Vehicle accessories

Nakatanenga CargoBear accessory holder for maximum traction Maximum Traction Boards are an extremely lightweight plastic alternative to conventional aluminum sandboards, a must-have for all serious off-roaders and expedition enthusiasts. If you have at least two CargoBear crossbars - or the entire roof rack - on the classic Defender (up to MY2016) or Mercedes G-Class, you can now install a robust and quickly accessible mount for the traction boards with little effort. The mount consists of a bracket set with two of our tried-and-tested CargoBear awning brackets (stainless steel) and special aluminium mounting plates for the traction boards. The awning brackets are simply screwed to the crossbars’ angled sides. All brackets are powder-coated in black. Screws and fastening material (stainless steel) - also for the traction board - are included.

Checker plate bonnet Land Rover Defender Td4 - plate on hump for Land Rover Defender from MY 2007, delivery includes rivets.The product is optionally available with anodised or black powder-coated surface, please select below.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Our radiator grille is the visual “icing on the cake” for the Defender front and replaces the standard plastic grille.   The black powder-coated aluminum grille is oval or square perforated and fits both Defenders with and without air conditioning.   The delivery includes a set of high-quality stainless steel screws for simple and permanent installation on the vehicle.  

Convenient rear door damper prevents the door from closing unintentionally Conversion kit for all Land Rover Defender 90 / 110 models up to MY2001 with rear door. Replaces the old adjuster with a specially designed soft-stop gas strut that slows the rate of travel as it reaches the end of its stroke. Keeps the door securely open, also with our rear crossmember spare wheel carrier. This is the improved version with the following added features: all fittings are stainless steel re-designed body tub bracket improved geometry - the gas strut can't be destroyed by accidental wrong fitting gast strut exclusively designed for us - changed characteristic curve, improved sealing for use in dusty conditions and soft-stop feature supplied with revised fitting instructions Note: Convenient tailgate dampers for all Land Rover Defender 90/110 models from model year 2002 onwards can be found here in the shop

Sun visors in your car offer few functions beyond the obvious: make-up mirrors for female passengers, maybe, or flimsy card holders for permits, IDs and similar items. We’ve been offering our popular and very successful universal visor organizers for quite some time now and they are the perfect solution to stack the humble visors with additional functions. If you are looking for great, custom-made organizers for both visors in a New Defender, look no further. Simply slip them on, fasten the Velcro straps, done! MOLLE mesh enables you to attach any MOLLE cases or similar compatible accessories. The bands can also hold sun glasses, pens or small flashlights. Two zipper pouches are perfect for all smaller items that are easily lost: coins, keys, remotes, swipe cards and a lot more. A great place to keep your vehicle documents, parking permits etc. is the dedicated slot on the side of the visor. And to top it all off, our textile studio has worked a lot of Velcro fleece into the organizer so that you can attach all kinds of smaller items. The trusted Nakatanenga sun visor organizer is tidy, versatile and allows for quick access to everything that’s important inside a New Defender! Available in the colors black, gray and coyote. Delivery in pairs for driver and passenger side.

Additional Interior Light for Land Rover NEW DEFENDER  The new Defender is being marketed as a true workhorse, but – as always – there’s room for improvement when it comes to the practicalities of working with your L663 on a day-to-day basis. One such aspect is definitely the lighting for the load space in the back. The standard set-up is somewhat sparse but most of all it lacks proper roof lights. This is especially problematic since the cargo area is often filled up or modified by installed racks, boxes and the like. Our LED light bar solves this problem with more than sufficient 396 Lumens light intensity. The lightbar is easily installed on the trim above the cargo door and illuminates the entire load space – helping you to quickly find tools and equipment and ensuring safe working conditions day or night. Mounting the roughly 36 cm long and 2 cm wide LED lightbar is really easy. Simply click the two fastening clips into the edge of the upper door trim. The clips’ custom-shape will hold the lightbar firmly in position. Connecting the device to the Defender’s wiring is just as quick by simply pushing the LED bar’s wire behind the trim and pulling it along the D-pillar towards the standard lamp housing by the fuse box. In most cases, you won’t even have to remove the trim panels. Lastly, the LED bar’s connector is simply plugged into the standard lamp’s socket. The bar is activated and deactivated as required by its own touch button. Dimensions: 362mm x 25 mm x 11mm 

Control element for Planar Autoterm air parking heater 12V 2D and 4D Comfort is when you don’t have to worry about life’s basics and feeling warm and cozy is definitely one of them, especially when camping, on a weekend trip or a 4x4 adventure. And since there is always too much on everyone’s to do list anyway, it’s a great relief when there’s at least one job you never have to worry about before you hit the sleeping bag or your bunk. That’s where the Comfort Control remote for Autoterm/Planar Diesel air heaters 2D and 4D comes in. Completely redesigned and greatly improved when compared to its predecessor, the Comfort Control activates and deactivates your heater based on timer and/or thermostat settings. Choose from three timer modes for recurring heating intervals, a power mode for constant output, ventilation-only modes e.g. for reducing air humidity inside your camper and last but not least the new thermostat mode. The latter was added due to popular request and allows for setting and maintaining comfortable temperatures by individual degrees centigrade. No more nights in the camper when it’s constantly either too cold or too hot. The new design is also much more comfortable and ergonomic. The OLED display, the multifunctional, non-slip rotary dial as well as two push buttons make selecting and setting the desired functions really easy. Navigating the menus is intuitive and straightforward and basic functions can be accessed directly with a shortcut button. Despite a bigger display and more functions, the  Comfort Control is actually smaller in size than its predecessor. With dimension of only 82 x 37 x 19 mm, you can hide it easily but you don’t have to because the new design is a lot more stylish and will make a nice feature in any camper. Concern for space is one thing in camping mobiles, the usage of electricity is another. In that respect, the remote control has also improved by minimizing its own power consumption. Moreover, the Comfort Control is capable of monitoring the voltage, effectively eliminating the danger of the heater deep discharging the battery. Another great feature is an alert function reminding you when to burn off soot deposits in the combustion chamber. Connecting the Comfort Control remote is as easy as plug & play.

Anyone who has opted for high-performance synthetic materials for mountain equipment will benefit from cascading solutions. One steel part after the other can be replaced in the module chain with lightweight and synthetics. With the decision to use a synthetic winch rope, the classic deflection pulley, with its wearing parts, the high weight and the tendency to get stuck, also had its day. With so-called NMP pulleys - "No Moving Parts" - nothing rolls anymore. In principle, it is only a rope guide block, through which synthetic ropes glide easily, even under high loads, due to the low frictional resistance. This does NOT work with steel cables! Our Nakatanenga Heavy Duty pulley made of hard anodized aluminum for ropes from 8-14 mm is manufactured according to military standard MIL-A-8625F TYPE III, has a breaking load of 18 t and weighs only 1.65 kg. The large radius of the "reel" is particularly important in the off-road area, since dirt and foreign objects cannot easily affect the cable routing.  The NMP roll is fastened with the supplied 10 mm thick soft shackle with a breaking strength of up to 12 t, optionally in gray or orange. You can also order the pulley individually, without shackles.

Conversion kit for independent mobile heating system A independent mobile heating system is something great. In everyday use, this is repeatedly exposed to splashing water, rain, snow, etc. To benefit from the heating system for a long time, we have decided to put together a conversion kit. With this conversion kit you make your mobile parking heater waterproof. Consisting of:2 x threaded caps2 x rubber stoppers2 x O-rings2 x side wall duct 24 mm2 x air duct 60 mm

ClimAir wind deflector for Ineos Grenadier, front Off-road vehicles are not designed for aerodynamics and turbulent air flows, of course. This is seldom noticeable when driving, because you don't usually reach the corresponding speed ranges. However, there is one aspect in which the Defender's rustic box shape very quickly reveals annoying disadvantages, and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the Landy's ventilation is weak and the windows mist up, you'll be glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the interior of the car. This annoys even hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the Defender provide an immediate remedy and guarantee an improved supply of fresh air and a pleasant interior climate in all seasons. The screens made of moulded acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when travelling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke grey and black and are supplied with a general operating permit (ABE). Fitting is a matter of minutes with the enclosed instructions. The wind deflectors are available in pairs for front or rear doors and must be ordered separately. Suitable for:INEOSGRENADIER off-road vehicle, (2022 -) off-road vehicle closed, 5 doorsGRENADIER panel van/off-road vehicle, (2022 -) panel van/off-road vehicle closed, 5 doorsGRENADIER Quartermaster, (2023 -) Pickup, 5 doorsGRENADIER Quartermaster, (2023 -) Flatbed/chassis, 5 doors Note regarding the black version: Please note: With the black version of the ClimAir wind deflectors, visibility through the Ineos Grenadier’s front side windows – which are already relatively small – may subjectively be slightly more restricted than with the transparent version. This applies in particular to the edges of the side windows. This product has been granted a General Operating Permit (ABE). Such a permit is generally only issued if, when fitted correctly, there are no safety concerns regarding its installation. The black version is therefore legally permissible for use; however, drivers should be aware that the perception of visibility may vary depending on seating position and personal perception.  

Window guides for Defender 110/130 - up to model year 2016 Available in the following versions: Window guide (piece) rear right, for all Defender 110/130   Window guide (piece) rear left, for all Defender 110/130   until year of manufacture 2016

Reef corners for Land Rover Defender 110 The ribbed corners on the rear of the Land Rover Defender protect it during off-road use and round off the appearance visually.Suitable for Defender up to MY2016.They are available for the Defender 110, in narrow or wide versions - see pictures. They are also available in various surface finishes - anodised aluminium, black and anthracite can be seen in the picture.They are always supplied in pairs and include the rivets required for fitting. Please select wheelbase, desired width and desired colour of the ribbed corners below. For Defender 110, in narrow or wide version, available in different colours, incl. mounting material, price per pair.

The perfectly fitting and extremely robust wind deflectors from ClimAir Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Jimny 2 does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Jimny windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Jimny 2, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.The wind deflectors are available in pairs for the front doors.

Nakatanenga mud flap with stainless steel holder Our heavy-duty mud flaps (for the front axle) can also be fitted together with these mud flaps.

Wind deflector from ClimAir for G-Class Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of G-Class does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic G-Class windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for G-Class offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included. Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately.

Radio remote control for AUTOTERM parking heaters With the included module and the certified radio remote control, you can control AUTOTERM Luft 2D and 4D (= Planar 2D12, Planar 44D12) parking heaters with 4 cables and AUTOTERM Flow 14S (=14TC-Mini) diesel pre-heaters by radio remote control. Think ahead and start the parking heater before you start your journey! Do you hate freezing while driving and are annoyed that it is only warm once you have arrived at your destination? Then these remote controls are perfect for you! With the included module and the radio transmitters, you can control 12-volt AUTOTERM parking heaters, parking heaters with 4 cables and AUTOTERM Flow 14D (formerly 14TC-Mini) diesel pre-heaters by radio remote control! The scope of delivery includes 2 transmitters and, of course, the module for connection to the parking heater. Scope of delivery: 2 transmitters Module for 12 volt Planar parking heaters incl. connection diagram All modems or radio remote controls are connected to the brown and white cable of the Planar. The Simcom has a prepared plug connection. The PU5 or PU27 control units can still be used. In contrast to other suppliers, our radio remote control is specially designed for Planar heaters and the receiver is housed in a waterproof and shockproof casing. Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.      

Large, robust and suitable for off-road use This high-quality mirror head, measuring approx. 245 x 145 mm, ensures optimum visibility and safety - whether on the road or off-road. Thanks to its generous mirror surface and robust construction, it is the ideal choice for anyone who regularly uses their Land Rover Defender or Series III for everyday or off-road use.  Dimensions: approx. 245 x 145 mmScope of delivery: 1 piece

High-strength recovery straps - for safe recovery and towing This is a great strap kit for winching, recovery for overlanding or for general roadside assistance. 77 mm wide, these high quality Polyamide straps achieve a breaking strength of 9 metric tons and come in lengths of 2, 8 and 15 meters. The short strap can be used as a tree trunk protector and the other lengths of 8 and 15 meters are perfect in all recovery situations, even in challenging terrain. Sewn Polyester loop-end covers protect the most sensitive parts from fraying and heat damage. Specifications:Length: 2, 8, 15 mBreaking strength: 9 tElongation: 10%Width: 77 mmMaterial: PolyamideStructure: one Layer, loops on both rope ends with sewn Polyester-covers

X-Trouser Door Trap for Land Rover Defender Keeps your clothes from getting caught in the door catch of your Land Rover Defender 90/110/130, set of 2 pieces By its rounded design, the X-Trouses door catch prevents your clothes from getting caught in the sharp-edged original Defender door catch.

VW T5/T6 heater bracket for AUTOTERM 2D parking heater This holder enables easy installation of the AUTOTERM (= Planar 2D parking heater) under the VW T5/T6. The mounting location corresponds to the factory-fitted air heater (passenger side between sill and longitudinal member). The holder is made of stainless steel and offers individually bendable mounting lugs for intake and exhaust silencers or similar. Only rivet nuts are required for installation, as there may not be any holes with threads in the carrier ex works.Optional: On the 4th and 5th photo you can see that the bracket can be combined with the stainless steel installation box (marked with blue lines) for the AUTOTERM 2D parking heater. The dimensions of the holder are adjusted in such a way that there is no collision with the car body. Attention: This still does not turn a parking heater into an underwater heater! You can order the installation box separately here.

Dropside bushing 24mm for exhaust of AUTOTERM (=Planar) parking heater, with screw holes Side wall bushing for all Planar parking heaters with an exhaust pipe diameter of 24 mm (AUTOTERM Luft 2D / 4 D = Planar 2D, 4D, 44D).There is the version with screw holes as well as the version with stud bolts where no screws are visible from the outside. The variant with stud bolts is particularly suitable for a wall thickness of up to 15 mm.If the wall thickness is thicker, the version with screw holes should be used. Please note:When installing the parking heater, you must take into account the general wading depth of the vehicle. Depending on the position of the parking heater intake, the wading depth may change individually for the vehicle. Please also be sure to observe the instructions of the parking heater manufacturer!

A-pillar grab handle The easy-to-fit, stylish A-pillar grab handle makes it easier to get in and out of Defender. The handles are made from anodised aluminium. Available in black or silver Scope of delivery: 1 piece grab rail, fixing material.

Wind deflector ClimAir Land Rover New Defender TYPE L663, front Off-road vehicles are not designed for aerodynamics and invertebrate air currents, of course. This is rarely noticeable when driving, because you usually don't even get into the corresponding speed ranges. However, there is one aspect where the Defender's rustic box shape very quickly reveals annoying disadvantages and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the ventilation in the Landy is weak and the windows mist up, you're glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the car. This annoys even the most hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the New Defender 90 provide an immediate remedy and guarantee improved fresh air supply and a pleasant interior climate in all seasons. The screens made of cast acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when traveling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke gray and black and are supplied with a general operating permit (ABE). Installation is a matter of minutes with the enclosed instructions.

Hinges for Defender bonnet Nakatanenga bonnet hinges for Land Rover Defender (all models, all model years) address two problems associated with the original hinges: for one they are more durable and have no play, additionally they greatly complicate bonnet theft. We have put emphasis on ease of fitting - this can be done by yourself. There are no holes that need drilling as only existing ones are used, all fixings, icluding the special safety-socket are supplied. The hinges are available in stainless steel or with black powder coating, please choose the desired finish.

Nakatanenga CargoBear Awning Bracket The Nakatanenga CargoBear Awning Bracket allows a wide range of standard awnings to be securely attached to the CargoBear roof rack. The bracket is not limited to specific awning types, but is suitable for a variety of different manufacturers and models.   Suitable for CargoBear roof racks on the following vehicles   Land Rover Defender up to model year 2016 Mercedes G-Class Ineos Grenadier   Not suitable for the CargoBear roof rack on the Suzuki Jimny or the Land Rover New Defender from 2020 onwards!   The awning bracket can be used on CargoBear roof racks with 30° feet and is compatible with both CargoBear 1.0 and CargoBear 2.0.   Compatible awnings The brackets are suitable for a wide range of standard awning models, including, for example:   RoofLodge Awnings Rhino-Rack Foxwing Rhino-Rack Sunseeker The models listed are merely a selection. Depending on the mounting system, numerous other awnings can also be fitted.   Installation and contents of the pack At least two CargoBear crossbars are required for installation. The four-piece set is supplied with the fixing materials required to attach the awning brackets to the CargoBear roof bars. Please note: The fixing materials required to attach the awning to the brackets are not included in the scope of delivery.   Material Stainless steel, black powder-coated   Compatibility Suitable for CargoBear 1.0 and CargoBear 2.0 roof racks on the vehicle models listed above.  

Wind Deflector ClimAir Land Rover Defender TYP L663, front or back Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic.  There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender 90,110 und 130, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.  Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately. suitable for New Defender 90,110 and 130 from 2020 onwards

ClimAir wind deflector for Discovery 3 & 4 - Fresh air without compromise Off-road vehicles are not designed for aerodynamics and invertebrate air currents, of course. This is seldom noticeable when driving the car, because most of the time you don't even get into the corresponding speed ranges. However, there is one aspect where the rustic boxy shape of the Discovery quickly shows annoying disadvantages and that is the almost rectangular and rather vertically positioned windows. Especially in tough off-road conditions or in cold and wet weather, for example, when the Discovery's ventilation fails again and the windows mist up, you're glad to be able to roll the windows down a bit. But then the effect described at the beginning becomes apparent very quickly. The strong turbulence on the angular windows is not only noisy, but draws even more dust and water into the car. This is annoying even for hardened off-roaders. The absolutely precise-fitting and extremely robust wind deflectors from ClimAir for Discovery III and Discovery IV provide an immediate remedy here and guarantee improved fresh air supply and a pleasant interior climate in all seasons. The screens made of cast acrylic glass reliably keep snow and rainwater out both when driving and when stationary, and ensure that you can avoid any build-up of heat through the window, which is open a crack wide, even when it is very hot in summer. This is especially good news for children and pets on the road or on a journey. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in smoke grey, black and clear and come with general operating permit (ABE). Installation is a matter of minutes with the enclosed instructions. The wind deflectors are available in pairs for the front doors. Suitable for Landrover Discovery III (L319) 2004 - 2009 off-road vehicle closed, 5-doors and Discovery IV (L319)) 2009 Off-road closed, 5-door

AUTOTERM fuel pump / fuel pump, extra quiet Due to the hydraulic end stop, the pump is about half as loud as a conventional fuel pump. Suitable for AUTOTERM 2D (= Planar 2D) and AUTOTERM Flow (= Binar).On-board voltage: 12 VFlow rate: 4.4 ml https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment

Transmission tunnel tray R380 LHD This transmission tunnel tray only fits Defender equipped with an R380 transmission, such as 300TDI or Td5.Moulded can holders, fitted with a neoprene insert, provide secure support for a wide range of standard drinks cans and bottles. No more pens and loose change disappearing into the depths of the dashboard. All these little things now find a safe place in this tray made of ABS plastic, which, thanks to its precisely fitting shape and the rubber lip all around, finds a stable hold on the gearstick lever base without any complicated assembly. This cardan tunnel tray ensures that you always have loose change, pens, mobile phone or torch to hand.

Complete Installation Kit for the Nakatanenga Drawer System The right attachment kit for our Nakatanenga drawer system for the Defender. Delivery: 4 holders4 screws M8x20 Linsenkopf hexagon socket8 nuts M8 self-locking12 body washers No additional holes need to be drilled, as the existing 4 holes of the lashing eyes can be used (the lashing eyes must be unscrewed for this).We will be happy to advise you: ☎ +49 9181 466 644

TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.

Replacement lever for trailer coupling KNB500070 Replacement lever for trailer hitch KNB500070 for Land Rover Discovery 3/4 and Range Rover Sport.Delivery incl. lock