Folding Tent Lightweight

Montagepauschale für die Nakatanenga Roof Lodge Dachzelte in unserem Hause. Wahlweise mit oder ohne Einweisung (wählen Sie bei der Bestellung bitte die passende Variante aus) Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Roof Lodge Lightweight 140 Basic roof tent - the complete package This offer already includes all the accessories that make travelling with a car roof tent even more comfortable. Just decide on a mattress and the optional awning.   The following accessories are already included in this complete roof tent set: 3D mesh mattress underlay (10mm; optional with our Saar foam mattresses) - the icing on the cake when it comes to sleeping comfort in the roof tent. This underlay also prevents condensation, which is typical of roof tents with closed windows. Ladder levelling feet - a secure stand of the ladder, independent of the ground, helps to avoid damage to the roof tent. Stowage net - for all the things you prefer to stow away outside the roof tent. LED tent lighting The LIGHTWEIGHT roof tent - the technical components: >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> Tent skin and awning: 102 g/sqm technical RipStop nylon, Oxford weave, PU-coated outwardly curved 25mm aluminium poles ensure noticeably higher stability of the roof tent and better water drainage Thermoplastic honeycomb floor; German brand product 2 "lockable" roof windows with mosquito protection fine-mesh mosquito protection on all windows and the entrance Aluminium sliding ladder Choose a mattress: one-piece mattress (60mm thick; also available with optional 3D mesh mattress base); available in two hardnesses; specially developed by Saar-Schaum (Germany) for use in folding tents. standard mattress: recommended for persons up to 100 kg or those who like to lie softer hard mattress: recommended for people over 100 kg or those who like to lie harder Self-inflating mattress Also available: our optional awning Sidewalls: 102 g/sqm technical RipStop nylon, Oxford weave, PU coated. Height awning/annex room 200cm Footprint 140 cm x 130 cm 4 side walls that can be rolled up or opened out independently of each other; the side walls can be joined by means of the zips and you get a 5-sided enclosed space the lighter fabric lets a pleasant amount of light into the awning Product description Light Roof Tent LIGHTWEIGHT Why and for whom a Roof Lodge LIGHTWEIGHT roof tent? For car campers and roof tent enthusiasts, roof loads are often a (ge)important issue. If you take it lightly, you risk roof damage. But away from the play on words and towards the bare figures, because the trend is clear: the average dynamic roof loads of vehicles are falling. While the G-Class with 200 kg and the new Defender with up to 168 kg are still solid values, things go downhill pretty quickly after that. Even a new Land Cruiser J150 Prado only manages 80 kilos, and in the normal passenger car segment the average is closer to 60 kilos, with a downward trend. In addition to changes in vehicle statics due to lightweight construction and electrification, the increased use of sensors and assistance systems is probably responsible for this. And even if the values for a stationary vehicle are of course considerably higher, the critical range for commercially available roof tents is approaching. At Nakatanenga, we are reacting to this development at an early stage and have therefore developed the Roof Lodge Lightweight, an ultra-light roof tent which, with a total weight of only approx. 46 kg, weighs a record low on the scales or the car roof. Of course, there are no restrictions on the space, comfort and weather protection you are used to from our Roof Lodges. How does it work? What is the difference between the LIGHTWEIGHT roof tent and our EVOLUTION 2 folding tents? >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> First of all, we use 100% Oxford nylon with ripstop for the skin of the Lightweight, an extremely strong but surprisingly light material that weighs in at only 102 g/m2. Compared to the 320 g/m2 on our Evolution 2, this is a reduction of a whopping 78%. The fabric of the tent skin and the sun awning of the Lightweight are identical, PU-coated on the inside and impregnated on the outside. This means that no compromises are made in terms of wind and rain protection. How can weight be saved on the roof when travelling with the roof tent? Further weight can be saved on the Roof Lodge Lightweight by choosing the mattresses. As an alternative to our one-piece standard foam mattress (60 mm, approx. 5 kg) and the optional 3D mesh mattress (approx. 3.5 kg), we also offer a self-inflating Kampa mattress with a thickness of 10 cm and a weight of approx. 5.5 kg. The 10 cm thickness of the air mattress has been chosen so that, with a lower total weight, a comparable lying comfort and similar insulation properties to the combination of foam mattress with mesh underlay are given. Last but not least, the aluminium ladder can be removed and transported inside the car, which reduces both the roof load and the overall height of the vehicle. On car ferries, for example, 10 cm less height can often make a money-saving difference. Anyone who would like to go on a road trip with their own roof tent in times of limited contact, but does not have heavy four-wheel drive vehicles and would like to experience this adventurous way of travelling in the best sense of the word with station wagons, SUVs and even smaller cars up to hatchbacks, will be delighted with the Roof Lodge Lightweight. This item is bulky goods. The stated shipping weight differs from the actual item weight. The actual item weights are: Roof Lodge Lightweight with self-inflating mattress: approx. 47 kg. Roof Lodge Lightweight with standard mattress: approx 49 kg Roof Lodge Lightweight with standard mattress and 3D mesh underlay: approx. 52 kg Save weight during the journey and stow the following items inside the vehicle: Ladder: approx. 4.3 kg Self-inflating mattress: 5,2 kg Saar foam mattress: 5 kg (standard) and 7kg (hard) Saar foam mattress with 3D mesh underlay: 8kg and 10kg respectively  

Sample fabrics roof tent 2023/'24: Are you not quite sure whether the tent fabric or its colour is right for you? Then take advantage of our free sample service - free shipping and no minimum order value within Germany.Which fabric is which? Format of the free fabric samples: approx. 5 cm x 5 cm each. Black mesh: Mosquito net Light beige fabric: Awning 102 g/m² -> Roof Lodge Lightweight roof tentDark olive fabric: Tent fabric 102 g/m² -> Roof Lodge Lightweight roof tent Dark blue fabric: Tent fabric 320 g/m² -> Roof Lodge Evolution2 roof tentCoyote fabric: 320 g/m² tent fabric -> Roof Lodge Evolution2 roof tentStone grey fabric, metal-coated on one side: Awning 280 g/m² -> Roof Lodge Evolution2 roof tentPVC clear: Windows (Please note: PVC should never be treated with alcohol or alcohol-based cleaners! Only use clear water or a cleaner approved for PVC for this purpose)TPU kaki: Roof tent canopy (2021; on request)PVC black: Roof tent cover (2023/'24) - not included in the booklet! Tent skin of the lightweight tent made of 100% Oxford nylon with ripstop, an extremely strong but amazingly light material weighing just 102 g/m². Compared to the 320 g/m² fabric of our Evolution 2, this is a reduction of a whopping 78%.  The tent skin and the awning of the Lightweight are identical in terms of fabric, PU-coated on the inside and waterproofed on the outside. This means that no compromises are made in terms of wind and rain protection.