LED signal lamps for Land Rover Defender, different sets
Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains: 1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain: → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Rubber floor mats, rear, for Land Rover Defender 110, MY 1987 - 2016
Rubber floor mat rear, for Defender 110Rubber mat for the 2nd row of the Land Rover Defender 110 Station Wagon 5-door, fits models from 1987 to 2016. Protect the interior of your Land Rover Defender 110 Strong, durable and tailored for a perfect fit, these rubber floor mats will protect your Defender from dirty, muddy boots and shoes. Product Information: Material: RubberColour: BlackPlacement: 2nd rowWeight: 5.47 kgWidth: 480 mmHeight: 25 mmLength: 870 mmScope of delivery: 1 pair
Prices incl. VAT;
Nakatanenga protective grille type Q Bundle / Set
Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light
Prices incl. VAT;
Stainless steel fixing set for Land Rover Defender 110 HT (2-doors)
Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us The screws' heads are identical to the original Defender screws!!! Set comprises ca. 390 pieces. With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings. The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads). In addition special bonnet rubber screws are supplied, too. The fixing sets are clearly arranged in 10 individual bags for ease of fitting: rear body hinges rear body fixings grille load bay strip and cat eyes bonnet hignes rear crossmember spare wheel carrier headlight surrounds and front wing covers side door hinges inner door sills and A post + 2 rubber screws + anti-seize paste Very easy, DIY fitting possible. We supply anti-seize paste for all screws. Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB). Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Prices incl. VAT;
Chequer plate cover plate for Land Rover Defender tailgate outside, from MY02
Checker plate cover plate for Defender 90/110 Cover plate for the rear door of the Land Rover Defender 90/110 (outside), material: anodised aluminium (3mm), different colours available, is mounted instead of the original spare wheel holder. The use of anodised aluminium has the advantage that the plate does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below. In model year 2002 there was a change to the rear door, unfortunately it is not possible to differentiate purely by model year here. Until 2002 the door was made of aluminium and the window was glued in. From 2002 onwards, the rear door was made of steel and the window is fixed by means of a rubber seal. The dimensions of the cover plate is 45x28 cm (from 2002). Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Nakatanenga Lamp Bracket for Land Rover Defender, without lamps
Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted hanging down) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. When the lamps are mounted upright, the vehicle height is minimally increased. The one-piece bracket is made entirely of stainless steel, glass bead blasted and powder coated. It has four mounting eyes for individual headlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the headlamp connection cables (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. For a neat installation, we recommend the Aquasignal cable grommet for the roof (so the light bar also remains easily removable) as well as our power distributor with fuse holder. Please also note our bundles with price advantage: Nakatanenga Lightbar with 4 Vision-X LED Worklights UMX Nakatanenga lamp hanger with 2 Vision-X LED spotlights LPX Nakatanenga lamp hanger with 4 Vision-X LED spotlights Cannon Not combinable with the original Land Rover lamps and also not with Mantec lamps! Please select the desired colour of the lamp hanger. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:
Prices incl. VAT;
Cargo net incl. fixing material, Suzuki Jimny II type GJ/HJ
Cargo net incl. fixing material, Suzuki Jimny II The smaller the car, the bigger the challenge to make the best use of available space inside. Our cargo mesh for the Suzuki Jimny II (from MY2018) will generate a lot of storage room in a place that’s rarely used: under the roof in the cargo bay.To attach the 93 x 60 cm netting to the roof trim, all you need to do is mount two aluminum frame elements in the front and the back. They are the same color as the mesh for a seamless look. The elastic cargo mesh can then be attached to the frame and the interior grab handles with 12 adjustable straps. To make it easier for you to fill the mesh space, there are also two click buckles in the front for easy access.Light and flat pieces of equipment, sleeping bags, textiles and the like will find the perfect storage space inside the mesh, even in a fully loaded Jimny.If you do not have handles on the headlining, 2 ring nuts are supplied to attach the net. Additionally, you can thread an elastic string in a zigzag shape on the underside of the netting for all those lighter items you want quick access to: light blankets, towels, swimming or sports gear etc.The cargo mesh comes in the colors black, gray and coyote. Please note: When ordering, please be sure to state in which model (GJ or HJ) you would like to install the Cargo Net, and also whether you have an interior light (Comfort Plus equipment) in the GJ model. Pictures may vary.
Prices incl. VAT;
HD Spring for Land Rover Defender 110/130 rear right (red-green)
HD rear right spring - Land Rover Defender 110/130 For maximum load capacity and driving stability This heavy duty coil spring has been specially developed for the right rear installation on Land Rover Defender 110 and 130 models. It is the ideal solution for vehicles that are regularly on the road with high payloads or heavy accessories. Color code: red/green Price per piece
Prices incl. VAT;
AIR INTAKE / AIR INTAKE WOLF XD STYLE, year of construction 1994-2016
AIR INTAKE / AIR INTAKE WOLF XD STYLE, year of construction 1994-2016 „Wolf“ Military Defenders see action in all climate zones and all kinds of environmental conditions. From the wet and cold in the north to the mud of the tropics and the sand and dust of the deserts. One specific modification for these extreme challenges can be spotted with the naked eye: the air intakes. When not equipped with snorkels, XD Landy-wolves feature raised air intakes, often on both sides, to keep water, mud and dust out of the intake system. If you want to give your civilian Landy (with intake on the right) this military Wolf look, you can replace the standard grill with our Wolf XD Style Air Intake. This is not only a great visual upgrade to your Defender, but also protects your intake system from splash water, mud and dust. Due to its design, the Wolf Style intakes will already pre-filter a lot of unwanted stuff getting near your intake, especially when compared to the standard grills. So, if you’re aiming at an upgrade in design and performance, but don’t want to spend the 600 € or more for the hard-to-get original parts (ESR4570), the Wolf XD Style Air Intakes are the ones for you. For off-roaders with truly amphibious ambitions, who rather have water in the footwells than the intakes, we recommend our SN4 or SNX snorkels, of course. Installing the Wolf Style Air Intake is really easy. The frame can be attached to the pre-existing screw holes. The intake itself and the gasket are then in turn attached to the frame. All fastening materials are included. Delivery: Frame, intake case, gasket, fastening material. Will only fit Defenders with air intake on the RIGHT. Please note: Depending on the year of manufacture, the hole pattern on the fender may not match the hole pattern of the retaining frame exactly and adjustment work may be necessary.
Prices incl. VAT;
Chequer Plate Cowling Tank Spout Land Rover Defender
Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.
Prices incl. VAT;
EBC Greenstuff 6000 Brake Pads for 4x4 and SUV
EBC Greenstuff 6000 Brake Pads EBC Greenstuff 6000 brake pads have been designed for heavy off-road vehicles and SUV that need to be stopped fast and efficiently both on and off the road. The Greenstuff pad is tried and tested and is proven to stop your car approx 20 feet (9 metres) quicker than standard Pads from 60mph which is a an impressive braking improvement of 15% offering better brake effect up to 600°C (1100°F) with almost no brake fading. The Greenstuff pads will work better at higher temperatures than standard pads giving you confidence for spirited street driving and perform well on cars under 200bhp. Features: capable of repeated heavy brake use without brake “Fall-Off”. very minimal disc/rotor damage characteristics. ECE R 90 type approved for most cars. features red “brake in’ surface coating for instant safe braking after install. The brake pads are supplied in pairs, i.e. as a full set for one axle. The pads can be supplied for a large variety of vehicles. Please choose your desired vehicle:
Prices incl. VAT;
Cargo Net Mesh for Land Rover Defender until BJ 2016
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
Running board round tube, for Land Rover Defender 90/110
Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.
Prices incl. VAT;
Dashboard Console for switches and additional instruments
Versatile console for installing 3 or 5 round instruments, switches, displays and sockets Console for installing either up to 3 or 5 round instruments (52 mm) or various switches, displays, sockets etc. Supplied unequipped! Whether rev counter, exhaust gas temperature display, our useful second-zone thermometer or a socket - over time, the need for flat surfaces in the vehicle cockpit that allow clean installation increases. With the two dashboard consoles, this problem is solved regardless of the vehicle - only a flat surface is required. The plastic front panel of the consoles can be easily cut out or drilled so that a variety of different displays, switches and instruments can be mounted. The console can be mounted vertically or suspended on any flat surface. It is ideal for accommodating the Carlingtech Contura switches, the VDO 52 mm round instruments or the BlueSea 12 V and double USB sockets. Dimensions DSBU-3: 230x105x80 mm Dimensions DSBU-5: 344x105x80 mm Please select the desired size of the console.
Prices incl. VAT;
LED rear fog lamp for Land Rover Defender until MY2016, 95mm, clear. Ready to plug in!
LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.
Prices incl. VAT;
Valve cover gaskets for TD4 and TD5
Valve cover gaskets selectable for different vehicles: Td4 - suitable for 2.4 Diesel from MY 2007 Td4 - suitable for Defender Puma 2.2l TD5 - suitable for Discovery 2, Defender from MY 2004TD5 - suitable for Discovery up to MY 2002
Prices incl. VAT;
Beam wiper blades for the New Defender MY 2020
Beam wiper blades for the New Defender Looking for replacement wiper blades for the windscreen of your New Defender? Then we definitely have a recommendation for you. These wipers from VALEO deliver exactly what their name suggests: Silencio! And it's not just VALEO’s marketing department – a French global automotive supplier – that says so, because we've tested them ourselves, thoroughly. When you buy VALEO Silencio, you are guaranteed top European quality in terms of materials, workmanship and accuracy of fit. This combination ensures excellent wiping performance over the entire surface without jerking or rubbing and also - as the name Silencio promises - extremely quiet operation. VALEO uses VisioRubber, a rubber technology that combines the best properties of natural double density rubber with synthetic exterior coating. In our own tests, we experienced far superior efficiency and very quiet wiping without squeaking or smearing. In our opinion, the trade-off with a comparatively shorter service life of these wiper blades is of little consequence given the impressive advantages. As with all quality wipers, the installation is uncomplicated. Fits all variants of the New Defender (MY 2020). Set includes two wiper blades.Product size 55x2x3cm
Prices incl. VAT;
LED Tail Light / Brake Light for Land Rover Defender, 95mm, smoke grey. Ready to plug in!
LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!
Prices incl. VAT;
Nakatanenga LED Interior Light Hunter, Universal (not Defender), warm white
Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)
Prices incl. VAT;
KONI HeavyTrack shock absorber Land Rover Defender / Disco 1 / Range Rover Classic - front axle
Precision and Control for Your Steering Axle If you want to elevate the handling of your Land Rover Defender, Discovery 1, or Range Rover Classic to a new level, especially concerning steering precision and control in off-road conditions, the KONI HeavyTrack shock absorbers for the front axle are the top choice. Nakatanenga presents you with these high-performance dampers, specially designed to maximize the performance of your steering axle while providing robustness for off-road use. Why KONI HeavyTrack shock absorbers on the front axle of your Land Rover make the difference: The KONI HeavyTrack series is the answer to the diverse demands placed on modern SUVs and classic off-road vehicles. They combine superior on-road handling with unyielding performance off the beaten path: Significantly improved steering behavior: Experience more direct feedback from the front axle, more precise steering maneuvers, and significantly reduced body roll in corners. Your vehicle will feel more agile and controlled. Optimal damping for every situation: The shock absorbers react sensitively to changing road conditions and ensure maximum tire-to-ground contact. This not only improves traction and braking performance but also overall driving safety. Individually adjustable rebound damping: A hallmark of KONI quality is the ability to adjust the dampers' rebound to your personal driving style, vehicle load, or wear. This adjustability ensures long-lasting optimal performance. Built to last (almost): The use of the highest quality materials and advanced manufacturing technologies makes KONI dampers extremely resistant to the rigors of off-road driving and guarantees a long service life. Precise tuning for the front axle: This specific model has been carefully developed for the dynamic requirements of the front axle of your Land Rover Defender, Discovery 1, or Range Rover Classic. It harmonizes perfectly with standard as well as lift springs. The decisive upgrade for your Land Rover suspension Whether in daily use, on expeditions with a full load, or on challenging off-road tracks – the KONI HeavyTrack shock absorbers for the front axle are a guarantee for a confident driving experience. This investment in the suspension optimization of your Land Rover pays off with an increase in safety, comfort, and driving pleasure. Nakatanenga is at your side not only with the right shock absorbers but also with comprehensive expertise for your Land Rover suspension. All advantages at a glance: Excellent road holding and increased comfort Improved vehicle stability and superior steering precision Superior off-road performance Adjustable damping force (rebound) for individual customization Premium quality and exceptional durability Tailor-made for the front axle of Defender, Discovery 1, Range Rover Classic Give the front axle of your Land Rover a top-class performance upgrade with KONI HeavyTrack shock absorbers! Secure yours now conveniently online at Nakatanenga – your partner for first-class off-road equipment. Note: For optimal suspension balance and performance, we always recommend replacing shock absorbers axle by axle (i.e., in pairs at the front or rear). On this occasion, also check the condition of your shock absorbers on the rear axle.
Prices incl. VAT;
LOF Clutches POWERspec Brake Pads for Defender
4x Brake Pads - LOF Brake Pad and Mounting Kit POWERspec brake pads: LOF POWERspec brake pads are designed for tuned and modified hard working axles.High braking power, improved coefficient of friction (0.57). Designed for fast road use to stop heavily loaded vehicles, including tractors.POWERspec brake pads have edge chamfers that reduce noise but do not reduce service life, uncoated, minimal scattering required. The pads have a noise reducing washer on the back of the pad. Notes on Defender brake parts: All brake pads offered for the Defender have an R90 designation and are therefore registration-free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation. 1. LOF brake pad mounting kit for : Defender 90/110/130 front axle (MY1994-2016) What is included in the kit? 4x LOF 50V brake pads (ROAD/POWER) 1x STC8575 installation kit 1x LOF Ceratec brake grease 2. LOF brake pad installation kit for : Defender 110/130 rear axle (MY 1998-2016) What is included in the kit? 4x LOF 110 brake pads (ROAD/POWER) 1x 4105 mounting kit 1x LOF Ceratec brake grease 3. LOF brake pad mounting kit for : Defender 90 rear axle (MY 1994-2016) What is included in the kit? 4x LOF 90 brake pads (ROAD/POWER) 1x STC8574 mounting kit 1x LOF Ceratec brake grease
Prices incl. VAT;
Silver Heritage Headlight plates in aluminium, powder coated
Headlight surrounds Heritage Style aluminium Heritage Style - silver Matching to our silver Heritage grille: Silver headlight plates with inlets and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, silver powder coated Select the colour of the headlight rings. 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130. You can find the heritage-style headlight surround in black here.
Prices incl. VAT;
Mounting material for 2 pieces Koni / RAID shock absorbers below
Mounting material for 2 pieces KONI/ TREKFINDER Heavy Track RAID shock absorber 90-5375SP1 + 90-5471 below Mounting material for the pin fastening of the shock absorber - suitable for LAND ROVER Defender models up to approx. 2001 ( no pot mounting ) Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces self-locking nut
Prices incl. VAT;
Twin-Monotube-Projekt AT 20 9x20“ ET40 black for New Defender
Twin Monotube Project AT – uncompromising 20" rim for genuine Defender use For the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts certificate especially for new Defender, suitable for orig. 20 inch factory AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted as mentioned in the certificate. Furthermore optimum offsets to avoid grinding contact on brakes or wheel arch/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra. Twin Monotube Project-AT20 Rim, 9x20", concave for front and rear Offset 40 5x120/72.6 Wheel connection M14x1.5 tapered 60 degrees Wheel load: 1000 kg For tyres: 20" Series new Defender Suitable for winter use: Yes incl. parts certificate and wheel nuts Also available as complete wheel sets with different tyres:Radar Renegade or BF Goodrich All Terrain KO2.
Prices incl. VAT;
ServiceKit Land Rover Defender 300Tdi
ServiceKit Land Rover Defender 300Tdi Set contains branded filters in original equipment quality.For comparison, we have added the matching Land Rover part numbers.1x Air filter (ESR2623)1x Oil filter (ERR3340)1x Fuel filter (diesel) (AEU2147L)1x Oil pan gasket (UAM2847L)
Prices incl. VAT;
Dirt D-Fender Wheel Arch Extensions for Land Rover Defender
Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish.
Prices incl. VAT;
Parking heater AUTOTERM (Planar) 2D 12 Volt complete set for Land Rover Defender
Complete set of AUTOTERM Air 2D parking heater for Defender The parking heater set AUTOTERM (Planar) 2D12 for the Land Rover Defender consists of all important components needed for the installation of a parking heater. Included in the delivery are the AUTOTERM 2D 12 Volt parking heater, our Nakatanenga parking heater console, the Nakatanenga mounting plate, a fuel tank extraction, a Webasto air outlet with 60 mm connection, 30 cm warm air pipe and a vibration damper.As a low-priced and powerful alternative to our Webasto parking heater kits, the AUTOTERM (=Planar) 2D parking heater is proving to be a real sales hit. This is partly due to the particularly compact dimensions, which allow installation even in small cars, vans, off-roader motorhomes, construction machinery, boats or in difficult installation situations. In the off-road / 4x4 sector, it is ideally suited for the "typical" off-road vehicles such as Land Rover Defender, Mercedes G or Jeep Wrangler JK.These are only a few of many reasons why we now offer the AUTOTERM (Planar) 2D 12 V parking heater in a clear and comprehensive complete set for the Land Rover Defender at an economical price. For both the Tdi/ Td5 and the Td4, we offer one set each with a perfectly matching accessory kit.You can select different front panel cut-outs for the parking heater console included in the scope of delivery. The associated connections are available in the classic cigarette lighter format (12 V) or as 5 V USB charging sockets for Apple iPhones, navigation devices, iPads and smartphones and are included in the scope of delivery.The parking heater can also be operated while driving.Running time: The AUTOTERM parking heater switches off automatically after 2 hours of operation. However, as soon as you press a button during operation, the parking heater continues to run indefinitely until it is switched off manually.Scope of delivery:- AUTOTERM 2D parking heater 12 volt incl. silencer, intake air hose, heat protection hose, tank intake pipe and corrugated exhaust pipe.- Optionally analogue control unit simple control (PU-5) with rotary control or digital control unit comfort control (PU-29) with time switch- Nakatanenga parking heater console incl. the selected connections- Nakatanenga mounting plate- Fuel filler cap- Webasto air outlet with 60 mm connection, rotatable- 30 cm warm air pipe (diameter: 60 mm)- Vibration damper- Fixing material (screws, nuts, clamps, shrink hose, cable ties)Technical data:- Fuel type: diesel- Heating capacity: max. 1.8 kW, min. 0.8 kW- Volume of heated air: max. 75 m³/h, min. 34 m³/h- Fuel consumption in operation: max. 0.24 l/h, min. 0.1 l/h- Power consumption in operation: max. 29 W, min. 10 W- Weight: 3 kg (independent heater)- Manual start/stop → On the Autoterm.cz site you will find a calculator for the correct dimensioning of the air heater,You can choose between two control elements:- Simple Control (PU-5) element with rotary control: The old PU-10 control element had a relatively inaccessible control surface. Therefore, the reliable control element with rotary control is now the new improved standard of the Planar parking heaters! With the rotary control, you can adjust the heating power of the parking heater and regulate the power of the ventilation in ventilation mode! The PU-5 control element with rotary control can also be purchased separately here.- The digital control element comfort control (PU-29) with timer has an OLED display and an understandable and clear interface. Temperature, ventilation and power can be configured via the display and the various buttons. With the timer, you can easily set the start of the parking heater to a specific time. The digital control element with timer can also be purchased separately here.Setting options comfort control (PU-29):- Temperature and power (adjustable for the parking heater, the control panel and for an external heater).- Time and date - Operating language (English or Russian)Functions of the timer comfort control (PU-29):- Memory function: save the time so that the parking heater starts at this time every day - Configurable memory locations: Up to 3 different weekdays with different times can be set and saved. The AUTOTERM (=Planar) 2D12 is equipped with an altitude kit.This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content drops. The maximum heat output decreases proportionally to the amount of oxygen in the air. Roughly speaking, from 2,000 metres the loss of output per 500 m altitude is approx. 5%. Manufacturer tests up to 3,440 m were trouble-free. Up to 4,000 m no difficulties are to be expected. Up to 5,000 m the software calculates itself - but this could not yet be tested at real altitude. Important:Especially when used at high altitude, the free travel of the fan is extremely important!Route the combustion air intake and exhaust extremely short and with low resistance - i.e. no kinks, no blockage or reduction. It should also be noted that operation beyond 3,000 m is still a technical compromise. Again, care should be taken to ensure that the combustion chamber is properly heated on a regular basis. The chamber must be burnt free of soot deposits. Soot deposits can also form on heaters that are permanently operated at the lowest setting. Therefore, the following still applies: No guarantee for sooty combustion chambers!In order to ensure the longevity of the heater, you should also free-burn it occasionally at low levels. The combustion chamber reaches full temperature after running at full load for about half an hour. Normally, no further maintenance is required. In case of extreme loads, e.g. during longer overnight stays at more than 4,000 m, the combustion chamber including the seal set should be cleaned if necessary. To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate. https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment
Prices incl. VAT;
High Performance Exhaust Manifold for Land Rover Defender / Discovery Td5
Fan manifold Land Rover Td5 incl. high-strength manifold bolt M8 and gaskets For all Land Rover Defender / Discovery Td5 Engineered for high performance or modified vehicles. This prevents bent manifolds or broken bolts. The package includes heavy duty bolts and seals. This is motorsport equipment and NOT street legal !
Prices incl. VAT;
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Prices incl. VAT;
Underside protection, 8mm Alu, black powder coated, New Defender - available here!
Underside protection, 8mm aluminum, black powder-coated, for Land Rover New Defender from BJ 2020 No 4x4 with serious off-road ambitions can do without underside protection in the front and the engine area. Stones, debris, branches, steep slopes and much more can easily damage the oil pan, mechanical components, radiator, tubes or electrics in rough off-road conditions. Our Nakatanenga front undershields for the New Defender (MY 2020 and later) are superior to the original Land Rover part. They are virtually identical in size, shape and positioning, but here's the difference: our Nakatanenga guard is made from 8mm aluminum! Compared to the OEM part with its 5 mm, that's an increase of a whopping 60%! But that's not all: our front undershield is not only more robust and shock-resistant, it even beats the OEM accessory in price. More performance, less cost - that's how it should be. The front undershield is mounted to existing screwholes and is completely powder coated in black. Fastening materials are included. MADE IN GERMANY!
Prices incl. VAT;
Rubber mount for 1 piece Koni / Trekfinder RAID shock absorber top
Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece
Prices incl. VAT;
Nakatanenga Ventilation Panels Side Windows - Jeep Cherokee XJ (1984-2001), Nissan Navara D40
Nakatanenga ventilation panels side window - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 Suitable for: Jeep Cherokee XJ (1984-2001) Nissan Navara Double Cab D40 The Jeep Cherokee XJ and Nissan Navara are classics for off-road enthusiasts and individualists. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made of durable aluminum and tailored to fit the Cherokee XJ, make this possible — no comparison to rattling universal solutions. Powder-coated in black and supplied in pairs, they blend discreetly into the classic look and increase comfort on tours and excursions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 410 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;