Shop by vehicle
POWERspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, clutch kit
POWERspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012 Clutch Kit The POWERspec is the next stage up, ideal if you use your Isuzu Rodeo as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Rodeo Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches POWERspec clutch series III
POWERspec Series III At LOF clutches, POWERspec is the next step up from ROADspec when it comes to performance. If your Series III Land Rovers tows regularly or carries extra weight as an expedition truck then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a high torque sprung center hub and an EXTREMEspec release bearing for heavy duty tasks. Description: Heavy Duty thermofiber friction naterial High torque sprung centrer hub LOF Clutches EXTREMEspec release bearing G90 high temp assembly grease syringe CNC wire-formed bearing retainer clip High tensile bolts
Prices incl. VAT;
Rocksliders for Suzuki Jimny FJ Side Step
Side skirts with aluminum steps or steel The robust side skirts protect your Jimny off-road. The kicks were chamfered so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum / or steelColor: black powder-coatedSize: 129x41x28 cmWeight: 7.60 kg / 22 kg
Prices incl. VAT;
Land Rover Defender front windscreen, green with blue top tint, for all Defender 90 / 110 until MY2016
High-quality windscreen for Land Rover Defender 90/110 - green tinted with blue wedge This robust windscreen made of 2-layer laminate is specially designed for all Land Rover Defender 90 and 110 models. The green tint reduces glare and heat radiation inside the vehicle, while the integrated blue wedge in the upper area offers additional protection from low sun - ideal for longer journeys and off-road use.The high-quality laminate glass not only offers increased break resistance, but also contributes to noise insulation. The windscreen is manufactured to fit perfectly and can be easily inserted into original frames and seals.Product features: Suitable for all Land Rover Defender 90/110 2-layer safety laminate - Green tinted with blue wedge Improved sun and heat protection Increased safety and stability Please note: This item can only be collected locally in Berg near Neumarkt (postcode: 92348) - shipping is not possible! Please make an appointment in advance for collection/assembly.Please contact us by e-mail or telephone.info@nakatanenga.dePhone: +49 9181 466 644
Prices incl. VAT;
Defender winch bumper
Ideal for off-road use, expeditions or professional rescue operations This high-quality winch bumper was specially developed for the Land Rover Defender and combines extreme robustness with functional design. It not only offers reliable protection off-road, but is also optimally prepared for the installation of a winch. Whether in the deepest terrain, when overcoming difficult passages or for self-recovery - this winch bumper is your reliable partner when it counts.Heavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grilleHeavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Shift travel shortener for Land Rover Defender from 7A000001
Shift travel shortener for Land Rover Defender from 7A000001 onwards For Land Rover Defender from 2007 (Puma/TDCI) with MT82 manual gearbox (6-speed manual gearbox), for Defender from 7A000001 onwards.
Prices incl. VAT;
POWERspec Suzuki Jimny GEN2 1.5L, from MY 2018, clutch kit
POWERspec Suzuki Jimny GEN2 1.5L, from MY 2018, clutch kit The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Jimny Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches POWERspec Mitsubishi L200 2.5 DI-D, MY2006-2016, B40 Clutch Kit
POWERspec Mitsubishi L200 2.5DI-D, MY2006-2016, B40 Clutch Kit The POWERspec is the next stage up, ideal if you use your L200 as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD Release bearing 9x Clutch cover bolts, coated in loctite 1x Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, Aluminium, 6mm
Transmissionguard, Aluminium 6 mm, for Land Rover Defender TD4 90/110/130, from MY '07 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
MOMO TUNER STEERING WHEEL - SILVER, incl TREKFINDER steering wheel hub
Stylish MOMO TREK R steering wheel with chrome spoke and TREKFINDER hub MOMO steering wheel model ‘Trek R’ with TREKFINDER steering wheel hub – EXCLUSIVELY available from Naktanenga! The TREKFINDER steering wheel hub has a TÜV parts certificate and, in combination with MOMO steering wheels, is therefore uniquely suitable for use on German roads! You will need a steering wheel hub to install the MOMO steering wheel. The MOMO TREK R steering wheel is an elegant, classic 3-spoke steering wheel with chrome spokes and an air leather grip area. MOMO steering wheels are characterised by their extremely high-quality workmanship. During development, particular attention was paid to a sporty appearance and a high level of grip. Screws for attaching the steering wheel are included in the scope of delivery. The leather cover with Land Rover emblem can be purchased OPTIONALLY here. Technical data: Model: TREK R Surface material: Genuine leather, black; chrome-plated spokes Seam colour: Black Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate included. A TÜV inspection is required. Size comparison with the RAID sports steering wheel: You will need a steering wheel hub to install the steering wheel. If you already have a MOMO sports steering wheel, you can continue to use its hub. Defender up to model year 2014 and serial number up to EA999999 KK807 for vehicles with 36 splines/teeth and 17 mm diameter KK810 for vehicles with 48 splines/teeth and 19 mm diameter Defender from model year 2014 and serial number from FA000001 KK811 for vehicles with 48 splines/teeth and 19 mm diameter If you have a Defender up to model year 2014 and serial number up to EA999999, you must first determine the number of splines/teeth and the diameter on the steering column. Please note: Leather steering wheels are subject to particular wear and tear as they are constantly being touched. Leather is a natural product that shows signs of wear over time, such as abrasion, brittleness or discolouration. As the material is open-pored, hand perspiration and skin oils gradually soak into the leather. However, hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or maintain it regularly (approx. every 3 months). Good cleaning and care products are available from specialist retailers.
Prices incl. VAT;
LOF Clutches brake kit series IIA & III for front or rear axle 11".
Series IIA & III, 11" Front Brake Kit (4 cylinders up to MY83) / Rear Brake Kit (all up to MY83). LOF Series IIA & III 11" front brake drum kit from LOF Brakes.LOF wants to make everything better, and let's face it, the stock brake drums currently on the market are terrible, so they set out to make the best! Description: Series IIA & III, 11" front brake kit (4 cylinder to 83) from LOF Brakes.2 important things have been corrected in the kit:Drum runout accuracy - LOF has managed to produce the 11" drums to a maximum tolerance of 40 microns runout and 50 microns out of roundness, which is tighter than any other brake drum manufacturer.The shape and precision of the brake shoes are matched to the drums and the brake compound is designed to prevent squeaking and juddering! All vehicle owners will know what is meant! They have also fitted the brake shoes with a solid, correctly shaped rivet to hold the spring in place. You will know that cheaper brands have a straight cut rivet that tends to fall out! Notes on Defender brake parts:all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation. What is included in the POWERspec kit? Front brake kit '( 4 cylinders up to MY83) 2x LOF 11" drums (Cross Ref part number 576973 &; 516599) 4x LOF 11" series brake shoes (Cross Ref part number RTC3417) 2x 243743 right cylinder (Delphi brand) 2x 243744 left cylinder (Delphi brand) 6x barrel retaining screw part 1510 4x Shoe spring core 234889 1x RTC3176 adjuster kit 1x LOF Ceratec brake grease Rear brake kit ( all up to MY83) 2x LOF 11" drums (Cross Ref part number 576973 &; 516599) 4x LOF 11" series brake shoes (Cross Ref part number RTC3417) 1x RH Delphi brake cylinder part 243296 1x LH Delphi brake cylinder part 243297 6x barrel retaining screw part 1510 2x Top shoe spring 548169 2x Bottom shoe spring 531893 1x RTC3176 adjuster kit
Prices incl. VAT;
Lifting Spring Set for JEEP Renegade 4WD BU Model TRAILHAWK by TREKFINDER + 30 Millimetres
Suspension lift kit TREKFINDER for JEEP® Renegade +30 millimetres the lift is approx. +30 millimetressuitable for the Renegade 4WD type BU model ‘TRAILHAWK’.A suitable version for the standard model of the Renegade 4WD Type BU can be purchased here.The standard shock absorbers can still be usedScope of delivery: 4x TREKFINDER coil spring 1x TREKFINDER sticker 1x piece parts certificate
Prices incl. VAT;
Turbolader Rumpfgruppe für Defender TD4
Turbocharger Hull Assembly for Defender TD4 Turbocharger hull assembly forDefender (all models with 2,4l TDCI Puma) Turbocharger trunk assembly forDefender (all models with 2.2l TDCI Puma)
Prices incl. VAT;
Storage compartment footwell, Land Rover Defender TD4/TD5, driver/passenger side, black powder coating
Storage compartment footwell for Land Rover Defender TD4/TD5 Every Landy draws attention, for sure, but often enough it’s the unwanted kind from thieves and car burglars. That’s where this nifty and inconspicuous modification comes in for Defender models Td5 and Td4 (90/110/130) – whether camping conversion, expedition vehicle or your regular standard spec Landy. Our hidden underfloor locker for the front footwell is integrated in the floor panel and thereby creates a lot more security for your valuables. Secured by a lock, dust- and watertight and in most cases hidden by floor mats, the underfloor boxes are the ideal storage space for all those extremely important small things: documents, passports, wallets, expensive electronics, gadgets, tools, medication etc. Sporting a volume of ca. 7 liters, this roughly square storage box will hold an astounding amount of your most valuable items. Since the boxes are mounted underneath the footwell floor, we make them from extremely robust, powder-coated stainless steel. Installing the assembly kits for Td5/Td4 in the right or left front seat footwells is really simple. Other areas in the vehicle body are also suitable for mounting the locker, the cargo hold for example. In these cases, you can order the box also without the panel. If you own non-standard Defenders or older models, where the Td5/Td4 panels won’t fit, you should also choose the “locker only” option. The same applies if you simply want to make the cuts yourself in the existing floor panels. Important during installation: the flattened edge of the box must always face the centre of the vehicle during installation! Please note, if a tank or other additional attachments are mounted below the bottom plate, it is not possible to mount the storage box. Material: Box: Stainless steelFootwell panel: Aluminum
Prices incl. VAT;
Running board round tube, for Land Rover Defender 90/110
Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.
Prices incl. VAT;
EBC Turbo Groove Brake Disks - performance sport discs
EBC Turbo Groove Disc These EBC Turbo Groove performance brake disks offer outstanding performance favoured by sports drivers while maintaining road capability for everyday use. EBCs Turbo Groove Brake Discs feature a slot design that runs to the outside edge of the disc allowing the dust, debris, gasses and carbon deposits to be spun off from the braking disc surface, further improving braking under severe off-road driving conditions. Instead of being through drilled, blind drilled dimples prevent cracking and help to break down surface gasses of the brake disc/rotor to further improve braking under heavy load. Gold-coated for optimal corrosion resistance. Made in Europe and machined using a high quality alloy that is capable of running up to incredibly high temperatures. These discs are intended for Road, light race, rally and track day use. Features wide aperture grooves to prevent dirt from building up so the disc is kept clean minimising wear zinc anti-corrosion coated castings stop them rusting, keeping them looking good behind your wheels dimple hole construction prevent cracking and warping increasing the life of the discs For many verhicles these disks can be supplied with German vehicle operating permit/licence - TÜV approval is not required. Please choose your vehicle:
Prices incl. VAT;
Seat cover for Suzuki Jimny2 type GJ/HJ
Seat covers for Suzuki Jimny II (model: GJ, from year of manufacture: 2018 / model: HJ) Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. available in these variants: Driver's side Passenger side Rear seat Driver and passenger side Driver's side, front passenger's side and rear seat Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
MOMO Trek steering wheel with anodised spokes, incl. TREKFINDER steering wheel hub
EXCLUSIVELY only available at Naktanenga! MOMO steering wheel model “Trek” with TREKFINDER steering wheel hub MOMO steering wheel "Trek" with TREKFINDER steering wheel hub - EXCLUSIVE! Only Available here! The Hub ships with a TÜV parts-certificate and is street legal in combination with the MOMO steering wheel! To install the MOMO steering wheel you can not get around a steering wheel hub. The MOMO "TREK" is a beautifully designed steering wheel with 3 spokes and an air leather, suede, and leather finish. Its design follows that of popular motorsport steering wheels. MOMO steering wheels set themselves apart with phenomenal craftsmanship. During development, the looks and grippy feel of the steering wheel were the main focus. All hardware is included. The optional Land Rover Logo can be purchased here. Details: Model: TREK Finish: genuine leather, black; anodized spoke Color of stitching: black Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. In comparison with the RAID performance steering wheel: Attention: A steering wheel with a leather finish is especially delicate due to the constant gripping. Leather is a natural product and over time sings of wear can appear, eg. rubbed off areas, brittle areas, or a change in color. Since the material has open pores especially sweat and dirt from the hands tend to damage the steering wheel. Mainly, sweat is highly aggressive in contact with genuine leather. To protect the wheel and ensure a long life, we suggest you either wear gloves or tend to the leather every three months. The necessary supplies you can find in specialized stores.
Prices incl. VAT;
Trekfinder Wheel Spacers for Land Rover Defender 90/110, 66mm per axle
Aluminium spray widener for Defender 90/110 66mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70 per cent lighter than ordinare spacers made from steel. Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 66 mm per axle (2x 33 mm) material: aluminium alloy colour: black alignment: center alignment vehicles: Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate. Please note: The wheel spacer is not suitable for Dotz Dakar rims, as this rim has a built-in wheel spacer of 25 mm.
Prices incl. VAT;
LOF POWERspec front full brake kit for Suzuki Jimny , various models
LOF POWERspec front full brake kit for Suzuki Jimny , various models The LOF POWERspec Brake kit is designed for Heavy loaded Jimnys, Our Discs and Pads are of an ‘OEM’ spec, made to the same Quality and Tolerances as Original Genuine brake components. Our POWERspec kits come complete with fitting kit, including fasteners, Pins, anti rattle shims and the correct grease where necessary! Discs: Dimpled and grooved, with black phosphate finish for corrosion resistance and removal of Debris & Heat. Pads: Performance Organic/ Ceramic friction material. R90 Approved Brake pads for use in Europe + Rest of world! POWERspec Pads: We have designed the LOF POWERspec Brake range for tuned and modified hard working trucks. A high braking effect, Upgraded coefficient of friction (0.47) Designed for fast road use, stopping highly loaded vehicles including towing vehicles. POWERspec pads have edge chamfers which reduce noise, Pads are uncoated, minimal bedding in required. Pads include noise reduction coating shim on the rear of the pad. Scope of delivery Kit : 2x LOF POWERspec high-carbon front brake discs - dimpled, grooved and black phosphated 4x LOF POWERspec brake pads, performance fast road friction with mechanical wear indicator 4x brake caliper sliders with rubber bellows 4x brake caliper slider bolt 4x brake pad retaining clips, where applicable 2x packets of LOF Ceratec brake grease Disc dimensions Suzuki Jimny 1.3L (MY 98-2018): Diameter: 290mm Thickness: 10mm Height: 46mm Centre bore: 108 mm Disc dimensions Suzuki Jimny 1.5L (MY 18-24): Diameter: 290mm Thickness: 10mm Height: 46mm Centre bore: 108mm
Prices incl. VAT;
EBC Turbo Groove Brake Disks - performance sport discs
EBC Turbo Groove Disc These EBC Turbo Groove performance brake disks offer outstanding performance favoured by sports drivers while maintaining road capability for everyday use. EBCs Turbo Groove Brake Discs feature a slot design that runs to the outside edge of the disc allowing the dust, debris, gasses and carbon deposits to be spun off from the braking disc surface, further improving braking under severe off-road driving conditions. Instead of being through drilled, blind drilled dimples prevent cracking and help to break down surface gasses of the brake disc/rotor to further improve braking under heavy load. Gold-coated for optimal corrosion resistance. Made in Europe and machined using a high quality alloy that is capable of running up to incredibly high temperatures. These discs are intended for Road, light race, rally and track day use. Features wide aperture grooves to prevent dirt from building up so the disc is kept clean minimising wear zinc anti-corrosion coated castings stop them rusting, keeping them looking good behind your wheels dimple hole construction prevent cracking and warping increasing the life of the discs For many verhicles these disks can be supplied with German vehicle operating permit/licence - TÜV approval is not required. Please choose your vehicle:
Prices incl. VAT;
Military towing bumper, front, all Defenders - available here!
Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130 Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting.Delivery incl. bolt and retaining clip. Surface: optionally black primed or hot-dip galvanised. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
NOLDEN LED multifunction light Jeep Wrangler JK
Clear visibility for your Jeep Wrangler JK For easy installation in the original bumper or compatible bumpers for the Jeep Wranlger JK, the new LED multifunction light from Nolden is suitable. It combines a daytime running light (DRL), fog lights and a position light / parking light in a compact 90mm housing. The mounting frame allows the installation in the Wrangler / Wrangler Unlimited (from model year 2007), the fog light is adjustable. The required control unit is integrated. Technical data: Dimensions: 90x63 mmLED type: 1x Osram Ostar, 1x Osram OslonVoltage: 12 V / 24 VApproval: ECE and SAEConnector (fog light): H8 / H11Connector (daytime running light and parking light): AMP SupersealColours: Chrome / Black The price refers to a set with two headlights. The headlights are available in black and chrome, please select the desired variant below.
Prices incl. VAT;
Turbocharger trunk assembly for Defender TD5 & Discovery II (TD5)
Turbocharger trunk assembly for Defender & Discovery II (2.5l TD5) This high-quality turbocharger trunk assembly is suitable for all Land Rover Defender and Discovery II models with 2.5 litre TD5 diesel engines. Ideal as a replacement for defective or worn units - for optimum performance and longevity of your vehicle.
Prices incl. VAT;
Turbolader Rumpfgruppe für Defender Tdi & Discovery I (Tdi) & Range Rover Classic (Tdi)
Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 300TDI) Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 200TDI)
Prices incl. VAT;
various door seal sets for Land Rover Defender
Door seal sets for Land Rover Defender - Perfect fit & robust for any terrain Whether replacing classic standard equipment or retrofitting for better sealing: Our selection of door seal sets for the Land Rover Defender offers the right solution for almost every model and year of manufacture. The high-quality seals (original or replica) ensure noticeably less wind noise, reliable protection against water and dust - particularly important for off-road driving or daily use in all weather conditions. Choose from different sets for driver and passenger doors, rear doors and side doors - all custom-fit, durable and easy to fit. More comfort. Less noise. Better sealing. Make your Defender fit for every adventure - with the right door seals from our range.
Prices incl. VAT;
Aluminium Alloy rim ZU 7x16" ET11, for all Defender 90/110/130, Disco 1, RRC
High-quality 7x16" ET11 aluminum rim Aluminium Alloy rim ZU 7x16" ET11 offset, only 10.4 kg load weight 1,400 kg - comes with TUV approval. Fits all Defender 90/110/130, Discovery 1, Range Rover Classic. Standrad LR wheel nuts for alloy rims are needed! Rim size: 7x16" ET 24 Land Rover Defender rims (except the original rims) must be stud-centered. Standard wheel nuts for LR alloy rims are required! Weight of the 16-inch rim: 10.7 kg Please note: The rims require individual approval for the Defender 130. Please contact us by telephone or email for more information. We recommend balancing the rims for the Land Rover Defender using bolt or centre circle centring.
Prices incl. VAT;
CargoBear - Crossbar sloping/low - for Land Rover Defender
Nakatanenga CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector Material: Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights
Prices incl. VAT;
Trekfinder Wheel Spacers for Land Rover Defender 90/110/130, 46mm per axle
Lightweight aluminium wheel spacers (46 mm) - set for front & rear axle, with parts certificate 46 mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. Defender 130 rear max load weight needs to be lowered to 2 tonnes. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70% lighter than ordinare spacers made from steel.Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 46 mm per axle (2x 23 mm) material: aluminium alloy colour: black alignment: center alignment vehicles: Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic Please note: With the rear axle unloaded, the wheel spacer can also be used for the Land Rover Defender 130. These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate.
Prices incl. VAT;
Mirror arms foldable for Land Rover Defender until BJ2016
Adjustable mirror arms Thanks to their unique fastening mechanism, nothing flutters, even at high speeds. The real highlight, however, is the mirror's folding function. Simply open the Torx screw, fold the mirror down by 90° and the field of vision to the rear is extended many times over.Especially for vehicles with a living cabin or when driving with a trailer, these mirror arms offer real added value! There is no need to attach mirror extensions.Product features: unique mirror flip mechanism precisely manufactured from high-strength aluminium corrosion & UV resistant coating also fit the original Land Rover Defender hinges set includes two pieces Length approx. 19cm Note: When using these mirror arms, the use of a mirror heater is not necessary.
Prices incl. VAT;
Windscreen, green, tinted and heated for Defender up to MY2016
Windscreen Defender, tinted and heated - for all Defender up to year of manufacture 2016 You can find matching sealing rubber for the windscreen HERE in the shop. Please note: This item can only be collected locally in Berg bei Neumarkt (postcode: 92348) - shipping is not possible! Please arrange an appointment for collection in advance. Please feel free to contact us by e-mail or telephone.info@nakatanenga.deTel. : ☎ +49 9181 466 644
Prices incl. VAT;
MOMO TUNER STEERING WHEEL - BLACK, incl TREKFINDER steering wheel hub
MOMO steering wheel Model "Tuner" with TREKFINDER steering wheel hub - only available at Nakatanenga! The TREKFINDER steering wheel hub has a TÜV parts certificate and, in combination with MOMO steering wheels, is therefore uniquely suitable for use on German roads! You will need a steering wheel hub to install the MOMO steering wheel. The MOMO TUNER steering wheel is an elegant, classic 3-spoke steering wheel. The black spokes and red stitching round off the look of this small, easy-grip steering wheel! MOMO steering wheels are characterised by their extremely high-quality workmanship. During development, particular attention was paid to a sporty appearance and a high level of grip. Screws for attaching the steering wheel are included in the scope of delivery. The leather cover with Land Rover emblem can be purchased OPTIONALLY here. Technical data: Model: TUNER Surface material: Genuine leather, black; black spokes Stitching colour: red Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate included. A TÜV inspection is required. You will need a steering wheel hub to install the steering wheel. If you already have a MOMO sports steering wheel, you can continue to use its hub. Defender up to model year 2014 and serial number up to EA999999 KK807 for vehicles with 36 splines/teeth and 17 mm diameter KK810 for vehicles with 48 splines/teeth and 19 mm diameter Defender from model year 2014 and serial number from FA000001 KK811 for vehicles with 48 splines/teeth and 19 mm diameter If you have a Defender up to model year 2014 and serial number up to EA999999, you must first determine the number of splines/teeth and the diameter on the steering column. Please note: Leather steering wheels are subject to particular wear and tear as they are constantly being touched. Leather is a natural product that shows signs of wear over time, such as abrasion, brittleness or discolouration. As the material is open-pored, hand perspiration and skin oils gradually soak into the leather. However, hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or treat it regularly (approx. every 3 months). Good cleaning and care products are available from specialist retailers.
Prices incl. VAT;