Vehicle accessories
CargoBear connector for headlight holder
Connecting piece for headlamp holder Can be used laterally or centrally (see technical drawings). Suitable for universal accessories such as light bars.Supplied without side brackets, which are necessary for mounting, and without headlights.The mounting points of a light bar can be up to 400 mm apart in order to be attached to the connector.ATTENTION: The article only fits the Nakatanenga CargoBear Defender 1 + 2!
Prices incl. VAT;
LED Indicator relay 12V for Land Rover Defender
Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.
Prices incl. VAT;
Fitting Kit Headlight for Land Rover Defender, stainless steel
Fitting Kit Headlight for Land Rover Defender, stainless steel Fitting kit for one headlight for Land Rover Defender, consisting of stainless steel screws and anti-seize paste.
Prices incl. VAT;
Jackall service kit for Jackall
Everything you need for maintenance: With the service kit, you can get your Jackall jack back into top shape - for reliable operation and maximum service life. Contains all the necessary wear parts for easy maintenance.
Prices incl. VAT;
Seal Vent Flap Land Rover Series III and early Defender 90/110/130
High-quality seal for the ventilation flaps on Land Rover Series III and Land Rover Defender up to and including model year 2006 In contrast to the original parts made of foam rubber, this is a fully-fledged sealing material. The seals give way slightly over time. You can (re)glue them in with a PU adhesive. Scope of delivery: 1 piece
Prices incl. VAT;
Spare parts kit for parking heater
Spare parts kit for mobile parking heaters. To ensure that your parking heater remains watertight, you will receive the common wear parts here. Set consists of: 3x rubber plugs 2x O-rings 2x thread caps 1x storage bag
Prices incl. VAT;
Temperature sensor / probe for AUTOTERM (=Planar) parking heaters
The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.
Prices incl. VAT;
tank-mounted fuel intake pipe
Tank-mounted fuel intake pipe The 60 cm tank-mounted fuel intake pipe is perfect for our diesel heaters by Autoterm, but will also suit most other products like Webasto or Eberspächer. It will work with both diesel and gasoline on either air or water heated systems and it doesn’t matter whether your tank is plastic or metal. To fit the intake pipe, it is generally necessary to remove the fuel tank and its fittings. After drilling a hole for the intake pipe, the connector head has to be countered with a nut from the inside. That’s why access to the tank’s interior through the intake opening is a must. The flexible riser pipe can be bent into any shape, making it easy to determine the extraction level for the heater. Make sure that the opening of the pipe doesn’t reach all the way to the bottom of the tank, otherwise you’ll risk complete emptying of your fuel tank and the unwanted intake of dirt particles or tank sludge. The tank extraction is ideally suited for our Planar parking heaters.
Prices incl. VAT;
Anti seize paste, 250g
High-performance assembly paste 250 g - for brakes, threads & metal connections 1x Anti seize paste for universal use, 250 g. heat resistant up to 1100 ° C, high pressure resistant and lead free prevents corrosion and galling resistant to alkalis and acids universally applicable for assembly, screwing and as lubricant against seizure and protection of screw threads, link tools, rotary axes, etc.
Content: 0.25 kilograms (€80.00 / 1 kilograms)
Prices incl. VAT;
Lashing rail fitting, double stud
Lashing rail fitting, double stud Double stud fitting for airline cargo lashing rails, load capacity 1,100 kg, ring diameter 40 mm, manufactured according to ISO 9788, galvanised steel, UV and salt water resistant.Please note: The studs are delivered either in yellow passivated or silver passivated, depending on availability.
Prices incl. VAT;
Factor 55 Winch Lock Assembly
Factor 55 Winch Lock Assembly The 3 / 8-16 in. Winch lock screw is made of 1045 carbon steel. Thanks to the 60 degree head, the screw can't be removed with ordinary screwdrivers, pliers or commercially available safety inserts. Simply replace your winch mounting bolts with the Factor 55 Winch Locks and your winch is optimally protected against theft! As a replacement for any easily removable 3 / 8-16 " lock screw. The locking screw can be attached to any 1987 - 2014 Jeep YJ, TJ, JK or JL Wrangler with a mounted winch. ✓ Winch Lock✓ Heat Treated 1045 Carbon Steel✓ Zinc Chromate Corrosion Protection✓ Hidden Spring Lock Washer Pocket✓ 60 Degree Head Taper to Prevent Removal with Pliers✓ Simple Fail Proof Design✓ 3 Inches by 3 Inches by 1 Inch, 1 Pound✓ Universal Application for Any Jeep Wrangler
Prices incl. VAT;
Mike Sanders Corrosion Protection Grease 750 gr
Can of Mike Sanders Anti-Corrosion Grease - 750 g Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 0.75 kilograms (€26.67 / 1 kilograms)
Prices incl. VAT;
Wear kit with tank extraction and exhaust pipe for AUTOTERM Air 2D / 4D
Wear kit with tank extraction and exhaust pipe for AUTOTERM Air 2D / 4D For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. After assembly, we are usually left with unused accessories and spare parts from the original AUTOTERM delivery, so we decided to bundle them as wear and tear replacement kits for only 20 € incl. VAT. That’s a massive price reduction of nearly 70% when compared to the individual value of these spare parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel pick-up tube, one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.
Prices incl. VAT;
Rubber moulding for ExRoof roof rack
Rubber moulding for ExRoof roof rack The rubber moulding is suitable for every T-slot of the ExRoof roof rack, except for the HEXSLIM model (all-round frame) on the underside. It acts as a wind deflector at the front and thus reduces noise. It also acts as an anti-slip insert on the surface to stow loads such as transport boxes more securely. The rubber moulding must be cut into pieces for installation on the ExRoof in the direction of travel. Technical details: Length: 146 cm
Prices incl. VAT;
Quickfist micro, pack of 4, clamping range 15-22mm
Quick Fist micro tool holder Can accommodate objects 15-22 mm in diameter. Each holder has a reliable load capacity of 6 kg. Ideal for thin handles such as flashlights, tools, fishing rods and much more. Tested according to AfPS GS 2014: 01 PAK: suitable for long-term skin contact Simple assembly with a screw that is attached in the middle Scope of delivery: 4 pieces Quick Fist Micro Tool Holder
Prices incl. VAT;
Quick Fist Tool Holder Mini-i
Quick Fist Mini-i - Tool holder 2-pack 2-pack, clamping range 16 to 35 mm, max. 11 kg per holderQuickfist holders - robust, flexible, versatileQuickfist mounts provide a reliable hold for your equipment - even under the toughest conditions and in rough terrain. They hold objects securely and shake-proof, even in the event of strong vibrations or on uneven terrain.Available in different sizes and with a high load capacity, the holders are suitable for a wide range of equipment - from tools to outdoor equipment.Made from durable, corrosion-resistant material, they remain dimensionally stable and elastic even in extreme temperatures. Whether for off-road vehicles, camping, outdoor use or in the workshop - Quickfist brackets are the ideal solution for any fastening task.Visit our Quickfist product page for more examples of use for this clever holder.
Prices incl. VAT;
Winch Hook - rated up to 2000kg - For 7-8mm Winch Cable
Robust Winch Hook from Nakatanenga: 2000kg Load Capacity for 7-8mm Steel Cables – Safety in Every Recovery In demanding off-road use, forestry work, or agriculture, reliable recovery equipment is essential. A critical component of every winch is the winch hook, which establishes the connection between the winch and the anchor point. The Nakatanenga winch hook, with an impressive load capacity of 2000kg and specifically designed for steel cables with a diameter of 7-8mm, offers the safety and robustness you need in critical situations. High Load Capacity for Demanding Tasks With a maximum pulling load of 2000 kilograms (equivalent to 2 tons), this winch hook is a real powerhouse. It is designed to reliably withstand even demanding recovery operations or heavy pulling tasks. This high load capacity makes it a versatile tool for a wide range of vehicles and winches operating within the specified cable diameter range. Optimized for 7-8mm Steel Cables The specific design for steel cables with a diameter of 7 to 8 millimeters ensures an optimal fit and power transmission. This is crucial to ensure a secure and positive connection between the cable and the hook. Correct sizing also prevents unnecessary wear on the cable and the hook itself, thus contributing to the longevity of your entire winch setup. Robust Construction for Maximum Durability Made from high-quality, durable material, the Nakatanenga winch hook is designed to withstand the highest loads and harsh off-road conditions. The robust construction ensures a long service life, even with regular use in adverse weather conditions, mud, or contact with stones. A resistant surface coating also effectively protects against corrosion. Safety First – The Integrated Safety Latch An indispensable feature of this winch hook is the integrated safety latch (also known as a safety catch or gate). This mechanism reliably prevents the unintentional unhooking of the cable, recovery strap, or anchor point during winching operations. This is a crucial safety factor that minimizes the risk of accidents and enables a controlled recovery process. Versatile Applications Although perfect for off-road vehicle recovery, this winch hook also finds application in other areas. In forestry for skidding logs, in agriculture for pulling tasks, or for general tasks requiring the use of a winch with a 7-8mm steel cable, this hook provides valuable service. Nakatanenga – Quality You Can Rely On Nakatanenga stands for field-tested and durable off-road equipment. This winch hook seamlessly fits into this quality promise and has been developed to meet the high demands of off-road enthusiasts and professional users. The Nakatanenga winch hook with a 2000kg load capacity for 7-8mm steel cables is more than just a connecting piece. It is a guarantee for safety, reliability, and durability in all your winching operations. Invest in quality that pays off in the decisive moment and equip your winch with this robust hook from the Nakatanenga off-road shop.
Prices incl. VAT;
HD Vibration isolator set for all VIAR compressors with base plate
HD vibration isolator set for all VIAR compressors with base plate When mounting VIAIR compressors with a base plate in your vehicle, we recommend using our heavy duty vibration dampers, as the rubbers on the original ones tend to wear out relatively quickly. The rubber absorbers reduce the compressor’s vibrations and guarantee significantly quieter operation.Fastening material is included.
Prices incl. VAT;
Control panel PROFI 2 for Cubbybox
Switchboard PROFI 2 for Cubbybox New control panel Cubbybox Land Rover Defender made of high quality aluminium with 3 Profi switches with green LED lighting, circuit breaker and voltmeter for independent testing of 2 different batteries, cigarette lighter with socket, rubber cover and fuse, 190 x 132 mm.
Prices incl. VAT;
Nakatanenga rim reinforcement for splash guard holder
Nakatanenga rim reinforcement for splash guard holder Edge reinforcement for splash guard holder, for Land Rover Defender 110.Dimensions of a single edge reinforcement: 10 x 2.3 cm. Supplied in pairs.
Prices incl. VAT;
Side wall duct Auxiliary heater intake / exhaust 24mm
Stainless steel side panel feed-through for auxiliary heating - intake/exhaust 24 mm A dimensioned drawing can be found in the data sheet tab. Length of the tube: 25 mm Suitable for AUTOTERM (=Planar) 2D Consisting of: Disc with VA pipe The side wall bushing is now supplied in a new, more compact version. This provides better installation options where space is limited. Please note: When installing the parking heater, you must take the general wading depth of the vehicle into account. Depending on the position of the parking heater intake, the wading depth may vary for the individual vehicle. Please also observe the instructions of the parking heater manufacturer!
Prices incl. VAT;
Cable Organizer
Practical cable organizer More and more technical devices accompany us in everyday life. Since these need electricity, we have not only the devices but also all the necessary cables (charging cable for mobile phones, laptops and tablets, cables for a power bank, etc.). No matter how neatly you roll the cables together and no matter how carefully you are there, after only a short time the cables in the bags, suitcases, rucksacks, stonework or the like are loosened again, knotted or simply untraceable. Once opened, the cables meander their way, criss-crosses and are often kinked. This often causes a cable break. And this not only causes loading errors or data transmission errors, but is also a source of danger. This cable organizer helps. It has room for 4 cables which you can finally keep neatly. You can also remove the individual buckles if necessary. On each buckle an elastic band is attached to fix the cables. In addition to the four storage options is a 5x5 cm hook tape. The Organizer can be easily rolled up and then fixed with the Velcro piece on the back loop tape. You can also attach the Organizer in full length to another Velcro surface. Dimensions (length x width):37x5 cm Material:100% nylonCable holder: Dekal / ITW / Duraflex
Prices incl. VAT;
U-POL RAPTOR Adhesive Promoter Can
RAPTOR Adhesive Promoter Can U-POL offers a full range of additional products for the preparation, use and optimization of your RAPTOR application. Promotes paint adhesion on most automotive surfaces such as plastic, aluminum, galvanized steel, zinc, painted surfaces, fiberglass and also on smoothed surfaces.There is no need to sand down surfaces in hard-to-reach areas (such as under bonnets or trunk lids). Excellent adhesion properties: sprays flat can be painted over with most water- or solvent-based paint systems serves as a protective layer against peeling and protects against damage from solvents
Content: 0.45 liters (€42.22 / 1 liters)
Prices incl. VAT;
U-POL Etch Primer - 450ml
U-POL Acid adhesion promoter - 450 ml spray for RAPTOR coating & corrosion protection1x 450 ml spray can The phosphoric acid ester formula promotes adhesion of Raptor Multipurpose Coating to difficult substrates such as galvanised steel and aluminium.U-Pol Acid creates an anti-corrosion barrier that prevents rusting of steel.Please note: This item cannot be shipped to Switzerland or third countries!Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackRaptor coating examples:
Content: 0.45 liters (€42.22 / 1 liters)
Prices incl. VAT;
Sun visor organizer Version 2.0
Where to go with all the little things in the vehicle? There is more storage space here! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle. The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, ballpoint pens, notepad, small flashlight, multitool etc. The organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Integrated zipped pocket and MOLLE loops. Width of the organizer is 290 mm. Material: 100% nylon The Nakatanenga sun visor organizer is available in different colors: green-brown coyote sand Universally applicable for all vehicles! You can find the Nakatanenga card holder here. You can find the matching mirror for the organizer here.
Prices incl. VAT;
Housing for remote control Land Rover Defender
Only the most hardened purists would welcome a return to the times before central locking. Let’s be honest, we’ve all become too spoiled. A Landy with central locking is better than one without. Our replacement case for the key fob is meant to replace the original one when the the buttons are faulty or the shell too worn out from use. Simply install the electronics from the original remote in the new key fob case and attach to your key ring. New programming is not required. Suitable for Land Rover Defender with separate remote control, incl battery CR2032. Except for remote controls with the following form:
Prices incl. VAT;
Cup holder for Cubbybox
Replacement cup holder for Cubby Box. If your cup holder of your Cubby Box breaks, the cup holder is available as a spare part from us. 0.5 l drinks bottles and coffee cups fit perfectly into the practical cup holder. Also ideal for self-made center consoles.
Prices incl. VAT;
U-POL Universal Adhesive Primer Spray - 450ml
U-POL Universal Adhesive Primer Spray - 450ml 1x 450 ml spray canUniversal adhesion promoter for paints, adhesives and sealants. Ideal for all automotive surfaces such as plastics, aluminium, fibreglass, galvanised and painted surfaces. Can be overcoated with any water or solvent based surface coatings - e.g. Raptor multi-purpose coating.Please note: This item cannot be shipped to Switzerland or third countries!Why the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:
Content: 0.45 liters (€42.22 / 1 liters)
Prices incl. VAT;
Spare Fuse 425 Amp
Maximum safety & reliability - 425A replacement fuse for cable winch Winch replacement fuse with 425 amps
Prices incl. VAT;
U-POL 1K Plastic Bonding Agent - 450ml
1K Plastic Bonding Agent - 450ml 1x 450 ml spray canIdeal for prep work on all plastics prior to painting - before applying Raptor Multi-Purpose Coating.Provides effective adhesion to difficult plastics such as olefin-based thermoplastic elastomers.Please note: This item cannot be shipped to Switzerland or third countries!Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop: colourable, black, whiteExamples of the Raptor coating:
Content: 0.45 liters (€42.22 / 1 liters)
Prices incl. VAT;
Security Mounting Kit for Nakatanenga Window Grille
Optional safety mounting kit for the Nakatangena window grilles for the Land Rover Defender 90/110 Consisting of:Blind rivet insert nuts, safety torx screws and matching bit Kit for one window grille
Prices incl. VAT;
Clinometer / gradiometer Lev-o-gage 201F
Precise inclination measurement - simple & reliable Inclinometer for the range of 0-45° (scale in 5° increments), for mounting in the cockpit in the transverse or longitudinal direction, precisely indicates the inclination of the vehicle. The protractor is ideal for demanding off-road use or for aligning the vehicle - e.g. when using a roof tent. It is mounted using the high-quality adhesive tape. The inclinometer is made of high-strength plastic and is filled with liquid, ideal for off-road, 4x4, boats, motorhomes and trucks. Dimensions: 89 mm x 41 mm, weight: approx. 28 grams.
Prices incl. VAT;
Off-Road Accessories at Nakatanenga: Your Vehicle, Your Rules – Perfect it for Every Adventure!
Your 4x4 is more than just a means of transport – it's your partner for freedom, discovery, and unforgettable moments off the beaten path. To ensure you can enjoy every tour optimally prepared and with maximum performance, safety, and comfort, our comprehensive main category "Accessories" offers you a carefully selected variety of products that will take your vehicle to the next level.
Discover Exactly What You Need – Our Accessory Categories in Detail:
We've structured our accessories clearly for you, so you can quickly and easily find the right components for your vehicle and your individual requirements:
- Attachments: Add more functionality and an individual look to your vehicle. Here you'll find everything from robust trailer hitches (like NATO hitches) and tow bars to snorkels for safe water crossings, as well as specific mounts and attachments that perfectly fit your vehicle model and expand its capabilities.
- Recovery: Be prepared for emergencies and help yourself and others out of tricky situations. Our selection includes powerful winches (electric or manual), high-quality winch accessories, extremely durable recovery straps, kinetic ropes, tree trunk protectors, shackles, snatch blocks, and indispensable sand tracks, recovery boards, or waffle boards.
- Auxiliary Heating: Enjoy comfort and warmth, no matter where you are or what the weather is like. With a reliable auxiliary heater, you ensure pleasant temperatures inside your vehicle or roof tent, even in frost and cold. Perfect for winter camping or chilly nights in the mountains.
- Roof Racks: Expand your storage space and safely transport what you need for your adventure. Discover modular roof rack systems, platforms, crossbars, and a variety of specific accessories for attaching roof tents, transport boxes, jerry cans, sports equipment, and much more.
- Compressed Air: More than just hot air! With powerful compressors (fixed or portable), you can not only bring your tires back to road pressure after an off-road drive but also operate air tools or clean your equipment. Accessories like tire pressure gauges and air hoses complete the range.
- Interior Equipment: Design the interior of your vehicle to be functional, comfortable, and tailored to your needs. This includes seat covers for added protection and comfort, practical center consoles, organizer systems, drawer systems, and other accessories that make long journeys more pleasant and ensure order.
- Organization and Load Securing: Keep your equipment secure and within reach! Discover robust alu boxes, impact-resistant transport boxes, flexible lashing tracks and airline systems with matching fittings, modular MOLLE bags and panels, as well as the brilliantly simple Quick Fist mounts for tools and equipment.
- Protection: Shield your vehicle from the rigors of off-road terrain. Sturdy skid plates for the engine, gearbox, and tank, resilient rock sliders and side steps, robust bumpers (front and rear), differential guards, and fender flares protect your vehicle from damage.
- Tools: Be prepared for repairs and maintenance work on the go. Here you'll find selected hand tools, specialty tools for off-road vehicles, tire repair kits, multi-tools, and everything you need to fix minor problems yourself.
Nakatanenga – Your First Stop for High-Quality Off-Road Accessories:
- From Practice, For Practice: We test many of our products ourselves under the toughest conditions. You only get what has proven itself.
- Expertise and Advice: Our team consists of passionate off-road drivers. We advise you individually and work together to find the best solution for your requirements.
- Quality You Can Rely On: We rely on renowned brands and develop our own products that meet the highest standards.
- Comprehensive Range: From the smallest screw to complete expedition equipment – you'll find it here.
Equip yourself now at Nakatanenga with the best accessories and get your vehicle ready for unforgettable off-road experiences. Your adventure begins with the right gear!