Optimum base for RAPTOR protective coating - with rust protection and adhesion reinforcement RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer aerosol specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces. It contains a blend of anti-corrosive additives to inhibit rust and corrosion.Easy and convenient - activate using the valve on baseNo need for spray equipment

RAPTOR Adhesive Promoter Can U-POL offers a full range of additional products for the preparation, use and optimization of your RAPTOR application. Promotes paint adhesion on most automotive surfaces such as plastic, aluminum, galvanized steel, zinc, painted surfaces, fiberglass and also on smoothed surfaces.There is no need to sand down surfaces in hard-to-reach areas (such as under bonnets or trunk lids). Excellent adhesion properties:    sprays flat    can be painted over with most water- or solvent-based paint systems    serves as a protective layer against peeling and protects against damage from solvents

RAPTOR is a robust, two-component polyurethane coating The 5 Litre RAPTOR tins are ideal for large areas such as trailers, floors, heavy equipment and full oversprays. Mix 3:1 (15 L of RAPTOR to 5 L of Hardener) to make more than 20 L of RAPTOR and cover approximately 60 m²Can be brush applied, rolled or sprayed through pneumatic or conventional HVLP spray equipment Features: TINTABLECan be tinted to match required colour.Also available in black. DURABLEProvides tough mechanical damage and stain resistant surface.Protects against rust and corrosion. U.V. RESISTANTDelivers a high level of fade resistance: WATER RESISTANTProvides a water resistant finish, keeping moisture out and reducing rust. RESITSTANTResistant against fuels, hydraulic oils, animal urine, salt water and more. QUICK & EASY TO USEEasy as Fill-Shake-Shoot.Provides excellent adhesion across many substrates.Can be applied with Schutz gun, HVLP gun, roller or brush. Certificates: FIRE RESISTANCERAPTOR has passed flammability testing for motor vehicles according to the test methods FMVSS 302,ISO 3795 & BS AU 169A. SLIP RESISTANCEWhen used with RAPTOR TRACTION Anti-Slip Additive it produces a finish meeting ASTM E303-93.

RAPTOR-LINER black or tintable The 5 liter RAPTOR canisters are perfect for large areas such as trailers, floors, heavy equipment and complete oversprays. - Mix in a ratio of 3: 1 (15 liters of RAPTOR to 5 liters of hardener), so that 20 sprayable liters of RAPTOR are created - sufficient for an area of around 60 m².- Can be applied with a brush or sprayed with pneumatic or conventional HVLP spray equipment.- Suitable for applications in the areas of vehicles, construction, seafaring, leisure, industry, agriculture and trade. The robust and tintable RAPTOR protective coating from U-POL is a two-component coating made of polyurethane, which provides surfaces with a protective layer.Properties:- Durable:Provides a surface that resists mechanical damage and is stain resistant.Protects against rust and corrosion. - UV-resistant:Characterized by high light fastness. - Waterproof:The result is a waterproof surface that keeps moisture away and prevents rust. - Resistant:Resistant to fuels, hydraulic oils, animal urine, salt water and more. - Quick and easy to useSimply fill, shake and spray.Ensures excellent adhesion on various substrates.Can be applied with a protective gun, HVLP gun, roller or brush.Certificates:Fire resistance RAPTOR has passed flammability tests for automobiles using the test methods FMVSS 302, ISO 3795 and BS AU 169A.When used with the RAPTOR additive for slip resistance, a surface is created that meets the ASTM E303-93 standard.Substrates and preparation: - Original paint- Polyester filler- SMC- Aluminum * - Most types of plastic * - Cataphoresis * - Bare metal * - Fiberglass-concrete * - Galvanized surfaces * - Glass fiber reinforced plastic- wood ** Some substrates require one before applying RAPTOR additional surface preparation. 

Performance is one thing and, as is well known, there is no mistaking the polyurethane coatings from RAPTOR: Long-lasting UV and rust protection and high resistance to chemicals of all kinds are guaranteed - provided they are used properly. But the RAPTOR look is of course not entirely unimportant. In addition to various textures from smooth to rough, extremely cool color combinations can also be achieved very easily. Our selection of original RAPTOR COLORS is specially tailored to the RAPTOR multi-purpose coating. There are no surprises or trial and error when mixing, using or with the result. The whole work process runs with the usual RAPTOR precision and the typically simple handling: Simply put the contents of a 45ml bag in the 1L bottle of coating, then add the hardener, shake for two minutes and get started. Detailed instructions on how to achieve different textures when spraying are included. Of course, as with any painting job, a color test is recommended. Available in the colors Beige, Light Brown, Sepia Brown, Green, Light Green, Pine Green, Orange and Olive. And another tip: since every RAPTOR COLOR color bag is precisely matched to a bottle of coating in terms of quantity, when ordering larger quantities, it may be cheaper to use our 4-bottle RAPTOR coating kit than with individual bottles. Reduced colors:  Only while stocks last

The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in a colourable version. Suitable for application:     Standard RAPTOR spray gun     RAPTOR spray gun with adjustable spray nozzle for better texture adjustment     Roll-on set (application via paint roller) We recommend preparing the substrate:     MIPA Etch-Primer     U-Pol universal etch primer spray     U-Pol etch primer     1K plastic adhesion promoter The RAPTOR coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please follow the application instructions in the instructions/data sheet.Why use the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface+ COLOUR CHOICE:The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery: - 1x 710 ml coating - 1x 240 ml hardenerClassification according to the CLP Regulation Symbols GHS02: Flame GHS07: Exclamation mark Signal word Danger! H-phrases H222 - Extremely flammable aerosol.H229 - Pressurised container: May burst if heated.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation. Safety instructions P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.P211 - Do not spray on an open flame or other ignition source.P251 - Do not pierce or burn, even after use.P280 - Wear eye protection, protective clothing, protective gloves.P337+P313 - If eye irritation persists: Get medical advice/attention.P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C. EUH phrases EUH204 - Contains isocyanates. May cause allergic reactions.EUH066 - Repeated exposure may cause skin dryness or cracking.Unknown acute toxicity (CLP) - SDS : 0.35% of the mixture consists of one or more component(s) of unknown acute toxicity (inhalation (vapours))

Now it is no longer necessary to spray with a compressor and spray gun - with our new Raptor Roll-On-Set you can now also apply the popular RAPTOR-coating by yourself without any problems! As an official distributor of the popular RAPTOR-coating we have come up with a simple DIY solution together with the official manufacturer U-POL: since the Raptor-coating, unlike other coatings, does not have to be heated, you can use this roll set. The roll-on set consists of:1x color roller bracket with ergonomic profile3x coarse foam structure rolls in top quality (Ø 35 mm)2x paint trays or paint trays with practical spout nose and integrated measuring strokes (15x32 cm)2x sanding pads for sanding the surface (1x with alumina grain type and 1x with silicon carbide grain type)2x disposable gloves Please refer to the instructions / data sheet for processing instructions.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, white, tintable, black Please note:The color of the tub and the paint roller bracket may differ. Examples of the Raptor coating:

U-POL RAPTOR spray gun for applying the coating   Spray gun for applying the coating, for screwing onto Raptor bottles.