Efficient and robust folding pulley for safe and easy recovery You should have at least one quality snatch block pulley in your winching kit at all times. Most often, you will use it when there are no straight lines in which you can tow your vehicle, but in any case, the snatch block doubles the towing force. That means winching your trapped vehicle free becomes easier and the winch itself is put under less strain while doing so. Our new foldable Nakatanenga snatch block utilizes the familiar pulley principle, but in our development process we focused on the best choice of materials, on high-end production and on improving usually overlooked details. Snatch blocks have to be solid, light-weight, universally applicable, smooth-running and easy to clean. Our construction from exceptionally sturdy 6 mm galvanized steel and a 15 mm polymer reel suits any kind of winch line with a diameter of 8 – 13 mm: plastic, plasma or steel. The snatch block doesn’t need any maintenance or servicing other than cleaning it after use. Even when using it with steel cable, it doesn’t need to be lubricated. The choice of polymer synthetics for the reel makes it smooth-running with any choice of cable or rope. The workload of the block is 9000 lbs or over 4 t, the breaking load is 19.300 lbs or over 8.7 t. The compact, foldable design of the snatch block guarantees solidity, easy stowability and a low weight of only 2,30 kg – ensuring that it fits into any travel 4x4 or expedition vehicle that’s already stuffed to the roof. As accessories we recommend our Nakatanenga winch straps/tree trunk protectors and soft shackles. And finally, about the details: in contrast to many other snatch blocks, we have actually improved the metal side plates and the eyes. Both have folded, rounded edges that make them not only easier and safer to handle and less prone to shifting abruptly as the rope is tightening but first and foremost it prevents synthetic ropes from chafing or having fibers or strands damaged. Moreover, we applied high quality galvanization to the plates to prevent corrosion and to maintain an easy-to-clean surface even after repeated use in water, mud and snow. Have fun winching! Technical Data:Work load: 9000 lbs / 4.082 tBreaking load: 19,300 lbs / 8.754 tPlate material: 6mm galvanized steelReel: 125 mm polymer reelWinch line diameter: 8-13 mmLine types: steel cable, synthetic rope, plasma ropeWeight: 2,30 kgLubrication: maintenance free

Cable winch set for Lada Niva / TaigaIncluding complete installation set The extremely robust bumper fits the original stops on the Lada. Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below.In the case of other vehicle types, the TÜV must be contacted in advance as to whether the part is entered as the equipment carrier. Technical data cable winch:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 210: 13-stage planetary gear Generally: Hornrope 7 to plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmNet weight: 32.8 kgGross weight: 35 kg Furnishing:Aluminum rope windowExtremely durable powder coatingStainless steel one-way clutch (decouple the gearbox to quickly unwind the rope by hand)Control box removable for mounting not directly on the winch Included accessories:Remote control with cableRope windowhookFixing screws 4xM10 We grant a 3-year guarantee on the gearbox and drum in compliance with the guarantee and service regulations. TÜV certificate is for the following vehicles:     Vehicle type            ABE / EG-BE no.     Variant / version212140                    e2 * 93/81 * 0183 * ..        all212140                    e2 * 98/14 * 0051 * ..        all21214                      e1 * KS * 0004 * ..           all2121A                     e1 * KS * 0008 * ..            all2121                        e2 * 98/14 * 0183 * ..        all2121                        e2 * 2001/116 * 0260 * ..   all2121 **** DA            e2 * 2001/116 * 0326 * ..   all2121DE                   e1 * KS07 / 46 * 0021 * ..  allM2121                    e2 * KS07 / 46 * 0011 * ..   allN2121                     e2 * KS07 / 46 * 0012 * ..  allM2131                    e2 * KS07 / 46 * 0077 * ..  all

Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable  cable harness  complete cable winch control radio remote control (supplied without battery)  cable remote control mounting plate complete with installation material  installation material  installation & operating instructions  TÜV parts certificate.

Recovery rope, kinetic, incl. carrying bag Benefit bundle for off-road fans: High-quality kinetic recovery rope (either 19 mm or 24 mm diameter) in 8 m length - including robust mesh carrying bag. Ideal for safe and effective off-road vehicle recovery. Practical and space-saving storage.

The Horntools Alpha 12.0 Super Speed ​​Edition With its low weight and compact dimensions, it is perfectly suitable for vehicles with a total weight of up to 4 tons. Furnishing: 9.2 mm Ø galvanized steel cable with 28 m length with hook INFO: Steel rope is included separately in the scope of delivery stainless steel roller rope window remote control 1x cable 1x radio integrated (delivered without battery) potted reinforced relay (contactor) waterproof motor IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) freewheel lever * gear neutral position made of stainless steel cross braces made of stainless steel reinforced rope drum ** (suitable for use with plastic rope) powder-coated aluminum die-cast housing, motor / gearbox reinforced contactor housing made of deep-drawn sheet metal, powder-coated internal drum brake with 3 brake shoes cable length: 1.7 m cable cross section: 50 mm² 3 year guarantee operation manual * A freewheel lever is used to decouple the gearbox to quickly unwind the winch by hand. Technical specifications: working range voltage: 10-16 Volt max. Power consumption 600 A ** train speed free of load 11 m / minute traction 5,400 kg ** 3-stage planetary gear 110: 1 geared down net weight: 25.8 kg without rope and rope window Series wound motor * drum (ØxLength): 63x226 mm overall size (LxWxH): 577 x 160 x 225 mm * Series motor with an electrically generated magnetic field** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. 

The Horntools Alpha 9.5   With its low weight and compact dimensions, it is perfect for vehicles with a total weight of up to 3.5 tons. Especially for touring vehicles that are fully equipped, the winch should not have too much weight, but still have to do great things. Furnishing: 9.2 mm Ø galvanized steel cable with 26 m length with hook INFO: steel cable is included separately in the scope of delivery stainless steel roller rope window remote control 1x cable potted reinforced relay (contactor) waterproof motor IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) freewheel lever * gear neutral position made of stainless steel cross braces made of stainless steel reinforced rope drum ** (suitable for use with plastic rope) powder-coated aluminum die-cast housing, motor / gearbox reinforced contactor housing made of deep-drawn sheet metal, powder-coated internal drum brake with 3 brake shoes cable length: 1.4 m cable cross section: 35 mm² 3-year warranty - this warranty exists independently of the existing gratuitous statutory rights for defects. The statutory rights in respect of defects are not restricted by this guarantee. Operating instructions * A freewheel lever is used to decouple the gearbox to quickly unwind the winch by hand. Technical specifications: working range voltage: 10-16 Volt max. Power consumption 365 Amp ** train speed free of load 7m / minute traction 4,300 kg ** 3-stage planetary gear 230: 1 geared down gross weight: 40 kg net weight: 32.3 kg weight with steel cable and roller cable window: 37.5kg Series wound motor * drum (ØxLength): 63 x 226 mm overall size (LxWxH): 577 x 160 x 225mm * Series motor with an electrically generated magnetic field** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage.

Kinetic mountain rope KERR If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: green (the rope is available in color orange here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.

Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below! Technical specifications: Engine:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 166 : 13-stage planetary gear General data:Max pulling force: 3600 kgMaximum train speed: 5,5 m / min (measured without load)Plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:cable remote controlfairleadmounting screwsoperation manualhookBumpers spacers TÜV certificate for the following vehicles: Vehicle type         ABE / EG-BE no.         Variant / version212140                  e2 * 93/81 * 0183 * ..                 all212140                  e2 * 98/14 * 0051 * ..                 all21214                    e1 * KS * 0004 * ..                     all2121A                   e1 * KS * 0008 * ..                      all2121                     e2 * 98/14 * 0183 * ..                 all2121                    e2 * 2001/116 * 0260 * ..            all2121 **** DA        e2 * 2001/116 * 0326 * ..            all2121DE               e1 * KS07 / 46 * 0021 * ..           allM2121                 e2 * KS07 / 46 * 0011 * ..           allN2121                 e2 * KS07 / 46 * 0012 * ..           allMU2121                 e2*KS07/46*0056*                 allMU2121                e2*KS07/46*0076*                  all      M2131                e2 * KS07 / 46 * 0077 * ..           all

Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see table below! ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! Technical specifications: Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts Transmission:3-stage planetary gearReduction: 166: 1 General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook TÜV for the following vehicle types: Vehicle type      ABE / EG-BE no.       Variant / version212140               e2 * 93/81 * 0183 * ..             all212140               e2 * 98/14 * 0051 * ..             all21214                 e1 * KS * 0004 * ..                 all2121A                 e1 * KS * 0008 * ..                 all2121                   e2 * 98/14 * 0183 * ..             all2121                   e2 * 2001/116 * 0260 * ..       all2121 **** DA       e2 * 2001/116 * 0326 * ..       all2121DE              e1 * KS07 / 46 * 0021 * ..      allM2121               e2 * KS07 / 46 * 0011 * ..       allN2121               e2 * KS07 / 46 * 0012 * ..       allMU2121                 e2*KS07/46*0056*            allMU2131                  e2*KS07/46*0076*           allM2131               e2 * KS07 / 46 * 0077 * ..      all

Mesh carrying bag for mountain ropes Our robust and easy-to-clean Polyester mesh bag was initially developed by our Nakatanenga textile shop to hold the kinetic tow ropes. The big Kinto rope with 8 m length and 24 mm width fits perfectly into this 60 x 35 cm bag. Apart from the ropes, this mesh bag is absolutely perfect for everything else that comes dirty and dripping: sports shoes and hiking boots, rain gear, training equipment, water sports, you name it.   Using mesh as the primary material for bag, also means much nicer handling in comparison to ordinary closed materials. You can quickly pack wet and dirty ropes and let them drain and dry in the bag. That way, there is no chance for trapped moisture to contribute to any material deterioration and unpleasant moldy smells.   You can also use the mesh itself to grab and handle excessively dirty equipment without having to use your bare hands, if nothing else is available. That comes in especially handy in emergency recoveries on the road, because you’re never as likely to carry all the dirt into your car’s interior. After the job is done, you can easily hose down the rope within the bag.   Robust seams, a quality zipper, wrap-around handles and two orange loops for hanging or securing make this mesh bag one tough and durable receptacle for all your rough gear.   Material: Polyester - washable up to 30°   Dimensions: Width 60 cm Height 35 cm   MADE IN EU

Black Mamba: Your Kinetic Savior – Dynamic KERR Recovery Rope with 12.5 Tons from Nakatanenga Imagine you're in the middle of an adventure, far off paved roads, and your vehicle is relentlessly stuck. In moments like these, you need a reliable partner to free you safely and gently from tricky situations. This is exactly where the Black Mamba Dynamic KERR Recovery Rope from Nakatanenga comes into play – your ultimate insurance for demanding off-road situations. What is a KERR Recovery Rope and why do you need it? KERR stands for Kinetic Energy Recovery Rope – a rope that stretches under load and uses the stored kinetic energy to free your stuck vehicle gently but powerfully. Forget the harsh jerking of static ropes that strains material and nerves! The Black Mamba works like an extremely strong rubber band: it absorbs the energy of the pulling vehicle and releases it in a controlled manner to the stuck vehicle. The result? Significantly less stress on both vehicles and a higher chance of success, even getting out of the deepest mud, sand, or snow. The Power of the Black Mamba – 12.5 Tons That Convince With an impressive breaking strength of 12.5 tons, the Black Mamba is perfectly equipped even for heavy off-road vehicles, vans, or agricultural machinery. This enormous pulling power gives you the security of not being let down, even in extreme situations. Rely on a recovery rope that delivers what it promises. Dynamics that Protect and Perform: Gentle Recovery: The dynamic elongation of up to 30% ensures gentle energy build-up and an equally gentle, yet enormously effective release of this energy. This protects recovery points, frames, and drivetrains of both vehicles involved. High Effectiveness: Especially when the ground offers little traction, the kinetic principle plays to its strengths. The "swing" of the rope often overcomes the point where static ropes fail. Robust and Durable: Made from high-quality, specially treated synthetic fibers, the Black Mamba is extremely resistant to abrasion, UV radiation, and moisture. So you can enjoy your reliable companion for a long time. Safe Handling: Reinforced and protected loops at both ends ensure a secure connection with your shackles or recovery points. Why the Black Mamba from Nakatanenga? At Nakatanenga, we know what you need off-road. Our products are field-tested and designed for the highest demands. The Black Mamba KERR Recovery Rope is no exception. It was developed to offer you maximum performance and safety when it really matters. Technical Specifications: Length: approx. 10 m Diameter: approx. 26 mm Breaking Strength: approx. 12,500 kg Color: Black Material: Polyester, braided Braid: Square braid Country of Manufacture: Germany Weight: approx. 5,100 grams Elongation: 25-30% Your Indispensable Companion for Every Off-Road Adventure Whether you occasionally venture off-road or regularly undertake demanding expeditions – the Black Mamba Dynamic KERR Recovery Rope should be a permanent part of your recovery gear. It's compact enough to be easily stowed away, yet strong enough to pull you out of the toughest situations. Don't rely on chance when the going gets tough. With the Black Mamba Dynamic KERR Recovery Rope from Nakatanenga, you have the certainty of being perfectly equipped for almost any recovery situation. Get your Black Mamba now at the Nakatanenga Offroad Shop and drive into your next adventure with added safety and confidence!

Black Mamba XL: The Ultimate Kinetic Force – Dynamic KERR Recovery Rope with 22.6 Tons from Nakatanenga Imagine your heavy expedition vehicle, your mighty Unimog, or your fully loaded off-road truck is hopelessly stuck. In moments like these, where standard recovery equipment reaches its limits, you need a solution that knows no compromises. This is where the Black Mamba XL Dynamic KERR Recovery Rope from Nakatanenga comes into play – the ultimate insurance for the really tough cases and most extreme off-road challenges. KERR Technology for Heavyweights – Why XL Makes the Difference You may already know the advantages of KERR (Kinetic Energy Recovery Rope) recovery ropes: the ability to stretch under load, store kinetic energy, and then release it gently and powerfully to the stuck vehicle. The Black Mamba XL takes this principle to the extreme. With vehicles of high tare weight, the forces involved are enormous. A static rope would lead to brutal shocks here, putting extreme strain on material and people. The Black Mamba XL, on the other hand, absorbs the energy of the pulling vehicle like a gigantic muscle pack and unleashes it in a controlled manner to free even colossal vehicles from their predicament. The Brute Power of the Black Mamba XL – 22.6 Tons That Leave No Questions Unanswered With an almost unbelievable breaking strength of 22.6 tons, the Black Mamba XL is designed for absolute heavyweights. Whether it's heavy trucks in off-road use, large agricultural and forestry machinery, or fully equipped expedition mobiles of the highest caliber – this rope is your reliable partner when it comes to mobilizing massive forces. This extreme load capacity gives you the certainty of not being let down, even in the most hopeless situations. Dynamics that Protect and Perform – Even in Extreme Ranges: Maximum Protection, Maximum Effect: Despite the immense forces, the dynamic elongation of up to 30% ensures a comparatively gentle energy build-up and controlled power delivery. This protects recovery points, frames, and drivetrains even during the heaviest recovery operations. Superior Effectiveness: Especially when vehicles weighing tons get stuck in the deepest mud, soft sand, or snow, the Black Mamba XL unfolds its full potential. The kinetic "whip effect" is often the only thing that still helps. Extremely Robust and Indestructible: Made from specially selected and treated high-performance synthetic fibers, the Black Mamba XL is designed for maximum resistance to abrasion, cuts, UV radiation, and moisture. A tool for life under the toughest conditions. Safe and Professional Handling: The massively reinforced and specially protected loops at both ends are designed for the highest loads and ensure an absolutely secure connection with heavy-duty shackles or recovery points. Why the Black Mamba XL from Nakatanenga? At Nakatanenga, we understand the extreme demands you and your equipment face in heavy off-road use. Our products are tested under the toughest conditions and are designed for professional demands. The Black Mamba XL KERR Recovery Rope is the quintessence of our experience in heavy-duty recovery. Impressive Technical Data: Length: approx. 15 m Diameter: approx. 36 mm Breaking Strength: approx. 22,600 kg Color: Deep Black (typical Black Mamba) Material: High-performance polyester, specially braided (Square Braid) Country of Manufacture: Germany (Quality Assurance) Weight: Not insignificant, but appropriate for the performance (17.4 kg) Elongation: approx. 25-30% Your Ultimate Saviour for Extreme Missions If you're on the move with heavy equipment and don't want to compromise on the safety and performance of your recovery gear, the Black Mamba XL is your first choice. It's designed for professionals in commercial use, for ambitious overlanders with large vehicles, and for anyone who knows that you need extreme equipment for extreme situations. Don't rely on standard solutions when you're moving a heavyweight. With the Black Mamba XL Dynamic KERR Recovery Rope from Nakatanenga, you have the absolute certainty of being equipped for every conceivable recovery situation in the heavy-duty sector. Secure the unsurpassed power of the Black Mamba XL now in the Nakatanenga Offroad Shop and master even the greatest challenges with supreme composure!

Kinetic recovery rope KERR, 8m long If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our orange KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange Length: 8 mDiameter: 19 mmBreaking strength: 8.6 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange (the rope is available in color olive here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.