Vehicle accessories

Checker plate cover plate for Defender 90/110 Cover plate for the rear door of the Land Rover Defender 90/110 (outside), material: anodised aluminium (3mm), different colours available, is mounted instead of the original spare wheel holder. The use of anodised aluminium has the advantage that the plate does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below. In model year 2002 there was a change to the rear door, unfortunately it is not possible to differentiate purely by model year here. Until 2002 the door was made of aluminium and the window was glued in. From 2002 onwards, the rear door was made of steel and the window is fixed by means of a rubber seal. The dimensions of the cover plate is 45x28 cm (from 2002). Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Safe and strong recovery: The HD towing eyes in a pair for your off-roader! Do you recognize this? A tricky passage, a moment of carelessness, and you're stuck. In such moments, reliable recovery equipment is worth its weight in gold - and this includes absolutely solid towing eyes! Standard eyelets are often not designed for the high loads of a real recovery or are positioned unfavourably. This is exactly where our heavy-duty (HD) recovery rings (JATE-RINGS; JATE = Joint Air Transport Executive) come into play, which we offer in a practical pair. This means you are ideally equipped for the worst-case scenario, regardless of whether you need to rescue yourself from a difficult situation or want to help a colleague. For Land Rover Defender without underride guard! Why you should rely on these HD towing eyes: Maximum load capacity: These eyelets are designed for tough applications and can withstand strong pulling forces when it counts. Say goodbye to worrying about your recovery points giving way! A plus in safety: Rely on material and construction that have been specially developed for the demands of off-road use. Secure recovery points are the be-all and end-all for a successful and, above all, safe recovery. Always in a double pack: We supply these robust eyelets as a pair. This enables a more even distribution of force during recovery (e.g. with a recovery traverse) and gives you more flexibility. Robust look: They don't just look strong, they are strong! These towing eyes emphasize the robust character of your off-road vehicle. Universally applicable: Ideal for use with a recovery strap, shackle or cable winch. Easy to fit: These eyelets are designed so that they can be easily fitted to the designated points on your vehicle frame (please check the specific compatibility with your vehicle model). Be prepared when it counts! With these HD towing eyes, you are investing in your safety and the operational readiness of your vehicle. They are an essential part of any serious off-road equipment and give you the good feeling of being prepared for even the most demanding situations. Equip your off-roader with these indispensable aids now and be well-prepared for your next adventure! What you get: 2 heavy-duty HD towing eyes Fastening set Do you have any questions about mounting, choosing the right recovery strap or do you need additional accessories? Just contact us - we at Nakatanenga will be happy to help you!

For reliable ignition of your parking heater Glow plug as a spare part for AUTOTERM Planar 2D12 parking heater.

Spray Flap Holder for Land Rover Defender 90 and 110 Stainless steel holder for Land Rover Defender 90 and 110 (all years of manufacture), for optional front or rear axle, Supplied in pairs, including mounting hardware. IMPORTANT NOTE: If you still want to build corner protectors on the Land Rover Defender 90 or if you have already attached them, you need the flap holders WITH recess (select "vehicle type"). The original spray flap brackets are made of painted steel. Anyone who has been driving a Defender for a long time knows that every few years the brackets rust through, as the paintwork flakes off over time and dirt, oily deposits and constant moisture provide the perfect conditions for corrosion. Our own custom-fit splash guard brackets are not only made of stainless steel, but are also powder-coated black. This makes them extremely robust, corrosion-resistant and durable. This finally puts an end to the constant replacement of the holders. Of course, existing splash flaps can still be used.Suitable for Land Rover Defender up to MY2016. If you want to be on the safe side, we also have matching edge reinforcements for the splash guard holders. Supplied in pairs.

Practical tool bag What’s the best way to transport your tools and equipment? Case, box or bag? A bag will offer great advantages on the road, especially if it is as tough and high quality as our new Nakatanenga Bag. It is flexible, needs hardly more space than the actual contents and adds little extra weight on top. That makes our bag ideal to quickly pack, transport or store your gear, even in small spaces. Heavy items aren’t a problem either due to the strengthened bottom of the bag, the wrap-around straps and the quality YKK zipper. And since bags are naturally less organized than cases or boxes, we have added four extra pockets on the inside, creating perfect spaces to store smaller objects separately. Our Nakatanenga tool Bag is the ideal partner for jobs on the road: Small, light, robust and flexible in its use. Material: 100% Nylon PU coatingZipper: YKK DELIVERY WITHOUT CONTENTS! And by the way: At Nakatanenga, we are exclusively using materials with 100 % Nylon PU coating for all our textile products. In contrast to PVC, Nylon PU (Polyurethane) contains no harmful, phthalate-based softeners. Until recently, lower-molecular-weight phthalates have been the primary choice for plasticizers in synthetic materials, even in food products and cosmetics. Phthalates accumulate in the environment, however, and are suspected to act like hormones due to their molecular similarity. Toxicologically, this is highly alarming, because it is assumed that these chemicals can cause many diseases, including cancer. For the coating of our Nakatanenga textile products, it is therefore no question for us to exclusively use non-toxic, ecologically sound alternatives that pose no health risks, like Nylon PU.

Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to  95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders  (TDi, TD5, TD4).

Top clamp for retrofitting: Suitable for the Jackall jack - ideal for replacing worn or damaged parts. Dimensions: 35 × 65 × 160 mm

Mounting plate 166.4mm x 114.3mm Universal mounting plate for winches, with standard hole pattern 6.55" x 4.5" (166.4 mm x 114.3 mm) and pulling force up to 5,000 lbs (fig. similar).

Nakatanenga RSpare wheel retaining plate stainless steel The stainless steel mounting plate is designed for DIY projects. It enables a Land Rover Defender wheel to be mounted on a flat surface, e.g. on a roof rack, a loading area or in the interior. The screw-in bolts/threaded rods have standard threads M16x2. The tire is fastened using the washers and nuts supplied. The screw-in bolts are 190 mm long. The size of the base plate is 200 mm x 200 mm. The plate alone, without accessories, is NOT suitable for mounting the spare wheel on the hood of the Defender! Please use the spare wheel holder for the TD5 linked below. media/pdf/74/df/0c/Merkblatt-Edelstahl-und-Rost.pdf 

Autoterm Push Control S and L The Autoterm Push Control is a compact and easy-to-use switch for controlling Autoterm parking heaters. It enables different operating modes and functions depending on the heater. It also fulfils a long-held customer wish to be able to connect two control units to one heater - so the heater can be started conveniently from the driver's cab, for example, while the standard control unit is installed in the living area. NEW: The Autoterm Push Control enables simple control of air and water level heaters and, for the first time, the option of connecting two control panels to one heater! FunctionsOperating modes for air heatersPower mode (standard mode): With a single or multiple click, you can choose between five fixed power levels. The colour of the LED ring indicates which power level the heater is currently inTemperature mode: In conjunction with an external temperature sensor, a temperature of 18, 21 or 25 degrees can be achieved and maintained. "Maximum power" can also be set as the highest level in temperature mode. Operating modes for water level heatersPreheating mode: The heater runs until a certain coolant temperature is reached, then switches off the burner and restarts when the temperature drops. Here you can choose between a heating time limited to two hours or continuous operation. Simple installationThe Push Control comes in a plug-and-play design with an included control module and connection cable for quick and easy integration. Dual controlfinally possible: The Push Control can be used as the sole control element for your heating system or combined with the Autoterm Comfort Control control panel to enable dual control for a single heating system. This makes it easy to operate your parking heater in different areas of the vehicle and ensures maximum user comfort. Robust and waterproofStainless steel housing with IP67 protection class, making the switch waterproof and safe and durable even under extreme conditions. CompatibilitySuitable for Autoterm Air heaters (2D, 4D, 8D, 9D) and Autoterm Flow heaters (5D, 5B, 14D). Available in two versions:Variant S: 6 mm thread with Molex plugVariant L: 12 mm thread with round plugDimensions for both switches:Diameter of the button surface 25 mm each.Thread diameter 22 mm each.  

Corner protector for Defender seat box The edge of the Defender seat box is susceptible to damage and sometimes looks quite pitted and unsightly after a while. With these elegant corner protectors, you can spruce up the seat box and protect it at the same time!Made of 3 mm black powder-coated steel and CNC-manufactured to the highest precision. With the help of a cordless screwdriver and the included fastener, the corner protectors are attached in less than 5 minutes! The kit contains a pair of corner protectors and 12 pcs. 8x19 mm steel screws. The corner protectors also fit a Series II and III, but require a matching hole to allow the seat rail to be attached.Scope of delivery: One pair of corner protectors incl. fixing material. Illustrations may differ.

Installation flange air heater for floors up to 83mm NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!This flange allows the installation of an air heater in floors or walls with a wall thickness of up to 83 mm.While an air heater is normally only suitable for installation in thin sheet metal walls or floors, this flange can also be used with an insulated floor construction with a wooden panel or directly a sandwich panel up to 83 mm thick. There is no need to scribe and drill the many different holes for combustion air, flue gas, fuel line and fixings - these are already integrated in the flange and allow the heater to be mounted directly in any direction. Only a rectangular cut-out of approx. 88x130 mm is required.Procedure:    Find a suitable flat installation location with max. 85 mm total thickness (e.g. floor panel+insulation+wood panel).    Cut a rectangular cut-out 88x130 mm.    Insert the installation flange with sealing compound and screw it in place.    Insert heater from the inside into the flange and mount all hoses etc. from the outside.Stainless steel, laser-cut, welded, partially glass-bead blasted.Suitable for Autoterm air heaters 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and possibly Webasto.

Anti-rotation lock 231 / 232 from Rockinger - suitable for swivelling trailer eyes This anti-rotation lock is specially designed for Rockinger couplings 231 and 232. It enables the safe operation of swivelling trailer eyes and prevents unintentional twisting of the coupling - for more stability and safety in trailer operation.

Extension of the seat rails by 50 mm Made of stainless steel and black powder coated, for one seat. Fits all Defenders models from MY 1985 with the exception of military vehicles and those with aftermarked sports seats. The seat rail extensions can be fitted to the original Land Rover seats, the special edition Recaro racing seats, as well es numerous other racing seats. Attached to the original seat mountings in the seat box and respective holes in the seat frames. High-tensile fixings are supplied. The extensions offer more legroom, moving the seats 50 mm backwards and raising them by 30 mm.

Rear storage compartment for Cubbybox in Land Rover Defender 90/110/130 Storage compartment for mounting on the rear of the cubbybox in the Land Rover Defender 90/110/130, dimensions: 265x232x133 mm (WxHxD), colour: blackThe storage compartment is screwed to the rear of the original or aftermarket cubbybox of the Land Rover Defender and offers space for maps, CDs, bottles and numerous other things that want to be stored in the cockpit of the vehicle.The product is compatible with our valuables compartment and parking heater console. Foot space for rear seat passengers is restricted in the Cubby Box area. Delivery without Cubby box.

Switch for indicators, high beam and horn for Land Rover Defender suitable for Land Rover Defende from VIN ...WA138480 (Defender TD5 from MY1998) to FIN ...EA999999 (Defender TD4 up to MY2014)

These recovery shackles (2-piece) fit the front bumper of every Land Rover Defender 90/110/130, with and without A/C. They are available in black galvanized or passivated. Assembly Information: For vehicles with A/C it is important to disassemble the grill, then mount the shackles and then reassemble. All the necessary hardware is enclosed in the package. Material Information: Passivating is the process of making metal, or another substance, unreactive by altering the surface layer or coating the surface with a thin inert layer. Max Load: 15 t Dimesions: Length: 100 mmWidth: 80 mmHight: 48 mmHole diameter: 22 mm Please chose the desired surface.

Compressed air hose for VIAIR compessors Features: 0 - 200 PSI / 0 - 13,8 bar Close-Ended 1/4″ Quick Connect Coupler & Stud Deluxe Carry Bag Please note:The article does NOT fit the 440P compressor (since it has a 3/8 "connection).

Stainless steel radiator cover for Land Rover Defender. Stainless steel radiator cover for vehicles with air conditioning, for Land Rover Defender 90/110/130, as a replacement for the corrosion-prone original part, in various designs and colours.The cover is optionally available with round and square openings, in stainless steel silver powder-coated or stainless steel black powder-coated.Please select the desired variant below.Another name for the radiator cover would be radiator guard or replacement cover for the radiator grille. Material Stainless steel silver powder-coated is colour-matched to our radiator grilles and headlight surrounds.

Silencer for 60mm hot air hose This warm air silencer reduces the noise of incoming or heated air from the heating system. There are connections for the hot air pipes on both sides. Technical data: Connection dimension 60 mm Length of the silencer 300 mm Overall length 440 mm Silencer diameter 130 mm NOT for combustion air!

Installation flange air heater for floors up to 48mm NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!This flange allows the installation of an air heater in floors or walls with up to 48 mm wall thickness. Suitable for the Webasto and Eberspächer D2 parking heater.While an air heater is normally only suitable for installation in thin sheet metal walls or floors, with this flange an insulated floor construction with a wooden panel or directly a sandwich panel up to 48 mm thick can also be used. There is no need to scribe and drill the many different holes for combustion air, flue gas, fuel line and fixings - these are already integrated in the flange and allow the heater to be mounted directly in any direction. Only a rectangular cut-out of approx. 88x130 mm is required.Procedure:    Find a suitable flat installation location with max. 48 mm total thickness (e.g. floor panel+insulation+wood panel).    Cut a rectangular cut-out 88x130 mm.    Insert the installation flange with sealing compound and screw it in place.    Insert the heater from the inside into the flange and mount all hoses etc. from the outside.Stainless steel, laser-cut, welded, partially glass-bead blasted.Suitable for AUTOTERM air heaters (=Planar) 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and possibly Webasto.

Narrow Air Vent – 27 x 6 cm – for 60 mm Connection This narrow air vent is the ideal solution for clean and space-saving warm air distribution in a camper, van, panel van, or expedition vehicle. Its flat, elongated design is especially advantageous wherever traditional round vents would take up too much space. With its dimensions of 27 x 6 cm, the vent is perfect for discreet installation in furniture, paneling, or base areas. The 60 mm warm air duct connection makes it compatible with many common parking heater systems. The durable material is designed for use in heating applications and offers excellent dimensional stability as well as heat resistance. Ideal for anyone looking for a functional and visually subtle solution for warm air routing. Product features:• narrow design for space-saving installation• suitable for 60 mm connection• dimensions: 27 x 6 cm• durable and heat-resistant• ideal for campers, vans, off-road vehicles, and expedition vehicles The components are professionally 3D-printed and impress with their high-quality, practical design. Made from nylon 12 reinforced with carbon fibre, they offer excellent dimensional stability and are both heat- and UV-resistant, making them ideal for reliable use in demanding environments. The result is a durable and functional solution for hot-air systems in vehicles, campervans or custom-built installations. Dimensionally stable even at operating temperatures up to 150 degrees Celsius.

Essential differential guard for the rear axle of any Land Rover Defender 90/110/130 Not many parts on a 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.

Protective strip kit from TREKFINDER with 5 m long, attractive rubber profile incl. end caps, suitable for cars, lorries, motorhomes, boats and trailers Multifunctional use: PROTECTION: The protective moulding set effectively protects contact surfaces on the vehicle from external mechanical impact. Successfully prevents scratches, dents and minor damage caused by impacts such as parking bumps, shopping trolleys, doors, etc. RETURNS: Existing scratches, paint damage and visual defects can be covered with the mouldings at a later date. OPTICS: The protective moulding set enhances the appearance of your vehicle. The elegant rubber profile, as a discreet application, sets striking accents and makes your vehicle appear more valuable.Material: high quality durable flexible Temperature-resistant UV-resistant high adhesive strength Shape: the curved shape prevents the adhesive tape from being visible, the moulding does not stick out but merges with the bodywork, an invaluable advantage over conventional profiles!!! Easy to fit: The protective moulding is flexible and can be easily cut to the desired length.Remove the backing film from the adhesive strip and press the protective moulding onto the planned body part.Then select the desired shape of the end cap (round or square). Remove the backing film here too and press it onto the end of the protective moulding.DONE :) Scope of delivery: 1 piece 5 m rubber profile 8 end caps 1 cleaning cloth

Roof rack support set for universal use Quick attachment and removal thanks to Velcro fastening system Made from high-quality, water-repellent materials Ideal for outdoor use Suitable for all commercially available roof rack platforms or crossbars - regardless of brand Can also be fixed at the front and rear with an eyebolt High-quality roof rack pads for unique adventures Made from high-quality materials, our roof rack pads guarantee durability and comfort when travelling.   Complete set for comprehensive protection The set includes hard-wearing roof rack pads including eyebolts for fastening, which offer comprehensive protection during transport. The support pads protect your equipment from scratches and dents and ensure safety on every journey.   Versatile and comfortable Ideal for transporting your SUP, kayak, skis, canoe or snowboard. Also very suitable for craftsmen, for transporting ladders, wood or other long goods.   Technical data: Material: Canvas cover and EPE foam padding Product dimensions: 600 x 85 x 95 mm (L x W x H) Weight: 0.5 kg Scope of delivery: 2 x roof rack supports 4 x eyebolts + fastening components 1 x transport bag Instruction manual

Comfortable seat cushion suitable for 48L transformer box – Comfort Meets Function Turn your sturdy Transformer Box 48L into a comfortable seat or resting place – quickly and easily with our high-quality seat cushion. Also ideal for other surfaces. Why it fits so perfectly: The Transformer Box impresses with its smart design: it is made of durable HDPE, extremely resilient (static load capacity up to 800 kg for 48 L), and even when folded, it takes up minimal storage space. In addition, the contents can be accessed at any time via the practical front flap, even when stacked. The seat cushion turns any surface into a comfortable seat: with its 4 cm thick foam core, it ensures pleasant seating comfort, while the nylon PU-coated cover is robust, removable and washable – perfect for outdoor use. It can be easily secured using sewn-in loops that can be attached under the box lid. Colour options for the seat cushion: Grey Black Stone grey-olive Note: In order for the Transformer boxes to be used as seating, they require a matching wooden lid on which to place the seat cushion. A custom-fit plastic lid is also available to protect the wooden lid.

Overhaul kit for injection pump  This overhaul kit is suitable for repairing leaks in the diesel pump on 200Tdi and 300Tdi engines. It contains all the seals required to overhaul the pump.   Suitable for all vehicles with 200Tdi and 300Tdi engines (approx. MY1989-1998) • Discovery 200Tdi • Defender 200Tdi • Discovery 300Tdi (only suitable for pumps with solenoid valve / not for models with EDC control) • Defender 300Tdi (only suitable for pumps with solenoid valve / not for models with EDC control) • Range Rover Classic 200Tdi & 300Tdi (only suitable for pumps with solenoid valve / not for models with EDC control)

Essential differential guard for the rear axle of any Land Rover Defender 90, Discovery 1 and Range Rover Not many parts on a 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.Fitts all model years

Wind Deflector ClimAir Land Rover Defender TYP L663, front or back Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic.  There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Defender’s windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Defender 90,110 und 130, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in transparent, smoke grey or black and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.  Deflectors are sold in pairs for front and rear doors respectively and have to be ordered separately. suitable for New Defender 90,110 and 130 from 2020 onwards

DABUCKET is da solution For what? How about: wet shoes, garbage, rubbish, dirt, charcoal, floor boards, sandbox toys, diaper pails, beach blankets, sports gear, camping dishes? DABUCKET - For everything that needs to be quickly and easily removed, stowed and transported on the way or at home, while remaining clean and tight. The idea behind our flexible DABUCKET all-purpose bucket is very simple. You can simply put dirt in your own packsack, the plastic bag or in the trash bag as a liner in the open DABUCKET, pull the closure tunnel up and pack it away safely. That is why we have designed the two variants DABUCKET to the size of standard garbage bags: with a height of 30 cm and bottom diameter 28 cm for a 25-liter bag and 45 cm to 36 cm for the 50 liters. The DABUCKET can be easily put on with the adjustable shoulder strap, conveniently loaded and unloaded with two handles, even when it is heavy, hanging on a hook or carabiner and can be quickly attached to keder rails, eg. from the roof tent, be edged. A large fleece area is used to fasten in the car or RV, a small flap for customization or labeling the DABUCKET with patches. 100% nylon PU coated means sturdiness, easy cleaning and no exposure to harmful plasticizers. washable at 30 ° C Dimensions 25 L: height 30 cm (without lock tunnel), bottom diameter: 28 cmDimensions 50 L: height 45 cm (without lock tunnel), bottom diameter: 36 cm Available in the following colors:Gray coyoteOrange-coyoteblack This item was designed, produced and tested in our in-house tailoring. A dedicated team and short distances enable continuous quality control and further development of our textile products. And if you already have a tailor's workshop in the house, then it is easy to accept customer requests for changes, special designs, suggestions and suggestions for improvement at short notice and to implement them as far as possible. Mail or call is enough!

Fastening set for AluBoxes on Nakatanenga CargoBear 1.0 and 2.0 Probably the easiest and safest way to mount an AluBox on CargoBear 1 or 2: Our customised fastening solution consists of 4 brackets that screw the box base firmly to the roof rack from the inside. This not only serves to secure the box for transport, but also prevents it from being quickly stolen on the road when it is locked. Mounting the brackets is child's play. Apart from the tools, everything you need is included. You can download detailed instructions from our web shop, where you will of course also find a large selection of matching aluminium boxes.  

Stainless steel lock for Nakatanenga side storage boxes  Our first generation lockable storage boxes for the sides of classic Defenders were secured by round plastic locks. We now offer these security locks in a rustproof and durable stainless steel version, suitable both for replacement and upgrade. By the way, swapping the locks poses no problem whatsoever, as the new stainless steel versions have the same fit as the older Southco versions. New fastening material is also included. The lock comes with 2 keys. PLEASE NOTE: The lock only fits the older version of the storage box with a round lock.