Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Bulkhead conversion kit Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle. Note: We are already developing a perfectly matching net as a partition wall.

Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4. The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28. Scope of delivery: 23, 5 or 1 pcs

Power screwdriver bit 1/2 inch with plastic sheath, to protect the rim Features: Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m) Material: Chrome molybdenum steel (Cr-Mo), forged and hardened Suitable for impact wrench and torque wrench !

The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm  

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Bumper protection  What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, matt black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer.