Ähnliche Artikel
Steering drop arm puller - for Defender This item was designed to remove the handlebar arm from the steering box. The Defender steering drop arm can wear because of its position low down at the front of the chassis — it’s exposed to all the road spray and water that gets thrown at it. Water gets into the joint and eventually you will have to replace the drop arm and ball joint because the rust has corroded it. However splitting the steering drop arm from the steering box can be problematic because the steering drop arm and the steering box splines corrode together. This tool solves that problem. Supplied with a spare threaded bar.
Prices incl. VAT;
Das könnte Sie auch interessieren
Replacement universal joint for heavy duty propshaft with 25° articulation angle. All spare parts available off the shelf. Made in Germany!
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - front axle for 90/110/130 Td5/Tdi Heavy duty front prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90/110/130 Td5/Tdi front axles. For all other Defnder or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only!
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - front axle for Defender 90/110/130 Td4 from model year 2007 Heavy duty front prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits front axles on all Defender 90/110/130 Td4 from MY07. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 90 Td5/Tdi from model year 2007 onwards Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90 Td5/Tdi up to MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 90 Td4 from model year 2007 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90 Td4 from MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 110 Td4 from model year 2007 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 110 Td4 from MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 110 Td5 (P38) model year 2002-2006 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 110 Td5 from MY02 to MY06 with P38 rear axle. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Heavy Duty Cardan shaft - Land Rover Defender Tdi / Td5 Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly, for Land Rover Defender. GKN double joint prop shaft, fits Defender 90/110/130, for Tdi and Td5 up to MY07, with flange assembly. This heavy duty prop shaft is recommended for vehicles with body lift or as a replacement for a failed prop shaft. For steady, smooth driving even with high articulation angle. Comes with suitable flange assembly with seals etc. for transfer case.
Prices incl. VAT;
Heavy Duty Cardan shaft Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly for Defender 90/110/130, Td4 from MY07. This heavy duty prop shaft is recommended for vehicles with body lift or as a replacement for a failed prop shaft. For steady, smooth driving even with high articulation angle. Comes with suitable flange assembly with seals etc. for transfer case.
Prices incl. VAT;
Propshaft Wrench 9/16"
€39.00
Prices incl. VAT; / Parcel shipping
Cardan shaft wrench 9/16” - special tool for cardan shaft assembly
When things get tight, this wrench comes into play: our cardan shaft wrench with a length of 150 mm and 9/16” wrench width is the ideal special tool for working on cardan shafts
Technical data:
- Length: 150 mm
- Outer diameter: 20 mm
- Drive: 1/2” square
- Width across flats: 9/16”