Side steps available for: Defender 110 & 110 Hard Top - from 2020 Defender 130 - from 2020 Side running boards and door sills, black powder-coated, with anti-slip tape and stainless steel filler plates. Designed for mounting on the existing brackets in the sill.The plastic sill covers need to be slightly modified to gain access to the fixing points. An adapter is supplied for use with the original jack.

Bulkhead conversion kit Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle. Note: We are already developing a perfectly matching net as a partition wall.

Lockable tank cap When fuel prices are high, opportunistic fuel thefts skyrocket and this affects us both at home and when traveling abroad. Furthermore - especially in our cities - SUVs and 4x4s are preferred targets for sabotage and vandalism by supposed climate activists and other thugs. Under these circumstances, it is hard to understand why high-priced cars such as the New Defender (from MY2020) do not come with lockable fuel filler caps. If you want to prevent thieves and saboteurs from gaining easy access to your fuel tank, we offer a lockable replacement cap with two keys. In addition to the New Defender, this lockable fuel cap fits the following models: Discovery 3 MY2004-2009Discovery 4 MY2009-2016Discovery5 from MY2014Discovery Sport Typ LC ab BJ2015 Range Rover (not Vogue) from MY2007Range Rover Evoque L538 MY2011-2018Range Rover Hybrid L405 from MY2013Ranger Rover Sport from MY2007Range Rover Velar from MY2017 Defender from MY2020 Jaguar E-Pace X540 from MY2017Jaguar F-Pace X761 from MY2016Jaguar F-Type (not USA) X152 from MY2013Jaguar XE from MY2015Jaguar XF from MY2007Jaguar XJ X351 MY2010-2019Jaguar XK Cabrio from MY2006Jaguar XK Coupe from MY2006

Wind deflector ClimAir Land Rover New Defender TYPE L663, front Off-road vehicles are not designed for aerodynamics and invertebrate air currents, of course. This is rarely noticeable when driving, because you usually don't even get into the corresponding speed ranges. However, there is one aspect where the Defender's rustic box shape very quickly reveals annoying disadvantages and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the ventilation in the Landy is weak and the windows mist up, you're glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the car. This annoys even the most hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the New Defender 90 provide an immediate remedy and guarantee improved fresh air supply and a pleasant interior climate in all seasons. The screens made of cast acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when traveling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke gray and black and are supplied with a general operating permit (ABE). Installation is a matter of minutes with the enclosed instructions. Suitable for New Defender 90!

Molle panel for the rear window - damage-free installation without drilling The bigger the vehicle, the greater the temptation to leave everything lying around. But especially in space monsters like the New Defender with its maximum load compartment volume of over 2500 litres (in the 130), it is extremely important to keep everything tidy and have quick access to equipment and accessories. Our modular panel for the rear window is the perfect organiser for the most important and most frequently used equipment. The aluminium window panel is simply attached to the window using suction cups and is compatible with all Molle products in our range. The possibilities for combination and personalisation are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, this modular panel makes it possible. FixPlus Straps are also a good addition. And if you don't need the panel at the moment or if you sell the vehicle, it can be dismantled without leaving a trace. Material: ALUMINIUM Scope of delivery: 1 vehicle panel incl. fastening material

Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg

Storage compartment footwell for Land Rover Defender TD4/TD5 Every Landy draws attention, for sure, but often enough it’s the unwanted kind from thieves and car burglars. That’s where this nifty and inconspicuous modification comes in for Defender models Td5 and Td4 (90/110/130) – whether camping conversion, expedition vehicle or your regular standard spec Landy. Our hidden underfloor locker for the front footwell is integrated in the floor panel and thereby creates a lot more security for your valuables. Secured by a lock, dust- and watertight and in most cases hidden by floor mats, the underfloor boxes are the ideal storage space for all those extremely important small things: documents, passports, wallets, expensive electronics, gadgets, tools, medication etc. Sporting a volume of ca. 7 liters, this roughly square storage box will hold an astounding amount of your most valuable items. Since the boxes are mounted underneath the footwell floor, we make them from extremely robust, powder-coated stainless steel. Installing the assembly kits for Td5/Td4 in the right or left front seat footwells is really simple. Other areas in the vehicle body are also suitable for mounting the locker, the cargo hold for example. In these cases, you can order the box also without the panel. If you own non-standard Defenders or older models, where the Td5/Td4 panels won’t fit, you should also choose the “locker only” option. The same applies if you simply want to make the cuts yourself in the existing floor panels. Important during installation: the flattened edge of the box must always face the centre of the vehicle during installation! Please note, if a tank or other additional attachments are mounted below the bottom plate, it is not possible to mount the storage box. Material: Box: Stainless steelFootwell panel: Aluminum

Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.