Shop by vehicle
Alloy rim AEZ Panama High Gloss 8,5x20" ET38 5x120
Aluminium rim AEZ Panama for Land Rover New Defender Cross-spoke design with a payload of up to 1,025 kg. Technical specifications: Rim size: 8.5x20"Press-in depth: 38 mmColor: silver or blackBolt circle: 5x120Payload: up to 1.025 kg Among other things suitable for the Land Rover New Defender.
Prices incl. VAT;
Assembly flat rate Scheelmann sports seat
Installation flat rate for Scheelmann seats with or without seat heating, for Land Rover Defender with or without pre-equipped seat heating. Price for 1 seat. The installation effort differs significantly depending on whether the seat to be installed has seat heating or not and whether seats with seat heating were already installed in the vehicle. Please select the applicable variant. Please note: The price refers to the installation fee only, the product to be installed must be purchased separately. When ordering, please include your telephone number for the necessary appointment. The assembly is only possible on site in Berg bei Neumarkt (postal code: 92348).
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td5, galvanized steel, 4mm
Transmissionguard, galvanized steel 4mm, for Land Rover Defender TD5 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
▷ LOF Clutches ROADspec clutch TD5 for dual mass flywheel
ROADspec TD5 for vehicles with dual mass flywheel LOF Clutches’ goal was to deliver the best clutch kit for Td5 Discovery and Defender with dual mass flywheel. They have engineered this product with two specific objectives: first, to prevent the typical vibrations for Td5 and second, to guarantee long lasting service from clutch and flywheel. The ROADspec clutch is specifically designed for your daily road-going Td5 Defender or Discovery. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than original. Perfect for vehicles with a Stage1 map/ 400Nm / 180 bhp. Description: LOF heavy duty friction material Billet machined center hub High quality release bearing 1x G90 high-temp assembly grease Clutch cover Nyloc fasteners 1x CNC wire-formed anti-rattle wire spring clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well. Legal Disclaimer: Technical modification can result in noise generation. This is not detrimental to the vehicle’s reliability or performance and therefore no cause for complain! Modifications to the vehicle are undertaken at your own risk without warranty for any damages to transmission and drive train.
Prices incl. VAT;
LOF Kupplungen ROADspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, Kupplungssatz
ROADspec Isuzu Rodeo 2.5 CRDi / 3.0 CRDi MY2002-2012, Clutch Kit The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original) Description Perfect for vehicles with a Stage1 map/ Towing 1x LOF HD Drive plate, fitted with Woven organic friction 1x LOF HD ROADspec clutch cover, +20% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Isuzu Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Retrofit kit / wiring harness for heated windshield on Defender (until MY2016)
Heated windshield wire harness complete with Carling Contura switch for Defender equipped with OEM style heated windshields with two tabs or wires - one in each corner. Carling switch will require assembly. The kit requires minimal connections such as positive and negative terminals, ignition power and lighting power. The kit is rated at 20 amps with a turn-on time of approximately ten minutes and is suitable for use with the heated window part number CMB000411 or equivalent. The power cable is 500 mm long and is terminated with M8 rings from the relay set to the battery. The supply cable for the heated screen is 3000 mm long and terminates with an insulated lug socket. The screen grounding cable is 500 mm long and is supplied with a cable lug socket and an M8 ring terminal. suitable for heated windshield here in the store.
Prices incl. VAT;
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16" ET -5
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16" The High Peak J-01 light alloy rim 16 inch is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ / HJ Rime size: 6x16"OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.de☎ +49 9181 466 644
Prices incl. VAT;
Spare wheel holder Land Rover Defender aluminium corrugated, anodised
Spare wheel holder Land Rover Defender, anodised aluminium Spare wheel holder for the bonnet of Land Rover Defender Td5 and Tdi, aluminium riffle, for TD5 with reinforcement plate inside, anodised incl. fixing material as well as holding plate with three bolts made of stainless steel.The reinforcement plate is only required for the TD5 and is only supplied there.
Prices incl. VAT;
Overhead console Land Rover Defender - transverse
Roof console Land Rover Defender - transverse Roof console for Land Rover Defender 90/110/130, is mounted crosswise to the direction of travel, provides a DIN slot and storage space. The Nakatanenga switch bundle with 7 on/off switches is suitable for mounting in the DIN slot.Not suitable for vehicles with sunroof.Available in grey and black.
Prices incl. VAT;
Lock set with steering wheel lock, 3 cylinders and 2 keys for Defender TD4
Steering column lock with door lock cylinders complete set Defender Steering column lock with three door lock cylinders and two keys for Land Rover Defender from VIN 2A622424 model year 2002.Note: The scope of delivery does not include shear bolts!Shear bolts can be found here in our store.
Prices incl. VAT;
Cranked trailing arms
Cranked rear trailing arm - for optimum axle geometry on Land Rover Defender 90/110/130 This offset trailing arm for the rear axle was specially developed for the Land Rover Defender 90, 110 and 130. Thanks to its offset design, it improves the axle geometry on vehicles with a higher suspension and ensures greater driving stability - both on and off the road. Pair, incl. axle-side bushes, black powder-coated Take your Defender to the next level in terms of performance and off-road capability!
Prices incl. VAT;
Terrafirma Heavy Duty Track Bar / Panhard Rod, adjustable
Heavy Duty adjustable track bar / Panhard rod For Land Rover Defender, Discovery 1 & Range Rover Classic - For axle centring when raising the suspension.Our high-quality Panhard rod is the ideal solution for correcting the axle position on vehicles with a suspension lift. It is suitable for various Land Rover models, including Defender Td4, Td5 and Tdi Discovery 1 Range Rover Classic Please select the appropriate model year of your vehicle.
Prices incl. VAT;
LOF Clutches POWERspec Brake Kit Series IIA & III
Series IIA & III, 10" Front Brake (1971-81) / Rear Brake (1971-85) LOF Series IIA & III 10" front brake drum set from LOF Brakes.LOF wants to make everything better, and let's face it, the stock brake drums currently on the market are terrible, so they set out to make the best! Description: Series IIA & III, 11" front brake kit (4 cylinder to 83) from LOF Brakes.2 important things have been corrected in the kit:Drum runout accuracy - LOF has managed to produce the 11" drums to a maximum tolerance of 40 microns runout and 50 microns out of roundness, which is tighter than any other brake drum manufacturer.The shape and precision of the brake shoes are matched to the drums and the brake compound is designed to prevent squeaking and juddering! All vehicle owners will know what is meant! They have also fitted the brake shoes with a solid, correctly shaped post rivet to hold the spring in place. You will know that cheaper brands have a straight cut rivet that tends to fall out! Notes on Defender brake parts: all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs that have an R90 designation. So what is included in the kit? Series IIA & III, 10" front brake (1971-81) 2x LOF 10" (SIII) drums 4x LOF 10" series brake shoes 1x LH Delphi brake cylinder part 243296 1x RH Delphi brake cylinder part 243297 6x barrel retaining screw part 1510 2x Shoe spring core 503981 2x shoe spring core 218983 1x RTC3176 adjuster kit 1x LOF Ceratec brake grease Series IIA & III, 10" REAR WHEEL BRAKE (1971-85) 2x LOF 10" drums 4x LOF 10" series brake shoes 1x LH Delphi brake cylinder part 243303 1x RH Delphi brake cylinder part 243302 6x drum retaining screw part 1510 2x shoe spring core 503981 2x Shoe spring core 218983 1x RTC3176 adjuster kit 1x LOF Ceratec brake grease
Prices incl. VAT;
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15", offset: -5
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15" offset: -5 After the great response to the J-01 wheel, we wanted to do something different with the second original design. We present you the HIGH PEAK J-02 15-inch alloy wheel, front. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU). TÜV type approved and strength tested. Also compatible with JB43 (1998-2018) models. Made in Italy. Guaranteed European quality Bolt-on mounting with standard or raised chassis. No additional modifications required (depending on tyre size). Rim size : 6x15"OFFSET : -5Bore / PCD : 5x139.7Finish : anthracite or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.de☎ +49 9181 466 644
Prices incl. VAT;
Brake Calliper Service Kit for Land Rover Defender
Longevity for your brake system Brake calliper service kit for Land Rover Defender 90 / 110 / 130, consisting of stainless steel brake pistons and matching sealing kits. While there is only one possible configuration for the Defender front axle, two different sizes of brake pistons have been fitted to rear axles. To avoid additional delivery costs we like to ask you to measure the pistons on the rear axle - they should be either 41.2 mm (small) or 46.0 mm (large). As these pistons are made from stainless steel they won't rust and thus also won't damage the seals. You need 8 pistons and two sets of seals for the front axle and 4 pistons (either small or large) and one set of seals for the rear axle. To further protect the brake callipers from the elements and corrosion, we offer these kits optionally with black brake caliper paint. Please choose the desired brake calliper service kit.
Prices incl. VAT;
Installation kit Suzuki Jimny GJ / HJ with Nolden 90mm combination fog light with daytime running light
Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life. With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light. Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play. If you only need the adapter cables, you can find them here. The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights. Scope of delivery: 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome Adapter: 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin. Note: The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard. Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).
Prices incl. VAT;
LOF Clutches ROADspec clutch 200/300 TDI
ROADspec TDI 200/300tdi This ROADspec clutch is specifically designed for your daily road-going Land Rover 200 or 300 Tdi. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than the original. Description: LOF heavy duty friction material High torque sprung center hub High-quality NSK release bearing G90 high-temp assembly grease CNC wire-formed bearing retaining clip CNC wire-formed pushrod retaining clip High tensile bolt pack for clutch cover Pedal weight not heavier than the original NOT SUITABLE FOR ENGINES WITH UPGRADED TURBO (VNT/ HYBRID), Please see 2.8 TGV HS INTERNATIONAL CATEGORY. You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well.
Prices incl. VAT;
LOF Clutches ROADspec clutch series III
ROADspec Serie III The Series III Land Rovers ROADspec clutch is specifically designed for your daily road-runner. If you do a bit of towing now and then, perhaps some light off-roading or just use your Landy as a commuter, then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little more poke than standard! And by the way, the pedal weight is not heavier than the original. Description: HD thermofiber friction material High torque sprung center hub High quality NSK release bearing G90 high-temp assembly grease CNC wire-formed bearing retainer clip 1x OEM spigot bush 1x OEM fork bush
Prices incl. VAT;
LOF Clutches ROADspec clutch series I & II
Serie I & II ROADspec 9″ Clutch Kit LOF clutches have developed their own clutch kit for Series I & II. This Clutch kit with its organic friction material is far stronger than the original and suits 1.6, 2.0 & 2.25l petrol and Diesel, 6-cylinder petrol engines and also V8 conversions. Included in this kit: LOF 9″ clutch plate with organic material LOF Serie I & II 9″ clutch cover Spigot bush Syringe with grease LR part numbers: cover 591705, 9" plate 591704
Prices incl. VAT;
Recovery eyes red for New Defender rear - 1 pair
Towing and recovery eyes for the New Defender - Robust. Conspicuous. Indispensable. Do you want your New Defender to be not only stylish, but also absolutely suitable for off-road use? Then our red towing and recovery eyes are just the thing for you! This set of 1 pair of eyelets for the rear of your New Defender combines high functionality with a striking design - perfect for anyone who wants to be prepared for any adventure. Why towing and recovery eyes for the New Defender? Whether off-road, on unpaved roads or in an urban environment - sometimes you simply need a reliable way to secure or recover your vehicle. Our towing and recovery eyes offer you the safety and robustness you need to be prepared for any situation. And all in an eye-catching red colour that is not only practical, but also a real eye-catcher. Advantages at a glance: High-quality materials: The eyelets are made of robust cast steel and offer maximum resilience. Eye-catching design: The bright red not only ensures better visibility, but also gives your Defender a striking look. Easy to fit: The eyelets have been specially developed for the New Defender and can be installed without modifying the vehicle. Versatile: Perfect for towing, recovering or securing your vehicle in any situation - an always-ready mount for tow ropes and recovery straps. Who are the towing and recovery eyes suitable for? Off-roader: For all New Defender drivers who are travelling off the beaten track and want to be prepared for any situation Adventurer: Perfect for outdoor enthusiasts who want to be able to recover their New Defender safely even in the most difficult terrain. Design lovers: If you want to give your New Defender a sporty and functional look, these eyelets are the perfect choice.
Prices incl. VAT;
LOF Clutches POWERspec Nissan X-Trail MKI 2.2 Di MY2001-2007 Clutch Kit
POWERspec Nissan X-Trail MKI 2.2 Di MY2001-2007 Clutch Kit The POWERspec is the next stage up, ideal if you use your Xtrail as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 9x Clutch cover bolts, coated in loctite 1x Nissan Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches ROADspec clutch series IIA
Serie IIA ROADspec Clutch Kit LOF clutches have developed their own clutch kit for Series IIA. This Clutch kit with its organic friction material is far stronger than the original and suits 2.25l petrol and Diesel, 6-cylinder petrol engines and also V8 conversions. Included in this kit: LOF 9″ clutch plate with organic material LOF Serie IIA 9″ clutch cover Spigot bush Syringe with grease LR part numbers: cover 571228, 9" plate 8510290
Prices incl. VAT;
Underride Protection Heavy Duty TREKFINDER for SUZUKI Jimny 2 Type GJ BJ from 2018 and Type HJ
Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions. Additionally and for an even easier instalation, all the nuts and bolts are already included.
Prices incl. VAT;
Suspension Bushing Set (without shock absorber) for Land Rover Defender TDI, TD4 and TD5
Replace in good time to prevent damage to the fixed components! Bushes are by and large the first components in the chassis suspension that degrade due to ageing generally or mechanical, thermal and chemical exposure specifically. If they don’t get replaced in time, the first warning signs you’ll experience are rattling or clanking noises, deterioration of handling and impaired road safety. Ultimately, critical damages to the solid components can occur, from radius arms to shock absorbers. This applies specifically to vehicles like Defenders, operating under heavy duty conditions both off- and on-roads and particularly when towing trailers. Our complete OEM replacement kits include bushes for the entire suspension (except for shock absorbers) for Defenders Tdi, Td5 or Td4. As a general rule, in order to maintain handling integrity and prevent imbalances in the suspension system, it is highly recommended to replace the entire kit once severe wear and tear occurred. Please select the variant BUSE-TD4-OSD for Defender TD4 up to year of manufacture 2009 and up to chassis number ...9A768936or the variant BUSE-TD4-OSD-2016 for Defender TD4 year of construction 2009 and from chassis number ... 9A768937
Prices incl. VAT;
Boost style rim silver 7x16" ET33for Land Rover Defender, Discovery 1 and Range Rover Classic
Alloy wheel 7x16 " for Land Rover Defender, Discovery 1 and Range Rover Classic Technical specifications: rim size: 7x16"Press-in depth: 33 mmSilver You can find suitable hubcaps here.
Prices incl. VAT;
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today. Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request. Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated Integrated recovery eyes (22.5 mm diameter) The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 4-piece
Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet, black powder-coated. Delivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Additional reversing light for Land Rover New Defender from MY 2020-2025
Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.
Prices incl. VAT;
LOF CLutches POWERspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit
POWERspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Jimny Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 2-piece
Chequer plate cladding for the bonnet Finally also available for the Land Rover Defender Td4 from MY07: chequer plate trim for the new bonnet (black powder-coated) This article is bulky goods. Material thickness: 2.5 mm base thickness / 4 mm incl. corrugation (quintet plate)
Prices incl. VAT;
TREKFINDER Damper for LANDROVER Defender 90 / 110 / 130 by KONI RAID - Front Axle
Maximum off-road control - TREKFINDER KONI RAID shock absorbers for Defender This TREKFINDER damper fits the Defender 90 / 110 / 130 Discovery 1 Range Rover Classic front axle by KONI Heavy Track RAID - suitable for vehicles with lifts up to +5 cm. This part is sold per piece.
Prices incl. VAT;