Universal storage space set for the spare wheel The high school of storage space optimization really only begins when all the obvious places like the interior or trunk or the roof have long since ceased to offer anything. With our practical and universally applicable spare wheel tray, even the fifth wheel on the car becomes an equipment carrier. The practical storage solution for the spare wheel at the rear consists of two components that can be ordered individually (here in the store) or as a set. The base carrier with the tensioning strap is adjustable and thus fits all common off-road tire sizes. If one mounts only the basic carrier (sideways), so e.g. starting aids, wheel chocks and other accessories can be screwed to the carrier or attached with straps. If you want to mount the tray, i.e. the basket, the base carrier must be on top of the wheel. The loading area of the storage basket is a generous 80cm x 38cm, so that even larger equipment can find its place here. If this area is not enough, you can also turn the platform around and attach with the edge down. Raised edges and circumferential lashing holes ensure problem-free load security. Base carrier and storage basket are black powder-coated, so that the look of the spare wheel tray harmonizes perfectly with any off-roader. Base carrier: approx. W 38.8cm x D 20cm x H 15.5cmLoading area: approx. W 80cm x D 38cm x H 5cm Note: Distribute the load centrally or evenly on the platform. Pay attention to the condition of your door hinges when loading the platform! It is extremely important to secure the strap as tightly as possible in a locked position so you do not lose your equipment. We are NOT responsible for the use or misuse of the racks and damaged vehicles or lost items due to improper assembly and inspection of the load prior to travel.

CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg Please note: The storage rack is NOT suitable for the  90, 110 Defender with 7 seats (as the belt system blocks the side panels), 130.

Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg

Spare Wheel Bracket Cover Rear Door New Defender   If you’re driving your New Defender mostly short distance and in city traffic, you will most likely have thought about removing the enormous spare wheel from the cargo hold door. For one, it impedes your all-round view in dense traffic and when you’re parking it makes your already sizable Defender that much longer. So, if you decide to do without your spare wheel, we have an equally elegant and flexible solution for you to cover the wheel mount openings in the rear door. Two perfectly fitted black steel covers - available in smooth or tread plate – are simply screwed into the original mount holes, making your Defender’s rear look like nothing’s missing. Should you need your spare wheel re-installed for longer trips, removing the covers is a matter of minutes. Furthermore, if you wish to paint the covers in your vehicle’s color, it is a perfectly simple job for both paint professionals and DIY enthusiast. The black powder coating serves as a perfect primer layer. Scope of delivery: 2 x aluminium sheets, black powder-coated, available in smooth or corrugated.Fixing material Please note: The screws may only be tightened hand-tight! Max. 5Nm! <iframe width="560" height="315" src="https://www.youtube.com/embed/rhPTpwBGm7k?si=iVsQa9mPYfvMNwZA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating Further keywords for this item: cargo-bear, cargobear, CargoBear, roof-rack, roof rack