Adapter set for mounting the roof tent If the attachment points of the roof tent are directly on the feet of the roof racks, the adapter set offsets the attachment points and the roof tent can be mounted easily and safely. Scope of delivery: 2 pcs adapter plates2 pcs counter platesScrews Note:Sliding blocks and sliding plates are NOT included in the scope of delivery! Are only for better understanding shown in the pictures!The adapter plates are only suitable for beams where the beam foot does not include the crossbar.The carrier feet must NOT be machined in any case!

Ready-to-go roof tent: Evolution 2 Basic incl. accessories You are gently awakened by the sun's rays coming in through the rainproof skylight. You slept well, thanks to the comfortable mattress and the 3D mattress pad underneath. You look around - there is enough space, no mosquitoes or other bugs buzzing around. You open the entrance and get your shoes out of the net attached to the floor of the tent to climb down the ladder. This is your adventure, this is where you want to be! For how long? - That's up to you. Your vehicle will take you anywhere and with the Roof Lodge Evolution 2 rooftop tent you have all the freedom to stay or travel on! Your trip, your experiences, your freedom - no one can take that away from you! For shipping reasons, the stated shipping weight differs from the actual weight. You are not sure whether a roof tent can be mounted on your vehicle? We are happy to support and advise you! So far we have found the perfect solution for almost every vehicle.Just contact us at: ☎ +49 9181 / 466 644 or write us. Roof Lodge Evolution 2 - 140 / 165 Extended  The equipment at a glance Tent skin: 320 g/sqm polycotton, PU-coated; the darker fabric of the tent skin allows a restful sleep even in the morning hoursSun sail: 280 gsm polycotton, metal-coated; due to the comparatively heavy quality, significantly less fluttering noise2 roof windows with rain and mosquito protectionOutward curved poles for better water drainageGround tent made of 280 g/sqm polycotton, metal coated - 165: adaptable to a tent mounting height of approx. 170 cm to 210 cm- floor area approx. 180 cm x 200 cm- 140: tent mounting height of approx. 200cm- floor area approx. 160 cm x 200 cm- floor pan made of PVC fabric- Stable protective cover made of PVC fabric (similar to truck tarpaulin)- 4 side walls; window and entrance door with close-meshed mosquito net Thermoplastic honeycomb floor; German brand productone-piece mattress (60 mm thick); available in two hardnesses; manufacturer: Saar-Schaum, Germany- standard mattress: recommended for persons up to 100 kg or those who like to lie softly- hard mattress: recommended for persons over 100 kg or those who like to lie hard3D mattress base (10 mm thick) for restful sleep; the base prevents condensation.fine-mesh mosquito protection on all windows and the entrance Additionally included with the tent: Aluminum ladder for a mounting height of the tent up to 2 meters incl. Nakatanenga compensating feet; adaptable to the vehicle height (and extendable with an optionally available ladder extension)Stable protective cover made of PVC fabric (similar to truck tarpaulin)LED tent lighting2x Nakatanenga travel pillows6x spring steel polesMounting material and required toolsThe supplied mounting material is used to mount the tent on standard crossbars with a width of up to 120 mm. If you have a different mounting situation, please contact us - we will be happy to provide you with alternative mounting options.pre-drilled mounting rails, which can be shortened according to the mounting situation (for details please refer to the enclosed detailed mounting and maintenance instructions)Roof tent net for shoes and small items (mounted on the front underside of the honeycomb floor). Features: Lying surface: 140 cm x 240 cm (140) / 165 cm x 240 cm (165) ; Height: approx. 120 cmPacking size: 143x124x40 cm (140) / 168x124x40 cm (165)The height of the folded tent is about 45 cm. This measurement is composed of the height of the mounting rails, the height of the folded tent and the height of the ladder lying on the tent. The ladder can be dismantled if necessary (keyword ferry).Can be mounted on off-road vehicles and also passenger carsMaterial: 65% polyester / 35% cotton (tent skin, sun sail & ground tent)Material: 100% cotton (mattress cover) And by the way: Since we naturally apply only the highest standards of material and workmanship to our own Nakatanenga roof tents, they have been manufactured only in-house for many years. As a result, absolutely every step in the process goes through additional quality control. Every tent that is marked with green delivery status in the store can also be picked up from us at short notice by appointment. Further keywords for this item: roof lodge, roof loge rooflodge, roof tent, roof-lodge, roof-tentWe will be happy to advise you: ☎ +49 9181 466 644  

Ready-to-go roof tent: Evolution 2 Basic incl. accessories You're woken up by the rays of the morning sun shining through the rain-proof roof-top window. You've slept well thanks to the comfortable mattress and the 3D mesh underneath. You're having a look around - there is plenty of space, no mosquitos or other insect that are flying around. You open the entrance and get your shoes out of the separate storage net to begin your descent.  That's your adventure. That's exactly where you want to be! For how long? That's up to you. Your vehicle gets you everywhere and the Nakatanenga Roof Lodge Evolution roof tent gives you all the freedom to stay or to travel onwards! Roof Lodge Evolution 140 Basic Features tent outer fabric: 320 g/sqm Polycotton, PU coated; the darker fabric allows for long sleep through the morning hours awning: 190T nylon fabric, nomad, PU coated; the relatively heavy weight minimizes fluttering noise 2 roof windows with rain and mosquito protection ground tent: - adjustable for tent mounting heights from about 170 cm to 210 cm- base area: 140 cm x 120 cm- floor pan PVC fabric- durable cover made of PVC fabric (similar to lorry canvas covers)- 4 side skirts; window and entrance with close-mesh fly sheeting- the lighter fabric allows outside light to enter the awning thermoplast honeycomb floor; made in Germany once-piece matress (60mm thickness); available in two degrees of hardness, manufacturer: Saar-Schaum, Germany separate 3D base mesh (10mm thickness) for relaxing sleep; the mat prevents condensation close mesh mosquito fly sheeting on all windows and entry  Additionally supplied with: aluminium ladder for a tent mounting height up to 2 metres, adjustable to vehicle height (optional extension available) hard-wearing protective cover made of PVC fabric (similar to lorry canvas covers) 2x LED interior light 2 Nakatanenga travel cushions 8 flexible steel poles fitting material and necessary toolsThe supplied fitting material allows fitting to standard roof bars with a width of up to 45mm. Should you plan to fit differently please contact us in advance - we can help you with alternative fitting scenarios. pre-drilled mounting rails, to be cut to length according to your requirements (instructions in the supplied fitting instructions) Size and Weight sleeping size: 140 cm x 240 cm ; height approx. 120 cm pack size: 147x124x40 cmThe height of the folded tent is about 45 cm, being the sum of the mounting rails, height of the folded tend and the height of the ladder that rests on top of the folded tent. The ladder can be detached from the tent (e.g. when overall height is important like on ferries, etc. weight of tent: 45 kg (incl. protective cover, ladder, mounting rails) can be fitted to vehicles (also passenger cars) with a mounting height up to 2.10 m Information on the subject of roof loads can be found in the manuel / data sheet tab. Further keywords for this item: roof lodge, roof loge rooflodge, roof tent, roof-lodge, roof-tent We will be happy to advise you: ☎ +49 9181 466 644