Strong window for strong ropes In the module chain from the winch to the hook, winch windows play an important but often underestimated part. Once you have opted for ultra-light but high-strength synthetic mountain equipment, the rope windows are indispensable for safe and comfortable use. But winch window is not the same as winch window: a quality product improves handling and extends the service life of the ropes even more. That's why we now set up our own Nakatanenga winch window made of hard anodized aluminum. Harteloxal is an electrolytically produced outer layer which, in addition to improved wear, corrosion and UV protection, also achieves excellent sliding properties. With these characteristics, the rope window conforms to military standard MIL-A-8625F TYPE III. In addition, our winch window is also significantly lower than many other products on the market. This guarantees a smaller bending angle when the rope is rolled up. This protects the synthetic fibers and ensures that dirt is wiped well before the rope winds on the roll. The Nakatanenga winch window can be ordered bundled with the 30m synthetic rope in gray or orange, with or without winch hooks. Material: aluminum, hard anodizedColor: dark grayHole spacing: 10 inches / 254 mm The Nakatanenga winch rope is available in gray or orange. In the bundle, the rope is also available with the matching winch hook and winch window made of hard anodised aluminum - the bundle can be found here.

Anyone who has opted for high-performance synthetic materials for mountain equipment will benefit from cascading solutions. One steel part after the other can be replaced in the module chain with lightweight and synthetics. With the decision to use a synthetic winch rope, the classic deflection pulley, with its wearing parts, the high weight and the tendency to get stuck, also had its day. With so-called NMP pulleys - "No Moving Parts" - nothing rolls anymore. In principle, it is only a rope guide block, through which synthetic ropes glide easily, even under high loads, due to the low frictional resistance. This does NOT work with steel cables! Our Nakatanenga Heavy Duty pulley made of hard anodized aluminum for ropes from 8-14 mm is manufactured according to military standard MIL-A-8625F TYPE III, has a breaking load of 18 t and weighs only 1.65 kg. The large radius of the "reel" is particularly important in the off-road area, since dirt and foreign objects cannot easily affect the cable routing.  The NMP roll is fastened with the supplied 10 mm thick soft shackle with a breaking strength of up to 12 t, optionally in gray or orange. You can also order the pulley individually, without shackles.

Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winchWinch cover Roller rope window cover

Cover for winches Winches are by their very nature tough pieces of equipment but as with most mechanical devices, it is easy to underestimate the negative effects caused by exposure to weather, chemicals and physical strains. Rainwater, ice, salt, mud and gravel can affect more than just the looks of your winch. In the worst case, constant exposure to environmental stresses can reduce the performance by a few, possibly decisive percent. Synthetic winch ropes for instance are especially vulnerable to UV radiation. An increasing number of technical experts are therefore calling for mandatory covers for car winches. Our protective winch cover will help you shield your expensive kit from unnecessary damage and will keep it shipshape for your next mission. The softshell cover is light and elastic, fitting most winches by various brands. As with most of our textile products, the cover is quality Made in Germany.  Dimensions: 48 cm x 7/20 cm x 20 cm (LxWxH), suitable for many winch types and brands, measured unstretched Material: softshell

Winch incl. winch window, plastic rope and winch hook The strongest and fastest winch in this design. With its low weight and compact dimensions, it is perfect for vehicles with a total weight of up to 6 tons. In contrast to its predecessor, this model has a gear brake instead of a drum brake. The gear brake does not wear out compared to the drum brake and loses no braking effect when used for a long time. With the 2-speed gearbox, the winch manages almost 50m / minute! Furnishing: 2-speed gearbox with high-speed gear Remote control 1x cable 1x radio integrated (delivered without battery) Potted reinforced relay (contactor) waterproof stable powder-coated contactor housing made of deep-drawn sheet metal Motor & gearbox IP67 sealed by groove with sealing ring removable control unit (so that the control can be installed as desired) Freewheel lever * Gearbox neutral - 1st gear - 2nd gear Cross struts and equipment made of stainless steel reinforced rope drum ** (suitable for use with plastic ropes) powder-coated aluminum die-cast housing motor / gearbox transmission brake Cable length: 1.6 m Cable cross-section: 35 mm² 3 year guarantee operation manual * A freewheel lever is used to decouple the gearbox and to unwind the winch quickly by hand. ** Plastic cables load the cable drums laterally by far more than steel cables Technical specifications: Working range voltage: 10-16 Volt Max. Power consumption 500 Am ** Train speed without load 15/41 m / minute Traction 5,400 kg ** 3-stage planetary gear 267/86: 1 geared down Net weight: 32 kg without rope and rope window 5.4 KW Series Wound Motor * Drum (ØxLength): 63x223 mm Overall size (LxWxH): 637 x 160 x 254 mm * Series motor with electrically generated magnetic field, power = with a standard 70 AH battery ** Values ​​can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. Material:The cable winch is made of aluminum and high-strength stainless steel. High strength so that the steel can withstand the loads. This steel can also oxidize, i.e. if the parts are exposed to salt in winter, you should care for them every now and then and let them in with a thin oil film. We have to do that maintenance instructions are provided in the download area. The pulling force of the winch is highest on the first or lowest rope layer on the drum. Similar to a bicycle gear shift. The less rope there is on the drum, the slower the winch pulls and the more power it has. first gear low speed second gear high speedRope pull speed Speed ​​Rope pull speed1 5,440 9 m / min 1 870 25 m / min2 4,340 11 m / min 2 694 30 m / min3 3,605 13 m / min 3 676 35 m / min4 3,080 15 m / min 4 490 41 m / min Scope of delivery:1 x winch1 x winch rope - optionally in orange or gray1 x winch window1 x winch hook

SUPERWINCH SX 10SR The 12 V Superwinch electric winch SX 10 SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads.Features:Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control boxScope of delivery:     1 x cable winch     1 x synthetic fibre rope 9.5 mm/ 24 m       1 x cable mouth     1 x relay box     1 x battery cable     1 x cable remote control     1 x radio remote control  

Radio remote control for 12 V cable winches for a wide range of cable winches  for internal mounting on the relay box   Thanks to the radio function, the cable winch can be operated without tangled cables.Note:An A23 battery is required for the remote control. The battery is NOT included in the scope of delivery.

Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable  cable harness  complete cable winch control radio remote control (supplied without battery)  cable remote control mounting plate complete with installation material  installation material  installation & operating instructions  TÜV parts certificate.

Cable winch set for Lada Niva / TaigaIncluding complete installation set The extremely robust bumper fits the original stops on the Lada. Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below.In the case of other vehicle types, the TÜV must be contacted in advance as to whether the part is entered as the equipment carrier. Technical data cable winch:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 210: 13-stage planetary gear Generally: Hornrope 7 to plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmNet weight: 32.8 kgGross weight: 35 kg Furnishing:Aluminum rope windowExtremely durable powder coatingStainless steel one-way clutch (decouple the gearbox to quickly unwind the rope by hand)Control box removable for mounting not directly on the winch Included accessories:Remote control with cableRope windowhookFixing screws 4xM10 We grant a 3-year guarantee on the gearbox and drum in compliance with the guarantee and service regulations. TÜV certificate is for the following vehicles:     Vehicle type            ABE / EG-BE no.     Variant / version212140                    e2 * 93/81 * 0183 * ..        all212140                    e2 * 98/14 * 0051 * ..        all21214                      e1 * KS * 0004 * ..           all2121A                     e1 * KS * 0008 * ..            all2121                        e2 * 98/14 * 0183 * ..        all2121                        e2 * 2001/116 * 0260 * ..   all2121 **** DA            e2 * 2001/116 * 0326 * ..   all2121DE                   e1 * KS07 / 46 * 0021 * ..  allM2121                    e2 * KS07 / 46 * 0011 * ..   allN2121                     e2 * KS07 / 46 * 0012 * ..  allM2131                    e2 * KS07 / 46 * 0077 * ..  all

Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below! Technical specifications: Engine:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 166 : 13-stage planetary gear General data:Max pulling force: 3600 kgMaximum train speed: 5,5 m / min (measured without load)Plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:cable remote controlfairleadmounting screwsoperation manualhookBumpers spacers TÜV certificate for the following vehicles: Vehicle type         ABE / EG-BE no.         Variant / version212140                  e2 * 93/81 * 0183 * ..                 all212140                  e2 * 98/14 * 0051 * ..                 all21214                    e1 * KS * 0004 * ..                     all2121A                   e1 * KS * 0008 * ..                      all2121                     e2 * 98/14 * 0183 * ..                 all2121                    e2 * 2001/116 * 0260 * ..            all2121 **** DA        e2 * 2001/116 * 0326 * ..            all2121DE               e1 * KS07 / 46 * 0021 * ..           allM2121                 e2 * KS07 / 46 * 0011 * ..           allN2121                 e2 * KS07 / 46 * 0012 * ..           allMU2121                 e2*KS07/46*0056*                 allMU2121                e2*KS07/46*0076*                  all      M2131                e2 * KS07 / 46 * 0077 * ..           all

Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see table below! ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! Technical specifications: Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts Transmission:3-stage planetary gearReduction: 166: 1 General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook TÜV for the following vehicle types: Vehicle type      ABE / EG-BE no.       Variant / version212140               e2 * 93/81 * 0183 * ..             all212140               e2 * 98/14 * 0051 * ..             all21214                 e1 * KS * 0004 * ..                 all2121A                 e1 * KS * 0008 * ..                 all2121                   e2 * 98/14 * 0183 * ..             all2121                   e2 * 2001/116 * 0260 * ..       all2121 **** DA       e2 * 2001/116 * 0326 * ..       all2121DE              e1 * KS07 / 46 * 0021 * ..      allM2121               e2 * KS07 / 46 * 0011 * ..       allN2121               e2 * KS07 / 46 * 0012 * ..       allMU2121                 e2*KS07/46*0056*            allMU2131                  e2*KS07/46*0076*           allM2131               e2 * KS07 / 46 * 0077 * ..      all

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

Twin USB 4.2A installation socket, 2x USB, with 2x 2.1A charge current, protective cover. This socket can bei either fitted direcly (dash panel, cubby box, cupboard, etc.) or into a mounting frame (single, double, triple). Please ensure adequate fuse protection! Can also be used in the standard 29mm cigarette lighter recess as used on many vehicles. Comes with lock nut and cover.  

Terrafirma winch bumper Classic for Land Rover Discovery II Incl. two rotating recovery eyes, jacking points and protection of the wiper water reservoir.Suitable for vehicles with and without air conditioning, enables the installation of numerous popular winches from Warn, Tabor, Bearwinch and many more.A parts certificate does not exist, but it is possible to have the bumper registered as a winch carrier by individual approval - please discuss this with your local TÜV or commission us to demonstrate the vehicle!Delivery without winch, winch window or cable, but incl. two rotating recovery eyes.

For Land Rover Defender 90/110/130 with air conditioning, for Superwinch winches, without certification. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

SUPERWINCH TIGER SHARK 9.5 The 12 V Superwinch Tiger Shark 9500 electric winch has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 9.5 electric winch has waterproof sealed relays for high electrical currents, which allow for longer duty cycles.It is used for commercial recovery of rolling loads. Features: Rope speed: 5.7 - 1.2 [m/min]. Pulling force: 4,3 t Voltage: 12 V Weight: 41 kg Power consumption at full load: 340 A Scope of delivery:      1 x winch                optional: 1 x steel cable 8,3 mm/ 29 m or plastic winch cable 10 mm/30 m - optional in orange or grey     1 x winch hook     1 x roller window     1 x relay box     1 x battery cable     1 x cable remote control  

Electrical plug as quick connector Electrical plug in two sizes for 12/24V, 2-pole, as quick connector for winches, jumper cables, etc. The plug is used to lay the battery connections out of the battery box in order to be able to connect the above-mentioned power consumers quickly, conveniently and without the risk of a short circuit.Connection data:Plug small: max. 50 Amp. - max. 5 mm cable diameterLarge plug: max. 175 Amp. - max. 10 mm cable diameterDimensions:Large = length: 8 cm ; width: 5.5 cm ; height: 2.5 cmSmall = length: 5 cm ; width: 3.5 cm ; height: 1.5 cmScope of delivery:Plug (can be used universally as plug or socket).2 contactsProtective cap

Nakatanenga Winch Bumper 2 for Land Rover Defender The new Nakatanenga NAWIBU2 winch bumper is equally suitable for Land Rover Defender 90/110/130 with or without air conditioning. It fits all model years and engine types, such as Td4, Td5, Tdi, Tdci, Puma, 2.5, 2.4 and 2.2. Locally manufactured for us, the winch bumper is powder-coated black and protects the front of the vehicle even during tough off-road use. The two integrated, swivelling recovery eyes are ideally suited for self and external recovery - or for attaching an optional pulley, which doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval. One of the main innovations of the NAWIBU2 bumper compared to its predecessor is the optional possibility to mount two 70mm driving lamps in a recessed position - this way they are optimally protected against damage in the terrain. We use LED driving lights from Nolden, which provide excellent light with low power consumption. They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. If you order the bumper without headlights, the openings for headlights are not present. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. The UNIVERSAL version is suitable for most winches (except Warn 8274, various Ramsey etc.) - here the common winches from Warn, Tabor, Superwinch Talon, Supwinch Tigershark, Bearwinch etc. fit. Delivery includes stainless steel recovery eyes and stainless steel shackles. Please also note our winch bundles with price advantage! Please select below whether and if so in which colour you would like the Nolden 70 mm LED driving lights as well as which winch type you are using: Note: The bumper is not suitable for the Superwinch EXP model series and the WARN Zeon model series and VR EVO

Remote switch - Carlingtech Contura For safety reasons, it is advisable to switch off the electric winch on the off-roader and only switch it on when needed. This is usually done with a disconnect switch in the engine compartment, so that awkward handling is necessary when you want to start the winch. With the switching relay and the switch supplied, this can be done conveniently from the driver's seat without having to lay the winch's power cables there. Only two thin wires are needed, the required switch is included in the delivery, the switching relay is mounted in the engine compartment. It has an additional switch directly on the relay housing and does not consume any power when it is not being switched. A recessed labelling field allows easy identification of the relay. The switch is a very high quality Carlingtech Contura switch (waterproof to IP67 standard), this fits seamlessly into our mounting frames or various consoles such as in the Land Rover Defender TD4 or other vehicles. The relay is designed for a continuous load of 500 A, please check if this is suitable for your winch. According to the manufacturer, a Warn 9.5XP requires 425 A, a Tabor 12K 457 A and the Warn 8274-50 450 A. Technical data:Maximum load capacity (continuous): 500 AMaximum load capacity (5 minutes): 700 AMaximum load capacity (1 minute): 1,100 AMaximum load capacity (10 seconds): 2,500 AVoltage: 10.1-16.5 VCurrent consumption in idle position: 0 mACurrent consumption during switching: less than 7 AConnections: 2x M10 screw boltsDimensions relay: 96x139x52 mmSwitch dimensions: 36x21 mm mounting holeSwitching capacity of the switch: max. 20 A

Factor 55 Winch Lock Assembly The 3 / 8-16 in. Winch lock screw is made of 1045 carbon steel. Thanks to the 60 degree head, the screw can't be removed with ordinary screwdrivers, pliers or commercially available safety inserts. Simply replace your winch mounting bolts with the Factor 55 Winch Locks and your winch is optimally protected against theft! As a replacement for any easily removable 3 / 8-16 " lock screw. The locking screw can be attached to any 1987 - 2014 Jeep YJ, TJ, JK or JL Wrangler with a mounted winch. ✓ Winch Lock✓ Heat Treated 1045 Carbon Steel✓ Zinc Chromate Corrosion Protection✓ Hidden Spring Lock Washer Pocket✓ 60 Degree Head Taper to Prevent Removal with Pliers✓ Simple Fail Proof Design✓ 3 Inches by 3 Inches by 1 Inch, 1 Pound✓ Universal Application for Any Jeep Wrangler

For customers who need a winch on their Land Rover Defender but do not want the classic, martial look of a "normal" winch bumper we've developed the Hidden Winch Mount Kit. It is suitable for all Land Rover Defender 90/110/130 and allows an well hidden mounting of many common winches while maintaining a very "civil" look. In addition to the discreet appearance, the Nakatanenga Hidden Winch Mount Kit has many other product advantages: Improved slope angle of the vehicle by raised corners of the bumper Improved protection of the vehicle front by stable construction Protection of the rope against UV rays (important for plastic ropes!), rain and dust Improved theft protection due to hidden mounting location Suitable for vehicles with or without air conditioning (depending on the vehicle cutouts may be required on the grille) The freewheel of most winches is still accessible (you don't need a winch with an externally controllable freewheel) Integrated underrun protection (optionally aluminium natural or black powder-coated) to protect the steering linkage No repositioning of the license plate We recommend the following winches for use with the Hidden Winch Mount Kit: Superwinch TigerShark 9.5SR Superwinch TigerShark 11.5SR Superwinch Rock 98 Superwinch Rock 12.8 Among other winches, the following winches can not be used: Superwinch Talon Warn 8274 The bumper must be registered in the vehicle documents. This can be done by a fee-based individual acceptance. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.

Nakatanenga cable set winch mounting in Defender In order to facilitate the installation of the winch in the Defender and to minimise sources of error, we have a complete cable set for this purpose mass-produced by a cable harness manufacturer. The cable lengths are adapted to the installation situation in the Land Rover Defender 90/110/130. Due to the cable cross-section of 50 mm², even high currents can be transmitted safely, so that enough current reaches the cable winch and is not converted into heat in the cable. Delivery includes tubular cable lug M10 and battery pole clamp minus M10, for mounting on the vehicle's wiring.

Maximum safety & reliability - 425A replacement fuse for cable winch Winch replacement fuse with 425 amps

Accessory kit for winches Whether as an accessories kit for winching enthusiasts or as handy emergency pack on overlanding trips, our Nakatanenga winching packages contain everything you need when you’re stuck in a rut. You have the choice between a steel version, primarily for steel cables, or the lightweight pack made from synthetics and aluminum, exclusively designed for synthetic winch ropes. Both varieties basically consist of the same components: two recovery straps, a pulley or block, shackles, protective gloves and a bag. The steel rope kit contains two steel shackles, a foldable snatch block with a work load WLL of 3.5 tons and a shoulder bag made from 100 % cotton. The synthetic kit boasts an NMP pulley made from Eloxal coated aluminum, three soft shackles and the Nakatanenga tool bag coated in robust and waterresistant Nylon PU. Straps Key items in the accessory kits are two 77 mm wide, high quality recovery straps. Made from polyamides, these straps come in lengths of 2 and 8 m and have a breaking strength of up to 9 tons. By design, the short strap is also a perfect tree trunk protector. FYI: The long strap is a new addition to the steel set and does not fit the cotton bag. It has to be stored separately. Shackles The recovery straps feature end loops strengthened by machine sewn Polyester coats. The 10 mm soft shackles in orange or gray are fixed through these end loops or “eyes”. The kit contains two soft shackles for this purpose and another one to fix the NMP block. The synthetic shackles are ultra-light and with a breaking strength of up to 12 t extremely loadable. As always, synthetics means little danger of injury, easy handling, no corrosion and no damaging of vehicle and equipment. The steel kit on the other hand uses traditional steel shackles with screw bolts. Pulleys The pulleys or blocks in the two kits differ considerably in design, material and usage. In the synthetics kit, the NMP block made from hard, Eloxal coated aluminum is fixed by a soft shackle and is exclusively meant to be used with plastic winch ropes of 8 to 14 mm thickness. Produced to military standards, this block has a breaking strength of 18 t and weighs only 1.65 kg. WARNING: Again, the NMP pulley must not be used with steel cables. If you are using steel cables, please choose the other kit with the metal snatch block. Our construction of high-strength 6 mm galvanised steel and a 15 mm polymer pulley accepts any type of mountain rope between 8 - 13 mm: Synthetic, plasma and steel ropes.The working load of the pulley is 9,000 lbs or just over 4 t, the breaking load is 19,300 lbs or over 8.7 t and is best suited for steel ropes. Bags The synthetics kit comes in our robust, high quality Nakatanenga tool bag. It’s flexible, very lightweight and uses just as much storage space as the actual contents. That makes it ideal for quick, compact packing and easy transport of all your winching and recovery equipment. Shackles and smaller item fit into separate pockets inside. The steel kit can be stowed in the cotton shoulder bag, with the exception of the long strap. Gloves Last but not least, both sets come with a pair of protective gloves, made from elastic synthetic materials. These sturdy gloves feature grippy Almara plastic leather in the palm area and are not available separately, unlike the rest of the contents.

Winch hook XL white / XXL white Often little attention is paid to an important detail on the winch: the hook. It is of crucial importance for the transmission of power between the winch and the anchorage point and must also be able to be operated safely in stressful situations. We offer two models from the industrial sector that shine with convincing detailed solutions: large radius of the hook so that even double straps can be securely hooked in twice large opening of the hook, it can be placed around most towbars stable cast iron snap (not made of thin sheet metal) that closes securely can be dismantled, thus simple assembly / disassembly of the rope without splicing, e.g. easy cleaning of the plastic rope possible large radius of the rope holder, so ropes with a large diameter and / or rope thimble can be used  Actual weight (XL): 0.750 kg Actual weight (XXL): 1.445 kg While the smaller model XL is designed for winches up to 10,000 lbs traction, the XXL models can be equipped with winches up to 18,000 lbs traction. The minimum breaking load is 18.000 kg or 32.600 kg. The hooks are made of alloyed, tempered steel, grade 8 and are painted. They are suitable for steel and plastic ropes with or without a thimble, the ropes can be installed without splicing. Please select the model. Please note: The delivered color may differ from the pictures.