatanenga – Your First Stop for High-Quality Off-Road Accessories:
- From Practice, For Practice: We test many of our products ourselves under the toughest conditions. You only get what has proven itself.
- Expertise and Advice: Our team consists of passionate off-road drivers. We advise you individually and work together to find the best solution for your requirements.
- Quality You Can Rely On: We rely on renowned brands and develop our own products that meet the highest standards.
- Comprehensive Range: From the smallest screw to complete expedition equipment – you'll find it here.
Equip yourself now at Nakatanenga with the best accessories and get your vehicle ready for unforgettable off-road experiences. Your adventure begins with the right gear!