Dachträger ✓ Viel Stauraum & stabil

CargoBear quick mounting rails for roof tents can be used on various roof racks

CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

Product number: CGB2-RTTMF-2-1-CBM

Weight: 5,0 kg
Parcel shipping

This article is available in different versions

From €255.00*

Select version

Roof rack railing and spoiler

Roof rack NAVIS spoiler RAIL & FLAT PickUp roof rail Alu black:The spoiler reduces the wind noise and is suitable for all NAVIS roof racks. Roof rack railing for NAVIS FLAT PickUp roof rail aluminum black:The matching side rail for the roof rack NAVIS FLAT - suitable for all PickUp models.2 pieces (1x left and 1x right)Color: Black

Product number: NA-HRRPUWI001M

Weight: 20,0 kg
Parcel shipping

This article is available in different versions

€119.00*

Select version

Rear Ladder for Land Rover Defender, short

Rear ladder suitable for Land Rover Defender 90/110 allows for easy access to roof rack. This ladder is supplied WITHOUT an additional rear step. This can be ordered separately. The ladder is produced for us from high-grade aluminium alloy and WIG welded, resulting in a very lightweight (1.8 kg only) and durable ladder. The steps feature an anti-slip design. Available with or without black powder coating. Please choose.

Product number: DT-OTSLT-ELM

Weight: 1,5 kg
Parcel shipping

This article is available in different versions

From €95.00*

Select version

Rear Ladder short with extra step for Land Rover Defender 90/110

This rear ladder with additional step for rear crossmember fits Land Rover Defender 90/110 and allows easy access to the roof rack. This ladder is produced for us from high-grade aluminium alloy and TIG welded, resulting in a very lightweight (only 1.8 kg) and durable product. Steps are anti-slip. The ladder and the aluminum step are powder-coated in black.

Product number: DT-SLT-ELM

Weight: 2,0 kg
Parcel shipping

This article is available in different versions

€215.00*

Select version

Rear ladder for Suzuki Jimny 2 type GJ/HJ, from BJ 2018

CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ

Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Product number: CGB2-SUJI2-LADDER

Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€329.00*

CargoBear - Crossbar sloping/low - for Land Rover Defender

CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector Material: Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights

Product number: CARGOBEAR-DEF-LBS

Weight: 5,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€399.00*

Rear ladder for Mercedes G

Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.

Product number: HLMGLM

Weight: 4,0 kg
Parcel shipping

This article is available in different versions

€379.00*

Select version

Thule Roof Bar for Land Rover Vehicles

Thule roof bar for Land Rover vehicles Thule roof bar for Land Rover vehicles, optionally for Land Rover Defender or Land Rover Discovery 1 / 2, consisting of two crossbars and feet in suitable height for rain gutter mounting.Thule roof racks or roof bars have been synonymous with quality and safety for decades, even under tough conditions. They are therefore ideally suited for mounting roof tents, roof boxes, equipment carriers of all kinds and much more.Technical data: Load capacity: 100 kg (dynamic, i.e. while driving). Max. roof load Roof load: according to vehicle manufacturer's specifications Material feet: sheet steel, galvanised, powder coated, Pebax coating Material of crossbar: Square steel tube, powder-coated Assembly: Quick assembly without tools using central nut Lockable: No, but can be retrofitted with lockable tommy nuts Foot height: Suitable for Discovery I / II or Defender 90 / 110 / 130 Length of cross struts: 150 cm Foot height: 20 cmPlease note the maximum roof load of the vehicle according to the manufacturer's specifications!Please select your vehicle type.

Product number: THULELR-DEFM

Weight: 12,0 kg
Parcel shipping

This article is available in different versions

€229.00*

Select version

Thule Knebelmuttern, abschließbar

Thule toggle nuts, lockable Protect your roof racks from theft! The ideal addition to our Thule racks for Land Rover Defender and Land Rover Discovery 1 / 2 are the lockable toggle nuts.The set contains 4 tommy nuts with keyed alike stainless steel locks and matching keys. The locks are compatible with the Thule One Key System if other Thule products are used.

Product number: THULE4LOCK

Weight: 1,0 kg
Parcel shipping

Delivery time 10-15 working days

€74.00*

Off-road Roof Racks & Platforms - robust & modular by Nakatanenga

High-quality off-road roof racks & platforms for Defender, G-Class & more. Discover robust aluminium & steel racks, modularly expandable. Shop now at Nakatanenga!

Off-road Roof Racks & Platforms: More Space for Your Adventure

Storage space in an off-road vehicle or overlanding rig is often limited, especially when heading out on long tours, expeditions, or off-road holidays. A robust off-road roof rack or a versatile roof platform from Nakatanenga is the ultimate solution for transporting additional gear securely, efficiently, and within easy reach. Whether it's a roof top tent, spare wheel, jerry cans, equipment boxes, or sports gear – the right roof rack creates valuable space and prepares you for anything.

Why Choose a Specific Off-road Roof Rack from Nakatanenga?

Standard roof racks often can't withstand the stresses encountered off-road. Our off-road roof racks are specifically designed for the harsh conditions found away from paved roads:

Extreme Stability and Load Capacity: Our racks are engineered to safely carry heavy loads even under strong vibrations and vehicle body flex encountered off-road. They provide a solid foundation for roof top tents, heavy equipment, and more.
Robust Materials: We rely on high-quality materials such as high-strength aluminium (lightweight and corrosion-resistant) or extremely tough steel, often featuring durable coatings (e.g., powder coating) to resist weather and mechanical stress.
Intelligent Mounting: Vehicle-specific mounting systems ensure optimal load distribution onto your vehicle's roof structure or rain gutters (e.g., for Land Rover Defender, Mercedes G-Class and many more).
Modularity and Flexibility: Many of our roof racks, especially the roof platforms, feature a modular design. With accessory channels (e.g., T-slots) and extensive accessories, you can perfectly adapt the rack to your needs – for jerry can holders, spare wheel mounts, awnings, light mounts, and much more.
Aerodynamics and Design: We strive for a low-profile and aerodynamic design to minimize wind noise and reduce additional fuel consumption, without compromising on stability.

Our Range: The Right Roof Rack for Every Vehicle and Purpose

At Nakatanenga, you'll find a carefully selected range of roof rack systems:

Aluminium Roof Racks: Lightweight, rustproof, yet extremely stable – ideal for most applications and for saving weight.
Roof Platforms: Flat, versatile rack systems offering maximum flexibility through mounting channels and accessories. Ideal for roof top tents and customized load configurations.
Vehicle-Specific Roof Racks: Perfectly tailored for models like the Land Rover Defender (Td4, Tdi, Td5), Mercedes G-Class, and many other common off-road vehicles.
Extensive Accessories: From fitting kits and brackets to wind deflectors, you'll find everything to make the most of your roof rack.

Quality and Expertise for Your Transport Solution

A roof rack is an investment in the functionality and safety of your vehicle. At Nakatanenga, you benefit from our years of experience in the off-road and expedition sector. We only select products that meet our high standards for quality, durability, and practicality.

Explore Our Selection of High-Quality Off-road Roof Racks and Platforms Now!

Find the perfect rack for your vehicle and your adventures. Equip your off-roader or overlander for the next journey and create space for everything you need to bring along. If you have questions about choosing the right rack (e.g., Defender roof rack, G-Class roof rack) or the appropriate accessories, we are happy to advise you!