Spare Wheel Bracket Cover Rear Door New Defender   If you’re driving your New Defender mostly short distance and in city traffic, you will most likely have thought about removing the enormous spare wheel from the cargo hold door. For one, it impedes your all-round view in dense traffic and when you’re parking it makes your already sizable Defender that much longer. So, if you decide to do without your spare wheel, we have an equally elegant and flexible solution for you to cover the wheel mount openings in the rear door. Two perfectly fitted black steel covers - available in smooth or tread plate – are simply screwed into the original mount holes, making your Defender’s rear look like nothing’s missing. Should you need your spare wheel re-installed for longer trips, removing the covers is a matter of minutes. Furthermore, if you wish to paint the covers in your vehicle’s color, it is a perfectly simple job for both paint professionals and DIY enthusiast. The black powder coating serves as a perfect primer layer. Scope of delivery: 2 x aluminium sheets, black powder-coated, available in smooth or corrugated.Fixing material Please note: The screws may only be tightened hand-tight! Max. 5Nm! <iframe width="560" height="315" src="https://www.youtube.com/embed/rhPTpwBGm7k?si=iVsQa9mPYfvMNwZA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg Please note: The storage rack is NOT suitable for the  90, 110 Defender with 7 seats (as the belt system blocks the side panels), 130.

Universal storage space set for the spare wheel The high school of storage space optimization really only begins when all the obvious places like the interior or trunk or the roof have long since ceased to offer anything. With our practical and universally applicable spare wheel tray, even the fifth wheel on the car becomes an equipment carrier. The practical storage solution for the spare wheel at the rear consists of two components that can be ordered individually (here in the store) or as a set. The base carrier with the tensioning strap is adjustable and thus fits all common off-road tire sizes. If one mounts only the basic carrier (sideways), so e.g. starting aids, wheel chocks and other accessories can be screwed to the carrier or attached with straps. If you want to mount the tray, i.e. the basket, the base carrier must be on top of the wheel. The loading area of the storage basket is a generous 80cm x 38cm, so that even larger equipment can find its place here. If this area is not enough, you can also turn the platform around and attach with the edge down. Raised edges and circumferential lashing holes ensure problem-free load security. Base carrier and storage basket are black powder-coated, so that the look of the spare wheel tray harmonizes perfectly with any off-roader. Base carrier: approx. W 38.8cm x D 20cm x H 15.5cmLoading area: approx. W 80cm x D 38cm x H 5cm Note: Distribute the load centrally or evenly on the platform. Pay attention to the condition of your door hinges when loading the platform! It is extremely important to secure the strap as tightly as possible in a locked position so you do not lose your equipment. We are NOT responsible for the use or misuse of the racks and damaged vehicles or lost items due to improper assembly and inspection of the load prior to travel.

Slot nut for gutter/rail for New Defender Slot nut for NewDefender 1x M8 thread Stainless steel suitable for NewDefender Rail

Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For the CargoBear, we offer ready-cut, self-adhesive anti-slip pads measuring 16 x 24 cm individually or in sets of 3, 6 or 12. Please note: the multi-packs provide increasing savings regarding the price per item. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.